Table of Contents

Navigation menu

Xiaomi Redmi 8A does not see the SIM card, although the second SIM card works. In the settings, the SIM is turned on, I also rebooted the phone. How can you solve the SIM card problem on Xiaomi.

The symbol of the crossed out SIM card is lit on the screen of Khiaomi, and the SIM card does not turn on in the settings.

The SIM on Xaomi turned off by itself, and does not turn on anymore. Help restore your phone.

My Xiaomi Redmi 8a does not recognize that the card is inserted. Although they take out the SIM card and insert it into the old phone, and there it works well.

Xiaomi Redmi 8A cannot see SIM card.

During operation, a situation may arise. In which the Xiaomi Redmi 8A smartphone does not see the SIM card. This can be caused by a number of reasons, divided into hardware and software. If the connection with a certain operator is lost, you need to first check. Whether there is a contact on another device. Slot or another person on the card of a similar service provider. It may be that the connection is missing due to malfunctions of exactly that one. Who do you pay to call.

Otherwise, you need to perform several actions with the phone. The first thing to do is to reboot the device. This is often enough for troubleshooting purposes. If there is no effect, go to the settings:

  • Open the submenu “SIM cards and mobile networks”;
  • Select the card you want; make sure it is turned on.

In gadgets from Xiaomi, it is possible to flash the modem without completely rearranging the software on the Redmi 8A. The presence of TWRP recovery is mandatory. do not forget that the independent replacement of important software components affects the warranty. Sign up for repairing Redmi 8A, if the phone does not ring, our competent specialists will help you, here it is inexpensive! In any case, a failed firmware attempt will not turn the device into a “brick”. Incompatible Firmware version can be replaced together with IMEI repair. A spare copy of which can always be made before the procedure.

Xiaomi Redmi 8A does not see the SIM card. 5 ways to solve

xiaomi, redmi, insert, card

How to make the phone “see” the SIM card using hardware methods

It is necessary to pull the card out of the slot and look at the contacts. If there is dirt and oxidation, you should use cotton wool soaked in isopropyl alcohol or an eraser. This is enough to restore the functionality of the element. Clearing contacts in the phone itself is allowed. Do not forget that they must be dry when you turn on your smartphone.

If there is no effect, it is better to look inside. the contacts of the SIM card holder may be deformed due to careless insertion. It is better to entrust the restoration of the structure to a professional in a service center or other workshop. Check the operability of the slot with a card of another operator. It is quite possible that the SIM card needs to be replaced due to wear and tear. In this situation, please contact the nearest mobile service provider office.

Import export contacts to Xiaomi

Do you need to transfer or copy contacts to Xiaomi? In this article you will find information on how to copy or transfer contacts from a SIM card to a phone, from a phone memory to a SIM card, to a Google account, Mi and other options for importing and exporting contacts on Xiaomi Redmi 4X and similar Android devices.

Let’s see where in the Xiaomi settings there are items to transfer and copy contacts. To do this, we need to get into contacts in two possible ways by opening “Contacts” by clicking on the corresponding icon in applications or by opening the “Phone” icon and then select “Contacts” at the top of the screen, as you understand in both cases, we get into contacts.

Here further, some users have a question how to get into the settings and contact management menu. We need to call the contacts settings menu by pressing and holding the touch button in the form of three horizontal stripes located on the left side under the smartphone screen. (Do not just touch, but hold this button a little). Next, we get to the contacts menu, where we select the “Import and Export” item. Look at the attached picture below.

Now we get to the Huawei contacts import and export menu where we can copy numbers to a SIM card, from a SIM card, to a phone, from a phone, to a memory card, from a memory card, to a Google and Mi account, etc. You need to choose which contacts and where you want to copy or move, then I think you yourself will figure out how this is done on your smartphone.

Xiaomi Redmi 8. How to insert SIM and micro SD card in 1minute

For example, the numbers saved on the SIM card were not shown on WhatsApp and I transferred contacts from the SIM card to the phone like this: I chose “Import from SIM card” after which the numbers from the SIM were copied to a file and saved on the memory card, and then I did “Export to memory “and the numbers from the file on the memory card were copied to the phone’s memory.

