The printer Brother DCP 1602R is slowly printing

If the speed is approximately the same as indicated in the technical characteristics, then everything is in order with the printer. However, you can check some print settings, it may be possible to speed up the work a little:

When the test shows that the printer really prints much slower than it is stated in technical characteristics, the problem can be in the printer, in the computer, and in the connection between them.

  • Try to drop the printer settings to the factory, suddenly you accidentally put an extra checkmate somewhere or removed the right.
  • The printer can slowly print or hang during the task of completing the assignment due to problems with services. Restart the print manager.
  • Completely delete all the printer drivers and install software again.
  • If nothing has changed, it is worth checking the computer for viruses and restore damaged system files. If Windows found damaged files, but could not restore them, think about reinstalling the OS.

Connection

Also, the seal can slow down the wear of some details. If you have not solved the problem on your own, it is worth attributing the printer to the service.

Startcopi Conference Printers, Copy devices, All-In-One Printer, Faxes and other office equipment: repair, maintenance, refueling, choice

P.S. Brother technical support also did not help.

(0) In order not to be fooled, do the “zero first” discharge. And look at the mechanism of “closing” the back cover.

Get out of the quiet printing mode of the GO key nine times. When a quiet mode is turned on, all LEDs blink twice.When turning off the quiet mode, all LEDs blink once once.2. Break the sweatshirt LV0768001

(1) Tell me how to make it. In the service manual found Initialize Eeprom Parameters. But this is done only on LCD models. If not, tell me how. And what does “look at the mechanism” closing “the back cover”? What exactly to watch?

(2) The device costs for a long time, so I forgot to write that the quiet mode turned on, turned off, the result is zero. The sweatshirt calls properly.

(3) The manual indicates the method of entering the service and for the “shameless” printers.And if you open the back cover, then the printer goes into the “super.made mode”.

(5) I enter the service, I can’t figure out how to make a discharge.Then it turns out that the formatter board is buggy?

(6) In the End-Yuzer menu there are points “Factory Reset” and “Settings Reset”.

Finally brought a deliberately working apparatus (though HL-540DN). So he falls into an error with an open rear lid. It became clear where to dig.The problem is solved.Initially, the client brought 2 devices with the same problem: Slow printing. But the inattention and ignorance of the principles of the work of this model (before that they dealt with only 5250. 5350) did not attach importance to the fact that they have one duplex for two. But it turns out only in the presence of a duplex the device works as it should. Verdict: 1st. The installation of the duplex solved the problem. 2nd. The problem solved “Settings Reset”.Thank you for your help!The topic is closed.

The printer thinks for a long time before printing. a common phenomenon caused by a malfunction, malfunction or incorrect configuration of the device. The productivity is affected by: the condition of cartridges, the amount of RAM, the presence of drivers, the quality of communication between PC and peripheral equipment.

To restore the functionality of the apparatus, it is necessary to accurately determine the main reasons why it began to slowly work. What to do and how to eliminate the malfunction yourself you will learn from this article.

  • 1 Compare the real and factory indicators of print speed
  • 2 Quick way to determine the culprit of problems: printing a test sheet from a printer
  • 3 Elimination of malfunctions
  • 3.1 in the printer
  • 3.one.1 Circus Carecathing
  • 3.one.2 Cartridge replacement
  • 3.one.3 Reset of settings
  • 3.one.4 Cleaning the Printing Queen
  • 3.one.5 Increase RAM memory
  • 3.2.1 Print Settings Verification: Reset to the factory installations
  • 3.2.2 We free up the memory of PC: Close unnecessary programs
  • 3.2.3 hanging out programs
  • 3.2.4 reinstalling the driver
  • 3.2.5 Using service utilities
  • 3.2.6 Search for viruses
  • 3.2.7 recovery of system files
  • 3.2.8 Checking the presence of a slow print on another PC with a problem printer
  • 3.3.1 check USB port, cable (replacement if necessary)
  • 3.3.2 Wi-Fi
  • 3.3.2.1 Control of the connection
  • 3.3.2.2 large distance between devices
  • four.1 non.original cartridge
  • four.2 pollution inside the printer: clean the contacts, rinse the print head
  • four.3 incorrect position of the SNPCh loops

The printer slowly begins to print, how to fix it?

