Table of Contents

How to connect AirDots Pro 2 headphones to a smartphone?

It should be noted that the headphones have different names Mi AirDots Pro 2, Mi Air 2 and Mi True Wireless Earphones 2, but they are the same type of headphones with names for different markets.

Connection For initial synchronization, it is necessary that the headphones and case are fully charged, so that there is no failure when the Xiaomi Air 2 is connected for the first time.

  • Put both earbuds in the case and close it.
  • Hold the side button for a few seconds until the indicator on the case lights up. This function must be done once to activate the headphones as they are shipped from the factory in a switched off state.
  • Now again hold down the side button for a few seconds until the indicator on the case starts blinking.
  • Headphones ready to pair.

We run over to the phone: in the Bluetooth menu, search for available devices.

In the list of available devices, we find Mi True Wireless Earphones 2. Click on this title and accept the pairing request, in which you can allow the exchange of contacts. Regardless of the version of the headphones for the global market and the Chinese market, the title in the list of available devices will look specifically like Mi True Wireless Earphones 2.

After a successful connection, information about the status of the device and its charge level will appear in the menu of paired devices. The headphones are plugged in and ready to go. For the upcoming use, the Xiaomi Air 2 headphones have an automatic pairing function, so the next time they will connect to your phone (if the Bluetooth function is enabled on it), as you open the case with the headphones. Taking the headphones out of the case is not necessary now. The auto-connect function is only supported from the MIUI 11 shell version.

You can check the headphone charge in the Smart background Bluetooth menu when pairing devices. The function shows full information about Mi Air 2: the charge of the case and the charge of each earphone separately in percentage.

By deflot, the following functions are assigned to the touch control buttons:

With an incoming call, double tap on any earphone. answer the call.

Double tap the left earphone. call the voice assistant.

Double tap on the right earphone while listening to a track. pause / play.

Management and configuration by installing an additional application.

For the headphone option, a special Mi AI application is used. There is a special QR-code on the box, scanning which will immediately start downloading the “.APK” file of this application if you have an Android phone. If you examine the code on the iPhone, it will go to the download of the file from the App Store. There is also an insert inside the box with a short description of the application and a QR link to its download (in Chinese).

After installing the application, a shortcut appears on the desktop, we go into the application, and since it is in Chinese and nothing is clear, see the next steps below on the screenshots.

The application will ask for a number of permissions, we agree with everyone:

After the application opens, go to your personal account, and then in the options:

In the settings, we find the item Bluetooth device. Since the application is suitable for the option of various devices, we select Air 2 headphones from the list of devices:

After the headphones have been selected, the headphones are searched for, click “Connect”, at this moment the headphones should be inserted into the case with the lid open. After synchronization, a window will appear with the display of the charge level and the case, we run in this menu in the “Settings”:

A menu will open with information about the device, in which the upcoming configuration will take place. We go to the “Function settings”:

And then we select the action from the proposed options, which needs to be assigned to double touch on the right or left earphone:

Enjoy music wirelessly with Midusa!

Manual Xiaomi Mi True Wireless Earbuds Basic

From the document you will learn: an overview of the device, wearing, charging, turning on and off, the introduction of 1 and 2 headphones, reset options, an overview of functions, safety measures and warnings.

Xiaomi Mi true wireless earbuds basic connection

To connect headphones, you need a phone with a Bluetooth interface. The headset is cut in when you remove it from the case and turns off when you return it automatically. When the device is turned on, the left earphone connects to its own partner also automatically. The indicator of the latter begins to flicker in a snow-white tone.

Let’s get to the phone. Activate Bluetooth to find available devices. Mi True Wireless EBs Basic_R is the accessory we need (right earphone). Click it and accept the headphone pairing request, where you give permission to exchange contacts.

Once the connection is confirmed, the menu will display information about the status of the headset and the state of charge of its battery. Connection completed successfully. You can start your beloved melody and listen to it.

At the end of all actions, the headphones will automatically be connected to the previously connected device, if Bluetooth is activated.

If the operation is unsuccessful, remove the headset from the charging case and make sure it is turned off. Now press the buttons on the headphones and hold them for 15 seconds. The indicator light should blink three times alternately reddish and white and blink again. Release the buttons, put the headphones in the case. Remove the headset from the list of paired devices on the phone, if any, and repeat all the steps again. Now you understand how to connect Mi true wireless earbuds.

There is also the option of connecting a mono Bluetooth headset. The sequence of pairing steps is similar to the previous one. To connect the earphone, just pull it out of the docking station, and it will automatically turn on. Its indicator at first begins to flicker rapidly, and later to blink more slowly in a snow-white tone. Search for an available accessory and select one, which will be called Mi True Wireless EBs Basic_R or Mi True Wireless EBs Basic_L and, by clicking on it, confirm the pairing request.

