How to connect a printer to a Wi-Fi router: print settings

Hi! He himself recently managed to optimize his workspace, so in this article I want to share how to configure the printer through a Wi-Fi router. With a small background and personal experience for all occasions for almost any printer model. Begin!

You have additions? Your printer connects differently? Share with other readers your history in the Комментарии и мнения владельцев!

A little theory

There are several ways to organize a wireless print on the printer:

  • Direct Wi-Fi connection-if the printer has a built-in Wi-Fi. Our article is not about that, We already wrote about this, and here much depends on the specific model of the device.
  • Connecting the printer via USB to the computer and the organization of network access through the router.
  • Connecting the printer to the router via USB. and all the devices when contacting their router will be able to print. This is the main topic. We will dwell on it in more detail.

We wrote about all ways to connect the printer in this article.

In my practice for many years, the printer was connected to a computer, and the seal was made through a regular network printer. Subteen is convenient. But faced the fact that the computer stopped being constantly turned off. Total: if you want to print. turn on the computer. It began to strain a little.

How a decision appeared an idea to organize work through a router. Fortunately-it had a USB port and the capabilities of the print server. As a result, I connected it, went through tons of manuals (not so simple), installed utilities everywhere. and everything works 24/7 without unnecessary gestures, because the router in the house is constantly turned on.

Not all routers with a USB port support printers. Be sure to check the technical characteristics of your printer before starting. after all, do not return the time spent.

The basic connection to the router is performed through a USB port. In the Router setter, you need to activate the print server on USB. Connection to the router for printing is carried out through special utilities. The most common routers for this are ASUS and TP-Link (not all models are suitable).

IT blog for Windows

Consider several ways to connect a USB printer over the network.

For example, we have 2 or more computers in the local network, to one of the computers (for example Server) is connected via a USB port printer (Canon MF 4400).

Task: to connect this printer to another computer via a local network.

The printer connected to the Server printer must be “shaken” (enable common access), for this in the printer properties, you need to select the “Access” tab and install the checkpoint opposite “General access to this printer”.

It is also necessary to check whether the overall access to files and printers is included.

In Windows HP “Network”. “Properties”. “Access to files and printers of Microsoft networks” should be installed and marked with a checkmark.

In Windows 7 “Networks Management”. “Change the additional parameters of general access”

On a computer where you need to install a printer on the network, you need to select the “device and printers” item in the “Start” menu (for Windows XP “Printers and Faxes”), select the “Installation of the Printer” in the window that appears.

Next, you need to select the installation of a network printer.

In the “Search for Available Prinaters” window, you need to choose the desired “shaved” printer.

If the printer is not detected, then you need to click the “required printer in the list” and in the window that appears to select “Select a common printer named” and enter the name of the computer and the name of the printer in the field, for example:

\\ server \\ canon MF4400 Series UFRII LT and press the “Next” button “.

In the next step, click the “Next” button “.

How to Share USB Printer over Wi-Fi or LAN for Multiple Computers to Print on Wireless or Ethernet.

At the last step of the installation, you need to make sure if the printer is installed, for this, click the “Printing Page Printing” button, if the page is printed, the printer is successfully installed.

You found the necessary information on this site and it helped you. You can help this site by throwing several.

How to make a regular printer with a network?

There are several ways to make a regular laser printer with a network. To do this, it must be equipped with a special network port for connection or antenna. Using a router or drive, you can give permission to access the printer for all devices connected to a particular network.

As well as a suitable solution to the problem, the use of a special print server may be. He performs a specific task: connects any printing device to the network.

How to connect?

To create a connection on a local network through a router, you need to make sure that the printer is working and connected to a computer. It will not be superfluous to update or install the driver for the printer personally and for the operating system as a whole.

In many cases, malfunctions of network printers arise precisely due to problems with the current version of the protocol or software.

As soon as the user is convinced that the printer is working and ready to work, you can proceed to set up the connection itself.

In Windows 7, for this you need to go to the “Devices and Printers” section. Then call the context menu of the properties with the right button and go to the section indicating access to the device. In the general access section, you need to put the flag and save the amendment. As a rule, for the primary setup this is enough.

There is another nuance when setting up a local network.

If there are several computers, and one of them plays the role of directly the “printed” server as the main in the hierarchy, at the time of receipt of the request for printing, the computer must be turned on.

