First do the following checks.

Still need help? Read the next section.

Make sure your iPhone has a SIM card

You cannot activate iPhone without a SIM card. Find out more about it here: How to set up iPhone without a SIM card.

Could not activate iphone ?? The activation server cannot be reached.? Solution is here

Necessary actions

If you still can’t activate your iPhone, try using iTunes.

  • Make sure you are using the latest macOS or iTunes.
  • Check if your computer has an Internet connection.
  • Using the supplied cable, connect your iPhone to your computer. Find your device on your computer.
  • Wait for the computer to detect and activate the iPhone:
  • If it says “Set up as new” or “Restore from backup”, it means your iPhone is activated.
  • If your computer displays a SIM card incompatibility error message, contact your service provider.

Rollback to iOS 10.3.3

The activation problem appeared after the release of iOS 11. If the failure appears after downloading a new firmware version, then try rolling back from iOS 11 to iOS 10.3.3. Procedure:

  • Connect your device to your computer using the original USB cable and launch iTunes.
  • Download the iOS version you want from another site. Try to use only proven resources.
  • Switch to iTunes and click on the smartphone-shaped icon (in the upper left corner).
  • Click the Overview tab. In the left part of the window, click on the “Restore iPhone” button, while holding down the Shift (for Windows) and Alt (for Mac) keys on the keyboard.
  • In the window that appears, select the firmware file that you want to install on the iPhone. If it does not appear, then make sure you press the correct key on the keyboard.

Confirm the download of the new iOS version and wait for the installation to complete. During the process, the smartphone may turn on and off several times. As soon as the firmware is loaded, a system notification will appear on the screen. Only then can the device be disconnected from the computer.

Additional help

If restoring iPhone doesn’t help, contact Apple Support.

There are many reasons why you might see an “iPhone could not be activated” or “Could not activate iPhone” error when trying to set up your iPhone. In this tutorial, we will look at the causes of the activation error and possible ways to fix the error that will help you set up your iPhone.

Apparently, a lot of people are having difficulty activating their new iPhone X, so if you find such an error, know that you are not alone.

But activation issues are not limited to iPhone X. There have been issues with people being unable to activate their iPhone after updating to iOS 11. Although this issue mostly affects iPhone 5S or earlier.

wait a bit

It is possible that the servers at Apple are busy (especially if there is a new iPhone or an iOS update). Check the Apple Activation Server status by visiting the Apple System Status page here. LINK

Activation could not be completed

You may be having problems connecting to the Internet or iPhone.

try again

At first glance, it seems that the activation failed message is completely inactive, you do not see the control or retry buttons. However, if you click on the physical round iPhone button, a menu appears from which you can: call emergency services, start over, or change the Wi-Fi connection settings. Click “start over” to retry activation, if the second time it failed, you should try a few more times. Some users note that activation takes place normally on 5 attempts. Perhaps the reason for this is busy servers or other reasons and a little patience will help solve the problem.

use a working SIM

If you have a different SIM card and are sure it works, try using it. When replacing the SIM card, you do not need to turn off the iPhone, just replace it, press the Home button and try activation again.

Another important note: the balance of your SIM card must be positive, and the amount on the account is sufficient for one SMS abroad.

This is not advertised anywhere, but this is how the problem with the activation of iMessage and Facetime is solved. We found that in order to confirm the activation of these services, the iPhone is apparently trying to send a technical hidden SMS to the Apple servers. A technical SMS is sent from your phone to a special number, so the balance on your SIM card must be positive and sufficient for such an operation.

your, iphone, failed, activate

Confirmed! Activation actually sends SMS, which is charged as “SMS to other countries”.

Four tips on what to do if you can’t activate your iPhone and see an activation error

If you find yourself in a situation where you decided to reset your iPhone to factory settings, tried to set it up as a new device and saw the “activation failed” error, you try again, but it does not help, you again see a tablet with the text below what to do in such a situation?

“Your iPhone could not be activated because the activation server is temporarily unavailable. Try to connect iPhone to iTunes to activate, or try again in a few minutes.

If the problem persists, contact Apple Support: “.

try another wifi network

First of all, make sure you are connected to a working Wi-Fi, some, very few routers may be the culprit for this problem, as they block iPhone access to Apple servers. Therefore, in some cases, connecting to a normally functioning router solves this problem.

restore iPhone

If none of the above helps, try turning off your iPhone, connect one end of the USB cable to the Mac, and do not insert the other into the iPhone yet, hold down the Home button and at this very moment insert the USB cable into the iPhone. If everything went well, iTunes will show the message “iTunes has found iPhone in recovery mode. You must restore your iPhone before using it with iTunes. ” Then click the Restore iPhone button and follow the instructions.

Try activating your iPhone through iTunes

Connect your iPhone to your computer, open the latest iTunes and try to activate your smartphone. This method is best used if you do not have the opportunity to connect to another Wi-Fi network.

Restart iPhone

Problems with activating the iPhone can be solved after a banal reboot of the smartphone. Restart your device and try activating it again.