According to users, if the printer is slowly starting to print, perhaps the problem is in the printer driver. Sometimes the driver can be damaged, and to correct it, it is recommended to reinstall it. It is quite easy to do, and you can do this by performing the following actions:

  • Open the device manager. The fastest way to do this is to click the “Start” button and select the device manager in the menu.
  • Find your printer, click it with the right mouse button and select Remove the device in the menu.
  • Когда появится диалоговое окно подтверждения, установите флажок Удалить драйвер для этого устройства. If it is available and click the Delete button.
  • After successful removal of the driver, click the icon to scan for equipment changes.
  • Now Windows will try to install the default driver for your printer.

If Windows manages to find a suitable driver for your printer, check if the problem is saved. If the driver is not found, you will have to install it manually. To see how to do this, check the next solution.

Update the printer driver

If your printer begins to slowly print, perhaps the problem is in the driver. Sometimes your driver can be damaged or outdated, which can lead to this and many other problems. However, you can easily eliminate the problem by updating the printer driver.

The easiest way to do this is to visit the manufacturer’s web site of your printer and download the latest versions of the drivers for your model. To do this, you need to know the model of your printer and where to look for a driver.

If this process seems a little complicated to you, you can always use third.party tools, such as Tweakbit Driver Updater. To automatically update all obsolete drivers of all a couple of clicks.

Here is a brief guide to use this automated tool:

  • Download and install Tweakbit drivers update a tool for updating
  • After installation, the program will start scanning your computer for obsolete drivers automatically. Driver Updater will check the versions of the drivers you set according to its cloud database of recent versions and recommend the correct updates. All you need to do is wait for the end to the scanning.
  • Upon completion of scanning, you will receive a report on all problem drivers found on your PC.View the list and see if you want to update each driver individually or all at once. To update one driver at a time, click the “Refresh Driver” link next to the name of the driver. Or just click the “update everything” button at the bottom to automatically install all the recommended updates. Note: some drivers should be installed in several stages, so you will have to press the “update” button several times until all its components are installed.

Refusal of responsibility: some functions of this tool are not free.

As soon as your printer driver is updated, the problem should be completely solved, and everything should start working again.

Horizontal stripes when printing

Horizontally strips. a sign of wear of a photo printer photovat. If the toner is enough and he did not wake up, it is worth evaluating the state of this part. A knot of fixing the image may also get out of order. To avoid the appearance of dark and light strips across the sheet, it is important to ensure that particles of dust and dirt do not get inside. Inkjet models are also printed with horizontal stripes due to the clogged print head.

The design of such devices differs from the internal device of the jet. Inside you will not find standard cartridges for them with multi.colored ink, because the seal is carried out thanks to a special powder: Toner. It fills a special bunker consisting of several elements. Most often, the All-In-One Printer will crawl because of it.

If dense vertical stripes on the sheets appear in random places, and when printing documents, the pattern in their location is not traced, it is useful to pay attention to the state of the cartridge used. If the seals and elastic bands have not become tight enough or cracks appeared on the housing, and the toner is spilled out, it must be replaced with a new.

When heterogeneous stripes appear, consisting of dots or spots, it is worth checking whether the cartridge has been tilted correctly. This version of the striped print may indicate that the tank with a spent bulk substance has been overflated. In rare cases, the reason for the poor.quality imprint in the metering blade (rocket), which was incorrectly established.

White stripes located longitudinally and in certain places on the page usually indicate that the toner ends. The problem is solved by refueling. Sometimes colorless lines. the correct sign that an extraneous item fell under the cartridge. To check this, you need to de.energize the printer, let it cool. Only then you can open the cover of the device, disconnect the bunker and carefully remove the excess.

If the lines are located horizontally, this is a sign of a violation of the contact between the magnetic shaft and the photo bank. It arises due to the toner used by the toner or its sprinkle outside the vessel. It is necessary to de.energize the equipment and carefully remove the powder without using detergents. The second reason is damage to the drum, shaft or rocket. The best solution would be to replace parts with new.

