What to do if the iPad does not respond to touch

The most primitive “malfunction” is the use of iPad in gloves. In this case, the screen will not respond, since the principle of its action is specially configured to direct capacitive contact with the parts of the human body. But, I hope you are not so inattentive)).

Okay, jokes about gloves to the side, let’s move on to serious things.

A common and relatively harmless case is the freezing of the iPad operating system while using it. This is due to various factors, for example, such as:

  • careless treatment, which led to the mechanical destruction of the elements of the scheme;
  • downloading malicious software;
  • Failure elements of the power chain.

ALL iPADS: HOW TO FIX BLACK SCREEN / STUCK APPLE LOGO / BOOT LOOP / WON’T RESTART

To start

First, make a corny make sure that the battery is charged enough to work the tablet. So grab your iPad, the original Lighning cable and the wall-mounting of at least 1.5-2 A and a voltage of 5 volts (characteristics are written on the case in small letters). Only with such a current power can you “push” the battery. Back to the process after at least 30 minutes. If everything works, an apple will appear on the screen and iOS will boot, if it does not help, we read on.

You can try to charge the iPad by connecting it to a USB port on a stationary computer. On laptops, current strength is usually less than 1.5a, so do not try this option.

Be sure to inspect the wire for the presence of creases, bends, traces of pets from the teeth, and other obvious damage.

ipad, screen, does, react

Ideally, make sure that the available Lightning cables are certified by MFI. Usually in a local store or at a gas station, you can buy Chinese cables that are not certified by MFI, which are lower quality than the original.

They have thinner conductive veins, more brittle braid plastic, “crooked” chips are unscrewed, and so on. In rare cases, the use of Chinese “crafts” leads to damage to the internal electronic components of the device.

Usually iPad, iPod and iPhone warn of not certified or damaged cable, issuing the message “This accessory may not be supported”.

Try to turn on again

If you tried to charge the iPad, but it does not turn on automatically, try turning on it yourself.

Press and hold the power button (at the top) to enable the gadget.

After a few seconds, Apple logo should light up. This means that your tablet is launched and should be ready for work in a few seconds. If nothing happens, then follow the instructions further.

Forcibly reboot the device

Software failure is a common problem that happens with many users of the products of the American manufacturer of electronics. The best way to fix this is to carry out a forced restart (the people are called “hard reboot”).

Click and hold the “home” button and the “Nutrition” button (above) for at least 10 seconds until the Apple logo appears on the screen.

This method helps with freezing on the “apple”, with rigid systemic “glitches” and other situations when the tablet does not respond to keystrokes and touching the screen.

Inspect the connector on the case

Now it’s time to inspect the charging port. Take any flashlight and carefully inspect the Lightning connector. Look for dirt, garbage, fluff that can prevent the Lightning cable to install a direct connection with contacts.

Inside the connector is eight small metal contacts, with which charging occurs. While one of the contacts is stained, energy does not enter the battery.

Even if garbage is not visible, we recommend trying to clean the charging port with a cotton swab moistened in an alcohol solution. Tiny dust dust can block contacts and cause problems with charging.

Check output and cable

If, after manipulations, the iPad does not turn on, try to charge the gadget with another cable and charger.

Ask your parents, your brothers and sisters or any of your friends, can you lend them iPhone (or iPad) to try to charge them with your own lace and it. If your cable or power supply does not work with an “rented” iPad or iPhone, then you have already found a problem! You need to buy a new charging cable.

ipad, screen, does, react

Nevertheless, if you find that the wire works with their devices, although it does not work for you, this means that something is wrong with your device, and not with the cable for charging. Dig on.

We try to restore iOS

So if you read here, then the instructions given above do not work. Now it’s time to try to fix software errors. iOS, like other operating systems (Android, Windows) on the tablets “rush”. flies. Because of this, the iPad does not turn on (relevant for all models: 1.2.3.4, Air, Mini, Pro), the apple lights up or asks for connection to iTunes. If the iPad asks for iTunes, something happened to the activation, more about this here, in this article we are talking about something else.

There is a so-called DFU-mode that allows you to flan the gadget even in non-working state.

This is the deepest IOS restoration method. In the process, a new firmware is poured directly into the energy.dependent memory, restoring the initial state of the operating system. When you restore iOS using DFU, there is always a chance that something will go wrong.

ATTENTION! If the iPad is mechanically damaged, the screen is broken, there are obvious jams on the housing, or traces of water, DFU restoration will lead to complete loss of performance. Run to the service center, you can’t help here yourself.

