iOS 11. How to Install via iTunes

Installing iOS 11 the safest way. The installation of new versions of iOS via “over the air” often causes various problems that can slow down the iPhone, iPad or iPod touch. iOS 11 is no exception here, so it’s recommended to install the update via iTunes for the most reassurance. How to install iOS 11 on your iPhone, iPad or iPod touch using iTunes is explained in these instructions.

How to install iOS 11 using iTunes

Important! Back up your iPhone, iPad, or iPod touch using iTunes or iCloud. A backup is necessary to be able to return from iOS 11 to iOS 10 with all your data intact. Please note that if you rollback from iOS 11 to iOS 10, you will only be able to restore to the copy created on your mobile device running iOS 10. If the backup is replaced with a new one already created on iOS 11, you will not be able to restore to it from iOS 10.

iOS 11: How to Easily Install For FREE (No Computer Needed!)

Download the iOS 11 IPSW file using the links below:

Connect your iPhone, iPad, or iPod touch to your computer with a USB cable, and launch iTunes.

In the iTunes window, select your mobile device.

Hold down the Shift key and click the “Update” button.

In the window that opens, select the iOS 11 firmware file you downloaded in step two.

Confirm to start upgrading your iPhone, iPad, or iPod touch to iOS 11.

Wait until your device is up to date.

Done! Your iPhone, iPad or iPod touch has iOS 11 installed in the safest way possible. If even after this installation you are not satisfied with the speed of iOS 11, you can always roll back to the stable iOS 10.

Put 5 stars at the bottom of this article if you like the theme. Subscribe to us Telegram. Instagram. YouTube.

Not all iOS 10 devices will be able to update to iOS 11. The list of supported devices because of the outdated technical characteristics, were excluded iPhone 5, iPhone 5c and iPad fourth generation. So the list of iOS 11-enabled devices is as follows:

  • iPhone 7
  • iPhone 7 Plus
  • iPhone 6s
  • iPhone 6s Plus
  • iPhone 6
  • iPhone 6 Plus
  • iPhone SE
  • iPhone 5s
  • iPad Pro 10.5 inch
  • iPad Pro 12.9 inch (second generation)
  • iPad Pro 12.9 inch (first generation)
  • iPad Pro 9.7 inch
  • iPad Air 2
  • iPad Air
  • Fifth generation iPad
  • iPad mini 4
  • iPad mini 3
  • iPad mini 2

If you’re looking for maximum performance related to the software, then it’s worth reprogramming it from scratch. Sure, the wireless upgrade method does its job by saving your files and settings, but it doesn’t have the polish and improvement of a clean install. So, if you want all the performance benefits associated with iOS 11, then we highly recommend going the clean route. Follow the instructions below and you’ll be up and running in no time.

See also  How to Remove Activation Lock on iPad

Downgrade MacOS Big Sur Beta to macOS Catalina [How to do]

Back up everything first iCloud or iTunes

Since you are going to clean your iOS 11 installation using iTunes, you will lose all your files and settings. It would be a wise move to back up everything in a safe and secure place right now, or else those important family vacation photos will be a thing of the past.

Backing up with iCloud

Backing up your files and settings with iCloud is a simple example: select “Settings” “Apple ID” “iCloud” “Backup iCloud”, and then click “Backup Now”. If iCloud backup is disabled, you can turn it on right away, otherwise it won’t backup.

upgrade, ipad

Backing up with iTunes

First of all, make sure you have iTunes installed on your PC or Mac. You can download it from Apple.com/iTunes. Once installed, run it, connect your iOS device to your computer, select your device in iTunes, then select “Backup” “To this computer”. This may take some time, depending on the number of files on your device.

How to create a MacOS Big Sur Beta USB installation disk [Tutorial]

Download the final iOS 11 firmware file

We’ve covered this before. Just follow this link: Download: iOS 11.4.1 IPSW for iPhone, iPad and iPod touch, download the firmware file compatible with your device and save it to your desktop. Downloading will take some time, as the iOS 11 firmware file weighs a couple of gigabytes. At this point, it’s best to grab a coffee while the download is going on.

Preparing for the update

Updating for the iPad requires preparation. Both in terms of knowledge and in terms of actions to be performed.

First we should familiarize ourselves with the iPad models and the latest versions of the operating system for them (the number corresponds to the generation):

  • iPad 1. iOS 5.1.1;
  • iPad 2. iOS 9.3.5;
  • iPad 3. iOS 9.3.5;
  • iPad 4. iOS 10.3.3;
  • iPad mini 1. iOS 9.3.5;
  • iPad mini 2. iOS 12.2;
  • iPad mini 3. iOS 12.2;
  • iPad mini 4. iOS 12.2;
  • iPad Air 1. iOS 12.2;
  • iPad Air 2. iOS 12.2;
  • iPad Air 2. iOS 12.2.

All other tablet models can be upgraded to the latest version. For example, iPad Pro 12.9 and 11 (2020 and 2018).

Back it up

After updating the operating system (if it is a global reflash), all user data will be lost. Therefore, you need to back up your data. You can do this through the cloud service iCloud, or on your computer through iTunes.

Step-by-step settings for backing up via iCloud:

  • Open Settings on the tablet.
  • Go to iCloud, if the operating system version is before iOS 10. If the device is updated to iOS 11 or iOS 12, this section is opened through the account name item (usually the owner’s first and last name).
  • Tap on the “Backup” tab.
  • Follow the instructions on the screen.
  • Install the iTunes program on your computer. You can download it from the official website.
  • Connect your device to your computer via USB cable.
  • Enter the lock code if it is installed.
  • Run the program on your PC.
  • Choose your iPad from the list on the left.
  • Click on “Backup now.”.