Insert SIM

New iPhone owners are often in such a hurry to get to know their device that they completely forget about the need to install a SIM card. In this case, the smartphone does not need to be rebooted. the activation process will continue immediately after installing the SIM card.

If the SIM card is inserted, then you need to make sure that it works. Try using a different SIM card and retry activation.

How to Skip “Unable to Activate” on iPhone

Use a different Wi-Fi connection

A Wi-Fi connection blocking the smartphone’s connection to Apple servers may be one of the reasons why you cannot activate your iPhone. Please try another wireless connection and try again.

When trying to activate, it fails: “Your iPhone could not be activated because the activation server is temporarily unavailable

Activating iPhone is a simple process and is made by the developers from Apple intuitive, however, problems can arise here too. One of the most common errors is associated with the message “Your iPhone could not be activated because the activation server is temporarily unavailable”. we will tell you how to get rid of it in this manual.

your, iphone, failed, activate

During iPhone activation, you may encounter various errors, the list of which is listed below:

  • Your iPhone could not be activated because the activation server is temporarily unavailable.”
  • IPhone is not recognized and cannot be activated for service
  • “The SIM card is not supported on this iPhone.”
  • “ITunes cannot check the device”

If one of these messages is displayed on the screen of your iPhone, try our tips. one of them will definitely help you cope with the problem situation.

Restore iPhone via iTunes

In most cases, the first four tips will solve the problem with activating the iPhone, however, if all else fails, it’s time to connect the “heavy artillery”. Restoring iPhone is done as follows: while holding and holding the Home button, connect the smartphone to the computer. The device will be recognized by iTunes in recovery mode, after which you will need to click the “Restore” button.

One of the buttons broke

Inactive keys are a serious problem. Without them, the phone will not be able to fully function. But you can turn it on, you need to put the device on charge, after a while it will wake up on its own.

If none of the methods helps, then the reason lies within the device. Better to take the phone for repair right away.

Important! If fake chargers have been used in the past, they could negatively affect the phone’s battery. After replacing it, the device will start working again.

SIM card replacement

The problem may lie in a non-working SIM card installed in the smartphone. Very often, this problem occurs if the card was manually cut. In this case, contact the nearest operator’s salon and replace the SIM-card with a new one. As a rule, the re-release procedure is free of charge.


The iPhone is primarily a means of communication, therefore it has all the necessary tools for communication. The Phone and Messages applications, which are classic methods of communication. Apple also has tools to communicate over the Internet, such as iMessage (a tool for transferring messages between devices) and FaceTime (video calls, like those that can be done using Skype).

In addition to the already built-in applications, you can also use third-party ones, which means that any social networks (. “”) and instant messengers (Viber, WhatsApp, Telegram) will migrate to the iPhone together with the user.

It is not forbidden to get in touch with other VoIP services, that is, you can download and start using Skype on iPhone.

Recommendations for solving the problem

To get out of the situation that has arisen and solve the problem with the presence of two phases, first of all, you need to determine the reason for their appearance. If this happened due to a break in zero, you first need to find the place of damage by dialing the zero core with a multimeter.

At the same time, it is necessary to reliably isolate the phase conductor from the already tested and restored “zero”. To eliminate a malfunction caused by old plugs, it will be necessary to urgently replace them with automatic switches that exclude the possibility of wire burnout.

You can make sure that the phase wires are mistakenly connected to both contacts of the socket using an indicator screwdriver. If, when its working end touches both terminals of the socket, the indicator shows the phase (the built-in neon lamp is on), this means that an error occurred during installation. In order to eliminate it, you will need to disconnect one of the wires and connect a neutral conductor in its place.

The most difficult case is the previously described zero shift towards one phase or a break (damage) of the neutral wire. To correct this abnormal situation, you can do the following:

  • In a private house, it will be necessary to measure the voltage of each phase with the same multimeter in relation to the neutral, which was previously checked for integrity.
  • If there is a difference in readings, the currents in the loads should be measured.
  • If the current values ​​differ, it is necessary to try to equalize them by correctly distributing the loads in phases.
  • If damage is found to the neutral core, it will be necessary to replace it with a new wire of a larger cross-section.

In a situation where the indicator shows two phases on an outlet in a city apartment, and all the options considered have already been excluded, you need to contact the housing department with a request to invite a team of electricians. Only specialists will be able to deal with the phase imbalance that has arisen and, if necessary, coordinate the issue of correcting the situation with the technical service of the local substation.

On this issue, a large number of video reviews are presented on the Internet, in which the issues of the appearance of two phases on sockets and contacts of household light sources are explained in detail. We present to your attention some of them:

In the final part of the review, we note that after familiarization with the presented materials, even a non-specialist will be able to try to eliminate the simplest malfunction on his own. All he needs for this is to learn how to handle an indicator screwdriver and a measuring device (multimeter).

Please click on one of the buttons to find out if the article helped or not.