You can add a printer to the list using the corresponding button. If everything is configured correctly, then the system without much difficulty recognizes the device.

When Windows 10 is installed, sometimes the system suggests adding a printer immediately if it sees a non.swarmed device on the network.

Print server setting option

The section will be considered on the example of TL-WPS510U. Using a Wi-Fi print server is possible in several versions:

By default, Wi-Fi printer is configured to work direct connection from server to laptop (Peer-to-peer). Default settings are as follows:

  • Username:
  • Password: 0000 (or admin).
  • AD-HOC wireless connection mode (Peer-to-peer).
  • Channel 1.
  • SSID (Wi-Fi Points)-Wlan-PS.
  • IP address-192.168.0.ten.

Setting up a print server for communication with a router and binding to a home local network (infrastructure mode):

  • Since the default adapter works in AD-HOC mode, it must first be connected to a laptop via Wi-Fi.
  • Connect the module to the printer and include both devices to the power supply network. Wait for 40 seconds while the device initializes the settings.
  • Using a laptop, open a list of wireless networks and connect to the Wlan-PS access point.
  • Then open the “control panel”. the “network control center and total access”. “change in the adapter parameters”. PKM on the active network. “properties”. “TCP/IPV4”. IP IP laptop so that both devices are on the same network. Mask subnet
  • You can first register (if the network is already created, but not active), and then connect.
  • Reload the print server and, if necessary, connect again to the wireless point.
  • Open the browser line and enter the control panel (address 192.168.0.ten).
  • Go to Setup-TCP/IP and set the values ​​of the IP address for the print server, depending on the network range in which the router is located. If the IP address of the router is, respectively, indicate the address in this range for the adapter Wi-Fi, plus write the address “Default Router” and click “Save and reboot”.
  • After a rebut, return to the network settings from the laptop and put the TCP/IP to receive the address automatically (or put it at a level higher in the same subnet, for example,
  • Then again connect to the wireless wi-fi adapter.
  • Go to the print server settings page to set the Wi-Fi parameters in accordance with the settings of the main wi-Fi router. This is done in the Wireless section.
  • Replace the IP laptop again, but this time put up “get automatically”. And connect to the Wi-Fi point of the router.
  • To make sure that the Wi-Fi adapter has become part of the local network, go to the admission of the router and check the MAC address of the devices operating in it. The adapter Wi-Fi can be viewed in the “System” section.

Using a specialized utility, you can configure the operation of the module paired with the printer to interact with any local computer.

To connect the printer to a wireless network, the so-called “print servers” are used. They are connected to the peripheral gadget via USB-B. There are devices that serve as a wired bridge to connect the printer to the router. There is also a Wi-Fi adapter for a printer that can be connected directly to the laptop through an access point, or through a router, after setting up the print server as a repiter for the access point of the router.

If you have questions, or want to share your experience, Valcom in a commentary. Readers’ response is the best reward for our authors! Thanks to all!

Connection to USB one of PC

Our scheme will be quite simple. The printer will be connected via USB cable directly to one of the computers. We shake it, and we can have access to this printer from any device connected to this local network. Let me remind you that for this it is best to use the connection to the router.

  • We connect the device to one of the computers using a USB cable.
  • Turn on the computer and printer. If you are connected to the Internet, then the drivers should be installed automatically. But you can also install them from a special disk that is included. Some printers immediately have a storage with drivers. Open a “computer” or a conductor and see if there is a new medium in the system. You need to run the installation of drivers.
  • Now you need to configure the network on the same computer. To do this, follow the instructions below:

Now you need to connect to the printer over the network, for this:

  • We go to the “Start”, we find the section “Devices and printers”. if it is not, then enter this name into the search line. There will be your connected device. you need to go into properties by clicking PKM.

Now on the second PC (on which there is no connection to the printer). you need to connect it:

Print server, through a network cable and Wi-Fi

The printer will be connected to the USB port of the router, and all other devices will be printed through the router to the router. Also similarly, you can try to connect the device by Wi-Fi-the instructions can be viewed in the user manual. Or using a conventional network wire. just connect the device to a free local port on a router.

  • Connect the device to the router.
  • We need to find out the IP address of the router itself. To do this, go into the command line. click R and enter the “CMD”.

ATTENTION! If you have connected the device to the Wi-Fi router or using a network wire, then you need to find out its IP address. This can be done through the device menu. Or through the router of the router-enter the IP address of the router to the address line of any browser and enter the configurator of the Internet center. You need to find a section where all the connected devices are displayed. where there will be an IP address of your printer. This section may be in “DHCP” or “Wi-Fi”. You may have to step up by points and find this information.

Connecting via network cable

Modern users, to connect the computer to the printer, use one of several ways. they mate devices using a network USB wire, set it up to work on a wireless network. For example, the network cable has many advantages. It includes many wires isolated from each other, combined into a dense shell. Such isolation is made of polyvinyl chloride, polyethylene or polypropylene and is strong enough to break. If, for example, an office employee decided to use a network cable, he will win:

Network cables are often used as components of elements. They are placed in the box at the manufacturer along with the instructions and the printer so that after the acquisition of the device, the user can immediately begin to work. Office employees with high experience without problems mare two devices. a printer and a computer operating Windows operating system.

For inexperienced users, you should clarify the connection order using a network cable.

The procedure is simple, and with the connection of the functional product to the computer, every newcomer will cope with the beginning of activation. Consistent steps are described below.

  • Belt one end of the wire into the PC port (USB connector), and the other in the nest of the printing device.
  • Turn on the device by clicking on the button.
  • Install software from the disk (diver).
  • Wait to complete the conjugation process of two devices.

The last stage is to print a test page (he will propose to do it on his own). In some cases, especially when the printing device of an outdated model, you have to connect the printer manually. This can be done as follows.

  • Combine a computer and peripheral device with a cable.
  • Install software.
  • Activate the “control panel” in PC.
  • Find the line “Devices and printers”.
  • Click “Add printer”.

Next, you need to follow the recommendations of the “Master of the Connect”. They may vary, depending on the installed operating system, but in general, they clearly demonstrate the completion of the conjugation process.

How to connect via USB?

If it is not possible to determine the capabilities of the printer, whether it can work through Wi-Fi, if there is a suitable connector on the router, the method indicated below will help to solve the problem. First, to connect the computer and the auxiliary device, you can use the cord supplied in the kit. Further procedure for such.

  • Call the command line. dial in the search field “Perform the CMD value”.
  • Enter the IPConfig command and press Enter.
  • Record or remember the address of the router.
  • Close the command line.
  • From the “Start” menu, open “devices and printers”.
  • Select “Add printer”.
  • Activate “Add local printer”.
  • Put a checkmark in the line “Create a new port”.
  • In the window that opens, print the Standard TPC/IP Port value and click “Next”.

After that, a new connection will appear. When the computer finds the necessary port, a new window will open, where it is necessary to put the daw in the “special” item and click “Parameters”.

In free fields (“Port name”, “Printer name” or “IP address”), enter the values ​​pre.recorded from the command line. Also mark the LPR item below and press OK. “Printer installation” will appear, where it should be noted “special” and click “Next”. In the window that appears, enter a new name or leave everything unchanged. At the final stage, indicate “There is no common access to this printer” and print a test page.

How to connect a printer through a router

Before connecting a Wi-Fi printer to the router, decide on the method of switching. The decision is made taking into account the location of the device. If the print device is standing near a computer or laptop, the easiest way is to connect a wire. If the devices are at a distance from each other, the best solution is to connect using Wi-Fi. Consider each of the ways in detail.

First, consider connecting the printer through a Wi-Fi router without the use of additional wires. The method is suitable for equipment with a built-in or remote Wi-Fi module. In its absence, the only exit will be a direct connection using a USB cable (more on that below). Two ways will stand out how to connect a Wi-Fi printer to a router via a wireless network.

  • Study the instructions for the print device and find WPS on the inclusion point in the menu. Depending on the model, the location and name may differ.
  • Squeeze the WPS button on the printer and wait for about two minutes.

As a rule, these actions are enough to make the printer with a network through a router and transfer data on printing to it.

  • Turn on the router and connect to the Internet.
  • Insert the printer into the outlet and go to the menu.
  • Find the settings point in it and find the section related to Wi-Fi.
  • Find the name of the network that is necessary in your case.
  • Click on it and enter the password.

Knowing how to connect a network printer through a Wi-Fi router via a wireless network, you can make a setup at any time and send documents for printing “by air”.

Important! Remember that a large number of conjugated devices can create problems for work. Therefore, first of all, read how many devices you can simultaneously connect to the router via Wi-Fi. This can save your time and nerves in the future.


