iPhone VS Smartphones

How does an iPhone differ from a smartphone? This is a typical question of most people who do not know which device for next-generation communication they should choose.

Quite often these devices are confused as they have many similarities.

Similarities of both species to each other

But why are these devices so often confused with each other, if they even differ in appearance? Consider now the general features that in any case will be characteristic of both the cheapest iPhone and a smartphone equipped with many additional functions.

Both devices support the standard minimum mobile phone functions (calls and SMS), as well as access to e-mail, a navigator for locating the location and the route to follow. There is a Wi-Fi module, a function for sending voice messages and the ability to attach various documents to messages.

Both iPhones and smartphones have a large touchscreen. The display is necessarily color, with a fairly bright and clear image, which cannot be said about most simple mobile phones. As for the keys, they are all touch sensitive.

But the standard exit key to the main menu is non-touch, it is available on both types of devices. Volume and lock controls are located on the side or top panels, which largely depends on the model of the device.

Both types of devices allow you to store a lot of data. You can upload music, photos, pictures, documents and even programs to devices!

The memory can be either built-in or additional, depending on the specific type and model of the device. At the same time, both types of devices are perfectly synchronized with the computer, which allows you to transfer data without problems.

On these devices, you can play at any time, listen to music, view and edit photos, watch videos. You can even download modern online games or photo viewers. The devices can also support applications that are not available for ordinary mobile phones.

Smartphones and iPhones

First you need to figure out what the iPhone is and what is the smartphone. These communication devices are considered much cooler than ordinary mobile phones, as they have a huge range of additional functions. over, many of these functions have absolutely nothing to do with communications.

Smartphones are usually called mobile devices that simultaneously combine the functions of mobile phones and personal computers.

Such a device has a large touch screen, it must necessarily have a built-in Wi-Fi module, which provides access to the Internet at any time.

Complicated smartphones are called iPhones, but only from Apple. As a rule, they are all produced by the same brands that make ordinary mobile phones, which cannot be said about iPhones.

Usually, the iPhone has the iOS operating system. Also, these devices have a lot more functions. Plus, they have a slightly different external design and menu features.

How iPhones differ from smartphones

And now with regard to the differences directly.

In fact, there are a lot of them, although in most models they do not affect the main technical characteristics in any way. There are several main differences by which you can immediately distinguish even the most expensive smartphone from the iPhone.

Let’s consider them in more detail:

  • The main difference is that the iPhone was originally designed as a mini-computer, so it is impossible to find such a device from a mobile phone manufacturer. As far as smartphones are concerned, they may well be called “highly evolved mobile phones.” Therefore, their manufacturers are usually the same as those of mobile phones. But only here there are only the most popular brands. That is why any iPhone, even the cheapest one, cannot have any analogues and competitors, since it has only one real manufacturer.
  • Usually smartphones do not have a slot for a memory card; there is already enough GB of memory built in, which allows you to store not only some of your personal files, but also complex software. If we are talking about smartphones, then only the most expensive models have a lot of built-in memory. In addition to the rest, you should buy a memory card separately, which is rarely sold with the device. For many people, this is a certain inconvenience.
  • Smartphones, depending on the model and manufacturer, can use a wide variety of operating systems. Of course, the most common and reliable devices are considered to be running on “Android”. But if we are talking about the iPhone, then it uses a novelty. a unique operating system iOS, which is made exclusively for Apple.
  • For iPhones, cases are always made in one piece, but at the same time they are supplied with non-removable batteries. This allows you not to worry about the integrity of the device, since the material for the case is used of the highest quality and durable. But it will not be possible to change the battery in case of failure. In smartphones, cases are disassembled, and the battery can always be inserted into a new one.

The main subtleties were considered, how the iPhone differs from the smartphone. Of course, do not forget that the price of iPhones is much higher than even the most expensive smartphones. There is a large overpayment for the brand when it comes to the original, not a fake.

The main thing is not to fall for a fake and buy only the products of the real manufacturer. Then even the most inexpensive device of any popular company will faithfully serve for many years without any problems.

iPhone XR vs iPhone XS vs iPhone XS Max. camera

Apple has paid quite a lot of attention to cameras in new phones, so new models have received slightly redesigned shooters. The iPhone XS and XS Max have dual 12MP cameras on the back. One is f / 1.8 main sensor and the other is f / 2.4 wide-angle sensor. Both cameras are equipped with optical stabilization.

The iPhone XR’s camera is the same as the iPhone XS, but it’s a one-shooter smartphone.

All three phones have Smart HDR mode for improved highlights and shadows, as well as improved front-facing cameras with a faster sensor and the ability to shoot in portrait mode with variable depth effects.

iPhone XR vs iPhone XS vs iPhone XS Max: features and functions

All new iPhones are equipped with an A12 processor, so the performance should be the same plus / minus across all models. However, in the future, we will have to properly test and use each of these new phones to really appreciate how they perform in comparison. But this is not yet possible, because, as of September 2018, these phones are not yet available.

Apple is playing with new models around the amount of RAM inside each phone. Insiders and experts suggest that the XS and XS Max will carry 4GB of RAM, while the iPhone XR will have 3GB. Again, we will only confirm this data upon reviewing each smartphone.