  • Annotation on working with Xiaomi Mi true wireless earbuds basic 11/10/2019 The article describes a detailed annotation on how to pair the headphones correctly and what to do if one of them does not work.
  • Review of Xiaomi Mi True Wireless earbuds basic 10/22/2019 Read more about the new product from Xiaomi. Mi wireless earbuds true wireless earbuds. From the article you will learn about the battery, sound and
  • Annotation in Russian for air dots Xiaomi 07/01/2019 about AirDots headphones, specifically about how to charge the device, how to connect to the phone and how to turn on only one
  • How to charge Xiaomi Redmi AirDots earbuds? 02/07/2020 In our useful article, we thoroughly told about how to properly charge Xiaomi Redmi AirDots headphones, features and what life hacks
  • How to connect Xiaomi AirDots headphones to the phone? 01/17/2020 In this article, we will analyze two methods of how to connect AirDots wireless headphones to your phone. We will also touch on the options for solving the main

How to set up, use and tips:

How to charge. Page Use the cable to charge the charging case. Indication: small charge. the indicator blinks red every 3 seconds; charged. the indicator of the charging case glows pure white.

How to turn on. Page 2 methods: 1. Automatically cut in when you take it out of the charging case; 2.Press and hold the touch pad for 1 second until the indicator lights up in pure white.

How to connect. Page You can synchronize either 1 earpiece or 2:

  • Introduction of 2 headphones: Immediately remove both headphones from the case and they will automatically connect to the phone, if it does not come out the first time, repeat the action a couple of times. Didn’t it help? Manual connection: Turn off Bluetooth on the phone, and manually turn on both headphones, the indicators will flash briefly in white, and on the right earphone, the indicator will slowly flash in white after pairing between the headphones. And now turn on Bluetooth on your phone.
  • Use 1 earphone: To do this, take out only one earphone from the case, preferably the right one (the left one is connected for a long time). On the phone, select ” Earbuds _R” or ” Earbuds _L”, and synchronize. If done manually, the principle is the same as with 2 headphones.

How to turn off. The page You can disconnect by 2 methods: 1. put them in the charging case; 2.press and hold the touch pad for 5 seconds, wait for the reddish indicator.

How to embed. Page To make it comfortable to wear and not to fall out, follow the tips on page 2. Gently plug in the wireless earpiece and make sure that it does not fall out, shake your head to be sure, and align so that the microphone is open and turned towards your mouth (while talking on the phone).

Delivery

Those who cannot live without sports and activities, who like to spend a lot of time on the move, will certainly appreciate the Xiaomi Mi Sports Bluetooth Headset wireless headphones, which were made specifically for sports. Lightweight and comfortable, soft and comfortable to fit in the ear, they will be able to amuse you with music for 7 hours. Xiaomi Mi Sports Bluetooth Headset earbuds do not rub, fix firmly and do not hurt even after hours of sports.

Xiaomi Mi true wireless earbuds [How to connect? ]

The device comes in a convenient plastic charging case. The headset is designed in such a way that the ear pads can be used independently of each other. The headphones are placed securely, without causing discomfort to the listener, as they have a design that is consistent with the structure of the human auricle. For a more secure fit, there is an additional two pairs of ear cushions in the kit. If you want to know more about Mi true wireless earbuds, how to connect them, then read our article. Before using the device, remove the film protecting the contact surfaces and place them in the charging case. While the battery of the gadget is charging, the indicator light will glow red, which, when fully charged, changes to a white tone that disappears after a minute. Connecting Xiaomi Mi true wireless earbuds basic The headset turns on when you remove it from the case and turns off automatically when you return it back. When the gadget is turned on, the left earphone also automatically connects to its partner. The indicator of the latter starts blinking in white. Let’s start with the smartphone. Activate Bluetooth to discover available gadgets. Mi True Wireless EBs Basic_R is the device we need (right earphone). Click it and accept the headphone pairing request, where you give permission to exchange contacts. As soon as the connection is confirmed, in

the menu will display information about the status of the headset and the state of charge of its battery. Connection

ended successfully. You can play your favorite melody and listen to it. Upon completion of all actions, the headphones

will be automatically connected to a previously connected gadget if it has

Bluetooth is also activated. If the operation is unsuccessful, remove the headset from the charging case and make sure it is turned off. Now press the buttons on the headphones and hold them for 15 seconds. The indicator light should blink three times alternately in red and white and blink again. Release the buttons, put the headphones in the case. Remove the headset from the list of paired gadgets on your phone, if any, and repeat the steps again. Now you know how to connect Mi true wireless earbuds. There is also the option of connecting a mono Bluetooth headset. The sequence of pairing steps is similar to the previous one. To connect the earbud, simply remove it from the docking station and it will automatically turn on. Its indicator first starts blinking quickly, and then blinking white more slowly. Search for an available device and select one, which will be called Mi True Wireless EBs Basic_R or Mi True Wireless EBs Basic_L and by clicking it confirm the pairing request.