Unlock the bootloader

Each smartphone from Xiaomi has the function of blocking extraneous system changes. This function was implemented primarily for the sake of security, however, as a result, it can harm our phone and very much ruffle our nerves. That is why almost any firmware of a Xiaomi smartphone, with a few exceptions, must start with unlocking the bootloader. This procedure is strictly mandatory for phones imported from China that are intended for the Chinese market and that have Chinese characters on the box in their names. The installation of the global version of the firmware is performed if the non-original global firmware is currently installed. If the smartphone came to you from China in a sealed box marked on the box with Global Version, then no flashing is required. Just use your smartphone.

To unlock the bootloader and install the global firmware on the Mi 8, we need to take a lot of steps. However, you should not be afraid of this, in fact, everything is simpler than it seems at first glance. Previously, to unlock the bootloader, it was necessary to send a special request for unlocking to the manufacturer on the Xiaomi website. Now this procedure has been simplified a little and permission is issued for each Mi-account automatically. If you are determined to flash your smartphone yourself, rather than seek help from the service, follow the instructions below.

  • We register an account on the Xiaomi website at http://en.miui.com/unlock, if you have not done this before.
  • Next, we need to link our smartphone to the account, or, in other words, log into the account on the phone. To do this, turn off Wi-Fi and use data transfer via the SIM card, which will be used with this account. This is necessary to authorize your phone number, and if you do not do this, then in the future you will most likely receive a message stating that the unlocking of your smartphone has failed.
  • Go to the smartphone settings, then select “phone information” and tap five times on the “MIUI version” item to activate the developer menu.
  • Go to the settings again, select “advanced”, then “for the developer”. Allow “factory unlocking” or, in other words, “OEM unlocking”. Then we need to go to “Mi Unlock Status” and click “Add account and device”, that is, link your smartphone to your account. From this moment, the report of the special counter will begin. Unfortunately, the counter status can only be seen using the MiFlashUnlock program.
  • Next, we need a personal computer or laptop with Internet access. Download and install the MiFlashUnlock program on your PC. Please note that the program must not be older than the second version, otherwise it will in any case ask you to update to a more current version.
  • After opening the program, she will invite us to familiarize ourselves with a small disclaimer. We read and press the button “Agree”.
  • Log in with an account with permission. It is not so important what to use for authorization (email, phone number or ID).
  • Turn off your smartphone. We enter fastboot mode by holding down the power button and the volume down button. The keys must be held continuously for several seconds until a characteristic image of a hare with a screwdriver appears on the screen
  • We connect the smartphone in fastboot mode via USB to the computer and press the “Unlock” button.
  • If everything was done correctly before, then the progress status will reach 99%, after which the program should display a message like “Binding time is too short, Less than 72/720/1440 hours” or “After XX hours of trying to unlock the device “. In the same case, if step 4 is not completed, the program will see this and ask to make a binding.
  • This concludes our active role in unlocking. It remains only to wait until the counter time is reset. You can close the program on your computer, as well as exit the fastboot and use the phone as usual. In this case, in no case leave your Mi-account, otherwise the counter will be updated and you will have to wait again.
  • When the time report comes to zero, run MiFlashUnlock again and repeat the steps from the sixth to the ninth. If everything goes as it should, three green checkmarks will appear, indicating that the bootloader is finally unlocked.
READ  How to Copy Data from iPhone to Computer

After these simple steps, the lock should be removed and you can proceed directly to flashing the phone to a newer software version.

Attention! It is strictly forbidden to upgrade the Mi 8 for the Chinese market to the global version with a locked bootloader. When you try to flash with a locked bootloader, your smartphone will fail.

Xiaomi Mi 8 firmware or how to install global firmware yourself

Xiaomi has always been able to surprise. Both long-time fans of the brand and new buyers who could appreciate all the advantages of Xiaomi over its closest competitors have never remained indifferent to inexpensive, but very high-quality smartphones from the Middle Kingdom. We were pleasantly surprised last year, when the new flagship Xiaomi Mi 8 was released. It absorbed, perhaps, all the best that the company could achieve over the past few years and demonstrated a really high level of technical equipment for 2018.

