What if the TV does not play videos from a USB flash drive?

It costs to immediately turn a few large fragments of the problem under consideration. This equipment and software environment. If the first is all more or less clear, we are talking about the hardware, then with the latter everything is much more interesting. The fact is that the operating system of any TV is built on the principles of mobile platforms. Especially if we are talking about smart at LG, Philips, Samsung or Sony.

Part of operating media smart TVs are unique. Others are both android familiar users. It is this OS that Sony TVs, Philips and many other. Naturally, there is an accurate binding to the formats of recognizable data and file system standards, which must be present on the connected storage device.

No USB port support

The reason why the flash drive is not readable is sometimes quite a banal: TV receiver has no support for drives connected to USB inteeis. In this case, the connector-jack is usually written ServiceOnly. This shows that the inteeis is intended only for diagnostic operations, reading problems and statistics of the state of individual hardware modules in workshops equipped with the corresponding tool.

In this situation, the storage device is not available due to the features of USB intees. In some TVs, it can be made available to the operating system. However, it is necessary to make unlock in authorized services, because there is a difference in the implementation of motherboards and other electronic components even within the same model line.

Wrong format

If the TV does not see the flash drive, and the computer sees it is worth checking the format of its file system. For this:

  • The drive is connected to the computer;
  • Open the disk manager or just click on the “My Computer” icon in the Windows OS;
  • Right-click on the flash drive disk icon and select “Properties” from the drop-down menu.

Here on the first tab will indicate the type of file system. If NTFS is written, it means that the TV does not read the flash drive due to the lack of support for this standard. All without exception TV and mobile devices work with EXFAT markup. To eliminate problems you need the following:

  • After clicking the right mouse button (PKM) according to the algorithm described above, you need to select “format”;
  • In the dialog that appears in the top list, you need to find and specify the EXFAT version;
  • Press the “Format” button.

Important! It is worth remembering that such an action will destroy all files on the flash drive. Therefore, if it has important data on it, they need to be saved to record re-after the formatting process.

Too big volume

TV Instructions are a very useful and interesting document. It should be studied carefully. At least in order to know which maximum volume of flash drives is supported by the model. This value may be relatively small, for example, 32 GB. While today is massively used drives 64 GB and above.

If the volume of the flash drive is more maximally supported by the TV, it will simply not see the drive. That is, not to show it as a device in the system, will not be able to read the list of files and so on. To do in this case practically nothing can. The only option for the owners of the smartness is to change the firmware of the TV. But it is most often useless.

Incompatibility of file formats

PC users are familiar to this setting when, when viewing the contents of the disks, the files with the attribute “Hidden” are not visible. Some TVs have a similar option. If the operating system sees an incompatible format, it hides this file to view. That is, not just the film is not reproduced, it is not visible at all in the contents of the drive.

In the instruction manual of the TV, it is defined whether the files are hidden if the system does not support video format from a flash drive. In some models, this setting can be turned on or off. Therefore, if there is confidence that there are confidencers on the drive, and in the system they are not visible, it is recommended to familiarize yourself with the documentation for the TV model.

View movies and photos on TV with USB flash drive

First you need to download the movie and throw it on the USB flash drive. Or copy some photos to the drive, or music. You can create folders and put files in them.

Among the sources should be “USB”, or “Media” (“Media”).

If the SMART TV TV, then you can run the application that is responsible for viewing media files on external drives. On Sony, Philips, Dexp, Kivi TVs (which on Android TV) is the Media application (“Media”). And you can install some sided conductor or player and use it.

Reproduction can be controlled (pause, rewinding, next / previous roller / track) using the buttons on the screen, or on the remote control. On my Philips, for example, if you close the movie and run again, it will offer to reproduce it from the place where the view was stopped.

TV stopped seeing a flash drive

So, the TV does not read a flash drive. To solve this problem, you need to know the nature of its appearance. What does it mean? And the fact that only after identifying the problem can be correctly selected the solution. Soon you will understand what we are talking about. Best.

See also  IPad does not turn on battery. Apple Support Recommendations

Step 1

To begin with, it is worth checking the work of the USB itself: it may be that the problem is in it. To do this, connect another device to your TV and see if it works correctly. And you can also connect a problem drive to other TV to make sure its malfunction.

Step 2

Install the device for storing and transferring information to a computer or laptop. If your PC does not see it, you will have to solve another problem. If the device sees a flash drive, then transfer all the data to any folder on the computer. Then format it in FAT32 format, with which your TV will work. After that, you can copy, for example, the film and check the operation of the equipment on TV.