READ  How to connect an iPhone instead of a WEB camera

Xiaomi Mi True Wireless Earbuds Basic S / Hi-Fi & Digital Sound / iXBT Live

Xiaomi Mi Headphones True Wireless Earbuds Basic SHOP Xiaomi Mi true wireless earbuds basic sXiaomi launched these wireless earbuds in 2020 and became an instant hit. The packaging of the headphones looks like this: FrontBackSpecificationsBrandXiaomiManufacturer’s PartZBW4502GLModelTrue Wireless Earbuds Basic SConnectionwirelessConnection interfaceBluetoothBluetooth version5. 0Designin-earFrequency range, in Hz 20-20000Sensitivity, in dB90MicrophoneYesColor of housingBlackMaximum operating time, in hours4 hours (without charging) Housing materialplasticRange of action

10 meters The set includes: the headphones themselves, ear cushions 3 pcs. (small, medium, large), instruction (with translation into Russian) and case, but micro USB wires are not. These headphones are ideal for those who spend a lot of time outside the house and go for runs and walks. Note: The photo shows small ear pads. The case is small, so it can easily fit into your Unfortunately, scratches can easily appear on the case, in principle, this is a common problem among cases from wireless headphones. The lid of the case is held with a magnet. The headphones are also magnetically held. The magnets are powerful so the earbuds hold on tight. Even if the open case is turned over, the headphones will not fall out. There is an indicator on the front of the earbuds indicating the charging level. The case is made of durable matte plastic. On the other side is a micro USB port for charging. Sorry for such a Focus camera. For some reason, the phone did not want to focus on the case. Earbuds Basic S work in active mode for about 4 hours, taking into account the recharging in the case, this time increases several times. Charges in about 1.30 (one and a half) hours. The charge level can be monitored on the smartphone. The battery capacity of each earbud is 43 mAh, and in the case is 300 mAh. According to the manufacturers, these headphones can be used: 15 hours of movies, 12 hours of music, 15 hours of games and 12 hours of calls. The sound quality is at a good level and due to Bluetooth 5. 0 the accuracy is also excellent. The vocal sounds in the headphones sound powerful, the main thing is realistic. As Xiaomi claims, the earbuds are splash-proof and can be run in light rain. To be honest, I have not checked and will not. To my surprise, the microphone works well, it is quite pleasant to communicate with the interlocutor, but loud extraneous sounds will also be transmitted. For such a price, the sound is perfect. There is such a feature as “noise reduction” in the microphone. This function drowns out the surrounding noise, so you can be heard clearly during a call. Each earphone weighs approximately 4 grams, because of this I think they do not cause discomfort to me. Do not fall out during sudden movements. The headphones cannot be pulled out with one finger, therefore, only with two fingers. Marks in the headphones “R” and “L” are present. Distinguishing in the dark will not be easy. It’s easier to navigate by the location of the headphones in the case, that is, the earpiece on the left is for the left ear, and the right earpiece is for the right ear. To connect with headphones, you need to select your model in the Bluetooth menu. By the way, the smartphone finds each earpiece separately. To use stereo mode, you have to first connect to the right earbud, and the left one will do it automatically. If you remove the left earpiece, the right earpiece will continue to sound. And if it is the other way around, then the sound will disappear. The headset always connects automatically when you take the headphones out of the case. Connect happens in just a couple of seconds. The buttons are mechanical, not touch-sensitive, and therefore, when pressed for the first time, it will not be habitual, since you will press the earpiece into your ear. In order to receive a call / hang up the phone / pause / Play, press once. To reset the call, you need to hold down the button for one second. Double click. call the voice assistant. You cannot switch tracks using the buttons. Cons The charge level of the case is not shown.

That’s it, I can’t single out anything else from the minuses. Conclusion Yes, what can I say? I like the headphones, they sound great. The volume of the battery is always pleasing. It seems to me that in this price segment these headphones have no equal. BUY Xiaomi Mi true wireless earbuds basic s

Manual for Mi true wireless earbuds [How to pair? ]

This new brand of wireless headset from Xaomi entered the electronics market this spring (2019). The presence of Bluetooth makes it possible to synchronize the device with a mobile phone. To connect the device, you need to take some steps. For this, this manual is written Xiaomi Mi true wireless earbuds basic. The headphones are sold covered with a special film. Before using them, the protective coating must be removed. Then the gadget should be placed in the docking station to charge its battery. While the battery is filling with electricity, the indicator is red. When it changes to white, the device is ready to go. Now you can take the headphones out of the case. After a couple of seconds, they are activated. The left device automatically connects to the right one, which is confirmed by a white glow. The next step is to activate the Bluetooth app on the mobile phone and find the available gadgets. From the highlighted list of them, find Mi True Wireless EBs Basic_R and click the icon, thereby confirming the pairing operation. As a result, the contacts of the connected devices are exchanged. Further, the menu will display data on the status of the headset and the state of charge of its battery. The headset is now fully operational. In the future, the gadget will connect automatically, provided that Bluetooth is enabled on the smartphone. How to connect Earbuds to the phone One Mi true wireless earbuds does not work? It so happens that one earbud is functioning and the other is not. This is

occurs due to the fact that the pairing is lost for some reason. How

as a rule, the right device is connected to the smartphone, and the other functions directly

through him. When the connection is lost, only one plays. If you are wondering how to pair Mi headphones true wireless earbuds, then you need to disconnect the headphones from the phone and suspend the Bluetooth operation. Instructions for Mi true wireless earbuds to pair with each other: place the headset in the case; remove and then press the buttons on the headphones and hold them for at least 15 seconds. ; when the indication appears, the synchronization is reset, and a new pairing occurs between the devices. The indication on one right device speaks of a successfully passed

synchronization and you can now connect to your smartphone. If Mi headphones are true anyway wireless earbuds do not work at the same time, then the above steps should be repeated more than once, until synchronization is completed. But when everything ends well, the device will work fine.

