How to connect the Internet to a computer via phone

Modern phones are able to perform a variety of tasks and greatly simplify our life. For example, using the phone you can connect the Internet to the computer. In this article we will consider this case.

Method phone as a wi-fi access point.

If you have a laptop or your stationary computer equipped with a Wi-Fi module, then for you the easiest way to connect the Internet to a computer via a wi-fi access point will be through a phone. Modern phones are able to create Wi-Fi access points and distribute the Internet through them, which they, in turn, receive from a mobile operator using GPRS, 3G or LTE technology.

In this article, we will demonstrate how this is done by the example of the Android operating system. First you need to open Android settings and find a section there, which is called “other networks”. In some cases, this section may have a different name. For example, on phones with an original Android shell, it is called “more”.

How To Connect Internet From PC to Mobile via Bluetooth | EtazTecH ️

In the section “Other networks” you need to open the section “Modem and Access point” (this section may be called “modem”, “access point”, “modem mode” or “connection of access point”).

In the “Modem and Access point” section, we include the function “Mobile access point”.

After turning on this function, your phone will create a Wi-Fi access point. In order to connect to it, you need to see the name Wi-Fi network and password. To do this, open the section “Mobile access point”.

This section will indicate the name of the access point and the password from it. Using this data, you can connect to the created Wi-Fi access point and gain access to the Internet on your computer.

Method phone as usb modem.

You can also use your phone as a USB modem. In this case, you can connect the Internet to a computer via a phone even if there is no Wi-Fi module on the computer. At the same time, using the phone as a USB modem is even easier than as a Wi-Fi access point. Below we will demonstrate how this is done, using an example of a phone on Android.

First you need to connect your phone to a computer using a USB cable. After the phone is determined by the system, you need to open Android settings on the phone and go to the section “Other networks. modem and access point”, just as we described above. In this section, you need to enable the “USB modem” function.

After that, your system must determine the USB modem itself and connect. Usually, after turning on the “USB modem” function, the Internet on the computer appears in a couple of seconds.

How to turn on the Internet on a computer via a wi-fi phone

The easiest and most convenient way to distribute the Internet from your smartphone to a laptop is using Wi-Fi. In order to do this, you need to turn on the access point:

connect, internet, computer, phone
  • Firstly, you need to go into the smartphone settings;
  • Next, select the item “Modem mode”;
  • In it you need to select the section “Access point”;
  • The final stage is the setting of the access point: creating a password, selection of the type of security and the purpose of the name for the Wi-Fi network.
  • Now you can activate the newly created access point and connect to it from any device (laptop). When connecting, you will need to enter the password that at the previous stage was indicated in the smartphone settings.

The Internet through an access point created on a smartphone works as well as through a router. The speed and stability of the connection directly depend on what conditions the mobile operator offers and how well the smartphone accepts the mobile network signal.

How To Share Internet Connection Form PC To Mobile Without USB Cable || Using PC Wifi Hotspot ||

It is safe to distribute the Internet via Wi-Fi, but only for the condition that the type of protection type WPA2 is indicated in the settings and a rather difficult password is installed. Otherwise, strangers will be able to connect to your Internet. If this happens, then in theory, they will be able to intercept traffic and find out passwords, as well as get information about which sites you visit. Good password. security security.

How to turn on the Internet on a computer via a wi-fi phone

The easiest and most convenient way to distribute the Internet from your smartphone to a laptop is using Wi-Fi. In order to do this, you need to turn on the access point:

connect, internet, computer, phone
  • Firstly, you need to go into the smartphone settings;
  • Next, select the item “Modem mode”;
  • In it you need to select the section “Access point”;
  • The final stage is the setting of the access point: creating a password, selection of the type of security and the purpose of the name for the Wi-Fi network.
  • Now you can activate the newly created access point and connect to it from any device (laptop). When connecting, you will need to enter the password that at the previous stage was indicated in the smartphone settings.

The Internet through an access point created on a smartphone works as well as through a router. The speed and stability of the connection directly depend on what conditions the mobile operator offers and how well the smartphone accepts the mobile network signal.

It is safe to distribute the Internet via Wi-Fi, but only for the condition that the type of protection type WPA2 is indicated in the settings and a rather difficult password is installed. Otherwise, strangers will be able to connect to your Internet. If this happens, then in theory, they will be able to intercept traffic and find out passwords, as well as get information about which sites you visit. Good password. security security.

The second method is usbtunnel

To get started on your computer, go to the Internet connection, then click the tab in addition. A new dialog box will open in front of you, where you will need to allow other users to use the Internet connection of this computer.

It is important to know: this method of distribution of the Internet on the phone with wired way is more complex and long, since for working with the program you will need ROOT access rights. Instructions on how to get them can easily be found on the Internet.

Well, then you will need to perform a few simple actions:

connect, internet, computer, phone
  • To get started, download the usbtunnel utility, and download Androidtool on your computer.
  • Now we move directly to working with the phone. You need to get to the menu and turn on the laying by USB.
  • We connect the phone to PC via standard USB connector.
  • On the computer we launch Androidtool.
  • After the program starts up, click the search for devices. the search for Android (Android) devices. show the list of devices. It is important to know: the program may ask if you have the administrator’s rights to make such significant changes to the work of the devices. Answer yes immediately. Also, the application in places is extremely unstable. Therefore, the program can be knocked out of time.
  • Well, finally, click ready.
  • Also, various requests may appear additional with which in most cases it is necessary to agree. It is important to know: the program will not be crippled that the program will give a system or another error. In this case, all of the above steps will have to be taken from the very beginning.
  • After you agreed with all the requests of the program, in front of you, a joyful inscription “Connect” will appear.
  • Then you will have a request about whether you have a ROOT right on your device. You just need to press the button yes.
  • If all the above actions were performed in the correct order, then connecting to the Internet through the computer will begin automatically.