The wear of a hollow tube with a core is also evidenced by wavy transverse stripes, dots, spots. Black fishing line for a trimmer with uneven edges, passing clearly along the edge of the sheet. a sign of a malfunction of the photo. All these breakdowns should not be tried to eliminate yourself. The laser printer is quite sensitive to mechanical stress, so it is better to entrust its repair to a specialist. So the risk of damaging the mechanism comes down to zero.

Strips when printing on a jet printer

One of the common reasons for the uneven printing of jet models is the lack of ink in the cartridge. If before the appearance of dark or light lines on the sheets you printed for a long time, you need to check their number. This is most convenient to do through the menu, but more often the printer itself displays information about the ending paint on the computer screen. The best way to solve the problem is to buy new consumables.

If an ink system is connected to office equipment, information about their level will not be displayed correctly. It is more convenient to control it independently, determining the fullness of the eye. The problem with the lines will help solve a gentle refueling in compliance with the recommendations of the manufacturer. It is important to carefully consider the train, according to which ink enters cartridges. There should be no bubbles inside, and excesses and clamps are unacceptable. You can check the air filters. If they are clogged with particles of dust, this will cause strips when printing documents.

If you are rarely printed, and after 1-2 weeks of downtime, the printer began to break down, it is worth examining the printing heads. Inkjet models are so arranged that the coloring substance in them periodically dries out if the device does not use regularly. Dubs dried ink are scored. special holes on which they enter the head. This leads to the formation of contrasting lines on paper.

Modern models support automatic cleaning of cartridges. To execute it, just run the corresponding option in the menu of the device. The procedure should be repeated 2-3 times, and then leave the equipment at rest for half an hour. If this did not help, you need to rinse the dozed duzer. But cleaning the PG using household chemicals is not recommended. This is a fairly expensive detail, the breakdown of which can turn into a more serious repair or purchase of new equipment. If the functions of built.in cleaning are not enough, you should contact the service center.

A rare case. malfunctions in the work of software. Sometimes viruses interfere with the correct work of the manufacturer’s utility. If the antivirus has found them, you should clean the computer and reinstall the equipment drivers. They are easy to find on the official website of the manufacturer, and sometimes a disk is sold with All-in-One Printer. Less commonly, the stripes appear once due to interruptions in the supply of electricity.

If the listed measures do not help, the reason may be in violation of the tightness of the cartridge. Malfunction often occurs when trying to refill it manually. To check the integrity, it is enough to shake it over a clean sheet of paper. If points or spots remain, it is not sealed and needs to be replaced.

If you print for a long time, sometimes such a problem arises as clogging of an encoder disk or tape. If paint or dust enters them, horizontal strips will appear on prints. To get rid of them, you need to carefully cleanse the surface of contaminants. For this purpose, it is recommended to use a dry or slightly moistened napkin.

Trouble-shooting

As soon as you are convinced that your car works slowly, you can speed up its work, after checking the availability of common problems. In each case, professional maintenance and repair may be required.

In the printer

Slow printing is usually caused by a malfunction of the device itself. If you notice a decrease in performance, follow the recommendations below.

Checking the power cord

Slow down is due to a change in energy consumption caused by a drop or a voltage jump in the network.

  • Turn off the car and disconnect the power cable. Make sure that it has no damage: scratches, cracks, breaks and other defects.
  • Remove the network filter, extension cord or other intermediate devices between the machine and the electric outlet.
  • Connect the power cable again, turn on the device, perform a test printing system through the Windows control panel.

If the printer is still working slowly, this means that the problem with nutrition is missing. In this case, check the hardware and software.

Replacing the cartridge

The speed and service life of your equipment depends on its components. One of the reasons for the slow print is the installation of the wrong cartridge. This usually happens when an incompatible consumable component is inserted into the device. The speed and quality of the print is reduced, and spots, color defects and blurry appear on the sheets.

What can be printed and done on a 3D printer. The possibilities of home and commercial use of a 3D printer

To correct the situation, replace the cartridge with the printer manufacturer recommended. This will restore normal speed and reduce the risk of product failure due to poor-quality details.

Reset

In case of abnormal operation, it is necessary to reset software settings. This operation can be performed in two ways: reinstall the device driver on a computer or perform manual reset. The procedure depends on the manufacturer and model. To reset the printer settings, refer to the user’s user management for detailed instructions. As an alternative, you can try universal methods of resetting settings.