  • Connect a USB cable to a computer and iPad. Make sure your iTunes is installed in the system on the computer.
  • Now press and hold the power button (at the top) for 3 seconds.
  • Continue to hold the power button, as well as press and hold the “home” button.
  • Hold both of these buttons for 10 seconds. If you see the Apple logo, then you have been lingered too long. Do not worry, just return to step 1 and try again.
  • Release the power button, but hold the “Home” button for 5 seconds. If you see the screen “Connect to iTunes”. You keep it again for too long. Return to step 1 and try again.
  • iTunes will find iPad and offer to restore iOS. All you need to do is just follow the instructions on the screen (this is just a few fast, simple steps).

The full procedure and step.by.step instruction is described in this article.

Causes

Strong mechanical effect

Most often, the touch display stops working after mechanical exposure from the outside, with inaccurate handling of the device. A strong shake or pressure can ruin the touchscreen, what can I say if it fell on the asphalt or tiles.

  • When the protective glass cracked, you can fix the LCD display yourself, just replacing it with a new. If the internal components of the monitor are touched, then do not try to fix it yourself. Better to entrust the repair to a professional.
  • If you dropped the device into the water, then before turning on, you need to dry it. If possible, disassemble the tablet (with cheap Android devices this will not be difficult, but IPAD should not be disassembled) and leave to dry for at least a day. Do not put a gadget on the battery, blow it with a hairdryer or place in the sun. In extreme cases, you can place it in rice for 3-4 days. Cereal absorbs excess moisture.
  • If you spilled on a tablet PC tea, coffee, lemonade or chemical (liquid for removing varnish, kerosene, gasoline and something similar)-urgently bring the tablet to clean the service center.

Brand models (Apple, Lenovo A3000 / A7600, Samsung Galaxy TAB / T555, ASUS Zenpad / Transformer TF300T, ASER A701, Sony, Hyway, Nexus, Oysters T72 / T72X) repair more expensive, but finding original spare parts quite easily. But getting elements to budget or little.known brands can be difficult. Before repair, we recommend asking how much it will cost. It is sometimes cheaper to buy a new gadget than to repair the old.

The train stepped away

How to understand what kind of breakdown occurred as a result of a fall:

  • Turn on the PC tablet in normal mode.
  • If there is no image and reaction to pressing, but there is a sound and/or the indicator is on fire. Perhaps the train flew out of the connector in the motherboard.
  • If the situation allows, remove the back cover and check if all the connectors are connected. A train from a matrix or touchscreen really carefully put in place with your own hands using a tweezer and a needle. Of course, if he did not break or did not break.

Contact oxidation

  • Strips and black spots began to appear;
  • Sensitivity in the corners or in the center disappeared;
  • The touchpad does not respond to pressing;
  • Single luminous pixels appeared

So, the oxidation of contacts occurred. In this case, cleaning can help with a special liquid or simple alcohol. You need to act very carefully. You can use a toothbrush or drawing brush with artificial bristles.

In Chinese smartphones (IGMA PLANE 1550S / 7535E / 8584S / 7006, Prestigio Grace 3157 / Viscount V, Irbis TZ86, Navitel T700) Oxidation often occurs without contact with water, and due to poor quality processing and low quality of the components.

Microsene on the glass

The tablet display consists of three components:

  • Protective glass with oleophobic or other coating;
  • Capacitive or resistive (outdated) sensor (Touch Screen);
  • Liquid crystal matrix with a backlight panel;

If you sat down, have come or dropped the tablet, then after an unsuccessful fall, pressure or blow in the steel, microcracks can form:

  • Everything works. only protective glass is subject to replacement. This is the simplest and cheapest version of the damage.
  • The image is displayed completely, and Touch Screen reacts only to half, from below, from above, from the side or does not work at all. the entire module is replaced;
  • If only the half-lubricants of the LCD or the image are completely disappeared-the matrix is ​​damaged. It is necessary to replace the screen.

Program problems

The loss of sensor sensitivity can occur due to a programmatic error caused:

My iPad Won’t Turn On! Here’s The Real Fix.

