Xiaomi earbuds basic how to connect

Despite the similarity of the majority of modern TWS headphones, the way they are paired with mobile devices may slightly differ from each other, and newcomers are perplexed by the fact that the smartphone does not see the headphones, one of them does not work, or there are some other problems with the connection. How to connect Earbuds Basic headphones to your smartphone and enjoy your favorite tracks without any wires?

First of all we open the case with the headphones, nothing happens, because in contrast to the Mi Earphones 2 Basic, which activate the search mode when you open the device, here it is just a cover, which does not let the headphones fall out and get lost.

Then we take out one of the headphones (let’s assume the left one) and see that the indicator light on it starts blinking rapidly in white and red.

This blinking means that the headphone is trying to find its counterpart and connect to it, but if you do not take out the second headphone from the case during this time, the indicator will slow its blinking and the headphone switches to search mode for a Bluetooth device to pair (smartphone, wireless speaker, laptop, etc.).).

When the indicator is blinking smoothly enter the Bluetooth settings of your smartphone and see the available device (in this case, the Mi True Wireless EBs Basic_L), where the L at the end indicates that as the main will be used the left earpiece, and if the R right one.

The earphone which will be connected to the smartphone first will be displayed in the name, and it is its charge level that will be displayed on the information bar at the top of the screen.

It is worth noting that if the left earphone is connected as the main one, the right one might not sync with it and will not connect to the phone, so it is desirable to take out the right earphone (Mi True Wireless EBs Basic_L) and connect to it first.

In case the synchronization does not occur, you will need to reset the Xiaomi Earbuds Basic to the factory settings. To do this, take both headphones out of the case, turn them off (by keeping your fingers on the buttons for a few seconds), and then hold down the buttons for 15 seconds until the headphone indicators start flashing red and white alternately.

Mi True Wireless Earbuds Basic reset (last pairing data forgotten) and you can reconnect them to your smartphone.

In the future, when you take the headphones out of the case, they will automatically connect to the last paired device, if it has the Bluetooth module enabled.

(1 goal., 5,00)

For proper wearing, place the earphone labeled R in your right ear and L in your left ear.

You can take turns using the left or right earbuds if you want.

xiaomi, earbuds, basic, connect

In case the headphones are not used, put them in the case for safe storage and automatic charging.

Xiaomi earbuds basic how to connect

Thanks to the mechanical button, which is located on the back of each of the Mi True Wireless Earbuds line, it is possible to control music on your mobile device, accept and reject incoming calls, as well as perform some other useful actions. How the Earbuds control your smartphone?

These instructions apply to at least six different models of headphones (because they are essentially the same device, but with minimal changes), namely Mi Earbuds Basic, Mi Earbuds Basic 2, Mi Earbuds Basic S, Redmi AirDots, Redmi AirDots 2 and Redmi AirDots S.

See also  Connect the phone to the TV via Wi-Fi Sony

Checklist for connection

It is important to follow these steps in a strict order. To successfully connect Xiaomi Earbuds to a smartphone requires:

  • Go to the settings of the smartphone, activate the connection via Bluetooth;
  • take the case in your hands and find the button on the side, hold it for about fifteen seconds until the indicator light starts flashing;
  • in the list of devices available to the smartphone, find the right gadget by name;
  • Select the device and set the connection.

Some smartphones require an additional password. The default password is 0000. When you enter a password the gadget is activated and you can listen to your favorite tunes at your pleasure.

For the first time “getting acquainted”, the device remembers the smartphone and connects to it as soon as the user opens the case.

Xiaomi Mi True Wireless Earbuds Basic 2S (TWSEJ07LS)

For almost 3 years I have been using the first version of the headphones AirDots (TWSEJ02LM). Not without its flaws of course, but on the whole everything was satisfactory. That’s just time is not sparing the battery, recently charging the box was enough for one charge of headphones, and this is very little. So I started to look for a replacement for them. My choice was Mi True Wireless Earbuds Basic 2S, because AirDots 3 has a lot of negative reviews, but I don’t want to overpay for more expensive models.

You can read about the functionality, sound quality and my experience with it in this review.

Package Contents and Appearance

Comes in a red and white box. Airbuds is the Euro version of AirDots headphones, so the box has inscriptions in both English and Russian.

