Options for resetting Xiaomi to factory settings
The smartphone may or may not be in working or non-working condition at the time you need to reset. You can pick up the method depending on the conditions. There are a total of 5 options:
- Using the built-in data reset function.
- Through the original bootloader.
- Through a third-party recovery menu.
- Using the Mi PC Suit software from the manufacturer.
- Using Google and Mi Cloud’s “Find a smartphone” feature.
Through the interface menu
Reset your Xiaomi Redmi or other smartphone to default settings can be through the interface of the device. To do this, go to settings and select the item “Restore and reset”. In this section you need to select the “Reset settings” function, after which the phone will ask to confirm this operation. Then the system will do everything automatically, depending on the model the smartphone may be rebooted several times during the recovery process.
Through the stock recovery
Hard Reset Xiaomi through recovery mode is suitable in a situation when the smartphone does not turn on or you can not unlock it after startup. To reset the device should be turned off, for additional data protection you can remove all SIM-cards and SD-drives, if installed. Next, perform the following actions:
- Hold down the power key, and as soon as the smartphone vibrates, hold down the volume up button for 10 seconds.
- When the Mi logo appears, you can release the Power button while continuing to hold down the volume rocker.
- The language selection screen will appear. Menu management in this mode is done by pressing the volume up and down keys. Confirm your choice with the “Power” button.
- After that Main Menu will appear, where you should choose “Wipe and Reset” (for some devices Wipe and Recovery).
- Now you need to activate the function “Wipe User Data” and confirm your choice by pressing “Yes.
- After that you only need to wait until phone completes reset and reboot.
This reset method is applicable to all devices from Xiaomi that run on Qualcomm processors, since these smartphones have an unlocked bootloader by default. In others, you will have to manually unlock (does not work on all devices) or select another method of resetting to factory settings.
Reset method using Team Win Recovery Project is not suitable for every smartphone, though it is one of the popular among fans of custom firmware for their devices. This is largely due to the fact that each user installs a different version of the recovery software. At the same time, most of these programs work using a similar algorithm. When resetting with TWRP, the procedure is as follows:
- First you need to power off the mobile device and start it in recovery mode by pressing the power and volume up keys.
- The default language in most of the recovery programs is English. But a language selection menu may appear where you need to select the language.
- In the menu that opens after this select “Wipe all user data”, then you need to confirm the operation.
- When the cleaning is done, you will also need to perform operations under “Wipe Cash” and “Wipe Dalvic”. One of these functions is absent in some models of smartphones, so you do not need to use it.
- When everything is done, you will only have to restart your mobile device by selecting “Reboot System Now”.
Via Mi PC Suite
The ways to perform a hardware reset described in the previous paragraphs are only suitable for Xiaomi smartphones with an unlocked bootloader. Without this unlock it’s impossible to get to the reset menu, instead of starting it the phone goes into firmware mode. In this case, you can perform a reset using the Mi PC Suite program, which is installed on your computer. In this case it is recommended to use the Chinese version of the software, as the English version does not recognize all models of smartphones. The sequence of steps to perform a reset is as follows:
- Run Mi PC Suite and connect the smartphone in firmware mode (press the power and volume up buttons to activate it).
- On top of the program on your computer, a dialog box will open, where you will need to select the second item, and then press the button on the left (in the English version is “YES”).
- After that the system will be reset to factory settings Xiaomi and erase all the information stored on the built-in storage device.
- When the clearing is done, you need to select the last item on the list to restart the smartphone. First boot after performing a hardware reset takes up to 5 minutes.
Remote reset via Google or Mi Cloud
A remote reset can be done using Google services or Mi Cloud, if the phone is tied to accounts in those systems. On Google, this is done using the “Find your device” function:
- Go to the Android Devicemanager website and log in with the Google account where you are logged into your Xiaomi smartphone.
- The system will search for tethered devices, and then you need to select the tab corresponding to your device.