Cleaning the Print line

One of the reasons for the slow operation of the printer is the overload. This happens when the user prints documents with a large number of pages or graphic contents. Cleaning the line will unload the peripheral device and increase its performance.

  • Open the start, select devices and printers and find the image with the name of your printer.
  • In the upper part of the panel, click “View the Printing Establishment” the window with a list of documents will open. Select a “printer” and select “Clean the Print turn”.

There are other ways to clean the queue.

Increase RAM memory

If your printer uses RAM, this method will increase the print speed. An increase in the amount of RAM will prevent the printer overload with a large number of pages or documents of different sizes. Please note that this function may not be available in all models.

Windows method to increase peripheral devices:

Another option is to install an additional module of RAM, if the machine has an appropriate slot. This will accelerate the operation of the machine if it prints too slowly, and eliminate the risk of a document breakdown.

printer, brother, slowly, printing, solution

In a personal computer

Print speed depends not only on the technical characteristics of the printer, but also on the computer. If the device works slowly, make sure there is no malfunction or computer problem.

Print settings check: reset to factory installations

On the computer, the printer operating mode can be set manually depending on the quantity and content of documents. For this, there are print settings that can be set through the control panel.

Go to the device tab and printers, find the right device and click it with the right mouse button. Select “Printing Parameters” in the context menu where you can set the optimal mode, change the paper used, as well as the quality and resolution of the graphic material.

Some models are equipped with Quiet Mode, which increases the speed when turning off. Reset to factory settings is possible only for some printers, for others you will need manual configuration of all parameters.

We release PC memory: close unnecessary programs

The performance of peripheral devices depends on the slow operation of the computer. If your computer works slowly due to memory overload, this will affect the print speed. The easiest way to free up the RAM is to close unnecessary programs.

  • Go to the “Start” and enter the “Task Dispatch” dispatcher in the search field, run this application. You can also call it using the CtrLaltDel key combination.
  • In the window opened in the “Appendix” tab, select unnecessary programs and complete the “Remove task” command. As a result, unnecessary applications will be closed, which will reduce the load on the processor, free the memory and speed up the work of the computer.

Similarly, you can view the list of active processes and services on the corresponding tabs of the device manager.

Driving programs

In low.performance computers, freezing occurs at the moment the printing starts from the printer. This usually happens when printing JPG and PDF documents, since they require more computing power than conventional text files.

There are several ways to avoid freezing:

Fix Brother wake from sleep problems – part 1

  • Increase the amount of RAM of your computer.
  • Clean or replace the cooler, thermal grease (when the system unit heats up hard).
  • Setting up the auto start of applications and services.
  • Scanning for the presence of viruses.

In some cases, the cause of slow print may be the incompatibility of the printer and computer. This often happens when a new peripheral device is connected to an outdated computer. The problem arises with both jet and laser printers.

Print settings

This is a simple test for determining the actual performance of peripheral devices on PC with Windows OS. If your printer thinks for a long time before starting, print a trial page.

  • Press the Start button in the lower left of the screen and in the menu that opens, select devices and printers.
  • Find the name of your apparatus in the list, insert the mouse cursor on it, click with the right button and select the Printer properties.
  • In the window that appears, click the ‘Test Print’ button, which will send a test sheet to the printer, and you can evaluate the speed of the printer.

If the device prints slowly or does not respond to commands, follow the advice of Windows support service. To do this, click on the line that appears in the window when sending a test sheet.

Brother printer slowly prints

Sometimes it happens that the printer print speed drops. The device does not stop working, but each sheet is spent more time than usual. This can be caused by a failure of the USB connector or cable. Often, All-in-One Printer prints slowly due to damage to the main board or contact group.

  • Particles of dust or ink fell into the contacts, because of which they clogged.
  • Connecting the printer with a computer or laptop over the network unstable.
  • False former.
  • Repair the main board or replace it with a new.
  • Clean, repair or put new USB connectors.
  • Clean the contacts All-in-One Printer.

Leave us your phone number and our specialist will contact you within 10 minutes!

Leave us your phone number and our specialist will contact you within 10 minutes!

We are an authorized service center in Krasnodar, we offer repair of printers and plotters, as well as refueling cartridges. We carry out all types of work, from reinstalling software to replacing the main units of the device.