The dimensions of the package: 150 x 76 x 31 mm and weighs 103 grams. On the bottom side there is a sticker with a hologram, which in theory should confirm the authenticity of the device.

But it is better to check. If you erase the protective cover of the sticker, we will see a 20-character code, which must be entered on the official website Mi.

When checking it will give us information about its authenticity and how many times it has been checked. Ideally there should be a message: “requested for the first time.

It seems to be a trifle, but these ears are often counterfeited. If you are worried about the quality of plastic, the lack of any functions, etc.д., Better check and return in time to the bad seller.

Moving on. The package includes the headphones themselves in a case, interchangeable ear cushions (3 sizes available) and instructions (including in Russian).

There is everything you need except a power cable. So if you don‘t have a USB Type-C charger, it’s worth buying one in advance.

The case has grown noticeably, its length 64 mm, width 44 mm and height 31 mm. Weighs 44 gr. (together with headphones). Increased size is justified by the battery, which expanded to 600 mAh, which provides up to 24 hours on a single charge.

Made of matte black plastic with a pleasant tactile feel. But over time, get dirty, scratched and it will be noticeable.

xiaomi, earbuds, basic, connect

On the front is a status LED, which glows red while charging and white for a minute after full charge (then turns off).

On the back side is the charging port USB Type-C. In fact, this is not a bad plus, no matter what, but Micro USB is gradually falling out of use.

On the underside are the technical parameters of the case.

The cover is held rather tightly by a magnet. And if in my old headphones to connect it was necessary to remove them from the case, the connection occurs after opening the lid.

The headphones are held in the case by very strong magnets but if you drop them on the floor they will fly in different directions. The headphones got a glossy surface and a touch button, which in my humble opinion is inferior to its mechanical analogue in terms of convenience.

Functionality expands the installed proximity sensor, which pauses the music if the headphone is taken out of the ear. I used to put the headphone out and put it in my. but now it doesn’t pause the music.

See also  Honor 8 factory reset

I like the middle earcups best, but you can change to smaller or larger ones if necessary. It is necessary to insert the headphones into the ear quite deeply, otherwise the sound will be quiet, and at the same time make sure that the microphone is open.

Now let’s have a look at the technical specifications and move on to the connection.

Mi True Wireless Earbuds Basic 2S TWSEJ07LS specifications

What the manufacturer listed on the back of the box:

Manufacturer Mi
Model Earbuds Basic 2S (TWSEJ07LS)
Profiles HFP / A2DP / HSP / AVRCP
Impedance 32 ohms
Sensitivity 90 dB
Sample Rate 20-20000 Hz
Management Touch buttons
Communication modules Bluetooth 5.0 (up to 10 meters range)
Protection IPX4 (against direct splash)
Case power Rechargeable battery 600 mAh (up to 24 hours of operation)
Earpiece Power Rechargeable battery 43 mAh (up to 4 hours of operation)
Extra features microphone, gaming mode, battery level indicator on the case, voice assistant call
Dimensions (body) 62 × 40 × 27 mm
Weight 35g (case), 4.2g (earphone)

Battery autonomy

I can not fail to mention the plus side of the device. a large battery, which provides long battery life. It is so good that using the headphones for 3-4 hours a day, I charge the case only once a week. That is a very good result for a 1600 piece of headphones.

I measured several times, the headphones are completely discharged in about 3 hours and 30 minutes. Putting them in the case will have to wait about 85 minutes for a full charge.

But it took me 160 minutes to fully charge the case (5V 2A).

Mi True Wireless Earbuds Basic 2S Instructions

Let’s move on to the pleasant moment. the headphones connection. All my latest phones from Xiaomi are based on the MIUI operating system, the Mi 9T will be used in the example.

Charged the case and opened the lid. The phone immediately detected the headphones and offered to connect them:

I press the “Connect” button and that’s it, you can not think of anything more convenient. After that, the screen shows the information about the charge level of each of the headphones and the case.

Everything is very convenient and informative, but it only works on Xiaomi phones, and MIUI version must be at least 12. If the animation does not appear suddenly, check in the advanced Bluetooth settings of the phone, the “Connect compatible devices” setting must be active.

On the other phones, everything is as usual, look for the headphones in the Bluetooth search.

