Why iPhone doesn‘t see iPhone via AirDrop

It so happens that Airdrop does not see the device. Why can’t Airdrop see my iPhone? There may be 4 reasons for this:

  • The device does not have the function.
  • Wi-Fi and Bluetooth not activated.
  • Device visibility not configured.
  • The smartphone does not support file sharing.

AirDrop does not see iPhone: what to do

IPhone users use the AirDrop function to transfer files between smartphones, since there is no other way to exchange data. But in order to fully use the functionality of the gadget, you need to know how to enable, transfer and what to do if the Airdrop does not see the iPhone. These questions will be considered in the article.

How to enable AirDrop

We described in detail what an Airdrop is in a separate article. Depending on the phone model and the installed iOS, this procedure may differ, therefore, consider the instructions common to all models:

  • Go to phone settings.
  • Go to the “Basic” tab.
  • Looking for the AirDrop tab.
  • If it is not there, then go to the “Restrictions” and enable the function there.

After that, the icon will appear on the control panel next to wireless networks.

Solution of problems

If the iPhone does not see the iPhone via Airdrop, then you need to do the following:

  • Check on gadgets if the function is enabled. Also open the visibility, and put it on the “For all” mode.
  • Manually turn on Wi-Fi and Bluetooth. On versions of iOS 10 and older, they turn on automatically; on older versions, this must be done manually. To do this, go to the Settings = Bluetooth menu (similar to Wi-Fi) and activate the function.

Also make sure your smartphone supports the function. Note that iPhones below 5 and iPads up to the 4th generation cannot exchange data.

Also, if the iPhone Airdrop does not see the iPhone, watch out:

  • Airplane mode must be turned off. To do this, go to the menu “Settings” = “Airplane mode” and press the slider to activate this mode.
  • Disable Personal Hotspot mode if enabled. To do this, go to Settings = Modem mode and turn off this function.

Users are also wondering why the Airdrop does not see the contact. There may be several reasons for this, in particular:

  • The Apple ID is registered to a different number. Those. in your contacts, the user is saved with one phone number and email, and his ID is registered for other data, because AirDrop does not recognize the contact. In this case, it is better to turn on visibility for everyone and transfer data.
  • The user has no visibility activated. Those. he did not turn on Airdrop, or activated it for contacts, and you are not in it. Opening visibility for everyone will also help here.

AirDrop limitations

Along with the advantages, this system has disadvantages:

  • File sharing is only possible between Apple products.
  • Not all devices support the system.
  • Can’t send copyrighted files such as music.

But at the same time, the function is quite convenient, and all problems with it are easily solved.

The device has been jailbroken

In order to take advantage of the features of the mobile Apple device that Apple does not add, a smartphone jailbreak is often performed. In some cases, jailbreak does not allow, for example, iTools 3 to recognize the device.

The situation is corrected in the following way:

  • ITunes creates a backup.
  • The smartphone is restored to its original state.
  • The phone is connected to the computer.

These actions will allow the software to identify the Apple device. In this case, the jailbreak will not be damaged, since the owner of the smartphone can always recover using the created backup.

Solving the problem: iTools does not see the iPhone

A gradual study of all possible causes will help correct the current situation. As a result, the software product will be able to detect the iPhone.

System crash

If a system failure occurs, then such a problem may be the reason why the program does not detect the iOS phone. The situation is corrected with the help of an ordinary restart of the computer and the connected device:

iphone, doesn, another
  • on a laptop or desktop with Windows, the operating system icon is pressed in the lower left corner and the “Shutdown” button is selected, and then clicked on the “Restart” line;
  • on the phone, simultaneously pressing the “Power” and “Home” keys for 10 seconds.

Old version of iTunes loaded on PC

The iOS device will be detected if iTunes works correctly on the PC. When the media player has not been updated for a long time, then a failure in its functioning may occur. The situation is corrected as follows:

  • The software is launched.
  • Click “Help” located at the top of the window.
  • In the drop-down list, select the line “Updates”.

As a result of these actions, a check is made for an available software update. If it is found, then the system will prompt the user to perform the appropriate operation.

Old version of iTools loaded on PC

You need to update iTools regularly, since the software works in one bundle with the Apple media combine.