  • Repair on the day of circulation
  • The possibility of payment by p \ s
  • Warranty up to 3 years
  • Discounts for regular customers
  • Original components
  • Express delivery

I contacted the repair of Plotter, it was necessary to do very urgently since the work stopped, the guys helped very quickly! I recommend!

Great service! Plotter serves us. Always quickly and quickly eliminate problems. We also refuel cartridges from them. Thanks to the guys!

Rented a plotter for repairs. Fixed quickly and high quality. Thanks

We value your time, so we do free delivery. Regardless of the type of technology. whether you have a miniature gadget or a heavy large.format monoblock. delivery will remain free.

Do not worry about the safety of transportation: we all provided. We work through our own courier service. We can guarantee that our employees will carefully and responsibly react to your order.

We pack equipment before transportation according to the accepted standards. Wrap it in two or three layers of a special film (air-pussy) and pack it in a box.

This is a pleasant free bonus. All customers who ordered us to repair equipment, give diagnostic services.

We use specially purchased equipment and, thanks to the introduction of modern technologies into our daily work, can offer you the best conditions. maximum speed, accuracy and safety.

We comply with the mode of complete transparency and openness in relation to customers: the employees of the number of services will voice you the range of value. Due to the fact that different breakdowns have similar symptoms, the exact price will become known only after diagnosis. The manager will definitely call you and inform the conclusion of the engineer. And only after agreeing with you and the composition of work will we start repairing operations.

The nature of the breakdown affects the recovery period. So, if it concerns software (software, OS), the master will eliminate the failure on the same day, and you have at home. If this is mechanical damage, then the repair will take 1-2 days (in the service center).

Special express service-repair in 1-2 hours, on the same day.

The longest “rehabilitation period” has a flooded (drowned) technique. To the question “Why?»We answer:

First you need to completely disassemble the electronic model and dry the details in natural temperature conditions for 24 hours (t.e. without heating); Diagnosis reveals the level of damage: the presence of rust and the number of damaged elements. Light rusty raid toleham faster, and strong requires thorough processing in an ultrasonic bath; repair operations; Control testing. Total, restoration of flooded equipment will take 2-7 days.

We give a guarantee for repairs and the installed spare parts from 1 year to 3 years. Professional equipment and competence of specialists give us such an opportunity.

The experience of engineers of the service center has more than 5 years. They confirm the qualifications and pass exams for compliance with the profession according to accepted standards and GOSTs. Undergo training in authorized units of manufacturers of technology, which confirms numerous diplomas.

Only original. those that we purchase from official suppliers confirmed by manufacturers (Canon, Epson, HP, Brother, Panasonic, Samsung, Kyocera, Xerox, Oki, Roland, Mimaki, Konica Minolta). Bulk deliveries have been established, so that the price of the final repair is lower than the average in the market.

Store spare parts in our own warehouse, so we are sure that their quality will not change from the moment of delivery to direct installation.

Brother printer prints half a sheet

The most common reason for this failure in the work of All-in-One Printer is a shortage of toner. But, if it is enough, you should pay attention to the cartridge itself. Contacts and chip can fail, which will lead to uneven printing of the text and image. If the printer prints half of the sheet during scanning, it is likely that the scanner is faulty.

  • The All-in-One Printer scanner failed.
  • The contact group is clogged or damaged.
  • Cartridge chip is absent or faulty.
  • The powder ended in the toner cartridge.
  • Refun the cartridge.
  • Repair a scanner of a multifunctional device.
  • Replace the chip or put a new cartridge instead of damaged.
  • Clean or repair the contact group.

Leave us your phone number and our specialist will contact you within 10 minutes!

Leave us your phone number and our specialist will contact you within 10 minutes!

We are an authorized service center in Krasnodar, we offer repair of printers and plotters, as well as refueling cartridges. We carry out all types of work, from reinstalling software to replacing the main units of the device.

  • Repair on the day of circulation
  • The possibility of payment by p \ s
  • Warranty up to 3 years
  • Discounts for regular customers
  • Original components
  • Express delivery

I contacted the repair of Plotter, it was necessary to do very urgently since the work stopped, the guys helped very quickly! I recommend!