  • Uploaded applications, due to which a failure in the operating system occurs. If you have Windows OS, download the gadget in safe mode and check the sensitivity. If the activities of Touch Screen have resumed, then the violation is caused by previously loaded software, and you need to remove it. Or reset to factory settings.
  • Attack with viruses. Connect the tablet to a PC or laptop and conduct a full check using the antivirus. Do not neglect these programs, do not disconnect, and even more so do not remove from the tablet. They are the key to your safe work on the Internet.
  • Overheating of the processor and other modules can also be the cause of a temporary violation of the monitor response. First of all, budget models suffer from this (Digma PLANE 8548S / 1503, Digma Optima, Prestigio Multipad WIZE 3038 /3797 /3131, 4GOOD T700I 7 3G, URSUS VS210 / TSP 310, X-Pad Navi Texett, Supra, Expert, Irbis TZ11, Philips, LG G Pad 8.3 v500, megaphone Login 2, Bravis NB102, BQ 7021G / 70222G). If the problem occurs regularly. contact the service center.

Independent replacement

If the display of your tablet has stopped functioning due to cracks and dents on the monitor. We recommend that you give it to a specialized center for diagnosis and repair as soon as possible. If you tighten it with this, the matrix may be damaged, and the repair with a complete replacement will cost you much more. This is especially true for eminent brands (Huawei Mediapad 10 Link, Sony Xperia Tablet Z2, ASUS T100TA / TF701T / Transformer, Lenovo A7600, Oysters T104W, Samsung Galaxy Tab 2 / N8000, BG-1081 G 3G, Acer Iconia TB). over, it is not worth doing this on Apple iPad, because this manufacturer provided protection against interventions to the structure and the introduction of third.party elements from the outside.

Change of broken screen requires certain skills. Will correctly entrust it to professionals in order to avoid even greater damage to the internal components of the device.

The iPad freezes. What to do?

I have such a problem only once. the iPad hung and I did not know what to do. Therefore, I write detailed instructions, what to do if the iPad freezes.

So, your iPad does not respond to the keystrokes and touching the touch screen, or the iPad does not go home to the screen or does not leave the sleep mode, does not turn off. These and many more such problems relate to freezing problems.

iPad freezes. what to do? Instructions

Problem 1. If one program stops reacting to actions or hangs, try to close it forcibly, performing the following actions.

Click and hold the closed “sleep/awakening” button until a red runner appears. After its appearance, release the “sleep mode/awakening” button. 2. Do not try to drag a red runner, instead press and hold the “home” button for six seconds. 3. If the device does not go to the “home” screen, see. Re.loading procedure described below.

Problem 2. If the iPad does not respond to actions, or if certain control functions do not work properly, try to restart the device by performing the following actions.

In order to turn off the device, press and hold the “sleep/awakening” button until a red runner appears. 2. Small the finger on this slider to turn off the iPad. 3. To turn on the iPad, press and hold the closed “sleep/awakening mode” button until the Apple logo appears.

Problem 3. If the iPad does not respond to actions, but there is an image on the screen, try to drop the device. one. At the same time, press and hold the buttons “Sleep/Awakening” and “Home” for at least ten seconds.

Problem 4. If the image on the iPad screen is absent, make sure that the battery is quite charged to turn on the device. one. Connect the iPad to the USB power adapter with a capacity of 10 W using a cable from the dock to the port of USB. 2. Charge the iPad for at least 10 minutes, then try to run it. 3. If the red battery icon is displayed on the screen, continue to charge the device until it is possible to start it normal.

If the actions described above did not help solve the problem (the image on the screen is still absent or the Apple logo is constantly displayed), try to restore it using the iTunes program. one. Connect the iPad to the computer and open itunes. 2. If the iPad device is displayed in the iTunes program, select it and click “Restore” on the “Overview” panel. 3. If the iPad device is not displayed in the iTunes program, try to force the iPad to restore the IPAD.

The iPad freezes. What to do?

I have such a problem only once. the iPad hung and I did not know what to do. Therefore, I write detailed instructions, what to do if the iPad freezes.

So, your iPad does not respond to the keystrokes and touching the touch screen, or the iPad does not go home to the screen or does not leave the sleep mode, does not turn off. These and many more such problems relate to freezing problems.

iPad freezes. what to do? Instructions

Problem 1. If one program stops reacting to actions or hangs, try to close it forcibly, performing the following actions.

Click and hold the closed “sleep/awakening” button until a red runner appears. After its appearance, release the “sleep mode/awakening” button. 2. Do not try to drag a red runner, instead press and hold the “home” button for six seconds. 3. If the device does not go to the “home” screen, see. Re.loading procedure described below.

Problem 2. If the iPad does not respond to actions, or if certain control functions do not work properly, try to restart the device by performing the following actions.