This process is carried out after the preliminary removal of the old version of the software product through the “Control Panel”.

  • The “Control Panel” opens.
  • Select “Small icons” in window view mode.
  • Pressed in the general list of the line “Programs and Features”.
  • In the window that opens, click on the name of the program to be removed.
  • A fresh version of the software is downloaded from the site https://www.thinkskysoft.com, by selecting the desired PC operating system (Mac or Windows).
  • The downloaded distribution is launched with a double click.

The activities carried out will help the software to see a mobile iOS device 5 s or another model.

iTools Can’t See iPhone

ITunes is a popular powerful media combine. However, he has a great alternative. this is the iTools app.

Despite the popularity of the program, in some cases iTools cannot see the iPhone. This situation does not allow using the software for its intended purpose. The nuisance is eliminated by gradually determining the cause of its occurrence.

Damaged USB cable

The iPhone 6 series or any other device often refuses to function if not original accessories are used. Therefore, you need to use a proprietary USB cable for work.

Otherwise, a power surge may occur. As a result, the phone will fail.

Malfunctioning drivers

Synchronization of a mobile device will occur if the driver, which is installed in the computer when the phone is connected, is not broken. However, what to do if such a failure occurs. In this case, the driver will have to be reinstalled in the following sequence:

  • Apple device connects to PC via USB cable.
  • Opens the “Device Manager” through the “Control Panel”.
  • The section “Portable devices” expands.
  • Click on “Apple iPhone”.
  • Select “Update Driver”.
  • A line is pressed that starts a search on the PC for drivers.
  • A key is clicked that allows you to select a driver from the available options on a PC.
  • The “Have Disk” button is pressed.
  • Click on “Browse”.
  • It navigates to a folder with a path like this C: \ Program Files \ Common Files \ Apple \ Mobile Device Support \ Drivers.
  • Selected two times “usbaapl”.
  • In the window with the name “Install from disk” click “OK”.
  • Click on the “Next” button to complete the operation.

At the end of the entire event, you need to open iTunes. This will check if iTools is functioning properly.

The above points are the main reasons why the Chinese program cannot detect the iPhone. Therefore, you need to check each of them to conveniently control your Apple phone with iTools.

Why the iPhone does not see the SIM card

One of the reasons may be a malfunction of the SIM reader. Determine if this is the case, or if there is another breakdown. only a qualified specialist can. In a big city, with many options, it is difficult to find a service center that suits you. The site lists the best organizations, among which you will find the most convenient location for you and the most affordable.

If the iPhone does not see the SIM card, then the device may be locked for a specific operator. Very often, in the case of Apple, it is beneficial for manufacturers that the phone works with some specific operator. This problem can be solved quite easily by unlocking, but such a procedure should be performed in a good service center, because “home” renovation can lead to serious consequences, which means additional costs in the future.

Don’t pull. Call!

When the iPhone does not see the SIM card, you need to start by diagnosing the device so that the wizard can identify and, therefore, fix the problem as soon as possible. It is always easier for a qualified specialist to find what the malfunction is, because he has already dealt with a broken SIM-reader mechanism or an unsuccessful firmware more than once. In order not to waste your time on the tedious search for a suitable service, we have posted on our website a list of proven service centers, among which you can always choose the most convenient one for you. After setting the necessary parameters of the price, location of the center, etc., you can select the desired service in a couple of clicks, call and get a preliminary consultation.

You can always also leave a request on the website by calling us at the hot mowing line number 8-800-100-39-13.

iPhone does not see the SIM card

If the iPhone 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR does not see the SIM card, without diagnosing the device get along. Whether the SIM card itself is out of order, whether the SIM-reader mechanism is faulty, or another error has occurred as a result of exposure to moisture or mechanical damage. can only a professional repair center.

Our resource provides the best services, and we will definitely check how quickly assistance was provided to you.

How much does it cost to replace the SIM-holder (mechanism) ?