Storage size is another difference between the iPhone XS and iPhone XR. The XS and XS Max are available in 64GB, 256GB, and 512GB variants, while the iPhone XR is available in 64GB, 128GB, and 256GB variants.

Perhaps the biggest difference between XR and XS is the display. The iPhone XR comes with a 6.1-inch Liquid Retina LCD panel, while the XS uses Super Retina OLED technology. It is also available in two diagonals: 5.8 “and 6.5”.

We can’t say for sure without doing detailed testing of the phones, but we go out of our experience and argue that OLED panels will look noticeably better. Compared to cheaper displays, OLED displays have brighter colors and better contrast. HDR content should also look great thanks to OLED’s ability to display perfect blacks.

iOS 12 will run on all new iPhones, bringing features like Screen Time, improved notifications and making a serious Accent on speed and performance.

What’s the Difference Between iPhone XS, XR, XS Max

A couple of days ago, Apple announced a number of new products at its annual September announcement (which, incidentally, became the most boring in the company’s history). At the event, we saw the debut of products such as the Apple Watch 4, iPhone XS, iPhone XS Max and iPhone XR.

The iPhone XR sits at the bottom of a new range of smartphones, offering a similar design to the XS at a more affordable price point. However, it is still far from cheap Android models. Starting at 800, it costs more than last year’s iPhone 8!

The iPhone XS and XS Max are intended to be heirs to last year’s unique iPhone X in 2018 and are at the top of the smartphone range. The XS is nearly identical to the X with a 5.8-inch display, and the XS Max is the next-gen Plus variant with a 6.5-inch bezel never seen before in an iPhone. Now that we have a complete breakdown of these most coveted smartphones for next year, let’s see how the new iPhones compare, both internally and externally. So, if you want to know the difference between the new iPhones, then we offer you our new material.!

iPhone XR vs iPhone XS vs iPhone XS Max. design

All new Apple phones mimic last year’s iconic iPhone X design, which means all three have an equally large display with iconic bangs.

Neither model has a Touch ID fingerprint sensor, instead relying solely on Face ID to unlock and access locked apps and user data. This means that the company has taken a clear position on how to unlock the smartphone. Namely, now all iPhones will be unlocked using the user’s face. We will be able to see how normal Face ID will work after thorough testing of each new model.

difference, iphones

Other similarities include glass sides, support for Qi wireless charging, and an IP67 rating for water resistance. Nice to see Apple support these features across all new phones in the new lineup.

However, there are some big differences between devices that can affect their popularity. The iPhone XR is the brighter of the new phones, offering a range of body colors including blue, black, white, coral, yellow, and red. If you choose between the iPhone XS or iPhone XS Max, then the color options are limited to silver, gray, or gold.

Telephones are also built from different materials. The iPhone XR has aluminum sides, while the iPhone XS and XS Max use stainless steel. Stainless steel is slightly harder and has a more premium look.

None of the three phones have a headphone jack. Overall, in 2018 this is no longer surprising for flagship smartphones. But here the company prepared an unpleasant surprise for the buyers. It is likely that you will no longer find a 3.5 mm adapter in the box and you will have to buy it separately.

iPhone XR vs iPhone XS vs iPhone XS Max. price

The iPhone XR starts at 749 for the 64GB version. The 128GB version will set you back 799, while the 256GB version will start at 899. It is clear that this is the official price and in our country the will definitely be overstated

The iPhone XS will start at 999 for the 5.8-inch version. For the initial version of the iPhone XS Max will cost from 1,099.

Difference between iPhone and Android

The Internet war between the owners of i-gadgets and the owners of devices without an apple on the case keeps the traffic steadily. The debate about how the iPhone differs from the android flares up again with each new release from Apple, and each participant diligently proves why the inhabitant of his is better than the other. Reminders that one is an operating system for mobile devices, and the other is a whole family of “apple” smartphones, are most often ignored, and in common parlance we have an iPhone and we have Android. Let’s stop on that.

iPhone (iPhone correctly) is a smartphone developed, created and released by Apple, running the proprietary iOS operating system. Symbol. a bitten apple (corporation logo).

READ  How to disassemble Sony TV remote control bravia

iPhone

Android (in our case) is a smartphone of any manufacturer running the Android operating system. Symbol. funny green robot.

Android

Holivars on the topic often boil down to mentioning the high cost of i-smartphones and the capabilities that do not correspond to it. Why shouldn’t this difference between the iPhone and the Android be taken into account today? Firstly, the in the homeland of gadgets as a percentage of salaries are very democratic, and the iPhone in the United States is not a sign of belonging to the elite, but just a convenient tool. In addition, Apple is loyal to its customers, giving them significant discounts when switching to a newer model, and devices tied to operators and tariffs can be considered almost budgetary. Secondly, the flagships of other manufacturers running on Android are also not worth three broken kopecks, sometimes not representing anything remarkable. In a word, the problem of social inequality and overpayments does not exist everywhere, and the price cannot be a criterion when comparing not specific models, but entire classes of devices.