Great service! Plotter serves us. Always quickly and quickly eliminate problems. We also refuel cartridges from them. Thanks to the guys!

Rented a plotter for repairs. Fixed quickly and high quality. Thanks

Xerox 5855 Xerox 5955 Networking Complete Setup Fast Printing || wc 5855 Fast Printing ||

We value your time, so we do free delivery. Regardless of the type of technology. whether you have a miniature gadget or a heavy large.format monoblock. delivery will remain free.

Do not worry about the safety of transportation: we all provided. We work through our own courier service. We can guarantee that our employees will carefully and responsibly react to your order.

We pack equipment before transportation according to the accepted standards. Wrap it in two or three layers of a special film (air-pussy) and pack it in a box.

printer, brother, slowly, printing, solution

This is a pleasant free bonus. All customers who ordered us to repair equipment, give diagnostic services.

We use specially purchased equipment and, thanks to the introduction of modern technologies into our daily work, can offer you the best conditions. maximum speed, accuracy and safety.

We comply with the mode of complete transparency and openness in relation to customers: the employees of the number of services will voice you the range of value. Due to the fact that different breakdowns have similar symptoms, the exact price will become known only after diagnosis. The manager will definitely call you and inform the conclusion of the engineer. And only after agreeing with you and the composition of work will we start repairing operations.

The nature of the breakdown affects the recovery period. So, if it concerns software (software, OS), the master will eliminate the failure on the same day, and you have at home. If this is mechanical damage, then the repair will take 1-2 days (in the service center).

Special express service-repair in 1-2 hours, on the same day.

The longest “rehabilitation period” has a flooded (drowned) technique. To the question “Why?»We answer:

First you need to completely disassemble the electronic model and dry the details in natural temperature conditions for 24 hours (t.e. without heating); Diagnosis reveals the level of damage: the presence of rust and the number of damaged elements. Light rusty raid toleham faster, and strong requires thorough processing in an ultrasonic bath; repair operations; Control testing. Total, restoration of flooded equipment will take 2-7 days.

We give a guarantee for repairs and the installed spare parts from 1 year to 3 years. Professional equipment and competence of specialists give us such an opportunity.

The experience of engineers of the service center has more than 5 years. They confirm the qualifications and pass exams for compliance with the profession according to accepted standards and GOSTs. Undergo training in authorized units of manufacturers of technology, which confirms numerous diplomas.

Only original. those that we purchase from official suppliers confirmed by manufacturers (Canon, Epson, HP, Brother, Panasonic, Samsung, Kyocera, Xerox, Oki, Roland, Mimaki, Konica Minolta). Bulk deliveries have been established, so that the price of the final repair is lower than the average in the market.

Store spare parts in our own warehouse, so we are sure that their quality will not change from the moment of delivery to direct installation.

What you need to check and fix on a computer

“Ready” displays the green tick “Print Manager” “Printing Manager”

“Computer” “Computer Management” “Service and Appendix” “Service”

A list of Windows of a computer will appear on the right side of the window, in which services are displayed in alphabetical order. The list can be scrolled using the mouse wheel or moving the slider located to the right of the list. In the list you need to find a service with the name “Print Manager” or “Printing Manager” and look at its status. Opposite it, the “Launch type” column should be “automatically” or “auto” (see. the image below);

The basic diagnosis of the printer and the elimination of simple causes of malfunction.

Sending the seal to the wrong printer.

First of all, it is necessary to make sure that sending the seal is carried out on the same printer.

Before sending a print, make sure that the printer name corresponds to the printer on which you want to print a document.

Checking the printer connection.

There are situations that the printer power cable or a computer connection cable has departed.

All connectors for printers and All-in-One Printer are, as a rule. It is necessary to inspect the printer from the back and check:

  • Electric network connection wire
  • The wire providing joints with a computer-it can be a USB cable or cable for connecting to a common network with a RJ-45 connector

Each cable must also be checked from the other end. Is the power cable to the electric outlet, a USB cable to the computer, A connection cable to the common network to the RJ-45 outlet.

Examination of the printer display for errors.

Almost all modern printers and All-in-One Printer have a display with a service menu and error indication.