In the absence of Wi-Fi or in the case of failures in operation, the printer connection to the router through USB is available. This is a standard option that is like most cases and involves simpler settings. The algorithm is this:

  • Turn on the distribution point and wait for loading.
  • Insert a plug of power a printed device into a socket.
  • Check the fact of connecting devices.
  • Enter IE or another browser, then enter the URL 192 line.168.0.1, and then press the input.

Remember, if you are not allowed further and nothing happens, change the last two digits to

Immediately note that by the same principle you can connect the printer through the LAN to the router, but provided that a special connector is provided in the printing device. In some additional actions there is no need.

How to setup

Above, we examined how to connect the printer to the router via USB or Wi-Fi. But the steps discussed above may not be enough due to the need to configure the equipment used. Consider instructions for performing this work.

Roter setup

To connect the printer to the network through a router, only a few actions are required. the inclusion of equipment and the use of one of the above methods. The router itself does not require additional settings, because all the data has already been entered into it. After connecting to the router, the latter should see All-In-One Printer. If this does not happen, it is necessary to update the software to the latest version.

Setting PC

Before connecting the printer to the router via Wi-Fi or USB, it may be necessary to configure the computer itself.

Consider the algorithm of actions using the example of Windows 10:

  • Click on.
  • Select the TCP/IP device item, and then write down the address of the router (located on the back of the modem, for example,
  • Wait for the port search, enter the “special” type of device and go to the parameter task.
  • Find the LRP protocol and use any name.
  • Install the drivers on the printing device.
  • Give the name to the printer, remove the network common access (there is no total access) and try to print a sheet of paper.
  • Perform the same actions on other PC or laptops, because the printing device is recognized as a local machine.

These actions are enough to connect the printer over the network through a router, and in the future use the device. If you choose a method between Wi-Fi or USB, the first option is more preferable, but it is more difficult to set up.

How to connect a printer by Wi-Fi for Android and iOS

Sometimes there are situations when only a smartphone with Android or iPhone is at hand. In this case, you need to know the intricacies of connecting a network printer through a router using a smartphone.

With the help of adroide

If there is a Wi-Fi module in the print device, you can connect not only a PC or laptop, but also a smartphone.

  • Connect the necessary equipment. Serve power, connect the device with PC and put the cartridge.
  • Turn on the printer.
  • Connect the router if it has not been turned on before.
  • Turn on the Wi-Fi module on the print device. This can be done through the settings or using a special button. Detailed information can be found in the operating instructions.

After that, several ways to connect All-In-One Printer through a router using a smartphone-directly using a virtual printer or through a remote connection.

The easiest way is using a direct connection. Much depends on the smartphone, because many models allow you not to use programs, but they can connect with the network and transmit photos for printing directly. Many smartphones have special programs, for example, Canon Print.

If there is no such software, you can download it with Play Market (also suitable Printershare). The algorithm of actions is this:

Knowing how to connect the All-in-One Printer through a Wi-Fi router, and having a phone at hand, you can print a photo at any time or send a document for printing. Note that other applications work on the same principle, so you do not need to consider them separately.


If you connect the printer via Wi-Fi router on Windows 10, 8 or 7, try to transfer files to print using iPhone. The algorithm of actions is this:

  • Make sure the printing device supports AirPrint.
  • Check that all devices are connected to one Wi-Fi network and are in the working radius of action.
  • Open the program with which the seal will be carried out.
  • To search for printing, click on a special symbol (arrow or three points).

At the final stage, click on the print button and make sure that the document is printed.

Now you know whether it is possible to connect the printer to the router via USB or Wi-Fi, how to use a laptop or smartphone to solve the problem. The basic information on setting can be found in the instructions for the printing device and the router. The easiest option is how to connect a printer through a Wi-Fi router is to find the desired network in the printing settings and enter a password. But there is not this for you, there will be workarounds. The task of the article is to simplify the task, because the use of the above instructions allows you to exclude time loss and immediately send a document for printing.

Possible problems and their solution

We will analyze some of the most common problems that may arise in the process of setting up and using a network printer.

The network printer is not displayed in accessible

So, you connected the printer according to the instructions, approached another computer, but when trying to print, do not see the network device. What’s the matter?