- On this tab, you need to select “Erase Data” and confirm your selection twice by clicking first on this button and then on the “Clear” button.
- Clearing will start and “Your device has been erased” notification will appear. If the device is disconnected, a Vipe will be performed as soon as the smartphone is connected to the network.
Hard Reset using Mi Cloud service is possible only if the user has created an account in the cloud and tethered the smartphone to it. The procedure in this case is as follows:
- Visit the official website of Mi Cloud service and log in.
- Go to “Devices” and select the phone.
- Press “Format device” button.
- Reboot the device when the cleaning is finished.
The described ways to perform a hardware reset are only suitable if your smartphone has the “Find My Phone” feature activated.
How to reset Xiaomi to factory settings
Mobile gadgets from Xiaomi are distinguished by their operating system and quality build. But this does not free users from all kinds of problems. For example, an important system app can be deleted by mistake, or the fingerprint scanner stops working. Not everyone knows what methods and how to reset Xiomi to factory settings in such situations.
First you need to perform preparatory operations, otherwise you can lose absolutely all the data stored on the device.
Create a backup file via system settings or Mi PC Site. Transfer all photos, videos and documents to the PC. Check if you have access to the connected Mi and Google accounts. After the reset, during the first power up, the system will ask for their password. Remove the SD card, if you have one.
Before you can reset your Android device to factory settings, you need to go through a preparation procedure:
- Make a backup in your phone settings;
- Copy all photos, videos and necessary documents to your computer;
- Remove the internal drive, if you have one (a complete reset may cause the files to disappear);
- Make sure you have your Google and Mi account information. Have access to the account is very important, because if you forget the password, it will be impossible to use the device.
The methods described in the article are suitable for all Xiaomi Redmi and Mi models:
- Redmi 3S;
- Redmi Note 4;
- Redmi 4A;
- Redmi Note 4X;
- Redmi Note 5 Pro;
- Redmi 5 Plus;
- Redmi 6 Pro;
- Redmi 6A;
- Redmi 7;
- Redmi 7A;
- Redmi 8;
- Redmi 8A;
- Mi9 Lite and newer.
Through the “Menu of the device.
Xiaomi devices have a separate section in the settings menu, so that the user can delete all the information himself.
- To do this, go to the “Settings” tab of your device and select there the item called “Restore and reset”.
- Then find the item “Reset settings” and confirm the operation.
- In a few minutes all data, including photos, accounts, downloaded apps, music, videos, and other information will be completely erased. The phone will reboot and after the restart you will get a “clean” smartphone, as if you just bought it in the store.
The method under consideration is suitable for users who have physical access to their smartphone, and it works correctly, does not hang up, has no cracks on the touch screen, which would prevent pressing menu items.
Good to know! If you have a password or picture key set when you turn your phone on and wake it up, you’ll need it when you reset it as well. This is a special protection system that will not allow outside users to delete important data through a reset.
How to do a factory reset on Xiaomi? Hard Reset on MIUI
Sometimes there comes a time when you have to reset the settings to the factory settings on your favorite smartphone Xiaomi or Redmi, for example, if it began to slow down, malfunction, a virus appeared, etc.д. In general, the reason in this context is not so important. importantly, how to properly reset your settings, so we thought we’d guide you through.
Used on smartphones with Qualcomm processor. To perform a Hard Reset, you need to:
- Disconnect the device;
- Remove the SIM-card and memory card;
- Hold down the power key until the start of vibrating the device, then press the volume button for 10 seconds;
- In the window that appears, select the English language, after which the Mainmenu will appear, where the Wipe and Reset section is activated;
It remains only to wait until the procedure is completed and restart the device.
How to create a backup?
Attention! Reset will erase all the data on the phone Xiaomi Redmi 7A. If you have not backed up your contacts, images, videos, documents and everything else, you must do it, otherwise you will lose all the personal information that was on the device.
In order not to lose your data, follow these recommendations.
- Skim photos, documents and videos to your computer through a USB cable. You can also use Google Photos to back up pictures, and for documents and folders the cloud service Google Disk will do, but you can “pour” the number of files on it. To expand the storage you will have to pay.
- In order not to lose contacts and applications, activate the synchronization with the cloud in the. Go to “System”. “Advanced”. “Backup”. Turn on the backup save feature on your Google account.
Once you’re done with that, you can perform a Hard Reset of the Xiaomi Redmi 7A.
How to create a backup?
Warning! The reset will erase all the data on your Xiaomi Redmi Note 7 Pro phone. If you haven’t backed up your contacts, pictures, videos, documents and everything else, you must do so, otherwise you will lose all the personal information that was on the device.
To avoid losing your data, follow these recommendations.
- Download photos, documents, and videos to your computer via USB cable. You can also use Google Photos to back up pictures, and for documents and folders, the cloud service Google Drive will do, but you can “pour” the number of files on it. You will have to pay to expand the storage.
- To avoid losing contacts and apps, activate cloud sync in settings. Go to “System”. “Advanced”. “Backup. Turn on the backup save function to your Google account.
Once you’re done with that, you can perform a Hard Reset of your Xiaomi Redmi Note 7 Pro.
How to do a full data reset on the phone Xiaomi Redmi Note 7 from the settings menu?
Warning! Because of FRP (Factory Reset Protection, that is, reset protection) Android will ask you to enter the username and password of the account that was fixed before the Hard Reset procedure. So if you plan to sell your smartphone, you need to sign out of your Google account (“Settings”. “Accounts”. “Google”. “Delete account”) before the reset, so that the person who will receive your phone will be able to activate his profile on it.
Given the wide range of Android phones and the difficulty to describe the resetting process for a particular model, we’ll show the guide using three fundamentally different devices and firmware examples :
- Mi A1 on pure Android, which is also used in Nokia, Motorola, OnePlus (has a slightly redesigned system) and in all the devices released pro program Android One;
- Galaxy S7, which functions under the Samsung Experience. Recall that the Korean corporation is the largest manufacturer of smartphones in the world, so it makes sense to show this shell as well;
- Redmi Note 5 on MIUI. Products of this company are in great demand in the CIS, so we could not avoid it.
The easiest way to perform a Hard Reset is through a special menu in the system settings. Once again, note that the location and name of the items may vary slightly depending on the phone used. The main thing is to find the main category to restore and reset.
Xiaomi Mi A1 (pure Android 8.1 Oreo)
- Click on the “Settings” icon in the application menu or launch them using the icon in the notification bar.
- Scroll down and go to the “System” section.
- Press “Reset”.
- Choose “Delete all data” (“Factory reset”).
- Confirm your intention by pressing the key below.
- Enter the PIN code of the handset and press “Continue.
- Select “Erase All”.
Hard Reset Xiaomi | Сброс настроек Xiaomi redmi 7
Your device will reboot and you will need to go through the initial setup again as if it were a new phone.
Samsung Galaxy S7 (Samsung Experience shell)
- Go to the settings in the way that works for you.
- At the bottom, click on the “General Settings” tab.
- Select “Reset” (“Archive and reset”).
- Tap on “Reset Data”.
- Click on the blue reset button.
- Enter the PIN code of the device and press “Next”.
- Select “Delete All” (“Reset Device”).
Your phone will restart. Remains to set it up as you did after purchase.
Redmi Note 5 (MIUI firmware)
- Open “Settings”.
- Go to the “Advanced Settings” window.
- Tap “Backup & Reset”.
- Select “Reset Settings”.
- To delete absolutely all applications and files, check the “Clear internal memory” option.
- Just click on “Reset Settings” and enter your password if needed.
Attention! As you see, the main thing is to find the “Reset” section. To make sure you don’t have to “wander” through all the options in search of the right menu, it’s easier to type “Reset” in the search box on the main page. Choose the menu you are looking for from the list and you will get right into it. And the rest is like in the instructions.