Device Price onsite Price in service centers

iPhone 11 Price on request Price on request
iPhone 11 Pro Price on request Price on request
iPhone 11 Pro Max Price on request Price on request
iPhone 12 Price on request Price on request
iPhone 12 mini Price on request Price on request
iPhone 12 Pro Price on request Price on request
iPhone 12 Pro Max Price on request Price on request
iPhone 4 990 rbl. 990 rbl.
iPhone 4s 990 rbl. 990 rbl.
iPhone 5 1 190 rub. 1 190 rub.
iPhone 5c 1 190 rub. 1 190 rub.
iPhone 5s 1 190 rub. 1 190 rub.
iPhone 6 1 390 rbl. 1 390 rbl.
iPhone 6 Plus 1 390 rbl. 1 390 rbl.
iPhone 6s 1 390 rbl. 1 390 rbl.
iPhone 6s Plus RUB 1,590. RUB 1,590.
iPhone 7 1 990 rub. 1 990 rub.
iPhone 7 Plus 1 990 rub. 1 990 rub.
iPhone 8 RUB 2,490. RUB 2,490.
iPhone 8 Plus 2 690 rub. 2 690 rub.
iPhone SE 1 390 rbl. 1 390 rbl.
iPhone SE 2 Price on request Price on request
iPhone X 3 490 rbl. 3 490 rbl.
iPhone XR 4 490 rbl. 4 490 rbl.
iPhone XS 4,990 rbl. 4,990 rbl.
iPhone XS Max RUB 6,990. RUB 6,990.
READ  Find iPhone via icloud online from android

Moscow, st. Ordzhonikidze, house 11, building 1a, pom. XIII and fl. 2 off. 6m.

St. Petersburg, st. Professor Katchalov, house 11, letter A, floor 7, room. 20.

to improve the quality of service, your conversation can be recorded

repair time may vary depending on the model of the device and the complexity of the work carried out

Switching the system language from Russian to another language

You can switch the system language of the device from Russian to another and then restart the device. If iPhone returns to normal, change the language to Russian.

Headphones do not work on iPhone 11 Pro / 11 / XS / XR / X / 87/7 Plus / SE / 6s / 6, what to do ?

Owners of iOS devices face a variety of problems in the process of using their gadget. For example, after connecting headphones to an iOS device, the sound is heard from the speakers and not from the headphones, the iPhone does not see the headphones, or after the headphones are disconnected, the headphone volume indicator continues to be displayed on the iPhone when adjusting the volume. But, as a rule, they are all solvable, and in this article, we will provide several methods to fix iOS device headphone problems.

Clean the headphone jack. (Does not apply to Airpods)

Long-term use without proper maintenance can damage something as wonderful as the iPhone’s headphone jack. You need to clean the headphone jack regularly. You need to get the most ordinary toothpick, a piece of cotton wool and a little alcohol. You can also use a cotton swab.

Check your phone settings

Check the settings of your device and whether turn on the phone call function in automatic mode. If you haven’t enabled, skip to the Basic section. Universal access. Sound source. Automatically.

Reset all settings

How to turn off headphone mode on iPhone? If the above methods do not help you turn off the headphone mode on iPhone, you can reset all settings. Go to settings. Basic. Reset. Reset all settings. This method can fix other iPhone problems too, such as black screen on iPhone, iPhone not showing incoming calls.

IPhone / iPad or iPod Touch earphone stopped working, how to fix ?

How to turn off headphone mode on iPhone via utility

After restarting the system, the iPhone, iPad or iPod Touch still does not see the headphones. In this case, we recommend that you use the Tenorshare ReiBoot program, which is able to solve most of the iOS errors. With Tenorshare ReiBoot, your device will enter / exit recovery mode with all data saved, after which the error will be corrected. Detailed instructions for using the program are below:

  • Step 1 Download the Tenorshare ReiBoot program from the official resource, and then install it on your Mac or Windows. Please note that the program supports both platforms.
  • Step 2 Next, you need to connect your iPhone, iPad or iPod Touch to your computer using a USB cable. After connecting the device, run the program.

Step 3 Click on the active button “Enter recovery mode”. Wait for a while, the iTunes logo will light up on the display of the mobile device.

Step 4 Now click on the “Exit Recovery Mode” button.

Your device will be rebooted and ready to go. Then try connecting the headphones again and make sure the iPhone / iPad / iPod Touch recognizes them.