Comparison

There are a lot of smartphones on Android. Manufacturers are divided into echelons, their products are divided into lines. iPhone. one in several generations (6 and 6 Plus are relevant today), their design differs minimally, only the details and dimensions vary. Android phones provide a much wider choice to suit a variety of tastes.

iPhone of any generation is made with the highest quality, like any Apple product. Focusing on one model allows developers to debug the interaction of a hardware platform based on a proprietary processor and their own software, which is constantly being improved (or rather, Cupertino thinks so). Android is a universal system, easily portable, and manufacturers can change it according to their own ideas about the user experience. A thorough check of the OS for compatibility with hardware under these conditions is impossible. Adequate technical support is also impossible: Apple has the same support, and Android owners are forced to contact different manufacturers. And it’s not a fact that they will answer and help.

The creators of iPhones believe they know everything about the needs of their users. Therefore, their brainchild does not need customization, additional improvements, modifications and bells and whistles. the client is relieved of the need to put his hands on something. Those, in whose smartphones the green robot lives, constantly adjust something for themselves, change, improve, expanding the functionality to incredible.

iPhone is as authentic as possible. He needs accessories created by Apple or with its permission, often surprisingly expensive, he does not want to interact with gadgets without an apple on the case. To connect to a computer and charge, he needs a cable with an 8-pin connector, and only photos will be available on the PC. Android easily turns a smartphone into a USB flash drive (and in the presence of memory cards. and into two), its file system is completely open. The cable for almost any model is universal. micro USB allows you to hang peripherals, transfer data, and charge or charge.

For those looking for what is the difference between an iPhone and an Android, one of the most killer arguments sounds like this: the latter has better cameras and you can insert a memory card. And this is really true: many people want to get a universal device for their money, combining the capabilities of a camera and data storage. Apple has not yet risen above 12 megapixels, but 23 megapixels are taking root in smartphones on Android (this pleases Sony). You can expand the storage memory in them using SD cards of any size, and if the iPhone offers its 16 or 64 GB, then this cannot be changed. True, the latest models for additional figures in the price tags demonstrate 128 GB, and this is quite enough (although Huawei, for example, does not think so, leaving the card reader in its Mate S to the same capacity).

The performance of iPhones remains relatively high due to iOS optimizations for pre-known hardware. The system itself takes up little memory space and does not require a lot of resources. But Android is very, very gluttonous due to open source and the inability to adapt it to a huge number of different platforms. Therefore, manufacturers of android phones are forced to increase capacities in order to meet the needs of programs.

This affects autonomy. With the same battery capacity, any iPhone lasts longer than any Android, but 1810 mAh batteries (like the iPhone 6) are only used in the most budget smartphones today. With a battery with a capacity of more than 3000 mAh, acceptable for five-inch gadgets, fans of the robot can move away from the outlet for several days with average activity. The “apple” device survives only until the evening (however, a budget rival sometimes asks for recharging already at lunchtime).

Difference between iPhone and phone

Usually, the question of what an iPhone is and how it differs from a phone comes up when comparing in a storefront. Those who have so far made do with a mobile handset used as a “simple dialer” are sincerely perplexed as to why they are being asked to overpay. In addition, confusion in terminology gives the same effect: smartphone, telephone, iPhone, communicator, plus clones and replicas that have the appearance of some and the functionality of others (usually phones). If you, due to lack of interest in mobile technologies, do not see the difference between iPhone and phone, we will demonstrate it.

Mobile phone is a portable wireless device designed for voice communication and operating in radio networks of a certain range and standard. Runs a proprietary operating system with very limited functionality created by the manufacturer.

iPhone (iPhone) is a smartphone created by Apple that runs on the iOS operating system and has a number of unique characteristics. Considered one of the most popular mobile devices today.

As you can see, the difference is already in the definition. Both the phone and the smartphone belong to the same type of device, but to different classes. The phone software is not a full-fledged operating system, does not support functional expansion, and ensures the minimum number of tasks. The iPhone has a full-fledged operating system, which is not inferior in functionality to computer systems, and it is designed to solve many problems, including providing voice communication and other functions of a mobile phone.

iPhone 5S

Despite attempts by developers to make their devices unique, most modern phones and smartphones look similar, except for the details. However, it should be noted that today mobile phones are sometimes produced in slider form factors, keyboards, without a touchscreen. The iPhone is stable in any reincarnation: a touch screen, no keyboard. Almost all mobile phones have a removable and replaceable battery, while the iPhone does not have access to the battery.

iPhone is designed to solve a wide spectrum of multimedia tasks: watching video, playing audio, playing games and surfing the Internet. The phone is limited to displaying pictures of certain formats, a standard player, games and applications developed for the Java platform. Applications installed on the phone must strictly correspond to the hardware component of a specific model from a specific manufacturer. The phone’s customization options are limited by changing the background, screensaver and signal, while the iPhone, thanks to the ability to use extensions, is much more configurable.

As a rule, phones, if they do not belong to the VIP category, are made of cheap materials and inexpensive components, which, accordingly, affects their cost. When creating iPhone, innovative materials are used (for each model. different), for example, new high-resolution screen matrices, tempered glass, aluminum alloy.

Due to its low functionality and limited hardware resources, the phone lives on a single battery charge much longer than the iPhone. Some models from the budget niche are able to hold out without recharging for more than a week, while the average life of an iPhone is a day, rarely more, with the same intensive use and operating mode only as a phone.

And the last thing is the price. True, more often than not, we are not talking about choosing between an iPhone and a phone: too different devices with too different tasks. Phones today are much cheaper than iPhones (the only exception is an exclusive), so those who only need to receive calls and send SMS-messages from the device in their. and the functionality of a computer will not be in demand, will have the opportunity to save the budget tenfold.