How to connect one and both earbuds

If one of the headphones stops working, you need to execute the following commands:. Deactivate both headphones by holding the buttons for a long time until a red indication appears Hold the control keys for 30-50 seconds until a white indicator appears. After 10-20 seconds, the headset will blink twice in red and white Then you need to continue to hold the sensors so that they go out for a couple of seconds After resetting the settings, you must put the device in the charging case Subsequent opening of the case will lead to quick synchronization of the two headphones.

Redmi AirDots manual. setup, control, charging

The Xiaomi Redmi AirDots wireless headset was presented along with the Redmi Note 7 Pro and Redmi 7 smartphones. The model has similarities with the previously announced Mi AirDots, while it has some differences. To understand the intricacies of setting up the accessory, the instruction of the Redmi AirDots headphones will help.

How to tell if they are charged

A white indicator is used as confirmation of successful charging of the headphones. The appearance of a red signal indicates a discharge of the device.

How to turn headphones on and off

Before connecting a gadget to external devices, you should figure out how they are turned on and off. Redmi AirDots instructions for activating the headphones:. Before using for the first time, you need to charge the case and headset Take the headphones out of the case, hold your finger on the touchpad for a few seconds. When the white indication appears, they will start up and are ready to use To disconnect the headset, hold your finger on the touchpad for a couple of seconds The second way to turn off is to put the headphones in the case, after which they are automatically deactivated.

The difference between Redmi AirDots and AirDots

The first feature is the changed appearance and color of the device. Mi AirDots are produced in a classic style for the Chinese brand and have a white body color. And the new Redmi AirDots received a black version, which makes it more elegant.

The differences also affected the dimensions of the device. The Redmi product is slightly smaller than the Mi AirDots. This increases the wearing comfort of the accessory, eliminating unpleasant sensations during prolonged use. However, the charging case has become larger.

Both models are compatible with Bluetooth 5.0 and earlier. Support for the 5th generation increases the range, reduces power consumption, and also allows you to transfer large amounts of data without losing communication stability.

In terms of autonomy, the models do not differ. Each earbud houses a small 40mAh battery that provides about 4 hours of listening time. Using the charging case, you can charge the gadget up to 3-4 times. The total operating time reaches 12 hours.

Operating and charging time

Charging the case takes about 45 minutes. The headset charges a little faster, and a full charge lasts about 4 hours. A charged case is able to restore the battery level of two earbuds 3-4 times.

With the active use of two headphones, their autonomy reaches 4 hours. With alternating use, the operating time increases by 1 hour.

How to connect headphones to a computer and disconnect them

To connect AirDots to a computer or laptop, you need to make sure that the devices support Bluetooth communication. Open the device search item in the Control Panel and wait for pairing. The setup process takes a couple of seconds, after which the user can freely listen to music or watch movies.

To disconnect pairing, you need to open the settings of your smartphone or computer, open the Bluetooth section, and find the desired device in the list of connected ones, click on the menu item “unlink or remove the device”.

How to charge Redmi AirDots

To charge Redmi AirDots, you need to use the charging case. The case itself is charged from external power sources, to which it is connected using a microUSB cable.

Operating instructions for Xiaomi Mi true wireless earbuds basic

This new brand of wireless headset from Xaomi entered the electronics market this spring (2019). The presence of Bluetooth makes it possible to synchronize the device with a mobile phone. To connect the device, you need to take some steps. For this, this instruction is written Xiaomi Mi true wireless earbuds basic.

The headphones are sold covered with a special film. Before using them, the protective coating must be removed. Then the gadget should be placed in the docking station to charge its battery. While the battery is filling with electricity, the indicator is red. When it changes to white, the device is ready to go. Now you can take the headphones out of the case. After a couple of seconds, they are activated. The left device automatically connects to the right one, which is confirmed by a white glow.

The next step is to activate the Bluetooth app on the mobile phone and find the available gadgets. From the highlighted list of them, find Mi True Wireless EBs Basic_R and click the icon, thereby confirming the pairing operation. As a result, the contacts of the connected devices are exchanged. Further, the menu will display data on the status of the headset and the state of charge of its battery. The headset is now fully operational. In the future, the gadget will connect automatically, provided that Bluetooth is enabled on the smartphone.

One Mi true wireless earbuds not working?

It so happens that one earbud is functioning and the other is not. This is due to the fact that the pairing is lost for some reason. As a rule, the right device is connected to the smartphone, and the other operates directly through it. When the connection is lost, only one plays.

READ  How to connect Smart view to Samsung TV

If you are wondering how to pair Mi true wireless earbuds headphones, then you need to disconnect the headphones from the phone and suspend the Bluetooth operation.

Instructions for Mi true wireless earbuds to pair with each other:

  • place the headset in the case;
  • remove and then press the buttons on the headphones and hold them for at least 15 seconds;
  • when the indication appears, synchronization is reset, and a new pairing occurs between the devices.

The indication on one right device indicates a successful synchronization and you can now connect to your smartphone.

If, all the same, Mi true wireless earbuds do not work at the same time, then the above steps should be repeated more than once, until synchronization is completed. But when everything ends well, the device will work fine.

How to connect Mi true wireless earbuds?

The device comes in a convenient plastic charging case. The headset is designed in such a way that the ear pads can be used independently of each other. The headphones are placed securely, without causing discomfort to the listener, as they have a design that is consistent with the structure of the human auricle. For a more secure fit, there is an additional two pairs of ear cushions in the kit. If you want to know more about Mi true wireless earbuds, how to connect them, then read our article.

Before using the device, remove the film protecting the contact surfaces and place them in the charging case. While the battery of the gadget is charging, the indicator light will glow red, which, when fully charged, changes to a white tone that disappears after a minute.

Xiaomi Mi true wireless earbuds basic connection

To connect headphones, you need a smartphone with a Bluetooth interface. The headset turns on when you remove it from the case and turns off automatically when you return it back. When the gadget is turned on, the left earphone also automatically connects to its partner. The indicator of the latter starts blinking in white.

Let’s start with the smartphone. Activate Bluetooth to discover available gadgets. Mi True Wireless EBs Basic_R is the device we need (right earphone). Click it and accept the headphone pairing request, where you give permission to exchange contacts.

As soon as the connection is confirmed, the menu will display information about the status of the headset and the state of charge of its battery. The connection ended successfully. You can play your favorite melody and listen to it.

Upon completion of all actions, the headphones will automatically be connected to the previously connected gadget, if Bluetooth is activated.

If the operation is unsuccessful, remove the headset from the charging case and make sure it is turned off. Now press the buttons on the headphones and hold them for 15 seconds. The indicator light should blink three times alternately in red and white and blink again. Release the buttons, put the headphones in the case. Remove the headset from the list of paired gadgets on your phone, if any, and repeat the steps again. Now you know how to connect Mi true wireless earbuds.

There is also the option of connecting a mono Bluetooth headset. The sequence of pairing steps is similar to the previous one. To connect the earbud, simply remove it from the docking station and it will automatically turn on. Its indicator first starts blinking quickly, and then blinking white more slowly. Search for an available device and select one, which will be called Mi True Wireless EBs Basic_R or Mi True Wireless EBs Basic_L and by clicking on it, confirm the pairing request.

How to connect Mi True Wireless Earphones

The new development is delivered in a miniature box from the company: the device itself is drawn in front, the key differences of the novelty are depicted on the sides, and specifications and device parameters are written on the back, as required by production standards. The entire description is written entirely in Chinese. How to connect Mi True Wireless Earphones read the article below.

On the sides of the headphones there are holes that suppress noise from the outside, on top, at first imperceptible, due to the plastic layer, a white indicator diode. Below you can see several contacts, they are needed to charge the headphones and connect the main microphone.

Instructions for connecting Mi True Wireless Earphones

If you are interested in the question “How to connect Mi True Wireless Earphones?”, Then everything is easy. To connect, you need to open the case, then hold down the button on it, literally for 2-5 seconds, after which the headphones will appear in the list of available devices for your smartphone. Then everything is simple: press the line of headphones you need, and they connect very quickly.

In the future, the connection will be even faster, it will be enough just to get one of the headphones out of the case.

Headphone control is very simple:

  • if you hold on to their touch zone for 3 seconds, then the sound suppression system will turn on,
  • if you touch the headphones in this way again, the system turns off.

If you touch the earphone from the right ear 2 times, then the music will either turn on or stop, however, when a call arrives on your device, the same double tap will allow you to talk to the caller, when the conversation ends, then you must also double-tap the right earphone.

  • If listening to music was interrupted by a call, then after it ends, the song will start playing from the same place.
  • When you double-tap the earpiece on the left, you will call the voice assistant, each operating system has its own.
  • If you wear only one of the headphones, then it will always be responsible for music and conversations with people.

The downside is that the headphones cannot be controlled by voice and there is no way to switch songs. Although the manufacturers can be understood, because they were limited to control options. only 2. However, you can switch songs using the same Mi True Wireless Earphones, for this there are several programs on Android.

However, do not worry so much: at the same presentation where the Mi True Wireless Earphones were shown, another novelty was presented. Mi Smart Band 4, but they already had the ability to control music with voice and switch songs using headphones. This is a great commercial move.

How to connect Xiaomi Mi Watch to iPhone

Quite a daunting task, to be honest. To do this, you will have to spend a lot of nerves and ingenuity, but the end result is worth it to suffer from this rather abstruse task of connecting an iPhone to a Xiaomi Mi Watch.

Important! Before you can start connecting your Xiaomi Mi Watch to your iPhone, you need to download the WearOS app from Google (you can download it from the App Store at this link). Only after that you can proceed to setting the clock itself.

To connect Xiaomi Mi Watch to iPhone you need:

Pick up the watch and hold down the on-wheel.

Next, a window with a bunch of hieroglyphs will “pop up”. Just press the blue buttons to move on. Basically. this is a user agreement on privacy, but if you do not click “Confirm” you will not be redirected to the next item.

Next, a QR code should appear on the watch screen. You do not need to scan it because it is of little use.

On the iPhone, open the “WearOS” application that you downloaded earlier.