If the problem has not been resolved yet, Tenorshare ReiBoot software is available in standard and professional versions. You can use the Fix all iOS problems feature, which can fix most of the iOS errors. For example, iPhone keeps restarting, iPhone won’t turn on, etc.

Reboot smartphone

The first method that users resort to is to reboot the device. It has long been known that this procedure can solve three quarters of iPhone problems. The fact is that under active loads, the operating system starts to “glitch”, and the smartphone. to give errors. This is normal, rebooting the device and cleaning up unnecessary debris will quickly improve the situation. Users regularly complain about pop-up errors, but the masters say that they will have to put up with it and do not forget to restart the smartphone. Buying Android will not solve the problem. such errors occur even more often.

iphone, doesn, another

SIM card malfunction

If iPhone has stopped seeing the SIM card, the problem may be with that device. Take out the card and inspect carefully, the stripes and the metal base should not be damaged. Deep scratches, creases, signs of corrosion will indicate that the SIM card will have to be urgently replaced. Most often this happens if the phone has been in water. the device is not afraid of moisture, and the SIM contacts are oxidized. It is worth wiping with a cotton pad dipped in an alcoholic liquid. this helps with oxidation. But if the SIM card is not found by the smartphone, then you will have to pay a visit to the office of the mobile operator with a passport to restore the card.

Problems with firmware

Sometimes the answer to the question “why the iPhone does not read the SIM card” is an incorrect firmware update of the device. To remedy the situation, the smartphone should be rolled back to factory settings. For this:

  • open iTunes on your computer;
  • connect your smartphone with a cable to your computer;
  • when prompted to enter a password. enter;
  • select the defined device in the program;
  • press the “Restore” button, and then confirm your choice;
  • wait for the recovery to complete.

The smartphone will turn on, but all the information will have to be entered again. the iPhone will return to the state of the new device.

Obsolete SIM card

Another reason why the iPhone does not see the SIM card is the expiration of the life. Cards also do not last forever, over time they deteriorate. communication works worse, during calls you hear interference and scraps, and then the card simply stops working. In such cases, it will no longer be possible to help, you will have to change your SIM card. usually they do not even take money for such a service, it is only important to provide the owner’s passport. The procedure takes 15 minutes and does not require any additional steps. If necessary, a new card will be cut to fit the size of the SIM slot, the service will cost 150 rubles. Although new cards are often sold with plastic adapters to adjust the size.

Change SIM

The answer for those who are looking for why the iPhone does not read the SIM card and what to do in this case is to try changing the card in the device. Contact a friend who also has an iPhone with a working sim card and check if it will work in your device. Put your SIM card in another phone. if the card does not work, it will be replaced. If it works, then the problem is with the tray or the device itself. It is also worth contacting the mobile operator, sometimes the network disappears due to technical work on the mowing line.

SIM locked

Also, the iPhone does not see the SIM card if it is locked, that is, it is designed to work with the network of a certain operator. In this case, other networks will not be recognized / therefore it is worth buying only models marked “SIM-Free”. There are two ways to solve the problem with a locked SIM card:

  • use the R-SIM microchip (the method will lead to the loss of warranty, there are also problems with communication and Apple branded applications);
  • contact the operator for whose work the smartphone was created.

In the second case, you will have to be patient, but the unlocking will be “clean” and forever. It is also worth noting that you will have to pay several thousand rubles for the procedure. Only scammers perform such works quickly and cheaply.

Mechanical damage to the smartphone

Update operator settings

Most of the operator settings are loaded and installed automatically, but the update can also be installed manually. To do this, open the smartphone settings, go to the “General” tab, where you will select the “About this device” item. If an update is available for installation, a message will appear on the screen. Confirm your choice and wait for the installation to complete. The process takes a couple of minutes, you may need to restart your smartphone. It is imperative to update the settings, even if the SIM is working properly. the mobile network will work better and “cleaner”.

Airpods wireless headphones won’t connect

The operation of wireless headphones is in no way related to the presence of external connection ports. As the name suggests, the signal is transmitted remotely, in this case via a Bluetooth connection. Therefore, the cause of the malfunction may lie both in the headphones themselves and in the equipment of the phone.