Once connected, let’s move on to controls. When the lid of the case is opened, they are immediately connected to the phone, and are only disconnected if the lid is closed. The touch buttons themselves support several types of presses:

One-second press: Starts/stops playback, and answers/ends calls;

Double-tap: activation of the voice assistant on the phone;

Triple-tap: activate game mode with reduced delays;

Two-second hold: rejects incoming call;

Three-second hold on the panel with the headphones off: activation;

Five-second finger hold with headphones on: disconnect.

Automatically pauses when you take the earpiece out of your ear and continues playing when you return it back. You should get used to this feature, because you only need to close the proximity sensor (by putting the earphone on the table or into your ), and the playback will resume.

How to sync Mi True Wireless Earbuds

If the headphones are out of sync with each other, you can reset them to default settings. To do this, put both headphones in the case, they will go into charging state. Then press the touch buttons for 10 seconds (until the LEDs flash red and white 3 times). After resetting you need to re-pair with the phone and check operation.

Sound quality

But there’s not much to brag about. I can not call myself a connoisseur of quality sound, but even I felt the lack of volume. With my old headphones I listened to music at half volume, with this version I have to crank the volume to full.

See also  Sony TV can't connect to the internet

TWS НАУШНИКИ ЗА 2000р Mi True Wireless Earbuds Basic 2S [Честный Обзор]

In this situation, the equalizer helps a lot, but it works on MIUI from 12.5 and up.

And talk through them when I’m on the street near a busy road is just impossible, the interlocutor does not hear me, and I do not hear him. But I have to say, with time I’ve learned to stick the earphone deeper in the ear and not to cover the microphone, it is bearable.

The sound feels clearer, bass is enough (but not close enough). The highs do not cut the ear as much as the first version, but are a little present. I can’t find fault with the middle ones, they sound not bad. It can be said that for its price sound is good, but you can not expect much from them.

Switching tracks

By tradition, they don’t make a separate button for this function. We can control the volume and switching songs with the built-in voice assistant (double-tap). Or reconfigure the touch button action.

Buy Mi True Wireless Earbuds Basic 2S

You can buy the headphones on Aliexpress for only 1650.

I could not find a separate case for this model, but according to the Комментарии и мнения владельцев on 4pda, it will work from version 3 of AirDots.

To summarize, have I regretted replacing my old AirDots? No, I am satisfied with my purchase. Convenient connectivity functionality and great autonomy outweigh low volume and awkward touch buttons. And it’s hard to ask for much for 1600.

Another thing that really bothered me about the old version was the constant unsynchronization of the headphones. In the model from the review such problems do not, faults with the connection of course also happens, but it is very rare and focus on this I would not.

If you need a simple everyday headphone for listening to music for a walk and occasional calls. Xiaomi Mi True Wireless Earbuds Basic 2S is perfect for that.

Wireless headphones Xiaomi does not connect to the phone: who is to blame?

Xiaomi wireless headphones don’t connect to your phone? Make sure the headset is turned on, check the charge level, place the devices closer to each other, eliminate interference to the Bluetooth signal, check compatibility with your smartphone. Alternatively, do a reset, check that power-saving mode is enabled, or disconnect the headset from another device (phone, tablet, laptop, etc.). д.).

How to connect Xiaomi earbuds to your phone and computer

Quick instructions on how to connect both Xiaomi earbuds to your cell phone and computer. What to do if only one of them connects.

Xiaomi Redmi AirDots Pro wireless headphones were immediately liked by users, both in appearance and characteristics. And, of course, the price also came to mind, the more so that such earbuds (headphones) quickly became fashionable.

Sometimes there are problems when connecting AirDots to the phone, so we will briefly tell you how to do it correctly.

How to connect two Xiaomi headphones at the same time

How to connect two headphones Xiaomi? Charge the case with the earmolds, open the lid and wait for the two devices to sync, enter the Bluetooth section of your smartphone or other device. Find the Xiaomi headset in the list and click on it to connect. If required, enter “0000” or other code for pairing. Below we will look in detail how to connect both headphones from Xiaomi, and what are the peculiarities of this process. Separately, let’s understand how to configure the device, and what errors can occur.

Supports Mi True Wireless Earbuds Basic

Mi True Wireless Earbuds Basic (Redmi AirDots Global version) budget wireless headphones from Xiaomi. Great sound for modest resources.

On this page you will learn how to use Mi True Wireless Earbuds Basic, how to charge, how to connect, how to disconnect, how to wear properly and more. Navigation: