miwatch.ru

xiaomi, wireless, headphones, blinking, white

  • AirDots headphones come in two flavors: from Xiaomi and the recently spun off from the Redmi brand. The first one releases AirDots in white, and the headphone control button is touch-sensitive. Redmi also produces headphones in black, and the control button is mechanical. The principle of operation of Redmi AirDots and Xiaomi Mi AirDots is identical, this article is universal for both models.
  • When synchronizing with a device, in order for both headphones to work, you must first connect the left earphone to the right one, and then connect the right one to an external device (smartphone, PC or tablet)
  • To control the headphones, only one button is used with various press variations, which we will discuss below. The button is located on the outside of the earphone case (see the picture below).
  • If you take one earphone out of your ear, then music playback will continue on the one in your ear. To completely disconnect both headphones, they must be put in a case.
  • Users who do not sync their headphones correctly often face the problem that the left AirDots earphone does not connect, for you we have instructions on how to connect both AirDots headphones to a smartphone, tablet or PC

AirDots color indicator: symbols

  • if the headphones are in the case, and the red color flashes, then the headphones are charging
  • the headphones are removed from the case, if you hold down the buttons simultaneously for 10 seconds, the indicator will turn red, and this will mean that the headphones have turned off
  • the indicator lights up in white quickly. it means the headphones are looking for each other for synchronization
  • the indicator lights up in white slowly. it means the headphones are ready to sync with an external device

We connect both AirDots headphones to a phone or computer

We will immediately determine if the headphones have already been used on another device, or you have already tried to connect them to an external device, then you need to first untie AirDots from the device. If you disconnected the headphones, or connect them for the first time, then go ahead. First of all, they are necessary:

  • We take out both headphones from the case at the same time
  • If the headphones are on, then we hold down the buttons on both headphones for 6-10 seconds until the red indicator lights up. This would mean turning them off.
  • Again, simultaneously hold down the buttons on both headphones for 2-3 seconds, until the indicator on both headphones quickly blinks white.
  • You need to wait a few more seconds for the headphones to sync with each other. In this case, the right earphone (main) will emit a sound signal. At the same time, the indicator on the left earpiece will go out, on the right one it will blink white, but already slowly.
  • Now on your external device to which you want to connect headphones (smartphone, PC or tablet), open the Bluetooth settings. In the list of available devices you will see Redmi AirDots_R or Xiaomi_mi_AirDots_R click on it. In this case, the headphones should not be in the case.!
  • After successful connection, all indicators on the headphones will turn off.
  • If you failed to connect them the first time, do not be discouraged, we advise you to do the whole procedure again, having previously untied the headphones from the devices with which you tried to synchronize.
READ  How to unblock Mi account on Xiaomi

How to Switch Music on AirDots

There is no music player control on AirDots headphones, but there is a life hack that will allow you to do this. It is necessary to call the voice assistant by double-clicking, and ask him to switch the track or change the volume.

AirDots control instructions

  • A single press pauses music, unpauses and continues music playback, answers the call when a call comes in
  • To reset an incoming call, you need to hold down the button for a few seconds
  • Double tap to call the voice assistant. Supports Siri, Ok Google and Yandex Alice.

How to untie headphones from an external device

In order to untie the headphones from an external device, you must first go to the settings of your smartphone, PC or tablet in the Bluetooth section. Find Redmi AirDots or Xiaomi_mi_AirDots in the list of connected devices. Further, the instructions differ in different devices, but the principle is the same. On iPhone, press the i button to the right of the name of the headphones, in the window that opens, select Forget this device. The second stage to disconnect will be to completely disconnect and turn on the headphones. This step is described in this article How to connect both AirDots headphones to a smartphone or PC.

ОБЗОР Xiaomi Bluetooth Headset apt-X НАУШНИКИ СЯОМИ / ВСЕ ПЛЮСЫ И МИНУСЫ

If you still have questions, ask them in the Комментарии и мнения владельцев, or go to our telegram channel there is a link to the chat in which you can get quick and high-quality advice.