Most often, the iPhone “does not see” Airpods due to a broken Bluetooth module (or antenna). This microcircuit is responsible for finding and pairing all devices available in the range. After the phone is dropped, hit, or liquid gets into it, the module may fail. It is worth noting that in this case, the iPhone will not see any Bluetooth devices (or the connection will be unstable). As in the previous paragraph, a faulty audio codec (absence of any sounds) may also be the cause. When updating the firmware, a software failure may occur, as a result of which the Bluetooth module will stop working correctly.

Apple wired headphones won’t connect

At the very beginning, let’s remember that all models up to the iPhone 7. smartphones had a built-in 3.5 audio jack (mini-jack). This is the standard headphone jack used by almost all portable equipment manufacturers. But, starting with the “seventh” model, the iPhone lost this connector, instead, EarPods began to be connected through a single and universal Lightning port. Therefore, the breakdowns of different iPhone models are different.

As a rule, the reason that the iPhone does not see wired headphones is a faulty connector. In the case of the 3.5 audio jack, it is often clogged with dust and dirt, foreign objects and various liquids get inside. This leads to corrosion of the socket itself, or of the internal contacts. The same breakdown factors apply to the Lightning port, with the only difference that in most cases it is not only the headphones that stop working. iPhone refuses to charge, does not connect to a computer, you need to constantly wiggle the plug in the connector to “catch” the desired position.

READ  Restore iPhone via iTunes in dfu mode

In addition to the problem with the connector, the cause may also be a breakdown of the audio codec (iPhone sound chip). In this case, the sound will disappear not only in the headphones, but also in the speakers. A separate category can be attributed to various software failures that do not happen very often. If the system update is unsuccessful, after a poor-quality repair or flashing of the smartphone, problems may arise with the detection and identification of the connected headphones.

Why iPhone doesn‘t see headphones?

This is not to say that the problem with connecting headphones is too common on Apple smartphones. But, nevertheless, from time to time, clients come to our Apple Pro service center (Moscow) with a complaint that their iPhone “does not see” the headphones.

In other words, the smartphone does not react in any way to the connection of headphones (wired and wireless), respectively, they do not work (no sound). Let’s look at the reasons for such a malfunction.

IPhone Diagnostics and Headphone Troubleshooting

There are many reasons why iPhone is unresponsive when headphones are plugged in. We have listed just a few, the most obvious ones. But professional diagnostics of a smartphone is indispensable. Come to our Apple Pro service for a specialist inspection of the gadget, after which the exact cause of the malfunction will be established. We will offer the best and most affordable iPhone repair options.

How to send a photo via AirDrop?

AirDrop photos from Photos on Mac

  • In the Photos app on your Mac, select the photos you want to share.
  • Click the Share button in the toolbar, then choose AirDrop. A window appears listing nearby AirDrop users.
  • Tap the name of the person you want to send the photos to, then tap Done.

How to transfer photos from iPhone to iPhone via iCloud?

On iPhone, iPad, or iPod touch: Go to Settings [your name] iCloud. Click “Photo”.On a Mac computer:

  • Open the Photos app and choose Photos from the menu bar.
  • Click “Settings”.
  • Go to the iCloud tab and select the storage usage option.

How to Transfer All Data from iPhone to iPhone?

To start transferring data from your old iPhone to your new one, click the Transfer from iPhone button. If using a cable connection, the transfer icon indicates that the devices are connected. You can also choose whether to transfer some settings from your old iPhone to your new one, such as Apple Pay and Siri.

How to Transfer Photos from Poppy to iPhone?

→ iCloud. To the right of the “Photos” item, click the “Options” button and in the pop-up window, check the box next to the “iCloud Music Library” item. Now on your Mac, just open the Photos app and drag and drop any photo into your collection, which will instantly appear on your iPhone in a few moments.

Why AirDrop doesn‘t see another iPhone?

To do this, open the control panel, hold your finger on the block with switches, hold down the AirDrop button and select the desired item. 5. Make sure AirDrop is not disabled under Screen Time. Go to Settings. Screen Time. Content & Privacy. Allowed Apps.

How to Transfer All Photos from iPhone to iPhone?

Answer: To transfer photos from iPhone to another iPhone, you can use iTunes sync, iCloud My Photo Stream, or cloud sync using third-party services such as Dropbox or Google Photos. You can download iTunes on the official website.

How to Transfer All Photos from iPhone to Icloud?

To upload your photos and videos to your iOS device, select Settings [Your Name] iCloud Photos and select Keep Originals. On a Mac, open the Photos menu, choose Photos Preferences, and then choose Upload Originals to This Mac.

Why AirDrop doesn‘t see another iPhone?

To do this, open the control panel, hold your finger on the block with switches, hold down the AirDrop button and select the desired item. 5. Make sure AirDrop is not disabled under Screen Time. Go to Settings. Screen Time. Content & Privacy. Allowed Apps.

How to stop sharing call history between two iPhones

How to connect iPhone to wireless headphones?

How to connect a speaker and other devices to iPhone via Bluetooth

  • Turn on Bluetooth on iPhone. It is better to do it in the settings (why. see item 2)
  • Under the switch there is a field “My devices”. find the column you need there.
  • If it is not there, check if Bluetooth is turned on on the accessory.
  • Select a column from the list and wait for the gadgets to pair
  • Voila!

How to connect an iPhone to a JBL speaker?

How to connect a speaker to an iPhone or iPad

  • Turn on your Bluetooth speaker and activate Bluetooth discovery mode (usually there is a dedicated button for this).
  • Open the Settings app on your iPhone or iPad.

Why does not he see the JBL column?

Sometimes the phone does not “see” the JBL speaker via Bluetooth due to the too long distance. It is necessary to sit as close as possible and try again to search. Also, there should be no other Bluetooth transmitters or other electronics between the speaker and the smartphone that can cause interference.

How to sync between iPad and iPhone?

The first way is to connect your iPhone and iPad to your computer with a cable and turn on the official iTunes app. The second method is about the possibility, which is how to sync iPhone and iPad using the iCloud cloud storage service.

Why iPhone can’t see headphones via Bluetooth?

Make sure the Bluetooth accessory and the iOS or iPadOS device are close to each other. Turn off and then turn on the Bluetooth accessory. Make sure the Bluetooth accessory is turned on and fully charged or connected to a power source. If the accessory uses batteries, check to see if they need to be replaced.

How to AirDrop from iPhone to iPhone?

  • Pull out the Control Center with a swipe. Pay attention to the section with Wi-Fi, Bluetooth, etc.
  • Press harder on this window If you do not have 3D Touch, then just hold down the window.
  • Open Settings. General. AirDrop.
  • Choose Only contacts or Everyone.

How to send a photo via AirDrop?

AirDrop photos from Photos on Mac

  • In the Photos app on your Mac, select the photos you want to share.
  • Click the Share button in the toolbar, then choose AirDrop. A window appears listing nearby AirDrop users.
  • Tap the name of the person you want to send the photos to, then tap Done.

Why AirDrop doesn‘t see another iPhone?

If you are faced with the fact that AirDrop does not see the iPhone, you need to check the smartphone settings. Disable tethering if enabled on your device. Airdrop is a function to exchange files between different Apple devices on the iOS 7 and higher platform.

How to enable AirDrop on iPhone?

To choose who can see your device and send you content using AirDrop: Go to the Settings menu and select General. Press AirDrop and then select the option you want.

How to pair two iPhones via Bluetooth?

Pairing your device with a Bluetooth accessory

  • On your device, go to the Bluetooth Settings menu and turn on Bluetooth.
  • Put the accessory in discoverable mode and wait for it to appear on the device’s screen.
  • To pair, tap the name of the accessory when it appears on the screen.

How to sync between iPad and iPhone?

Go to the Options menu. Click on the ‘Sync with this (iPhone or iPad) over Wi-Fi’ checkbox. Click on the Apply button and remove the device from the computer. Now that iTunes Wi-Fi is on, you can transfer files from one device to another without using a computer.

How to Transfer Data from iPhone to iPhone via Backup?

Sign in to iCloud with your Apple ID. Select a backup. Check the creation date and size of each and choose the version that suits you best. After that, the data transfer will start.

How to sync from iPhone to iPhone?

How to sync iPhone with another iPhone?