Step 3

Naturally, you must need a flash drive to check for viruses and other malicious codes using special antivirus software. This operation, like the previous item, should be done on a computer or laptop. Only after full scan, as well as the calibration of the drive, can be re-inserted into the TV.

Step 4

So, still does not read TV drive. Look at the amount of your device: It happens that the USB size of more than 32 gigabytes is not defined by TV. This, of course, is a rare case, but it is not worth excluding it from possible options. Try connecting the device to the smaller volume and check its performance.

Step 5

If the TV sees a USB drive, but does not recognize the files recorded there, then rather, the problem concerns them. Look at the computer format of this data, then relate it to supported TV formats. This information can be obtained either on the Internet on the manufacturer’s website, or in operation instructions, which goes complete with equipment.

Step 6

Incompatibility or conflict of formats can be another likely reason why it is impossible to use the capabilities of the drive from the TV. Most of these receivers can see and recognize files in the FAT32 system. However, the flash device can be formatted under the NTFS format, which on TV will simply fail to recognize. Before the start of operation, you can familiarize yourself with the manual.

Therefore, if the flash drive system is different, it is best to save the information on it, after which it is possible to reformat. To do this, act as follows:

TV can “do not like” the names of the files that we want to reproduce. Therefore, it is preferable to call them in Latin lites, or in the form of a sequence of numbers, or a combination of these options. This is due to the fact that not every TV model is capable of recognizing Cyrillic. Also, the problem may be in the conflict of file formats that we need to read from the TV. most often faced with this when playing video files. TV operating instructions will tell you which formats can be opened.

The port with the inscription “USB Service ONLY” cannot be used to play media files

does, play, flash, drive, support

Step 7

If the Flash device was previously determined, and then suddenly such an opportunity disappeared, it is possible that we are talking about wear system. In other words, appear, as on the hard disk, broken sectors that interfere with normal operation. To determine this malfunction, insert it into the PC, then we are looking for the “Computer” tab. Press the right click on the flash drive icon. The menu is displayed on the screen in which we select the section with properties. A new window will appear before us, where it will be necessary to choose the item “Service”. Now we find the “Check” command and launch it to start. Select options to restore broken sectors and correct system errors. Data processing begins, at the end of which the system will display the results.

Step 8

If the manipulation has not led to any result, you can contact the service center to troubleshoot that may be more serious than you think. Do not forget about the manufacturer’s guarantee to your goods: if you yourself did not break anything specifically, and the problem turned out to be a factory marriage, then you have legal right within a certain time for free warranty service.

Step 9

In no case do not disassemble or tv or drive. You can damage some of the components of the devices, thereby making it only worse. If the problem lies in USB, then do not torment TV, but simply replace the device to a similar. Agree that it will be cheaper to change it than to buy a new TV, the value of which can noticeably shake the family budget.

Permissible memory

Certain models TV LG and SAMSUNG have a limitation by volume of connected external drives. As a result, Samsung TV does not see USB USB flash drive and above. You can solve the problem with only one method. apply a smaller drive.

Another common problem. TV does not work with the file format. This is especially true of video files. Open management and find which formats support your TV. Most models do not support MKV format, but all work with AVI. Sometimes video is playing, but there is no sound.

does, play, flash, drive, support

In order not to deal with a similar problem, we find a list of permissible formats and strictly follow it.

Next reason why the TV does not see the connected USB flash drive, and the computer sees. this is the name of the file. TV perceives files signed by numeral or latin, and reacts poorly to specialimlists, Cyrillic. To exclude such a factor, it is better to immediately rename all files.

The flash drive is not visible due to the large amount of memory

In the firmware of the TV laid the maximum amount of the memory of the media, with which it is possible to work. Old TV often may not see the outer flash drive more than 8 or 16 GB. Modern models of television receivers are designed for drives with 32 and even 64 GB of memory.

Output can be a television flashing. Make it can only specialist. Yes, and bother so only for the sake of connecting flash memory inexpedient. Therefore, it is better to transfer the file (video, film, music) on a smaller flash drive.

If there is no less than bulk flash drive, you can create a section with an optimal memory size on the current drive. Actions are performed on the computer via the command line. The process is described in detail in video.

See also  How to connect airpods to tv. How to connect Bluetooth headphones to a TV without Bluetooth?

You can find out the memory constraints for connected external devices from the documentation for the TV. If there is no information in the characteristics, contact support on the official website of the manufacturer. Popular brands provide support in Russian.

If the files on the drive are visible, but do not open (do not reproduce)

TV just does not support the desired codec

Solution: Download the file in another quality or convert it. Open the device specification and see which files support TV.