Nevertheless, Xiaomi smartphones bribe customers not only with a powerful filling and a relatively low cost for such equipment. A very strong argument in favor of Xiaomi phones has always been their proprietary MIUI shell. It has improved with each generation and over the years has managed to really fall in love with many users.

However, as it usually happens, in a huge barrel of honey one cannot do without a small spoon of tar. Stable firmware versions get into the autoload of Xiaomi smartphones rather slowly, and if you bought your phone in China, then you don’t have to wait for an update to the global version over the air. In this article, we will reveal the topic of the Xiaomi Mi 8 firmware and teach you how you can reflash your device yourself, without waiting for the grace of auto-update.

Xiaomi Mi 8 firmware manual for beginners

Perhaps every owner wants to get the latest firmware version for his Xiaomi Mi 8. In this article, we will tell you how easy it is to update your gadget yourself.

Flashing the smartphone using MiFlash

When flashing to the global version of Mi 8, it is best to use the MiFlash program. While there are other ways to update the software on your smartphone, MiFlash can be considered the easiest and most convenient for beginners to use.

Before updating, be sure to back up important data from the internal phone memory and save it to another medium. Do not forget to also charge your device well, during the flashing process, the phone should never turn off. After all the basic preparations have been completed, follow the instructions below:

  • Download the MiFlash program from the website. Make sure the ADB / Fastboot drivers are included with the program and install it on your computer. It is advisable to select the C drive as the installation location.
  • Download the required firmware for Xiaomi Mi 8 from the link. We check that the route to the installation file contains only letters of the Latin alphabet.
  • We put our smartphone into Fastboot mode and connect it to the PC.
  • We launch the MiFlash program. We press the “Refresh” button to identify our smartphone. Then click “Browse” and specify the route to the installation file for the firmware. At the bottom in the program window, be sure to select the leftmost item “Clean all”.
  • We check that everything is selected correctly and click “Flash” to start the firmware.

This completes all the basic steps for updating the software on your smartphone and we just have to wait for the installation process to finish. Of the important, we want to note that before starting the firmware in the program window at the very bottom, we recommend that you never forget to mark the item about full formatting, that is, “Clean all”. This ensures that the update goes through without errors and in the future your smartphone will function as stable as possible.

Speaking of stability, it is worth noting that you do not need to chase the freshest firmware versions. Developers very often roll out firmwares that are still at the beta testing stage. However, if you want your gadget to work as correctly as possible, we recommend that you choose only those versions that have already passed all the stages of verification.

How to insert a SIM card and a USB flash drive into Xiaomi Redmi 4

The now popular Chinese company Xiaomi has released several lines of phones, including such popular models as Xiaomi Redmi 4A, Xiaomi Redmi 3s, Xiaomi Redmi 4 Pro, and many others.

What these models have in common is that the SIM card can be inserted in a completely identical way. How to insert a SIM card in Xiaomi Redmi 4 (and in many other models, for example, in Xiaomi Redmi 4A). this is our article today.

To perform this operation, you will need the Xiaomi smartphone itself, plus a paper clip for opening the tray, which already comes with the kit in the box with the phone. The tray itself is on the left side of the device, and you can also insert a microSD flash drive there instead of a second SIM card.

Sequencing

Here you will see two places at once. for nano and micro SIM cards (in Redmi 3), and a hybrid tray in Redmi 3 Pro, 3X and 3S (instead of a second SIM card, you can insert a memory card there).

It is necessary to install cards in the required connectors, then carefully insert the tray back into the smartphone. If done correctly, you will hear a click and feel that the tray is level with the body of the phone.

How to insert a memory card

Anyone who has repeatedly inserted SIM-cards into his Xiaomi knows that not only they are inserted there. The card in Xiaomi Redmi 4, as always, can be placed in another. micro SD, which serves as an internal storage. It can store pictures, photos, music, videos, install applications and much more. You can do without a flash drive, but the built-in memory is not always enough, so users have to choose. either two mobile numbers or additional space for files.

To install a memory card, you need to perform almost the same actions as in the previous paragraph. insert a paperclip into the hole on the SIM tray, press until it clicks, pull out the tray and insert the SIM card into the first slot, and the SD memory card in the second.

Simultaneous placement of two cards and an SD drive

Yes, yes, there is such a method, but we consider it our duty to warn you: any actions are performed at your own peril and risk, they can harm your smartphone. If you want your Xiaomi smartphone to simultaneously serve both phone numbers and a large number of personal files and programs, follow the instructions below.

To do this, you need to warm up the SIM card under the lighter for 15-20 seconds, and then carefully remove the electronic chip itself from the plastic shell and insert it, as well as the SD memory card into a special slot in the tray. But do this in such a way that the golden contacts do not overlap with each other, but can be recognized and separated by the smartphone as separate. After that, insert the tray into the Xiaomi Redmi 4 Pro, as usual, and check the functionality of this method by turning on the gadget. With a high degree of probability, the phone will see both SIM cards and the memory card at the same time, however, we do not guarantee that the device will not malfunction.

READ  Smartphone Xiaomi Redmi which is better

In any case, we advise you to be careful and not once again risk the integrity and safety of your gadget. it is better to choose one of two real options than to regret your ingenuity over a broken phone later.

How to insert a SIM card into Xiaomi Redmi 8 and 7?

If you do not know how to insert a SIM card into Xiaomi Redmi 8, 7 or Note 7, then now we will teach you this.

This process is very simple and will take you a maximum of half a minute.

Let’s immediately figure out the location of the trays for SIM cards in smartphones Xiaomi Redmi 7 or 8.

If you look directly at the screen, then on the right side of it you will see the power and volume buttons, and on the left. a small tray with a hole.

For clarity, take a look at the pictures below. In this place is the SIM card slot in almost all Xiaomi Redmi:

This slot can accommodate 1 or 2 SIM cards, as well as a memory card. We recommend performing this process with the phone turned off, although this is not necessary.

By the way, due to the fact that Xiaomi adheres to a certain design of its smartphones, the instructions below will also help you insert SIM into Xiaomi Redmi 4, 4x, 5, Redmi 3S, Note 3 and other models of the line.

Xiaomi Redmi 8. How to insert micro SD and SIM

To open the SIM tray:

Q did you know that on Xiaomi you can take a screenshot in different ways?

If you have any questions, ask them in the Комментарии и мнения владельцев.

How to insert a SIM card into Xiaomi Redmi Note 9S?

If you have just bought a Xiaomi Redmi Note 9S, it is important to complete two important steps before you can use it, first you will need to find how to insert a SIM card into Xiaomi Redmi Note 9S to be able to use your smartphone’s phone functions, then connect. to your Gmail account to activate your Android profile. We’ll take a closer look at this guide to help you complete the first of these two steps. We will first see the preliminary steps for installing a SIM card and then how to insert a SIM card into your Xiaomi Redmi Note 9S.

How to insert a SIM card into the new Xiaomi Redmi Note 9S

Let’s start with the first scenario. You have just purchased a Xiaomi Redmi Note 9S, new or used, but not equipped with a SIM card. The manipulation in this case is the simplest. Here are the steps to follow below:

  • As we told you a little above, make sure your Xiaomi Redmi Note 9S is in order. Find the location of the SIM card cache, usually in the top left or top right corner.
  • Using the SIM tool, open the drawer by pressing on the slot for the tool.
  • After opening, check the SIM format accepted by your Xiaomi Redmi Note 9S and insert a new card.
  • Close the drawer
  • Turn on your phone and enter your PIN.
  • You can now use the phone function of your Xiaomi Redmi Note 9S

How to replace the SIM card in my Xiaomi Redmi Note 9S

To complete this guide, there are very few differences with the manipulations we just discovered. However, if you want to know how to replace the SIM card in your Xiaomi Redmi Note 9S, after opening the SIM card slot, you will need to remove the old card and replace it with a new one. If you have borrowed a used phone or a friend’s phone, you may wish to format your Xiaomi Redmi Note 9S to reset it and enjoy it as if it were new, feel free to read our article on this topic.

If you are looking for the maximum of tutorials to become the king of Xiaomi Redmi Note 9S, we invite you to check out other tutorials in this category: Xiaomi Redmi Note 9S.

How to insert a SIM card into a Xiaomi phone

So, here you are the owner of a Xiaomi smartphone. Perhaps this is the Redmi 4x or Redmi 5a model, or maybe the more expensive Mi a1 or mi6. It is possible that you have chosen another option from the large line of this Chinese manufacturer. Congratulations anyway! Great choice! It remains only to turn on the device and insert the SIM card. Of course, for many, this procedure will be as easy as shelling pears. But there are those who find SIM installation a real challenge.

So we decided to tell you about it in detail. We promise by studying the information below, you can easily insert a SIM card into your Xiaomi.

Things to Remember?

For starters, keep in mind that many Xiaomi smartphones do not come with a removable back panel. Therefore, access to the slots for SIM and memory cards is located on the left side. Why not on the right? There are usually power and volume buttons.

In this case, the hole from which the slots are taken out is closed with a special cover. You can open it with a paper clip-key that comes with the device. By the way, under no circumstances throw this item away and keep it handy. After all, if you suddenly need to change the SIM card or get a microSD flash drive, it will be difficult without it.

For reference! On certain Xiaomi models, you can install a memory card instead of a second SIM card. For example, such devices include Xiaomi Redmi note 3 pro.

Insert a SIM card into a Xiaomi smartphone. detailed instructions

That’s all! Just remember to insert your SIM card correctly. To do this, you can use the instructions for your smartphone or special tips-schemes on the sliding slot.

For reference! Some Xiaomi smartphones have separate slots (Redmi 4 prime). For example, one is for placing SIM1, the other is for SIM2 or a flash drive. But there are also models with a hybrid slot that can hold 1 or 2 SIM at once, as well as a memory card (Redmi note 4, Redmi 4a, mi5, Redmi 5, 5 plus, etc.).

How to activate the SIM card in your Xiaomi Redmi 8A?

When you insert a SIM card, your Android will usually automatically recognize the insertion of a new SIM card. Sometimes you will be asked to enter your card PIN. If this card is new, then the PIN code is 0000, otherwise the code will be the one you specified earlier.

How to insert a SIM card into Xiaomi Redmi 8A?

Are you looking for how to insert a SIM card into your Xiaomi Redmi 8A. Indeed, you need to change your SIM card, or you have changed the operator, or you have lost your SIM card. In this article, we will explain to you how to open your Xiaomi Redmi 8A’s SIM card drawer, and secondly, in which direction to place the SIM card. Then we will learn how to activate your SIM card. Later, you will learn how to unlock the SIM card case. Finally, we will learn how to remove a SIM card from an Android phone.

How to put a SIM card on Xiaomi Redmi 8A?

After all, it will not always be easy to understand in what direction and in what place to put the SIM card. When you had to open this SIM and SD card slot of your Xiaomi Redmi 8A, you have to put the SIM card in the right place. Let’s see which SIM card matches your Xiaomi Redmi 8A.

How to insert a SIM card into Xiaomi Redmi 8A

You will need to open the SIM card slot as described in the previously described chapter. The SIM card chip should be in contact with the smartphone after closing the compartment. The easiest way is to follow the shape of the slot intended for your Nano-SIM or Micro-SIM.

What to do if my SIM card is not recognized in my Xiaomi Redmi 8A?

If your Xiaomi Redmi 8A still does not recognize your SIM card, please go to the settings menu of your Xiaomi Redmi 8A. After that select “Connections” or “SIM cards and mobile networks”, then “SIM card management”. Secondly, select the SIM card and press the switch to activate it. Sometimes you want to activate two SIM cards on your Xiaomi Redmi 8A, do not hesitate to refer to our article.

How to open the SIM card drawer of your Xiaomi Redmi 8A?

You will need a paper clip or small metal object to open the compartment that will hold the SIM card. On one side of your android, you can see a small box, next to which you should have a small hole. You will need to insert a paper clip into this hole and press down hard enough. A drawer for the SIM and SD card will open. Pull the drawer carefully out of the slot.

How to remove the SIM card lock?

To remove the SIM card lock, it couldn’t be easier:

  • Open the settings menu of your Xiaomi Redmi 8A
  • Move menu down
  • Select Biometrics & Security or Security or Security & Privacy.
  • Then on Other security settings
  • After that, select Set up SIM card lock or Encryption and the link.
  • Uncheck the SIM lock box

How to remove SIM card from Xiaomi Redmi 8A?

If you want to remove the SIM, you just need to do the opposite. Use the eject tool to open the drawer containing the SIM and SD cards. Place the compartment back in the same direction as you opened it. If you want to deactivate the SIM without removing it, you must go to the settings menu of your Xiaomi Redmi 8A. After that click on “Connections” or “SIM cards and mobile networks”, then “SIM card management”. Then select the SIM card you want to deactivate and deactivate it. If you are looking for other guides on your Xiaomi Redmi 8A, we invite you to read other articles in the category: Xiaomi Redmi 8A.

READ  iPhone 8 camera not working

How to put a SIM card in Xiaomi Redmi Note 8 and Redmi Note 8 Pro phones

The mobile phone has become a very important device in people’s daily life due to the large number of opportunities that it gives us with the advent of the Internet and social networks. Since then, its capabilities have increased to the point that today we use our mobile phone for almost everything. Reading information on the Internet, browsing social networks, sending or receiving mail messages or using navigators and travel guides are some of the most repetitive activities among users. Well, here, in fact, you know everything yourself 🙂

If there is an element of fundamental importance in mobile devices, then it is undoubtedly a SIM card, since it is important not only to make phone calls or send and receive text messages. This is also because the SIM card allows you to store contacts by creating a phone book or phone book.

For this reason, one of the first things we do when a mobile phone comes into our hands is to insert a SIM card into it. And this is what we must do right in order for the device to work properly.

For this reason, we wrote this article, and in it we will tell you how to correctly insert a SIM card into Xiaomi Redmi Note 8 and Redmi Note 8 Pro.

The specifications of these devices can be found here, and if you wish, you can also purchase Xiaomi phones and other useful gadgets. So, let’s begin:

If it’s fast. everything is simple, the SIM card is inserted similarly to Apple devices. into the slot on the side, which you need to get out. Dallee. in detail.

To do this, you will need to follow the steps that you will see below, they are quite simple:

In this case, it is very important to have on hand all the necessary components for inserting a SIM card:

The key used to open the terminal ports (or just a paperclip)

Nano SIM card. It is important to make sure that your SIM card is NANO in size, as this is what is really compatible with Xiaomi Redmi Note 8 and Redmi Note 8 Pro phones.

It is necessary to completely turn off the device so as not to damage the phone when replacing the SIM card. Although I do it like this, no shutdown 🙂

There is a hole on the left side of your phone, into which you need to insert a special key, after which the rear slot will open automatically. It is sometimes difficult to find, which is why people often search the net for how to insert a SIM card into Xiaomi Redmi Note 8. Knowing this subtlety immediately decides everything.

Then, when you open the slot, the SIM card tray is in your hands. just insert the SIM card correctly into it. There should be no difficulties here.

When you put the SIM card in, the tray needs to be inserted back into the slot, it is important to note that you must be sure that the NANO SIM card has been inserted correctly. That is, do not move or tilt the tray as this could result in loss of contact between the card and the device. Or she will just stand up crookedly (yes! It happened, you don’t need to have strength :))

Now all you have to do is turn on the phone, because with the correct installation of the card, you can make phone calls, as well as receive and send data. This is me about the Internet 🙂 In general, there is only one Finn here. this is that the SIM card is inserted from the side, like on the iPhone. And it’s enough just to know about it. The rest is pretty simple. Good luck!

How to insert a SIM card into Xiaomi or Redmi?