Swipe to the right and select on the “Connect new watch” tab.

iPhone starts searching for Smart Watch. It took us a few seconds, but if your Xiaomi Mi Watch does not detect it, try disabling Bluetooth, and then turning it on again and try again.

The name of your Mi Watch should appear on the screen

We poke at him, if found. If not, repeat the search.

We confirm the request to create a pair with Mi Watch.

Once again we confirm our action when the code appears on the screen of the iPhone and Mi Watch.

Now you should be asked for a password to connect to Wi-Fi. We enter it, connect.

If everything is done correctly, the white hieroglyphs “Loading” should be lit on the watch screen, and the iPhone should display the title “Almost done” and load the watch.

It took us no more than two minutes to load the Smart-watch, then the “Everything is ready” window was displayed, and a gesture with a hand appeared on the watch, which, in theory, should give you a short instruction on how to use the watch.

You don’t have to “tap” the clock, nothing much will happen. Just click on the wheel to return to the home screen.

In fact, this is everything. Now the watch loads the dials, works, connects to the iPhone and can be used. But, if you want to enable English on the Xiaomi Mi Watch, you need a little more time and a few steps.

How to connect Xiaomi Mi Watch to iPhone

We are talking about how to quickly and easily connect the Xiaomi Mi Watch Smartwatch to the iPhone and partially translate the Chinese language of their interface into English.

If you are thinking about buying a new Xiaomi Mi Watch Smartwatch or have already become the owner of these Chinese beauties, which everyone was talking about “Apple Watch killers”, you will certainly be interested in how to connect a smart watch to your smartphone.

The whole truth about connecting Xiaomi Mi Watch

Watch, charging, beautiful packaging, pieces of paper. that’s what awaits you after unpacking. Well, it seems. a standard set for a complete set of Smart-watches, but there it was. Because Xiaomi not only forgot to put the English instructions in the kit, but also did not indicate that you need to connect the watch to the iPhone and Android not through the “infused” application, but through the “WearOS” program from Google.

We were not able to connect the Xiaomi Mi Watch Smartwatch to the native Android Xiaomi device at all, so if you can do this, let me know.

If you start connecting the Xiaomi Mi Watch Smartwatch via the application scanned by the QR code, then you will be left with hieroglyphs, which are simply impossible to remove. Therefore, it is better to follow the instructions to save yourself time and nerves.

How to enable English on Xiaomi Mi Watch

That’s right. the standard Xiaomi Mi Watch comes from the factory in Chinese, which is almost impossible to change. But, what if you bypass the system a little?

To enable English on Xiaomi Mi Watch, you need to do the following:

Open the Settings app on your iPhone

Then scroll down and open the “Basic” tab

Next, you need to change the “iPhone Language” to English. To do this, you just need to select “iPhone Language” and select “English” from the menu.

We return to our application “WearOS”

The watch should disconnect from the iPhone. this is the norm, they just need time to understand what is happening to them and why a device that was just Russian / Ukrainian suddenly became English.

After a few seconds you will see the inscription “Connected” on top. the watch is connected.

Now all controls in the “WearOS” application are in English.

The clock should switch to English too.

Important! Your Xiaomi Mi Watch will not be fully English even after this switch. No matter how much we tried to achieve a “pure” effect, we did not succeed, because, then there. then hieroglyphs “skipped” in the clock. But now Xiaomi Mi Watch can be used, and when the dials are loaded, you can modify the themes, customize for yourself.

Basically, this is all that you can do with your Xiaomi Mi Watch before the global version is released. Also, do not forget that you can always contact the specialized iLab service center for help.

How to connect Redmi AirDots wireless headphones to a smartphone

Wireless headphones are becoming an essential part of everyday life. The absence of wires provides maximum ease of movement. Xiaomi has already released several models of wireless headphones. And now we will tell you how to connect the Redmi AirDots model, which is also known as Mi True Wireless Earbuds Basic, to a smartphone.

Before using the device, you must remove the protective film from the contact surfaces of the headphones, place them in the case and charge them. The indicator glows red while charging. When fully charged, its color turns white, and after 1 minute it goes out.

To connect, you need a smartphone with Bluetooth support and Redmi AirDots. The headphones are turned on and off automatically when they are removed or inserted into the case.

To connect, remove both earbuds from the charging case at the same time and wait 2 seconds until they turn on. After switching on, the left earbud automatically connects to the right one, the indicator of which starts flashing white.

Moving on to the smartphone. Turn on Bluetooth and search for available devices.

The device we need is called Mi True Wireless EBs Basic_R. This is the right earpiece. Click on this name and accept the pairing request, in which you can allow the exchange of contacts.

After a successful connection, information about the status of the device and its charge level will appear in the menu of paired devices. Headphones are connected, turn on the music and enjoy.

READ  Transfer data from Xiaomi to honor

After the first successful pairing, Redmi AirDots will automatically connect to the previously paired device if it has Bluetooth enabled.

If for some reason you are unable to pair with the headphones, remove the headphones from the charging case and make sure they are turned off. Press and hold the buttons on both earbuds for 15 seconds. After the indicator flashes red and white alternately three times (then flashes again), release the buttons and return the earbuds to the charging case. Remove Redmi AirDots from the list of paired devices on your smartphone, if present. Then pair again.