  • Go to “Settings” iCloud “Storage & Copies”.
  • Turn on Copy to iCloud.
  • Click “Create Copy”.
  • Wait for the backup to complete.

iPhone won’t connect to computer. Reason. PC

Yes, in most cases it is the cause of the connection problems. In order to exclude them, we perform the following actions:

  • First of all, we reboot both devices. So to speak, for prevention.
  • We try various USB ports and check, for example, with a USB flash drive, their performance. After all, one of them may burn out or simply not work.
  • We do not use adapters, splitters, extension cords and other devices for USB ports. We plug the cable directly into the system unit.
  • Updating iTunes. The ideal option would be to completely uninstall, and then install the most recent version from the Apple website.
  • Disable third-party software (antiviruses, firewalls). Do not forget to turn them on after checking!
  • The most radical step. reinstalling the operating system, will most likely help, but it will take time

If the iPhone cannot connect to another computer, then the matter is clearly in the device

What to do if iPhone fails to connect to computer?

Hey! But really. what to do? Run for a new phone? Hand over the phone for repair? Throw out the computer? The options, of course, are interesting and almost certainly effective, but too expensive 🙂

And you shouldn’t get so excited, because the problem with connecting the iPhone to the computer can almost always be solved without resorting to drastic measures.

We try to synchronize with him, if everything works out here, then

Why the computer can’t see the iPhone. The reason is the phone

No matter how reliable and stable Apple products are, they can also become the cause of connection hiccups.

Although most often, the owners of these devices are to blame, having brought them to such a state that it becomes surprising how they can still turn on, and not just synchronize. I got distracted by something 🙂

READ  How to make a blinking flashlight on iPhone

Returning to the topic, we try to follow these steps:

  • After connecting, unlock the phone, it is quite possible that you will see a pop-up window with the question: “Trust this computer?”. Without an affirmative answer, no synchronization will take place, only charging.
  • Change cable. Even if there is no visible damage, the wire may be defective. Or it is quite possible that it is not original. but in this case, it is possible to make the device work with an “unsupported” accessory.
  • Reset content and device settings. If you decide on such a desperate step, remember to back up your information (using iCloud or iTunes), otherwise you will lose all your data irrevocably.
  • Jailbreak, or rather the so-called tweaks installed with its help, can also contribute to synchronization problems.
  • Update software. It’s always helpful!
  • Clean the connector on the phone (possibly oxidized or dirty). Important! Clean very carefully, ideally entrust it to a professional. If you undertake to do it yourself, look for information on the Internet, otherwise you can aggravate the situation.
  • The last point we have is the saddest thing. the connector for charging and synchronization is broken or out of order. There is only one way. to the service center! If possible, contact only the official workshops listed on the company’s website.

By the way, there is another win-win option. contact Support Apple. And torture them with the question: “Why can’t my iPhone connect to my computer using USB?” Frankly, I haven’t tried it. but I think I won’t hear anything new from them, and the conversation will take a lot of time.

As you can see, in most cases, you can get by with “little blood” and troubleshoot at home.

The main thing is to be careful, consistent, take your time and check absolutely all possible reasons that can lead to connection problems.

We tried everything, but the situation has not changed for the better. the iPhone still does not connect to the computer? Be sure to write in the comments. we will try to figure it out and solve your problem all together!

Reset

A factory reset is an effective way to troubleshoot network connection problems. As we already found out, connection failures started a long time ago. The iPhone 4 did not see Wi-Fi, the story continued with the iPhone 5, 6 (they are not being updated at the moment). The latest versions have eliminated these problems. If you are the owner of previous models, then the reset operation will help.

Make sure to back up your data, otherwise it is almost impossible to recover information.

  • go to the menu;
  • find the item “Settings”;
  • select “Reset”;
  • click “Reset settings”;
  • wait until the end of the operation.

Module malfunctions

The hardware module connects to wireless networks. This detail is considered one of the most problematic in the iPhone. The problems started with the 4s model, where the smartphone did not see Wi-Fi. Usually, the malfunction manifested itself in the course of overheating, falling or getting moisture inside.

In this case, it is recommended to give the cell phone to a specialist, but if you have the appropriate skills, you can fix it yourself.