Mobile phone

A mobile phone is a portable device through which voice messages are transmitted. Of course, there are other additional functions in the phone, for example, the phone book, call log, clock, alarm clock, calendar and others. There are also options for sending SMS and MMS messages. Modern mobile phones are equipped with cameras capable of taking photos and videos. These are useful functions, but still their list is limited to a narrow range on a mobile phone, unlike an iPhone. There is also an advantage: the phone is less prone to external damage.

Smartphone and iPhone: finding the difference

The phone and the iPhone are two very popular communication devices. The difference between a phone and an iPhone is primarily in their price points. The owners of mobile phones know that their main function is to maintain communication and transfer information, this is enough for them and they do not understand at all why they should pay astronomical sums for a “dialer”. In order to understand whether such a high cost is justified, it is worth considering the main characteristics of the two listed devices.

iPhone

This type of smartphone was developed by Apple and today its popularity is wider than any other. Analyzing how the iPhone differs from the smartphone, perhaps, first of all, it should be noted that the iPhone is based on the use of the iOS operating system. That is, unlike a phone, the iPhone is equipped with a full-fledged operating system that can be compared with computer systems, and has a wide range of capabilities and ease of use. The iPhone battery cannot be removed. The latest models are characterized by the presence of a solid body, which contributes to increased resistance to damage. Memory cards are not supported by iPhones, since the built-in memory has impressive volumes.

Smartphone

A smartphone is a device that also belongs to the category of phones, but a phone is “smart”. This is a link between an ordinary mobile phone and a computer, an operating system is also installed on it. If we take into account only the external characteristics, then it is impossible to determine the difference between a smartphone and a telephone. This is facilitated by the presence on the modern market of a huge number of low-quality copies that imitate the “cover”, while having the “stuffing” of the most ordinary phone. Smartphones often do not have buttons, they have a touch screen, and control is carried out using a stylus or finger.

  • Please note: How to choose a smartphone

Smartphones and iPhones. what’s the difference?

IPhones are distinguished by their high cost. Even if the other smartphone is as close as possible in its capabilities to the iPhone, the cost of the latter will be higher. The iOS operating system is typical only for iPhones, smartphones are equipped with different systems. If we talk about why the iPhone is better than other phones, then unlike others, they are always made of the highest quality materials and assembled perfectly.

As you might guess, the phone, smartphone and iPhone are related to the type of devices with a similar orientation. The phone is significantly inferior to the smartphone and iPhone in the list of features.

Smartphones have a fairly large set of functions, are equipped with operating systems, which allows them to perform a huge number of manipulations. The advantage of the iPhone is the high quality of the materials from which it is made, as well as excellent assembly, a significant amount of internal memory, an easy-to-use operating system and a logo in the form of an apple.

It is hardly possible to make a choice in favor of a particular device, because each of them has its own tasks. A person who needs a miniature computer will not be able to get by with an ordinary phone, and someone who does not need Internet capabilities will not experience much joy from purchasing an iPhone or smartphone. By purchasing an inexpensive smartphone, you can significantly reduce costs, but at the same time, you need to be prepared for malfunctions in its operation. If the intention to purchase an iPhone is final, then the funds invested in such a purchase will pay off, and its work will delight the owner for many years.

difference, iphones

If you notice an error in the text, please select it and press CtrlEnter

What is the difference between audio formats, which one to choose for daily use and how this affects the sound quality of music

At the moment, the vast majority of gadgets that are capable of playing music support a very wide range of audio formats out of the box, without the need to install third-party applications or update firmware. But most people do not even imagine the huge number of audio formats that exist and which an ordinary smartphone can easily handle.

READ  The difference between Samsung asset and asset 2

But how do these formats differ from each other and why should we choose one of them??

A brief description of the properties of the most common audio formats

If we are talking about digital music, do you really need to know and understand about the properties of all audio formats? Simple answer: it depends on your requirements and taste.

All audio formats are divided into those that compress data and do not compress, as well as those that store sound in original quality (Lossless) and in quality with loss of detail (Lossy).

Simply put, in the case when you have enough memory on your computer, phone or network storage and you want to get the original sound quality of music, then you need to choose one of the audio formats that belong to the Lossless family.

But if you mainly listen to music on your phone or portable player, while using ordinary headphones or multimedia speakers, then you will only need to use an audio format belonging to the Lossy family.

But how do you make the right choice? Below I will provide a quick comparison of the main audio formats, thanks to which you can make an informed choice and enjoy your music.