Charge your tablet fully

The battery power will be actively consumed during the update and the device must never be allowed to shut down. I recommend charging your device fully before you update. Preferably up to 100%.

Make sure you are connected to Wi-Fi

The new operating system will be downloaded via the internet, so make sure you have a stable wireless internet connection. You may also use mobile Internet if your tablet is equipped with the appropriate module.

See also  How to find out the iPad model by serial number

New models with a SIM-card slot are prefixed with Cellular. A large update can weigh from 3 to 6 GB, so there should be enough traffic.

Free up space

Since the new version of the operating system occupies internal memory, it must be previously freed. I recommend to clear a lot of space at once, about 10 GB.

If a message appears telling you there is an update, click Install Now. You can also do the following:

  • Connect your device to power and connect to the internet with Wi-Fi internet.
  • Tap on Settings General Software Update.
  • Click Download and Install. When prompted to temporarily uninstall programs because iOS needs more free space to update, click Continue or Cancel. After updating the OS, iOS will reinstall the deleted. If you press cancel, find out what to do next.
  • To start the update, click Install. Or you can click later and today install or Remind Later. If you click install today, just connect your iOS device to the power before you go to sleep. Your device will automatically update overnight.
  • If prompted, enter your password. If you don’t know your password, what to do.

If you see an error or need more space when wirelessly updating

If you see an error message when you try to update your device wirelessly, what to do. If you need more space to update over the wireless network, you can update using iTunes or manually remove content from your device. If you use iTunes or update wirelessly, you will have the same amount of free space on your device after the update.

Some iOS software updates are not available wirelessly. VPN or proxy connections can prevent your device from contacting iOS operating system update servers.

If a message appears telling you there’s an update, click Install Now. You can also perform the following steps:

  • Connect your device to power and connect to the internet with Wi-Fi internet.
  • Tap Settings General Software Update.
  • Tap Download and Install. If a message appears saying you need to temporarily delete apps because iOS needs more free space for the update, click Continue or Cancel. After the update, iOS will reinstall the deleted. If you click cancel, find out what to do next.
  • To start the update, click Install. Or you can click later and install today or Remind Later. If you click today install, just connect your iOS device to the power before you go to sleep. Your device will automatically update overnight.
  • If prompted, enter your password. If you don‘t know your password, what to do.

If you see an error or need more space when the wireless update

If you see an error message when you try to update your device wirelessly, what to do. If you need more space to update wirelessly, you can update using iTunes or manually delete the content from your device. If you use iTunes or update wirelessly, you will have the same amount of free space on your device after the update.

Some iOS software updates are not available wirelessly. VPN or proxy connections can prevent your device from contacting iOS operating system update servers.

If an update message appears, click Install Now. You can also perform the following steps:

  • Connect your device to power and connect to the internet with Wi-Fi internet.
  • Tap Settings General Software Update.
  • Click Download and install. If a message appears telling you to temporarily uninstall programs because iOS needs more free space for the update, tap Continue or Cancel. After the update, iOS will re-install the deleted. If you click cancel, find out what to do next.
  • To start the update, click Install. Or you can click later and install today or Remind Later. If you click install today, just connect your iOS device to the power before you go to sleep. Your device will automatically update overnight.
  • If prompted, enter your password. If you don’t know your password, what to do.
See also  It does not turn on iPad after a long non-use. Top reasons why iPad does not turn on

If you see an error or need more space when the wireless update

If you see an error message when you try to update your device wirelessly, what to do. If you need more space to update wirelessly, you can update using iTunes or manually remove content from your device. If you use iTunes or update wirelessly, you will have the same amount of free space on your device after the update.

Some iOS software updates are not available wirelessly. VPN or proxy connections can prevent your device from contacting iOS update servers.

The first and probably the most basic rule when installing iOS 11 is to back up your data. It is desirable to perform reflashing of iPhone and iPad after making a backup, then you will have no reason to worry about lost photos or deleted messages.

It’s easy to do, just connect your mobile device to iTunes on your PC. In the “Overview” tab, in the “Backups” section, click on “Make a copy now” and a backup will start right away. Now that all the copies are made, you can proceed to reflashing.

First, you need to download a special developer profile, without which you will not be able to switch to the developer version of iOS 11. Use this link to get the profile, but only in Safari. After that, you will be asked which device you want to install the profile on. After selecting the iPhone, the user enters the “Profile Installation” menu: here, of course, it is necessary to press “Install” and agree with all the subsequent requirements of the smartphone.

After restarting your iPhone, you need to go to the main “Settings” and select the “Software Update” item. If all previous steps have been performed correctly, the system will detect the presence of a new version of iOS. By the way, it takes about 30 minutes to download and install the update.

Clean your device

Before installing iOS 10 it makes sense to part with unused games and applications. This measure is not mandatory, but it never hurts to get rid of unnecessary software before installing a big update. Deleting software from your device, you do not lose anything. you can restore any application from the App Store.

In general, preparing for an update is a great opportunity to clean up your device. Unnecessary applications were mentioned above, but you can also remove temporary files, cache, web browsing history, cookies, logs and other junk. You can learn more about this in the articles:

Using the proposed software you can free up from 500 MB to 5 GB on your iPhone and iPad in a couple of minutes.

BYRGPUB.COM 2022