So, what to do if the iPhone does not see the network at home or any other Wi-Fi:

iphone, doesn, another
  • Turn off your smartphone and remove the case.
  • Unscrew the screws on the housing.
  • Remove the cover and unscrew the additional 4 bolts next to the camera.
  • Remove the unit and unscrew the screw from the antenna.
  • Use tweezers to pick up the latch and pull it out.
  • Take out the module and warm it up to 300 degrees. This can be done with a hair dryer.
  • Warm up the board. We do not recommend holding the hairdryer over it for a long time.
  • Wait for the device to cool down and put it back.

The solution to the problem is also relevant for the iPad, which does not see Wi-Fi. The same method can be used if it is necessary to replace a defective part with a new one.

Warming up is a dubious method. Even if you do not completely ruin the gadget, this method usually helps only for a while. Then the problem comes back.

Checking the operation of the router

Relevant if a router malfunction is found. Because of this, no device can connect to the internet via Wi-Fi. This can happen due to power surges or malfunction of some parts.

  • Try restarting your router. If the situation has not changed, then use the second option.
  • Go to your personal account and check the parameters of the router. Login to the settings is done through the browser at 192.168.1.1 (or another, which is indicated on the device itself). Enter your personal password and login from the “admin”. Check if the settings are correct.

If that doesn‘t work, then try connecting through another device, such as an iPad. And, if, when trying to connect, the iPad does not see Wi-Fi, then contact the repair service. This is an extreme measure. Maybe it’s time to change your router to a new one.

What to do if the iPhone does not catch Wi-Fi: we look for the reason and solve the problem

If the iPhone stops picking up the Wi-Fi signal, do not rush to take your smartphone to a service center. Any failures cause great inconvenience, but if you figure it out and find the reasons, you can fix the problem yourself. Today we will find out why the iPhone does not see the Wi-Fi network.

Causes of the problem and solutions

Why is iPhone not catching Wi-Fi? Experts identify several reasons why the gadget does not recognize the network:

  • The access password was entered incorrectly. This is one of the most common reasons. To fix, enter the code again.
  • The Wi-Fi wireless module is defective on the device. Try to diagnose yourself and restart your smartphone. If this does not help, then take the device to specialists.
  • The router has malfunctioned. Here you should try to reconnect to the wireless network. Reboot your router and connect.
  • The firmware version is incompatible with the device. Reset to factory settings or update software.
  • Malware has entered the system. Install antivirus software on your device and activate it when downloading each application.
  • The software can’t handle the loads. In this case, you can partially clear the memory.
  • Unpaid invoice for communication services from the provider. Check your balance and top up.
  • The parameters of the router are entered incorrectly. It is enough to reset the settings, enter them again and reboot the device.
  • Mechanical damage. Corrected depending on the complexity of the situation.

If the smartphone shows that the Wi-Fi network is available, but cannot connect to it, then the problem lies in the incorrect settings of the router. To fix, follow these steps:

  • reset all parameters and rename the access point;
  • change the security key;
  • try to connect again;
  • disable password entry;
  • try to connect again.

Mechanical damage can be avoided if you follow the basic rules for using your smartphone. If you ignore the problems, then because of them others may appear, the level of complexity of which will be impossible to predict.

A few more tips are described in the following

Additional ways to troubleshoot problems

Other troubleshooting methods that we will consider can be considered universal and provide answers to the questions that have arisen as to why the iPhone does not see the Wi-Fi network. Let’s analyze the most popular.

Additional Information

If a virus was detected on the device and no antivirus programs are helping, follow these steps:

  • Back up all account data.
  • Connect via iTunes to your computer.
  • Press the return and power button at the same time.
  • When a message about recovery appears in the application, click on the “Restore” button.
  • Select the file with the appropriate firmware version and wait for the installation.

If the iPhone is not looking for or cannot connect to Wi-Fi, you can independently identify the problem and solve it through self-diagnosis. This will save you time and money, because in most cases the breakdown can be repaired by yourself.

But, if after the performed manipulations your smartphone still cannot connect to the network, do not risk it and take it to a service center.

Be sure to tell us which method helped in your situation. If you know other solutions, share your experience. Comments and online chat are always open for our readers.!

Table of Contents