Usually this problem is caused by the fact that the PC from which you are trying to print something is not connected to the local network. Make sure that:

  • It is connected to the same router via Wi-Fi or cable;
  • The router is included;
  • The names of the working group of all your computers on the network coincide. In Windows 7, this can be done by pressing the right button on the “my computer” and choosing “properties”. In Windows 8, 8.1 and 10. with the right button for “Start”, and then. “Computer Management”. You will see the name of the computer and the name of the working group. The first parameter should vary in all PC connected to the network, and the second. on the contrary, coincide. If not so, select one name for the working group and assign it to all computers on the network.

Sometimes the problem with displaying a network printer is associated with a malfunction of the ports. Make sure that the USB port of both the printer itself and the devices to which it is connected do not have physical defects-are not broken and not bent.

The network printer does not print

If the network printer is displayed in the list of available ones, you can connect to it, but the printing process does not go, you need to conduct a small diagnosis. See if there are error messages on the screen of the printer itself. You will be surprised, but often such a problem is explained by the simple absence of paper in the tray or paint in the cartridge.

If any messages are not displayed on the printer itself, and the documents sent to print simply go into the void, then the reason is most likely lies in the drivers:

  • If you connect the printer via a print server, then again roll the list of devices supported by it. Most likely, your model of the printing device is simply not suitable. If you bought a print server recently, you can try to return it to the store or exchange it for another model;
  • If the connection is carried out through the router, make sure that the drivers on the printer are on the PC you are interested in. This can be done by connecting the printer to it directly. If the seal does not pass even with such a connection, then you need to update or completely reinstall the drivers. If the printer prints during a direct connection, then the problem can lie in the firmware of the router. If you updated it recently, then roll back to the previous version (just install the older version of the firmware by downloading it on the manufacturer’s website);
  • If the printer is connected via PC, then you need to check the drivers only on this computer. Make sure that the PC is going on directly from this PC. If this is not the case, demolish and install the drivers again.

Reinstalling drivers is carried out as follows:

  • Download the fresh version of the drivers for your version of Windows on the official website of the printer manufacturer. Drivers are usually located in the “PO”, “support” or “loading” section. Make sure that you download the driver for your printer model.
  • Go to the “Device Manager”. In Windows 7, you need to click on the on “My computer” and select the appropriate item. In Windows 8, 8.1 and 10. click on the “Start” with the right mouse button and select “Device Manager”.

From this context menu you can access many administrator utilities and programs

The network printer does not connect

If, when trying to connect to the network printer or print something with it, you have a “Windows” error with it cannot connect to the network printer, ”this usually indicates a shutdown of the press service. This can happen for various reasons. a failure when installing drivers, viral on.

Для чего нужен принт-сервер, его обзор и подключение. Как USB принтер сделать сетевым?

In Windows 10, an error message looks somewhat different, but the text does not change

  • If the printer is connected to the LALL via PC, then we perform all actions below on it. If through a router or print server, then on the computer from which we want to print.
  • Open the “control panel” (Windows 7. “Start”. “Control Panel”, Windows 8, 8.1, 10. PKM “Start”. “control panel”).
  • Select “Service” item.
  • Find in the list “Print Manager”.
  • Click on it twice. the parameter window will open.
  • Put a checkplace opposite the “automatic launch type”.
  • Make sure the service is enabled. If you can click on the “enable” button, do it.

Setting up a network printer can take a little time, but in the future you will be grateful for your work that you did. After all, it is much more convenient to send documents for printing directly from the workplace than to drag files to another computer, and only after that is printed.

Types of connection

Before you configure the network printer through the router, we will deal with the possible connection options. So, you can connect the printer to the router in the following ways:

  • Through a USB port. This connection is possible if your router is equipped with a USB connector and supports the seal over the network.
  • Through LAN Port. If your printer is equipped with a built-in print server with a network port, you can connect it to a router using a patch cord.
  • By Wi-Fi. Some modern printers are equipped with Wi-Fi module and can contact the air router. You can also connect to them directly from the laptop equipped with a Wi-Fi module.
  • Using a hardware print server. This is a separate device to which the printer is connected. The print server has a LAN port for connecting to the router.

USB connection

Connect your printer to the USB port of the router using a cable. Both devices must be turned off. Then we turn on the router, wait until it loads. After that, you can turn on the printer. By default, the router does not need special tuning, it must immediately recognize the printing device. You can check this by entering the Web-Inteatheis of the device and opening the network card. The model of your printer should be displayed there. If this does not happen, check the status of the print server. He must be online.