How to create an Apple ID

The difference between Apple and many ecosystems is the clear binding of devices, rights, subscriptions, content and services to a specific user. That is, almost all actions (flashing a smartphone, installing applications, changing critical settings, etc.) are performed not by the abstract “Ivan Ivanov”, but by a very specific person who is assigned a special identifier. Apple ID. Therefore, the creation of an appropriate account must be approached responsibly. use a trusted mailing address, come up with and remember a complex password, and be sure to save the answers to security questions. Detailed instructions on how to create an Apple ID can be found here.

How to Fix Unable to Activate iPhone 2021

Be sure to read this and this Apple ID Hacking article.

Clearing data on iPhone or iPad

How to clean the device, you can learn more in our article (How to reset iPhone to factory settings) or briefly, using the following steps:

  • Reset iPhone. You can roll back the iPhone to the original version using the “Reset iPhone” key (“Settings”, item “General”).
  • Removing settings and content. At this step, you need to select the button “Erase content and settings”.
  • Confirmation. iPhone does not delete data immediately after pressing the keys: to start the cleaning process, you need to confirm your choice.
  • Expectation. Before setting up iPhone, you need to wait until all information is deleted. this takes a few minutes.

If the cleaning process is completed correctly, there will be no information on the iPhone (other than the system information), and the device will display a welcome message on the screen. Did you do everything correctly? You can proceed to the most important thing. setting up your smartphone / tablet.

Restart iPhone

To exclude a system failure that has occurred on the device, you should perform a forced reboot. IPhone restart option will vary by model, as physical keys will be involved.

Flashing smartphone

In case of various Apple software errors, a special DFU mode is provided. an emergency environment that is used to cleanly install the firmware on the device.

  • Connect iPhone to computer with original USB cable and launch iTunes.
  • Enter iPhone into DFU Mode.

Read more: How to put iPhone into DFU mode

When iTunes detects the connected device, click the “OK” button.

The only manipulation that iTunes will offer is device recovery. In the process, the program will download the latest available firmware for your phone model, uninstall the old version, and then perform a clean install of the new one. After the end of the procedure, when the welcome window appears on the screen, try to reactivate the smartphone.

IPhone activation failed. What to do? [UPDATED. There is a solution!]

Failure to activate iPhone on iOS 11. is a problem that many users of “Apple” phones are facing lately. It manifests itself in the inability to activate the iPhone after resetting content and settings or reinstalling iOS. When activating the phone via Wi-Fi, the user sees the message “iPhone activation failed. Your iPhone could not be activated because it could not contact the activation server.” When I try to activate via iTunes, I get an error message with the number 0xE8000013 or 4016 on my computer, or the message “iPhone could not be activated because we could not get activation information from it”.

IOS 11 Activation Issue on Refurbished Phones

Most often, iPhone activation error occurs with owners of refurbished phones. At the same time, here we are not talking about officially restored iPhones, which are produced under the control of Apple, but about Chinese handicraft assembled devices. As a rule, such phones inside resemble a “Frankenstein’s monster”, assembled from different parts. Very often, of the original components on such iPhones, only the processor board remains and it may contain replaced components. Why on such phones most often there is a problem with device activation error?

The problem stems from the fact that in iOS 11 Apple changed the rules for the device activation system. When activated, the components are polled and technical information (UDID, Serial No, IMEI, MAC-Address, etc.) is compared with numbers in the official Apple databases. If, for some reason (and for not officially restored devices, there are about a dozen reasons) the information does not match, the device will not be activated.

How to protect yourself from a problem?

You can check the serial number of your device on the Apple website. If during the check it says “This serial number corresponds to the product that was replaced” or the check displays information about another device that does not match your model, color or memory size, your iPhone may be prone to an activation error. If you own a refurbished iPhone, it is highly discouraged to erase device content or restore software on it via iTunes.

Problems on Apple activation servers

The most harmless option that may be associated with the fact that at a particular moment in time Apple’s activation server is really not available, as indicated in the error message. Check the status of Apple’s web services on a special page and, if the iOS Device Activation service is unavailable, then the solution in this case may be patience and an attempt to activate a little later.

IPhone hardware problems

Activation may fail due to hardware issues with the iPhone. So, for example, if the phone has problems with identifying the SIM card (constant search for the network, regardless of whether the SIM card is inserted or not), the iPhone will not activate. The solution to the problem if the phone does not activate, in such cases can be determined after diagnostics at the service center.

Why iPhone Activation Fails?

There are three main reasons why the iPhone does not activate and displays an activation failure message:

Is it possible to fix a refurbished iPhone with activation error?

There is a solution. It consists in working with a memory microcircuit and making changes to its firmware. Such an operation can only be performed by the hands of an experienced craftsman in a service center with the availability of good specialized equipment. You can carry out such repairs in our service center. Information on the cost and approximate time of execution of works is presented in the table below.

Name of works 3-5 working days

However, the solution is not universal and is not suitable for every case. Since most of the owners of refurbished iPhones face this problem, it is possible to determine exactly whether we can help you only after inspection and diagnostics at the service center. We will be waiting for you and will be happy to help in solving problems with your iPhone!