  • MP3: was created by the Moving Pictures Experts Group (MPEG), which created and continues to create standards for storing and transmitting audio and video in digital form. In full, the format is called: MPEG-1 / MPEG-2 Layer 3 (MP3). It is the most popular music storage format in the world today.
  • MP3 simultaneously compresses data and processes audio to get the smallest possible file size. The bit rate can vary from 8 Kb / s to 320 Kb / s, the sampling rate is from 16 kHz to 48 kHz. The whole point of processing the original recording with the MP3 compression algorithm is to compress the information to the minimum possible. So, if in its original form a song takes about 70 MB of memory, then in MP3 format with acceptable quality it will take only about 7-8 MB, as you can see, the gain is significant, although it is achieved by degrading the sound quality.
  • AAC: The format has become popular because Apple has adopted it as the standard for storing, selling and distributing music in its ecosystem and iTunes. AAC is very similar to MP3 in terms of audio processing during encoding, although it gives a slightly better result.
  • AAC also not only compresses the data, but also performs sound processing, removing a certain type of data from it, thereby achieving significant savings in memory for storing music. The bit rate can vary from 8 kbps to 320 kbps, the sampling rate ranges from 8 kHz to 96 kHz. With more sophisticated and sophisticated compression and encoding algorithms, AAC music can sound better than MP3 and take up less memory. Another advantage of the AAC format is that it supports up to 48 channels, while MP3 only supports 2.
  • WMA: A format developed by Microsoft to compete with MP3. During encoding, data is compressed, and the music is processed and certain parts of it are deleted, thereby saving memory. However, there is a variation of the format called WMA Lossless that preserves the original sound quality. The overwhelming majority of modern phones, players and computers support this format and there should be no problems with its reproduction. However, some hardware may have difficulty playing it back, so if you want maximum compatibility it might be worth choosing MP3.
  • FLAC: Developed by the Xiph.Org organization, this format is free for any type of use and therefore is quite widespread these days.
  • FLAC uses data compression, however, it preserves the original sound quality of the recording. music is not processed. The recording quality can be 32 bit / 96 kHz (this is significantly higher than the recording quality for CDs, which is 16 bit / 44.1 kHz). The data compression algorithm can save up to 30% memory compared to the original recording, while maintaining perfect sound quality. It is for this reason that the FLAC format has become very common.
  • ALAC: This format is analogous to FLAC, but performed by Apple, the full name of which is Apple Lossless Audio Codec. Its properties are the same as FLAC, but its advantage was that all Apple gadgets could work with it without the need to install third-party applications. Since iOS 11, the FLAC format has also become fully compatible with Apple devices, so the urgent need for ALAC has diminished significantly for the sake of the freedom and greater compatibility with other devices that FLAC offers.
  • WAV: a format developed by Microsoft, this format stores sound in its original form, so files take up a lot of memory, although they preserve the ideal quality of music.
  • WAV does not compress or process sound, we can say that it is an ideal format for storing master copies and for further processing of sound. Although there are certain encoding settings that allow you to compress data, they are usually not used. WAV files are similar in storage method to PCM and AIFF formats.
  • AIFF: a format also developed by Apple, the full name is Audio Interchange File Format. The main purpose is to store music on Apple computers in its original form.
  • AIFF does not compress data and does not perform any sound processing, therefore, like WAV, it takes up a lot of memory. The best audio storage format if you want to further process it in the editor, or convert to other formats on Mac computers.
  • PCM: This format is used for digital recording of analog signals, which is what sound is. It is a standard for recording audio to CDs, but can also be used to store music digitally in computer memory. PCM does not compress audio, ideal for storing master copies of music or for professional audio work.
  • Now that you know how the main audio formats differ from each other, I hope you make the right choice, which will be perfect for you.

    Which iPhone Should You Choose in 2021?

    EC NC Head (NotchCoil) 0.25 Ohm

    Evaporator with single laser cut stainless steel coil. Such processing allows for a much more accurate “fit” the size of the heating element so that it has a resistance of 0.25 Ohm with practically no error.

    This vaporizer has a natural cotton wick and can work in all vaping modes. The steam is hot, the evaporator “stretches” easily.

    Such an evaporator serves a standard amount of time. from 7 to 10 days. Bathers highly appreciate its vaporization and taste transfer. many times better than EC Head 0.3 Ohm.

    EC Head 0.5 ohm

    The EC Head 0.5 ohm evaporator is a complete twin brother of the 0.3 ohm version except, of course, resistance and a slightly tighter puff and cool vapor.

    This is the same “head” with two spirals made of kanthal, combined into one, and a wick made of natural cotton. This evaporator is also included with the iJust S.

    The difference is a higher resistance, so EC Head 0.5 Ohm will give out less vapor and taste, but also consume less battery power and fluid supply, give less blow to the throat (trothit, TX).

    Although the puffs of steam will not be so big, but the “life” of the device will be longer. it is good to travel with this vaporizer. Its service life is the same as that of the 0.3 Ohm version. 7.10 days.

    As already mentioned, EC Head 0.5 Ohm is less popular than EC Head 0.3 Ohm, but this does not mean that the “head” is worse. just vapers like to “pile”, especially when the purchased mod allows them to do it without any problems.

    It is noted that with this evaporator it is more difficult to get a “garik”. a burning taste due to overheating of the heating element.

    EC Ceramic Head 0.5 ohm

    Evaporator with one stainless steel coil and 0.5 ohm resistance. The peculiarity of this model is that instead of a wick made of organic cotton, a “bath” made of ceramics is used, the micropores on which better conduct liquid onto a spiral.

    According to the manufacturer’s assurances, this allows for much better flavor development than on all other evaporators of the EC and ECL series. Bathers have not yet come to a consensus whether this is really so. the ability to feel the subtle nuances of tastes is different for everyone.

    Which iPhone Should You Choose in 2020?

    Such an evaporator is designed for thick 70/30 VG / PG sub-ohm liquids. The ceramic “bath” makes it more durable. such a “head” can last up to three weeks.