So you’ve finally bought your new smartphone from Xiaomi or Redmi, now it’s time to insert your SIM card into it. We will tell you how to do it correctly. Relevant for most of the company’s smartphones, including Redmi 8, Redmi Note 8, Redmi Note 8T, Redmi 7A, Redmi 9, Redmi Note 9, Redmi Note 9 Pro, Redmi 8a, Mi 10, etc.

We take a smartphone in our hands and find a tray on one of the side faces. This is how it looks in our example (Redmi Note 8T):

Next, we take a paper clip that is included in the kit.

And press lightly. If it didn’t work out, apply a little more strength.

If you did everything correctly, the tray will appear, and then you must remove it with your own hands. Remember how it fits in its seat.

As you can see, in our example, there are two separate slots for a SIM card. If you have two SIM cards, insert both (format. NanoSIM). If there is one, insert one. The first slot is the one that is closer to the memory card slot, although this does not play any special role. you can also use the second slot.

Now carefully take the SIM card tray and insert it into the seat. just like it was before.

If everything is done correctly, you will be prompted to enter the PIN code from the SIM card, if it is enabled on it, or you can immediately call your friends and relatives. just wait for the communication signal to appear in the status bar.

If the SIM card has a different size, the easiest way is to go to your operator’s salon and change the SIM card. the new kit usually supports all three popular SIM sizes, you don’t have to cut anything.

How to display a message for the SIM card of your Xiaomi Redmi 8?

Whenever you see a SIM card, everything you need. tse trombone or an instrument of vyshtovhuvannya, so it’s hoped for an hour to go to your Xiaomi Redmi 8. On one side of your android, you can poke a small box, ordering with which you have to blame but a small opening. You will need to insert the scrapbook into the whole opening and force it to hit hard. Display for SIM and SD display for. Protect the shuhlyad from the nest.

Yakiy way of acquiring SIM card blocking?

  • Go to the customize menu of your Xiaomi Redmi 8
  • Scroll down the menu
  • Nature Biometric data and security not bless Security non-breeze Security and confidentiality
  • Possibility to improve safety
  • And then select Set SIM card blocking no encryption and power
  • know the patron saint Blocking the SIM-card

Yak insert SIM card into Xiaomi Redmi 8?

You will be zamagayte z’yasuvati, how to insert a SIM-card in your Xiaomi Redmi 8. True, you will happen to change the SIM-card if you changed the operator, or you also lost the SIM-card. It is clear from the statistics that you can display the messages for the SIM-card of your Xiaomi Redmi 8, and in a different way, insert your SIM-card. In other words, find out how to activate your SIM card. You can change it later, like erase the blocking on the SIM-cards. Nareshty z’yasuyte, how to see the SIM card from the Android phone.

Yak rozmіstiti SIM-card in your Xiaomi Redmi 8

You will need to see a SIM card slot, as described in the front section. The microcircuit of the SIM-card is guilty of contact with the phone when the message is closed. The simplest method. shape the space, introduced for you Nano-SIM, some Micro-SIM.

Robiti, because my SIM card is still not recognized in my Xiaomi Redmi 8?

  • For a cob, turn it over, if you correctly inserted the SIM card
  • Then restart Xiaomi Redmi 8

As long as your Xiaomi Redmi 8 still does not recognize your SIM-card, you can see the adjustment menu of your Xiaomi Redmi 8 at any time. And then you can vibrate the connection of some SIM-card and mobile numbers. In a different way, vibrate the SIM-card, and then press on the pump, activate it.

Inodi ty bazhash, activate a mobile SIM card on your Xiaomi Redmi 8, do not get frustrated, read our article.

Yak insert SIM card on Xiaomi Redmi 8?

Surely, do not be light-eyed, in any direct way to size the SIM-card in any way. If you can see the SIM and SD slot of your Xiaomi Redmi 8, please insert the SIM card in the required place. Mi tse z’yasuєmo yaka SIM-card is shown to your Xiaomi Redmi 8.

Yak activate the SIM card for your Xiaomi Redmi 8?

If you insert a SIM card, your Android will automatically detect the inserted SIM card. If you enter the PIN-code from the menu. Yaksho tsya card is new, tody PIN-code. 0000. The code will be given, which you received earlier.

BYRGPUB.COM 2021