The error on the display can be shown with a clear description of the problem or as an error code. If the printer shows only an error code, then detailed information can only be found from the instructions for the printer. If there are no instructions on paper, then you can download on the official website of the printer manufacturer.

The most common notifications of errors on the display are associated with the butt of paper.

Papaque.

In case of such a problem as “Paper Purk”, the printer usually reports on the display or using notifications in Windows.

Elimination of Paper Purchasing.

Before extracting the stuck paper, the printer must be turned off.

Then you need to remove the cartridge and carefully inspect the place where the cartridge is placed. The discovered paper must be carefully removed so that it does not break. If the paper is torn, then you need to get all the remains of the paper.

There are models of All-in-One Printer and printers who can open the back cover. It also needs to be opened and check the remaining paper.

What can be done if the printer began to freeze

On the printers of the HP and Samsung brand (in several old model rows) I meet one rather popular glitch: when printing a large document, it can become so that the printer stops the print and freezes (without reacting to any user’s “usual” actions).

The fastest way to solve this. Just go to the list of services and restart the “Print Manager”. After that, the printer works as if nothing had happened (just at the next print, start it with the place where the printer hung).

  • click Winr keys combining. To make a “execute” window (or go to the task manager and click the “file/new task”);
  • Next, enter the Services command.MSC and press OK (an example below on the screen);

Open services. Services.MSC (universal method)

Clean the print queue

If you have “interrupted” the seal of a document, then when sending a new. it may become so that it will not be printed. The fact is that the printer “wants” first finish the work on the previous document and because of this does not proceed to the current.

A similar problem can be eliminated by cleaning the print line (this is a special. A list of documents that is formed before the seal. Even when sending one document. it is placed in the print line).

    First you need to open the tab: the control panel \ Equipment and sound / device and printers (to open the control panel: Press Winr; Enter the Control command and click Enter);

Winr. We open the control panel (Control)

Devices and printers. View the Printing Queen

Addition!

How to cancel the seal of the document on the printer: cleaning the print line. https: // ocomp.info/kak.otMenit-Pechat-na.printere.HTML

Solving the problem in the connection

But what to do if the reasons for the fact that the device “thinks” for a long time are associated with its connection with a personal computer or laptop? First of all, you should check the USB (if the connection is carried out using it). In this case, contacts can be clogged or a cable is damaged, especially if it reaches a length of 2-3 meters. At the first problem, it is necessary to turn off the contacts and clean them thoroughly, with the second. use another new cord, preferably a shorter and more thick. Also try connecting the device to another USB port-best at the back of the PC system unit. If all the recommendations described did not help and the print printer still slows down, then the problem is most likely in the computer.

If the connection between both devices was organized by means of Wi-Fi, then perhaps the printer is too far from the router. Therefore, put the device for printing as close to it as possible and try to print a few trial pages. But if it is better not to get from this, then the problem may be in the router itself. Reset its settings and set up again. Of course, the procedure is quite laborious, but perhaps it will be a real salvation for you.

Solving problems in the computer

To answer the question of why the printer prints slowly, check the correctness of all the settings of this device. To do this, go from the control panel to the “Equipment and Sound” tab, and then open “Devices and Printers”. Press the right mouse button on the icon of your printer or multifunctional device and select “Print Settings” there. There you should check the paper parameters and print quality. If in the latter case the “best” is established, then keep in mind that this parameter will certainly slow down the seal of documents somewhat. Also pay attention to the box next to the “quiet mode”. to reduce the noise level, the device usually reduces the speed of printing. If necessary, all the settings, making them “by default”.

So, if such a task as “slowly prints the printer” is still not solved, then you can increase the amount of memory RAM, t.e. RAM. Such an action should help accelerate the operation of your printing device. However, this method will only be effective if your printer uses the “RAM”. The number of models of printing devices using RAM to increase speed to date is a minimum. In addition, in most cases, we are talking about laser devices.

You can also completely remove the driver, and then download it from the official site and install it again. In addition, to solve the above problem, you can use special service utilities, for example, Canon Tool Box, HP Print and Scan Doctor and some others. Also scan PC for viruses and restore all damaged system files. Perhaps you have connected a device for printing to a weak PC. Retain and check it on a more modern computer.

BYRGPUB.COM 2023