It is also possible to use the headphones alone as a Bluetooth headset. The pairing algorithm is exactly the same. To connect only one earphone, you need to take it out of the charging case and wait for it to turn on automatically. The headphone indicator will start flashing white quickly and then slowly. Searching for available devices. Depending on the headphone you choose, the device will be called Mi True Wireless EBs Basic_L or Mi True Wireless EBs Basic_R. It remains to click on the device name and accept the pairing request.

Enjoy music wirelessly with Xistore!

Author: Andrey Kalina

How to connect Redmi AirDots headphones to your phone

Wireless headphones are gaining popularity at lightning speed. Many companies are engaged in the production of Bluetooth headsets, including Xiaomi. And the recently spun off from the company, the Redmi brand, has unveiled its first Redmi AirDots wireless headphones. They are also called Mi True Wireless Earbuds Basic. And today I will tell you how to connect them to your smartphone.

Be sure to charge the headphones before using them. The red color of the indicator will inform you about the charging of the gadget, white. about the full charge (after 1 minute it will go out).

After that, you can start connecting Redmi AirDots to your smartphone. The connection is made via Bluetooth. It is worth noting that the headphones turn on and off automatically, this happens during extraction or installation in the charging case.

How to Connect & Pair Earbuds of Xiaomi Redmi Airdots ? [sandhikshandas]

By the way, you can connect either one or two headphones. To connect two headphones, you must simultaneously remove them from the case.

Turning on occurs within 2 seconds, the left earphone independently connects to the right one. the burning white diode on the lead earpiece will also tell you about it.

xiaomi, earbuds, connect

The next step is to turn on Bluetooth on your smartphone and search for available gadgets.

In the list of devices, you will see a headset called Mi True Wireless EBs Basic_R. You should click on it and allow access to contacts.

Now in the same Bluetooth section in the Paired devices sub-item, you can see the connection status, as well as the remaining battery charge. All that remains is to turn on your favorite audio track!

In the future, Redmi AirDots will connect to your smartphone by themselves, but do not forget about turning on Bluetooth.

You can also watch this instruction in video format:

How to set up, use and tips:

How to charge. Page Use the cable to charge the charging case. Indication: low charge. the indicator flashes in red every 3 seconds; charged. the indicator of the charging case is white.

How to turn on. Page 2 ways: 1. automatically turn on when you take it out of the charging case; 2.Press and hold the touch pad for 1 second until the indicator turns white.

How to connect. The page You can sync both 1 earphone and 2:

  • Using 2 headphones: Remove both headphones from the case at the same time and they will automatically connect to the smartphone, if it does not work the first time, repeat the action several times. Did not help? Manual connection: Turn off Bluetooth on the smartphone, and turn on both headphones manually, the indicators flash briefly in white, and on the right earphone, the indicator slowly flashes white after pairing between the headphones. And now turn on Bluetooth on your smartphone.
  • Use 1 earphone: To do this, take out only one earphone from the case, preferably the right one (the left one takes a long time to connect). On your smartphone, select “… Earbuds _R” or “… Earbuds _L” and sync. If done manually, the principle is the same as with two headphones.

How to turn off. The Disconnect page can be done in 2 ways: 1. put them in the charging case; 2.press and hold the touch pad for 5 seconds, wait for the red indicator light.

How to embed. Page To make it comfortable to wear and not fall out, follow the recommendations on page 2. Gently insert the wireless earbud and make sure it does not fall out, shake your head to be sure, and align so that the microphone is open and turned towards your mouth (when talking on the phone).

Manual Xiaomi Mi True Wireless Earbuds Basic

From the document you will learn: device overview, wearing, charging, turning on and off, using one and two headphones, factory reset, overview of functions, safety measures and warnings.

Support for Mi True Wireless Earbuds Basic

Mi True Wireless Earbuds Basic (Redmi AirDots Global version). budget wireless earbuds from Xiaomi. Juicy sound for modest money.

On the current page you will learn how to use Mi True Wireless Earbuds Basic, how to charge, how to connect, how to disconnect, how to wear correctly, etc. Navigation:

How to download the application manual

The Mi True Wireless Earbuds Basic TWSEJ04LS user manual is easy to download from our website. On the current page, find the picture “Download”, click on it. A PDF file will open in a new tab in your internet browser, which you can save to your device or read online. The document is very easy to download, for free.

Super, now you know how to use Mi True Wireless Earbuds Basic. The instruction in Russian is optimized and maximally compressed for easy reading on all popular devices. Easy to download in 1 click, no registration required.

Set up track switching and control music and calls

Music control options for Redmi AirDots and Xiaomi Earbuds are very limited. In particular, switching tracks is not possible here. Typically in other models, it is done by double-clicking or tapping. Here, the call of the voice assistant is assigned to this gesture.

xiaomi, earbuds, connect
  • Single press. pause, play or answer an incoming call.
  • Double. launches the voice assistant. All assistants are supported. Siri, OK Google, Yandex Alice
  • Holding one or more seconds. canceling the call
  • Double tap during a call. mute the microphone

How to Connect Bluetooth Wireless Earbuds to Phone. Tutorial 2020

The same applies to the volume. its adjustment by gestures from the headphones is not provided. However, there is a life hack. call the voice assistant and ask him to turn up the volume or switch the track.