Those. TV characteristics. which files support

To help!

How to convert video to mp4. [cm. Instructions for steps]

The file is too big (more than 10-15 GB).

Solution: Recode it to a smaller size (reload in another capacity).

Note: This often happens when users are inhabited, and short-loaded files from torrent trackers are sent to the drive.

Solution: Replace to the whole (downloading repeatedly). Check flash drive antivirus.

Why the tv does not recognize the external drive

Failures when connecting an external drive to a TV can occur quite often. But this does not speak at all about breaking the flash drive or the TV itself. The reason why the TV does not see the flash drive may well become an incorrect connection of an external drive. It is easy to fix by studying the user manual attached to TV. It, as a rule, describes in detail the procedure for connecting any external devices and their withdrawal to it. If after checking the correct connection it was revealed that the cause of the problem is not in this, you should search for another reason for its appearance. The most common and often arising from them can be:

  • Conflict of instrument formats.
  • Fault of an external drive.
  • Availability of a limiter preventing reading flash drive.
  • Availability of port blocking.
  • Availability on a data flash drive with an extension not supported by a TV.

The reasons for the education of the conflict between devices are also referred:

Before connecting a flash drive to TV, it is recommended to read the user manual attached to it, especially paying attention to:

  • Instrument compatibility parameters with external information carriers;
  • Restrictions on the possible amount of memory from the flash drives connected to the TV;
  • Availability of this model USB output.

In case the instruction does not help, it is recommended to check for the flash drive itself, inserting it into a computer USB port or laptop. If these devices “see” it, then it is working and it is necessary to continue to find a solution to the problem.

TV formats and flash drives are not compatible

The reason for the error of reading the TV flash drive can perform incompatibility of the type of files loaded to it with TV software firmware. Easy to read by device FAT 32 files. If the drive has been formatted using the NTFS system to it, the TV can no longer read it.

If it is revealed that the reason for this, then the only solution to the problem will be re-formatting the flash drive. To do this:

  • Connect the media to the computer;
  • Open the “My Computer” folder;
  • Click right-click on the flash drive icon;
  • We find the command “Format” and click on it. Starting formatting a flash drive, do not forget to copy all files available on it, because after completing this process, all files on the media of the information will be deleted;
  • In the window that appears in the “File System Type” line, select “FAT 32” and click “format”;
  • After the format process is completed, the USB flash drive can be used.
  • We try to install it again into the television port. If now he does not see her, then the problem is in something else.

Restriction on the read amount of the external device

Certain models of TVs have limitations regarding the memory of the external device connected to them. they are not able to read the data from the drive size of more than 32 GB. To determine the permissible volume of the connected drive, refer to the TV instructions. If the carrier does not fall into permissible criteria, you will have to look for a replacement.

Format conflict

In some cases, the TV cannot read the files of a specific format, since its software simply does not support. Speech in this case goes about non-standard expansion files. All file extension supported by the instrument can be found in the instructions. If your file does not apply to any of the formats listed in it, it can be converted to the desired format, using a special program that can be easily found on the Internet.

Sometimes the file may not be opened due to the problem of reading the TV of his name. Some instrument models can only recognize the digital name or only Latin letters. Try renaming the file or remove foreign symbols from its name, after which you re-connect the USB flash drive to the TV.

Availability of a port with the inscription “USB Service Only”

On some instrument models, you can find a USB port with the inscription “USB Service ONLY”. It means that this output is used only in service centers for repairing this model, and from reading information from ordinary carriers it is blocked. Lock can be removed by contacting this help to a specialist or try to do it yourself, but only if you have certain skills regarding this operation. Try to remove the lock without having an idea of ​​how it is done is not worth it because it is possible to deal with the entire device. For example, to remove the lock from the LG TV port, you must perform the following actions:

  • Prepare a job tool. Mandatory need soldering iron and indicators.
  • Open the “Service” menu.
  • Swire two indicators and connect them to the speaker system of the TV.
  • Download audio files and install them on the device.
  • Run them playback, submitting indicators to the infrared emitter.
  • Install on your mobile phone Service Control Program
  • Go to her and choose the ToolOption tab.
  • We change the set parameters, exhibiting instead of 0 digit 1. So you can view images and listen to audio files from any portable devices.
  • For the opportunity to watch video, change DivX on HD. Do not touch the remaining parameters.
  • Save the modified parameters.
  • Turn on the TV and connect the USB flash drive.

Failure files

If the flash drive has already been used on this TV earlier, and it determined it, and now it does not see, then the problem can be in excessive wear of the external disk sectors. To check if it is, it is necessary to make the following actions:

  • Connect a flash drive to a computer;
  • Go to the “My Computer” folder;
  • Click right-click on the appeared external device icon;
  • In the menu that opens, find the “Properties” section and go to it;
  • In the window that appears, click on the “Service” button;
  • Select the section “Check disk” and click on the “Check” button;
  • A window appears that requires allowing the operation. allow.
  • A window will open in which you want to put ticks opposite items to “check and restore damaged sectors” and “Automatically correct system errors”;
  • Click on the “Run”;
  • After the check is completed, a window appears that displays the errors present on the accumulator and possible methods of correction.
See also  How to create an account on Samsung

TV does not see a USB flash drive, movies and videos on it. causes and solving problems

We will tell us in turn on possible causes and methods of solutions.

Hardware faults: broke USB output, flash drive itself or TV

The first reason that can come to mind when problems with reading flash drives are faulty. But the truth. the TV may not recognize the USB flash drive, if it can not be used in general in principle. But then it will not work on PC. insert it into the computer.

If he does not see her, you have to change the flash drive. It is a pity there will be only files that were there. If you do not have their backup, you can try to attribute a flash drive to a service center so that the specialists look at it and tried to restore from there at least some data.

If the PC sees a flash drive, and TV is not, it is possible, the case is either at the TV itself, or in the USB connector. Look, is there an inscription usb in service only above the slot. If it is, it means that you will not be able to connect the usual USB flash drive to TV. This output is locked. intended only for service services that carry out repair work with TV.

If you see that the USB In Service only is written above, it means that you can not use them, as it is blocked

If there are no inscriptions, connect any other flash drive to TV. If he and she won’t see it, it means that either a slot broke or TV. You need to call the wizards to be able to eliminate hardware malfunction.

TV does not support volumetric flash drives

Some TVs have limitations on the amount of memory that can withstand the device. For example, many models TV refuse to perceive carriers 32 GB and higher. Take a look into the instructions for your TV and see if there is such a limitation. If it is, it means you will have to buy another flash drive. If there are no restrictions, we go further.

TV does not support File System Flashki

If the PC sees a flash drive, but there is no TV, while the TV can recognize, for example, another flash drive, possibly the problem in incompatibility of TV file systems and drive. TVs usually read only flash drives with FAT32 file system. If NTFS stands on the media, it will not be possible to use it on TV. Look in the instructions for TV, which file systems are supported by your device.

If the file systems do not match, you just need to format the USB flash drive in the new format. You can do it on PC:

  • Connect USB flash drive to PC. If it opens on the computer, copy all the files to the PC hard disk from there, since further formatting will mean the removal of all information from the flash media.
  • Now on the main page of the “Explorer”, click on the flash drive of the right key and select “Format”.
  • In the new window in the File System menu, specify FAT32.

As a file system, we put FAT32

TV does not define the format of files recorded on removable media

If the flash drive opens, but some files are not played on it or if they are missing or defined as unknown, most likely your TV does not support their playback. Often this happens exactly from video. Refer to the instructions of the TV: In the specifications, find the formats that are suitable for your TV.

If file formats do not match, download the same file from the Internet (if, for example, this movie), but already in the new necessary format. You can also translate the existing file to the required format using an online converter, for example, Convertio.

Another reason is the wrong file name. Try to rename it on the computer if Russian letters or some special characters are present in the title.

File system failure

If you have previously connected a problem flash drive and TV saw everything and played, you may have broken sectors on the flash drive. Check if they are, and immediately restore them will help the staffing tool “Windows”:

  • Connect media to PC. In the “Explorer” section with all drives, click on the flash drive of the right mouse button and go to its properties.
  • Open the “Service” section. Click on “Check”.

Viral defeat of files

SMART-TV sometimes suddenly ceases to determine the drive, with which she successfully worked for quite a long time. Unfortunately, but this failure is not uncommon. Sources are different. It is possible that the file system has occurred or spoiled sectors on the flash drive. If they are not so significant, but the reason is specifically in the system, the standard operation of reformatting will be able to help. The user needs to remember that this process is ruined absolutely all information on the carrier. In addition, it is necessary to correctly install a compatible file standard with a television.

Problems occur when the flash drive is simply exhausted physically because it is not eternal. Often, the prerequisite for serious failures in the work of the drives, the destruction of the flash system of malicious viruses becomes. In this situation, a high-quality antivirus software product and secondary formatting can assist in this situation. When using a flash card from various mobile phones and download files from the network, the ability to hit the virus to the Flash drive is very high.

BYRGPUB.COM 2022