In order to turn off the device, press and hold the “sleep/awakening” button until a red runner appears. 2. Small the finger on this slider to turn off the iPad. 3. To turn on the iPad, press and hold the closed “sleep/awakening mode” button until the Apple logo appears.

Problem 3. If the iPad does not respond to actions, but there is an image on the screen, try to drop the device. one. At the same time, press and hold the buttons “Sleep/Awakening” and “Home” for at least ten seconds.

Problem 4. If the image on the iPad screen is absent, make sure that the battery is quite charged to turn on the device. one. Connect the iPad to the USB power adapter with a capacity of 10 W using a cable from the dock to the port of USB. 2. Charge the iPad for at least 10 minutes, then try to run it. 3. If the red battery icon is displayed on the screen, continue to charge the device until it is possible to start it normal.

If the actions described above did not help solve the problem (the image on the screen is still absent or the Apple logo is constantly displayed), try to restore it using the iTunes program. one. Connect the iPad to the computer and open itunes. 2. If the iPad device is displayed in the iTunes program, select it and click “Restore” on the “Overview” panel. 3. If the iPad device is not displayed in the iTunes program, try to force the iPad to restore the IPAD.

The iPad freezes. What to do?

I have such a problem only once. the iPad hung and I did not know what to do. Therefore, I write detailed instructions, what to do if the iPad freezes.

So, your iPad does not respond to the keystrokes and touching the touch screen, or the iPad does not go home to the screen or does not leave the sleep mode, does not turn off. These and many more such problems relate to freezing problems.

iPad freezes. what to do? Instructions

ipad, screen, does, react

Problem 1. If one program stops reacting to actions or hangs, try to close it forcibly, performing the following actions.

Click and hold the closed “sleep/awakening” button until a red runner appears. After its appearance, release the “sleep mode/awakening” button. 2. Do not try to drag a red runner, instead press and hold the “home” button for six seconds. 3. If the device does not go to the “home” screen, see. Re.loading procedure described below.

Problem 2. If the iPad does not respond to actions, or if certain control functions do not work properly, try to restart the device by performing the following actions.

In order to turn off the device, press and hold the “sleep/awakening” button until a red runner appears. 2. Small the finger on this slider to turn off the iPad. 3. To turn on the iPad, press and hold the closed “sleep/awakening mode” button until the Apple logo appears.

Problem 3. If the iPad does not respond to actions, but there is an image on the screen, try to drop the device. one. At the same time, press and hold the buttons “Sleep/Awakening” and “Home” for at least ten seconds.

Problem 4. If the image on the iPad screen is absent, make sure that the battery is quite charged to turn on the device. one. Connect the iPad to the USB power adapter with a capacity of 10 W using a cable from the dock to the port of USB. 2. Charge the iPad for at least 10 minutes, then try to run it. 3. If the red battery icon is displayed on the screen, continue to charge the device until it is possible to start it normal.

If the actions described above did not help solve the problem (the image on the screen is still absent or the Apple logo is constantly displayed), try to restore it using the iTunes program. one. Connect the iPad to the computer and open itunes. 2. If the iPad device is displayed in the iTunes program, select it and click “Restore” on the “Overview” panel. 3. If the iPad device is not displayed in the iTunes program, try to force the iPad to restore the IPAD.

Now you know what to do if your iPad freezes.

Restart iPad with the “Home” button

The old tablet models, for example, the iPad Pro have a “home” key, with which they can be forcibly restarting.

To reboot the iPad with the “home” button, you need to do the following:

  • Set the keys “Home” and “Nutrition” simultaneously.
  • Keep them for several seconds before the appearance of the “apple” icon.
  • Release the keys and wait until the iOS operating system loads.

Reloading the device usually helps, even if the screen does not respond to touch.

If it does not help

The most sad and, unfortunately, a common reason. Due to the fact that the surface of the iPhone screen occupies almost half of the area of ​​the device, it reacts not only to touching it, but also affecting physical factors: scratches, pressure, blows, etc.

Even if a preliminary visual inspection for crack or chips did not give anything, there is always the possibility of moisture entering the body. In the case of no urgent repair measures, this will lead to the oxidation of the loop contacts, the closure of the contact paths and the failure of the electronics.

ipad, screen, does, react

If software methods could not achieve the reaction of the screen reaction. give the iPhone to repair to the service center.

So, I hope now your gadget reacts to all your touches. Do not forget to leave the comment.

BYRGPUB.COM 2022