Connecting Redmi AirDots or Xiaomi Earbuds to a smartphone

To connect to the phone, follow these steps. They are the same for both iPhone and any Android smartphone.

  • We take the headphones out of the case and wait for them to sync with each other. It is easy to understand that they have mated by the behavior of the indicator lights. Both modules will first blink white, after which one of them will go out and the lamp will remain on only on the master
  • Turn on Bluetooth on your phone
  • We find a device named “Redmi_Airdots_R”
  • Click on it and confirm the connection

Headphones are similarly connected to a TV or Smart TV Box. A separate publication is devoted to this topic on our website.

Turning on the headphones for the first time

As you know, Bluetooth TWS technology allows you not only to listen to music, but also to control its playback. And also with their help, you can accept or reject incoming calls on your smartphone directly from the headphones thanks to the microphone built into the headset. Redmi AirDots and Xiaomi Earbuds are no exception.

When you take out the Xiaomi / Redmi earbuds from the case, the first time you have to turn them on manually. Thank God that you don’t need to press any buttons on the case, as we saw when connecting Xiaomi Mi AirDots 2.

Subsequently, they turn on automatically after being removed from the case. No mobile app is required to set up, as some people think. This happens by built-in means of the Android or iOS operating system.

Deactivation also occurs by pressing the buttons, or by placing the headphones in the case. over, if you remove only the left one, it will turn off, and the right one will continue to work. If you put the right one in place, then both will turn off at once.

How to turn off Redmi AirDots / Xiaomi Earbuds headphones?

There are two ways to turn off Redmi AirDots / Xiaomi Earbuds. First of all, just put them in the case and close the lid. The connection with the smartphone is disconnected automatically. This is evidenced by the same LED indicator of the operating mode. The light will change from white to red, which means that the headphones have started to charge.

Another option to turn off wireless headphones is to long press the function button on each of them.

Connecting Xiaomi Redmi AirDots Wireless Headphones (Earbuds) to a Computer or Laptop (Windows 10 or MacOS)?

In this article, we will continue to study inexpensive wireless headphones. I will show you how to connect Redmi AirDots (in the Chinese version of Xiaomi Earbuds Basic) to a computer or laptop on Windows 10 or MacBook via Bluetooth. This model can work with any Bluetooth-enabled device, be it a PC, phone, TV or TV set-top box. Of course, the portability of the size of the headphones and the TWS wireless technology primarily implies use with a smartphone, so that you can also talk through the built-in microphone and control music. But like any other wireless headphones, Redmi AirDots / Xiaomi Earbuds can connect to a stationary computer or laptop on any operating system. Windows or MacOS on a MacBook. Let’s figure out how.

Connecting Xiaomi Redmi AirDots (Earbuds) to a computer or laptop on Windows 10

There is nothing complicated about connecting Redmi AirDots wireless headphones to a computer or laptop, no. For example, I constantly use my Xiaomi with a MacBook, on which I have two operating systems installed at the same time. MacOS and Windows 10.

The only thing is that it must have a Bluetooth module. In laptops, it is most often already built-in. But for a stationary computer, you may need to purchase an external USB adapter. I wrote about one of these in detail in an article about connecting wireless speakers to a PC.

The procedure for connecting headphones to a computer is the same as for a smartphone. First of all, we take out the Redmi AirDots from the case, after which they will turn on and synchronize themselves.

Next, turn on the Bluetooth adapter on the computer. If we are talking about a laptop, then often it can be activated by a separate button on the keyboard.

Next, click on the Bluetooth icon in the Windows panel bar and add the device

You can also turn on the wireless module and connect headphones from the “Start. Settings. Devices” menu

After that, we find in the list “Redmi AirDots R” or “Mi True Wireless EBs Basic R” depending on the modification of your model. Do not be surprised that after pairing the headphones to connect to the computer, only one of them will be visible, which is the main one. This is how it should be

It happens that the headphones are turned on, but are not visible in the system. This happens when you have previously connected them to another device, such as a phone. In this case, they themselves automatically connect to the last device to which they were connected. You can understand this by the indicator on the earpiece, which does not blink, but lights up constantly in white.

In order to delete them from the phone memory and connect with a computer or laptop, you need to go to the Bluetooth settings in Android or iOS, click on the name (Redmi AirDots R / Xiaomi Mi True Wireless Earbuds Basic R) and forget the device.

Check that one of the modules is blinking white. This means that it is in standby mode for connection to a computer or laptop. Accordingly, we connect the headphones with the “Connect” button

Then they will appear in the list of sound devices. Pay attention to the inscription “Connected voice, music”. It signals that Redmi AirDots can be used with Windows not only for listening to sound from audio or video files. But also thanks to the built-in microphone, work as a stereo headset for making calls, for example on Skype.

Everything happens very similarly with the connection of Xiaomi Redmi AirDots to the MacBook. I described the whole process in detail in a separate universal article dedicated to connecting a TWS headset with macOS. I will not repeat myself, just go and read.

BYRGPUB.COM 2021