9 thoughts on “AirDots: Instructions for use”

The phone does not see the headphones, it does not react to pressing, the diode lights up on the box, how to solve this problem?

And how to make it so that music would play in the video when the shooting was through these headphones

The left earphone does not work at all what could be the problem

turned it off and on several times, as required by the instructions. I press R and only he plays, on L and only he works. I don’t understand what’s the matter

Remove the Bluetooth channel of these headphones from the phone and insert them into the case, and then simultaneously take out and the left one should turn white and go out, and the right one will blink white, then connect to AirDots R and both will work.

I did everything and it works, maybe you did not do it at the same time

Headphones stuck

If your JBL wireless headphones used to successfully connect to your device and then stop, try restarting them:

  • turn on pairing mode;
  • press the power button without releasing your finger for 3-5 seconds;
  • wait until the alternating blinking of blue and red / white starts;
  • start searching for wireless devices on your smartphone / PC / TV again.

Bluetooth is not turned on or connection order is wrong

Check if Bluetooth is enabled on the device you want to connect to. If yes, then check if device search is activated on it.

Important! In most cases, you first need to turn on Bluetooth on the equipment you want to connect to, and only then on the headphones.

At the same time, on some devices, to connect with headphones, you need to force their search to start.

If you connect to a TV or to a TV set-top box, for example Xiaomi Mi TV, then in this article you can see the correct connection procedure using the example of JBL Live 400.

Bluetooth headphones are blinking. what does it mean?

First of all, I would like to draw your attention to the fact that there are a huge number of models of wireless headphones.

  • Firstly, they all have different colored indicators. it can be as one color, for example, white or blue. Or two, most often blue and red or blue and pink.
  • Secondly, depending on the modification, the same blinking “lights” can signal completely different processes
READ  How to make a blinking flashlight on iPhone

Therefore, the first thing to do is to find detailed instructions for your model on the Internet or a box from wireless headphones. And see what it means when certain indicators are on or blinking.

I will give the most common cases.

If the lights flash alternately different (for example, blue and red) or the same color (red, blue, white) on both headphones, this means that two modules are trying to connect to each other, but cannot. In this case, a full reset and re-sync of the headphones will help.

If the LED on only one TWS earbud is flashing. white or blue. then most likely they have already paired and are in connection standby mode. If the phone does not see them, then there is another problem, the solution of which I described in a separate instruction

Blinking red or pink may indicate a problem with the connection to a smartphone or synchronization. Resetting the settings to the factory settings will help. After that, it is additionally necessary to remove the headphones from the device memory

And reconnect them to your phone or laptop

Also, blinking red may mean that the battery in the wireless headphones is low. In most cases, this problem can be accompanied by the fact that if they were previously turned on automatically when they were taken out of the case, now this can only be done with a button. This is the first sign of a low battery

These are the main reasons why Bluetooth headphones are constantly blinking in some color. Some of them are quite normal. Others indicate incorrect work. If you have experience and examples of other errors, then share them in the Комментарии и мнения владельцев.

23 FOR AIRPODS �� Xiaomi Mi airdots 2 SE WIRELESS HEADPHONES

How to connect a wireless headset to your phone

To find out the charge level on the i12 TWS, we have to connect them to a mobile phone. Then this information can be obtained in the quick access menu.

The connection process is simple and will be clear even to an inexperienced user:

  • Take both wireless earbuds out of the case. They will immediately start blinking in different colors. This means that the devices are currently pairing with each other. As soon as the blinking stops, you can search for them in Bluetooth devices on the phone; Headphones are pairing with each other
  • Open a Bluetooth window on your smartphone. You can find it by clicking on the corresponding button in the quick access menu;
  • Find the i12 TWS device in the list and select it. If there are no headphones in the list of Bluetooth devices, please search again; Find the headphones in the list of connected devices or nearby devices
  • Once connected, the headset can be found in the list.

Now you have access to the functions of controlling the playback of a song on your mobile phone player. details on the entire list, as well as signs of a full charge, can be found in the instructions. It is usually included with wireless headphones.

Interesting: how to charge JBL wireless headphones.

How to know that AirDots are already charged

The Redmi company created the headphones under its own brand and gave them the name. AirDots. They have their own unique case in which the musical device is stored.

It, like the wireless earbuds, is equipped with a small indicator, which tells us that the devices are now charging. Or they have already reached a sufficient level of charge. And they can be used. It is important to understand that in Redmi AirDots, the case is able to recharge them even without a wire. It is equipped with small contacts that are located on the “saddles”.

When the wireless AirDots placed in the case are charged, you can tell by the color of the indicator on their case.

READ  How to recover iPhone password via icloud

The indicator on the case also changes color. It can be different depending on the AirDots model. You can also determine the charge level using a smartphone connected to wireless headphones. Check the quick access window immediately after connecting. It should display the information we need.

Bluetooth headphones are blinking. what does it mean?

First of all, I would like to draw your attention to the fact that there are a huge number of models of wireless headphones.

Xiaomi Redmi Airdots Hard Reset and pairing

  • Firstly, they all have different colored indicators. it can be as one color, for example, white or blue. Or two, most often blue and red or blue and pink.
  • Secondly, depending on the modification, the same blinking “lights” can signal completely different processes

Therefore, the first thing to do is to find detailed instructions for your model on the Internet or a box from wireless headphones. And see what it means when certain indicators are on or blinking.

I will give the most common cases.

If the lights flash alternately different (for example, blue and red) or the same color (red, blue, white) on both headphones, this means that two modules are trying to connect to each other, but cannot. In this case, a full reset and re-sync of the headphones will help.

If the LED on only one TWS earbud is flashing. white or blue. then most likely they have already paired and are in connection standby mode. If the phone does not see them, then there is another problem, the solution of which I described in a separate instruction

Blinking red or pink may indicate a problem with the connection to a smartphone or synchronization. Resetting the settings to the factory settings will help. After that, it is additionally necessary to remove the headphones from the device memory

And reconnect them to your phone or laptop

Also, blinking red may mean that the battery in the wireless headphones is low. In most cases, this problem can be accompanied by the fact that if they were previously turned on automatically when they were taken out of the case, now this can only be done with a button. This is the first sign of a low battery

These are the main reasons why Bluetooth headphones are constantly blinking in some color. Some of them are quite normal. Others indicate incorrect work. If you have experience and examples of other errors, then share them in the Комментарии и мнения владельцев.

Why Are Wireless Headphones Blinking White, Blue, Pink, or Red?

Many times, readers have asked me the question, why are wireless headphones blinking blue, white, pink or solid red? At the same time, turning off Bluetooth and turning it on again does not lead to anything. the lights continue to blink alternately. This problem is faced by both the owners of expensive Apple Airpods, JBL or Sumsung Galaxy Buds, as well as budget Xiaomi Redmi AirDots, TWS i11, i12 and others.

Why does wireless headphones light up red?

If the headphones are lit in red, this can also signal a problem in operation or a low battery. Recommendations are the same as with blinking “lights”:

  • Charge the earbuds with the case
  • Reset to factory settings
  • Try to connect again

If the connection error persists, contact the service center.

Guide to Mi True Wireless Earbuds

Home »Xiaomi» Guide to Mi True Wireless Headphones

Play / Pause Music

In standby mode, gently touch the touch panel to play / pause music playback.

Note: The music player must be running in the background.

Switch between headphones and device

During a call, press and hold the touch pad for 1 second to switch between earphone and phone.

Mute / unmute sound

During a call, double-tap the touchpad gently to mute / unmute the sound.

BYRGPUB.COM 2021