    However, ceramics are vulnerable to overheating, so you need to monitor the liquid level, as well as accidental (“idle”) pressing the vaping button without tightening.

    In addition, some bathers express concern that the material may crumble and microscopic particles enter the lungs. However, this is theoretically possible only with severe overheating and gross violations of the operating rules.

    The vaporizer puffs lightly and the steam is cool. This model is the most controversial according to the opinions of bathers. the reason for the already mentioned features of ceramics and the traditional discrepancy in tastes.

    Someone notes excellent taste, while others do not see any special differences from other vaporizers.

    ECML Head 0.75 Ohm

    Branch of the EC series with one vertical canthal coil and 0.75 ohm resistance. The peculiarity of the model is that it is designed for a tight cigarette puff, as indicated by the letters “ML” in the name (mount to lung).

    This vaporizer can be suitable for novice vapers who are just switching from tobacco, as the puff will be more familiar. almost like a cigarette.

    The vapor of this “head” forms less, cooler than the other described vaporizers, but reveals the taste quite adequately. Serves 7 to 10 days.

    Reviews of this model are good. experienced vapers even advise you to try vaping with this vaporizer if you have a lot of “experience” of smoking.

    ECL Head 0.3 ohm

    Another version of ECL Head with increased resistance. It differs from EC Head 0.3 Ohm in design and material of the coil. they are similar to ECL Head 0.18 Ohm.

    This “head” makes it possible to steam thicker liquids due to the wide “windows” for impregnating the wick and a slightly wider duct than the EC Head 0.3 Ohm.

    Compared to ECL Head 0.18 Ohm, vaporization will be less, as will the consumption of liquid and battery charge. Bathers received both models of this series equally well, as they do their job better than the original EC Head.

    A puff is light hookah, the steam is average in temperature. about the same as that of the EC Head 0.3 Ohm.

    EC2 Head

    Shortly before the publication of this article, Eleaf announced the new Melo 4 clearomizer, and with it the updated line of EC Head evaporators. EC2 Head.

    These are the same 0.3 and 0.5 ohm versions, but with a different design. For example, there are more “windows” for the intake of liquid, and the body itself began to look more modern.

    There are no significant differences in the updated line, so it fits with early clearomizers like the iJust S or Melo 3.

    What is the difference between biorevitalization drugs? How to choose what is right for you? We read and make the right choice

    In this article, we will again talk about a procedure very beloved by both me and the patients. about biorevitalization.

    Again, because I often write about her, talk often, and often carry out this procedure.

    Let me remind you that biorevitalization is the introduction of native, unstabilized (sometimes partially stabilized) hyaluronic acid into the skin in order to moisturize and tone the skin.

    Hyaluronic acid is the main component of the intercellular substance of the skin, it is she who creates that nourishment and elasticity inherent in young skin

    Also, hyaluronic acid stimulates skin cells (fibroblasts) to produce new collagen fibers, which makes the skin firm and taut.

    Unfortunately, since 20 years, the production of own hyaluronic acid has been gradually decreasing, for some this process is less intense, for some more, and this is where the biorevitalization procedure comes to the rescue, which allows you to prolong the youth and freshness of the skin

    And due to the fact that this procedure is very effective and useful, the market is literally overwhelmed with various biorevitalizants.

    I often hear questions from patients like. which is better? IAL systems or Teosial Meso? Gialripier or Meso-Warton? Teosial Meso-Expert or Teosial Redensity?

    And so on and so forth. How to choose from the whole variety of biorevitalizants, which are abundantly presented in salons and cosmetology clinics?

    I will tell you about the drugs that I use in my work and how they differ from each other.

    IAL-system (Ial-system, Italy). the drug consists of native, unstabilized hyaluronic acid at a concentration of 18 mg / g, without any additives and enrichments, has a pronounced moisturizing effect. One syringe is enough for the face. If you plan to chop off the neck (neckline, arms), then more than one syringe is used

    Personal observation is a very pure, high quality product. Due to the rather high density of hyaluronic acid, papules (tubercles at the injection sites) can last a little longer relative to other biorevitalizants

    READ  How To Install A Video Camera At Home

    The preparation is suitable for all ages and all skin types, on thin, dry skin, the effect can be seen more quickly. Volume 1.1 ml

    IAL-system ACP (Ial-system AiCiPi, Italy). this drug is denser compared to IAL-systems (the concentration of hyaluronic acid in it is 20 mg / g) and has a longer lasting effect due to partial stabilization of hyaluronic acid

    In the classical schemes of biorevitalization, it is prescribed after several procedures of the IAL systems to consolidate and prolong the effect of the results achieved. One syringe is enough for the face. If you plan to chop off the neck (neckline, arms), then more than one syringe is used

    Personal observation. the drug is injected a little deeper than other biorevitalizants, so papules after it become almost invisible already on the same day. The product is suitable for all ages and for all skin types, including dense, porous skin. Volume 1.1 ml

    Teosyal-Meso (Teosyal-Meso, Switzerland). the drug also consists of native, unstabilized hyaluronic acid, does not contain any additives. The concentration of hyaluronic acid in the preparation is 15 mg / g. this is the molecular weight of skin hyaluronic acid

    One syringe is enough for the face. If you plan to prick the neck (décolleté, arms), then more than one syringe is used. Personal observation. the drug is perfect for young, prone to dry skin. Volume 1.0 ml.