Wi-Fi connection

If your printer is equipped with a wireless Wi-Fi module, then you can connect it to the router by air without any wires. You can do this in two ways:

  • WPS. In the instructions for your printer, we find how to activate the WPS function. Then click the WPS activation button on the router. We are waiting for the connection to be established (the indicator on the router will stop flashing) and check if your printer has appeared on the network map.
  • WEP/WPA. Manual setting is similar to setting the first connection to the wireless network of any Wi-Fi device. We find the network setting in the printer menu, select the network we need and enter the username and password.

Connection via LAN port

If you are a happy owner of a printer with a network port, you can connect it to a router via LAN using a conventional patch cord. The cable usually includes. If it is not, you can use a patch cord from a router if you are not involved. Or buy a cable of suitable length in the store.

In the device menu, you need to ask him a static IP address. It is advisable to do this even if the DHCP service is tuned on your router. The fact is that if the IP address of the printer is constantly changing, this will complicate its search and it will periodically disappear from the list of available devices. Of course, there is an option to reserve an IP address in the DHCP settings of the MAC address server.

After that, the printer will reboot. After which it can be found in the list of network devices.

Install the printer drivers and print the test page.

Using a hardware print server

If your printer is not equipped with a Wi-Fi network or a Wi-Fi module, and a router-a USB port, you can purchase a hardware print server. As mentioned above, this is a separate device, which is a mediator between the router and the printer.

Budget models have one USB port and network port. expensive-several USB, as well as optionally, LPT port. Also, the print server can have a built-in Wi-Fi module and connect to the router not by cable, but by air.

First we connect the print server to the router, and the printer to the print server.

Print server setup is carried out using the attached branded utility. It allows you to find a print server on the network and set an IP address for it. Further configuration is carried out through the web-integer according to the instructions. You can enter it by introducing an IP browser in the address bar, which was installed for a print server during the initial configuration.

As you can see, there are several ways to connect your network printer to the router depending on its hardware capabilities.

Computer settings

Regardless of what of the methods described above you have chosen, the settings on the computer are performed the same in all cases.

You can configure through the “control panel” or through “printers and scanners”. The setting is similar.

“Printers and scanners” appeared on the latest versions of Windows. This application is suitable for setting up a network printer on Windows 10.

We will configure through the “control panel”, which is available on all versions of Windows. In particular, suitable for configuration on Windows 7 network printer.

Find in search of a computer “Control Panel”. In the control panel, we find the “Devices and Printers” section. Click on the point “Add printer”.

The system will try to find the device connected to the computer, but, of course, it will not succeed. Therefore, we will use the item “The necessary printer is absent in the list” at the bottom of the window.

On the next page, select the addition point by TCP/IP address or node name. Click “Next”.

In the next window in the “Type of Device” drop-down list, select “TCP/IP”, and below in the “IP address” and “port name”, we enter the address, which we get as follows:

  • With a connected printing device for a USB to a router, we enter the IP address of your router, which you enter in the browser to enter the web-integer. This is usually or It is indicated on the label in the lower part of the device.
  • When connecting via LAN port with a given address through the menu. In this case, we enter this address.
  • If the printing device is connected via LAN and receives the IP address with the DHCP server, we look at what address was received on the DHCP server.

A checkplace from a survey point and driver selection is automatically better removed.

In the next window, put a checkmark in the “Special” item and next to it, click the “Parameters” button.

In the settings window, we select the LPR protocol, and in the “Stage name” field. in our example we wrote “NASETI”, in fact, any name is written. Click ok and return to the previous page.

Now you can click “Next” and proceed to the actual installation of the printer. The driver can be selected from the list or installed from the disk.

You can set a new name to the printer, or you can leave the default set.

We refuse to resolve overall access to the printer and click again “Next”.

There should be a message that everything went successfully and the printer is ready to work. To make sure of this, print the test page.

Print server setting on a router

If you have difficulties, you can use the utility to configure the print server on the router. You can download it from the official website of the manufacturer by selecting your router model in the “Download” section.

To configure the print server on TP-LINK routers, the TP-Link UDS Printer Controller is used. After you downloaded and installed the program on your computer, run it and it will automatically find all the printers connected to the router. Select the one you want to use for automatic connection.

The utility works with Windows and Mac OC.

For D-LINK routers, use Siutility proprietary utility. If you have a router of another manufacturer, look for compatible software on the official website.