There are situations when, it would seem, everything is done correctly, but the Internet still does not want to work when wired through a computer. The most common mistakes:

Mobile phone as an access point

The easiest way to connect a computer to the Internet through a mobile phone is to use the “Access point” function. Such a function is in most modern smartphones.

After turning on the “Access point” function, your mobile phone will begin to work as a regular Wi-Fi router, creating a Wi-Fi network with access to the Internet. In order for the Internet to work on your computer via a mobile phone enough to connect to this Wi-Fi network.

It should be noted that the use of the “access point” function has a number of disadvantages:

  • Not every mobile phone supports this function. As a rule, only advanced smartphones provide such an opportunity.
  • Using the “Access point” function leads to a faster discharge of the mobile phone battery.
  • Using the “Access point” function leads to an increased consumption of Internet traffic.
  • To connect to the access point on the computer, a Wi-Fi module must be installed.

Connecting a phone to a Wi-Fi computer for remote control

If you need to connect the phone to a computer via Wi-Fi to control a computer, then there are other solutions for this. Some of these solutions provide full control over the computer, and some allows you to perform only certain operations. For example, the Unified Remote application is well suited for computer control at the base level. This application is available on Android telephone and iPhone, and the server part of the application is available for all popular operating systems, including Windows, Mac and Linux.

In the free version, the Unified Remote application allows you to control the mouse and keyboard of the computer, control the media player and work with files. In the paid version, the possibility of the application is much wider. In particular, it becomes possible to see the desktop and manage third.party programs on the computer.

The principle of operation Unified Remote is quite simple. On the computer to which you need to access, you need to install a special program. This is the server part of the application that provides the ability to connect and control a computer. The server part of the program is free and available on the official website of the application.

And on the phone from which the computer is supposed to be controlled, it is necessary to put an application-client. Using this application, a computer is connection and control.

After installing the server and client part of the application, you can start work. To do this, start the application on the phone, open the left side menu and go to the “Servers” section.

In the section “Server” you will see a computer on which you installed the server part of the application. Click on this computer in order to make connections.

After connection, you will get the opportunity to control the computer. Return to the main screen of the Unified Remote application and select one of the options. For example, in order to control the cursor, select the Basic Input option and run a finger on the phone screen. The cursor on the computer will repeat your movements.

As an alternative to the Unified Remote application, you can advise TeamViewer. This program is a professional tool for remote computer management and provides full control with the display of the desktop. The important difference between TeamViewer is that this program allows you to connect to a remote computer not only via Wi-Fi, but also via the Internet. In other words, you can connect to your computer, regardless of where you are and which local network are connected to.

connect, internet, computer, phone

Connect the Internet laptop via the phone C Windowsphone

On the smartphone you can activate the distribution by Wi-Fi. To do this, the user will first need to enable data transfer on the device itself. You can distribute the Internet on 2G 3G and even 4G networks.

First you need to go to “Settings”. After finding the “data transfer” item and click “Turn on”. After that, it will be necessary to go to the network settings. There choose the section “General Internet” and click “Turn on”. After click on “install”. Thanks to these actions, Wi-Fi will be heard on Windowsphone. So that it is faster, you can put the phone near the window.

Alternative ways to connect a smartphone to a computer

Microsd cards are a convenient and inexpensive way to increase the internal memory of the smartphone. If you can’t connect the smartphone to the computer, and you need to urgently transfer files and photos, use microSD with a card inserted into a smartphone. The computer should have a cartrider or a special USB flash drive in which you can install a memory card.

Most laptops have a built-in SD cards cartrider. By inserting Microsd into an adapter, you can easily transfer data to a computer. But, this method is not suitable if your phone has only an internal memory or not Microsd.

Programs for synchronization of a smartphone with a computer

Mobile devices manufacturers usually create a special program for synchronizing their smartphones with a computer. For example, Apple has iTunes, and Nokia has Active Sync. The remaining companies also produce programs with a lot of opportunities and stable work. But, with universality? Putting your own program for each smartphone is not very convenient!

Therefore, the developers of third.party applications have released their own universal programs. With their help, you can access calls, SMS, messengers, contacts and smartphone files. Let’s look at the best synchronization programs and how to use their phone to a computer with their help.

MyphoneExplorer

This is a free program for synchronizing a smartphone with a computer. You need to download it from the developer’s website, and then install it on the computer. After installing, follow these steps:

  • Connect the smartphone to the computer using a USB cable. The smartphone should be activated “WSB debugging”. How to turn it on, see this page above.
  • Open the program, and after it opens, press the F1 button on the keyboard.
  • The program will ask how you are going to connect to a smartphone. Select “USB-Cabble”.
  • The program will begin to search for your smartphone after it finds it and connects it can work with files and data.

The largest disadvantage of the program is very long synchronization. Of the advantages, I want to note: access to the call list, messages, files, organizer and so on, convenient integration, as well as the ability to control the smartphone from the computer.

Moborobo

Another good program is Moborobo. It also spreads for free. It has the same opportunities and functions as MyphoneExplorer. There is one difference, when you start it, you click not F1, but choose Refreshing button with the mouse.

Like the program described above, it synchronizes a smartphone with a computer and provides access to all the main sections of the phone. Of the minuses, I note, the lack of the Russian language, but the Inte Weese is understandable thanks to intuitive icons. From poles: stylish design and stable connection of a smartphone via Wi-Fi

BYRGPUB.COM 2022