    Teosyal Meso-Expert (Teosyal Meso-Expert, Switzerland). a drug based on native, unstabilized hyaluronic acid, at a concentration of 15 mg / l, enriched with antioxidants

    As well as a set of vitamins, amino acids and trace elements that restore the skin, enhance its immune defense and normalize metabolic processes and protect against free radicals

    The volume of this preparation makes it possible to inject the face, neck and décolleté in one procedure. Personal observation. in addition to a very rich composition, its volume is valuable in this preparation, which is enough for a thorough injecting of the face, neck and décolleté. The preparation is suitable for all skin types and all ages. The volume of the preparation is 3.0 ml.

    Teosyal Pure Sense Redensity (Teosyal Redensity, Switzerland) is a preparation based on native, unstabilized hyaluronic acid, at a concentration of 15 mg / g, enriched with antioxidants, a set of vitamins, amino acids and trace elements. which regenerate the skin, enhance its immune defense and normalize metabolic processes and protect against free radicals

    That is, this drug is identical in composition with Teosyal Meso Expert, except that the composition of Teosyal Pure Sense Redensity contains lidocaine at a concentration of 0.3% (anesthetic), which makes the biorevitalization procedure more comfortable.

    The drug is available in two volumes of 1.0 ml. which is enough for the face and 3.0 ml. which is enough for the face, neck and décolleté. Personal observation. the drug is contraindicated for people with allergies to lidocaine, otherwise a wonderful biorevitalizant.

    Meso-Wharton P199 (Meso-Warton, USA). the drug consists of native, unstabilized hyaluronic acid, at a concentration of 15 mg / l, and the “Wharton Jelly Peptide P199” polypeptide

    This polypeptide is a synthetic analogue of an embryonic polypeptide and stimulates a number of regenerative processes in the skin, promotes the renewal of skin cells and the synthesis of new collagen.

    In addition, the preparation is enriched with antioxidants, vitamins, coenzymes and growth factors. The volume of this preparation allows you to prick the face, neck and décolleté in one procedure. Recommended after 40 years

    Personal observation. due to the high saturation, the drug may give some reaction, in the form of redness and swelling at the injection sites that persist for up to 2-3 days. However, most patients are ready to survive this because they see a good effect Volume 1.5 ml

    Hyalripier 08 bioreparant (due to the new method of processing hyaluronic acid, the manufacturing company has identified a new direction. bioreparation, which is essentially similar to biorevitalization, therefore, in this article I will also touch on bioreparants)

    So, Gialripier 0.8 bioreparant (Russia) is a preparation consisting of native, unstabilized hyaluronic acid, at a concentration of 14 mg / g, as well as vitamin C (stimulates the synthesis of collagen fibers) and L-carnitine (participates in fat burning processes). The volume of the preparation allows you to prick the face, neck and décolleté in one procedure

    Personal observation. the drug is well suited for patients with fatty deposits in the area of ​​the face and chin, because in addition to moisturizing and strengthening the skin, this drug also has fat burning properties.

    Gialripayer 02 bioreparant (Russia). a preparation consisting of native, unstabilized hyaluronic acid at a concentration of 14 mg / g, vitamin C (stimulates the synthesis of collagen fibers) and a complex of amino acids (“building blocks” of which collagen and elastin fibers are built), moisturizes and strengthens the skin

    The volume of the preparation allows to prick the face, neck and décolleté in one procedure. Personal observation. the preparation is recommended for thin, dry, atonic skin

    The drug may give some reaction at the injection sites (redness, swelling, itching), which lasts up to several days. The volume of the drug is 1.5 ml.

    And yet, how to choose a drug?

    If you are 28-33 years old, if you are unhappy with the tone of your skin, if you have thin skin and wrinkles have formed, if you have dry skin, if you have age spots, if you have a tendency to allergies, then you should think about a preparation with a clean hyaluronic acid without additives. Teosial-Meso, Yal-systems

    If you do not have a tendency to allergic reactions, or if you have already done revitalization with a preparation containing only hyaluronic acid (no additives) and you want to try something else, Teosial Redensity will suit you. If the task is to pierce not only the face, but also to capture the neck and décolleté, then the drug of choice is Teosial Meso-Expert 3.0 ml or Teosial Redensity 3.0 ml

    If you are from 33 to 40 years old, you are dissatisfied with the quality of the skin, its tone, you feel that there is no former nourishment and freshness, if you first thought about biorvitalization and you have a tendency to allergic reactions, then the drugs of choice are Ial-systems and Ial. ACP systems (according to the scheme)

    If you have already done biorevitalization with pure hyaluronic acid and you want to try other drugs, you are not prone to allergies, Teosial Redensity 1.0 ml is suitable for you. If the skin of the neck and décolleté also needs biorevitalization, you can think of Teosial Meso-Expert 3.0 ml or Teosial Redensity 3.0 ml. It can also be Gialripier 02. if you have thin skin and Gialripier 08. if there is a need to reduce the volume in the face oval area.

    If you are 40 years old and older and you are thinking about biorevitalization for the first time, then, most likely, the choice will fall on Ial-systems and Ial-systems ACP (according to the scheme). Also, if you do not have a tendency to allergic reactions, it can be Meso-Warton, Teosial Meso-Expert, Teosial Redensity, Gialripayer 02. if you have thin skin and Gialripayer 08. if there is a need to reduce the volume in the area of ​​the oval face.

    These are all, of course, not strict rules, but only possible choices based on the recommendations of manufacturers and on my personal medical experience. Remember that biorevitalization is a useful therapeutic procedure, trust your cosmetologist, follow the course of procedures recommended by the doctor, and the result will not be long in coming.

    Sign up for the biorevitalization procedure (from 5500 rubles): 7 (926) 737-15-04 daily 10.00-21.00

    I immediately publish all the most interesting on Instagram ☝ Subscribe!

    What is the difference between AMT devices of the LA, LA2 and FX Drive mini lines??

    Today I will try to reveal this, as it turns out in practice, “great secret” for many:

    What is the difference between AMT devices of the LA, LA2 and FX Drive mini ranges??

    To begin with, it is worth noting that the abbreviation “LA” in the LA and LA2 lines means nothing more than the phrase “Legend Amps”, emphasizing that the most legendary and popular guitar amplifiers of various world brands were taken as the basis for the sound of the preamps of both lines.

    Let’s look at the answer to this question using the example of specific devices:

    • AMT P1. single-channel preamp (DRIVE channel / true bypass);
    • AMT P2. two-channel preamp:
    • in PREAMP OUT mode. DRIVE / CLEAN channels;
    • in DRIVE OUT mode. DISTORTION / “sparing” active bypass);
  • AMT FX P-Drive mini. overdrive pedal (DISTORTION / true bypass).
  • The following visual diagram will explain a lot (the picture is clickable):

    It is logical that devices operating in the PREAMP OUT mode (in our case, these are AMT P1 and AMT P2), are connected directly to the power amplifier (“power amp”. for example, to AMT Tubecake) or “in the gap”, that is, in “ Return Return “of the LOOP FX of the guitar amp (” head “).

    All devices operating in the DRIVE OUT mode (in our case, these are AMT P2 and P-Drive mini) are connected to the CLEAN preamp channel or directly to the INPUT (“in the face”) of the guitar amplifier (“head”) / amplifier combo.

    The AMT P1 pedals (as well as the entire LA line) and AMT P2 (and all LA2 series devices) also contain a separate CABSIM OUT output, which allows you to connect directly to a mixing console or to a sound card line-in. Both AMT P1 and AMT P2 are powered by both adapter 9

    12 volts, and from a conventional “crown” battery. The pedals of the FX Drive mini series do not have all of this: AMT FX P-Drive mini is an ordinary DISTORTION, which does not have any “cabsim”, the pedal can (more precisely, from the point of view of the formation of a guitar sound) be connected only directly to a clean channel preamp and power it only from the power supply (due to the compactness of the pedal case, there would be no place to physically insert the “crown”).

    At the same time, of the significant advantages in the case of using AMT FX P-Drive mini, this very compactness should be highlighted: the “snickers” pedal format can significantly save space in your pedalboard.

    over, if we talk about the sound of devices, then everything looks like this:

    • The only overloaded AMT P1 preamp channel sounds almost identical to the overloaded AMT P2 channel (apart, perhaps, some small nuances in the sound, which, if you can hardly notice, then only comparing both devices “head-on”);
    • The CLEAN channel of the AMT P2 preamp (as well as ALL LA2 devices without exception) is based on the sound texture of the legendary Fender Twin amplifier, which is, in fact, a classic in the standard for the formation of a pure tone of a guitar sound;
    • The AMT P1 and AMT P-Drive mini pedals do not have a “clean” channel: when the footswitch button is turned off, the signal from the input is sent directly to the output using the “true bypass” method. This is important to remember especially when using LA pedals.!
    • In the AMT P2 device in the DRIVE OUT mode, when P2 acts as a conventional DISTORION pedal, when the footswitch button is off, the output will be: “gentle” active bypass, which reduces the requirements for minimizing the length of connecting cords, maximally preserving the original sound of the instrument when effect off “(taken from the Russian-language description of the AMT P2 device on the official AMT website).
    • The distortion of the AMT P-Drive mini will sound very similar to the DRIVE OUT signal of the AMT P2. I deliberately did not write “identical”, since, nevertheless, the tone block of the AMT FX Drive mini lines differs from the tone block of the LA2 series, so it will take some time to, say, comparing “head-on” AMT P2 and P-Drive to achieve this identity in sound at certain settings. It’s another matter that such activities are, in fact, stupidity, so we can say that, in general, the AMT P-Drive mini overload. there is AMT P2 sound in DRIVE OUT mode.
    • A distinctive feature of all LA2 pedals is the ability to use ALL THREE outputs from the device at the same time: that is, say, send DRIVE OUT to the INPUT input of a combo, and PREAMP OUT to plug into the same AMT Pangea (for example, to record a Live guitar signal from a concert, etc.). ) and send CABSIM OUT to the mixing console. And everything will work fine at the same time!

    Well, and, finally, I will give a few tips on the possible commutation of the devices of the above lines among themselves (I deliberately omit here the option when this or that pedal is in the “true / active bypass” mode).

    BYRGPUB.COM 2021