Why the Apple Watch does not connect to the iPhone 5s and iPhone 6

So now many iPhone 5s and iPhone 6 users, who have in their possession the Apple Watch, updated to watchOS 6, are banally unable to use the watch. This problem applies both to new watches that Apple continues to make and sell even on its official website, such as the Apple Watch Series 3, and to those that were already purchased before the update was released. In just a week we’ve received about a dozen emails from readers who, not having found an answer from Apple, come to us for help. But how can we help them? Unless Apple appeals to common sense.

Yes, Apple hasn’t released iOS 13 for the iPhone 5s and iPhone 6 because their software support deadline is out. Of course it is. One has received all the operating system updates for six years, and the other for five. For smartphones, that’s more than enough. But what does this have to do with the Apple Watch, whose owners continue to depend on outdated smartphones, which until two weeks ago were quite up to date to power the watch? Reminds me of the story from the tale of the Brave Tailor, who boasted about killing seven people with one punch.

I would not like to make premature conclusions, but it seems obvious to me that we are faced with nothing more than a banal consumer fraud, for which the Russian Administrative Code provides for a very real penalty. At any rate, as far as users who have recently purchased an Apple Watch are concerned. They have been misled by Apple about the consumer properties of the product they purchased, which means that the truth is on their side.

Apple Watch doesn’t connect to your iPhone? What to do

Your Apple Watch won’t connect to your iPhone? This problem occurs frequently, but in most cases it can be solved in a couple of minutes.

The Apple Watch is an iPhone accessory, and the Smart Watch works best when you have a smartphone connected. Connection problems can occur for a variety of reasons. Sometimes this is caused by system bugs, which can be fixed by resetting or rebooting.

Below we’ll talk about different ways to fix Apple Watch iPhone connectivity issues. The tips below apply to all Apple Watch models with any version of watchOS.

How To FIX Apple Watch Not Connecting To iPhone!

Check the connection on the Apple Watch

The first thing to do is to check the connection on your Apple Watch via Control Point. Swipe up from the bottom edge of the Apple Watch screen to open the Control Panel. If you see a green iPhone icon, it means your smartphone is connected to the watch. If the icon is red, there is no connection. Try bringing your smartphone closer to the watch to connect it. Also make sure the watch has Wi-Fi turned on.

Reboot your Apple Watch

If the problem is still unresolved, it may be caused by some system bug. Fixing it will help with a simple Apple Watch reboot. Press the Apple Watch side button to bring up the shutdown menu. Swipe the slider to turn the watch off. Then turn on the Apple Watch by pressing the side button again. Now try reconnecting it to your iPhone.

Do an Apple Watch reset

In some cases, a simple reset isn’t enough and you need to reset your Apple Watch. To do this, go to the Basic Settings on your Apple Watch and at the very bottom select Reset. This will erase all content from your Apple Watch, and you’ll have to set it up again.

Unlink your Apple Watch from iPhone

You can try unlinking your Apple Watch from your iPhone if the methods above don’t work. This is essentially the same as a reset. Both methods will erase all content from the watch.

After that, you’ll need to reconnect your Apple Watch to your iPhone via the same app. You’ll then be able to restore your data from the copy or set up your watch like new.

We hope some of the above methods helped you solve your problem. If it’s not solved, we suggest you contact a professional. The watch may need repair.

iphone, does, apple, watch

Notifications don’t show up

You usually see notifications on your smartphone screen, but only until it is locked. Otherwise, notifications will be sent to the watch, but if they’re not there, it’s likely the watch is also locked or “Do Not Disturb” mode is on.

If you have set a password for your watch (via your smartphone), it will automatically lock when you are not wearing your watch, as well as when you lose contact with your skin and when you charge it. Remove the password, or tighten the strap tighter. Forgot password? Have to reset the watch completely. To do this, launch the Watch app on your smartphone, select “My Watch” “Basic” “Reset” “Erase all content and settings. In cases where the watch was not connected to your smartphone, you need to use these instructions.

Sometimes the reason for no notifications is “Do Not Disturb” mode, which is indicated by a crescent moon icon on the screen. From the watch’s Settings menu, select the crescent icon and tap it to turn off mode.

Try connecting the Apple Watch and iPhone again

How to fix Apple iPhone XR that doesn’t connect or sync with Apple Watch after iOS update [Troubleshooting Guide]

Connecting iPhones to smart watches is now becoming a trend. The new iPhones are designed to pair and sync with different types of smart watches, whether it’s the Apple Watch, Fitbit tracker or other smart watches. The synchronization process between these devices is usually done via Wi-Fi and Bluetooth. Thus, enabling these features is a prerequisite to get started. The general pairing process is simple. However, encountering synchronization problems is inevitable.

Below are possible solutions to the corresponding problem on the iPhone XR and Apple Watch after installing iOS version 12.1.4. Read on to find out what to do if your iPhone XR doesn’t sync or connect to the Apple Watch after an iOS update.

For owners looking for a different problem, check out our troubleshooting page, as we’ve already covered some of the most common problems with this device. Look through the page to find problems similar to yours, and use the solutions we offer. If it doesn’t work or you need more help, feel free to contact us by filling out our iPhone questionnaire.

Apple Pay doesn’t work on the Apple Watch? How to fix it

Sometimes the Apple Watch may not work with Apple Pay. Some users don’t display the “Bring your device to the reader” message when they bring their Apple Watch to the payment terminal.

With Apple Pay you can pay for your purchases in stores and beyond by holding your Apple Watch up to the terminal. It’s very fast and convenient.

Apple Pay is one of the most popular mobile payment systems. It is available in 70 countries. Many stores, apps, and sites accept Apple Pay. Because of this feature is very important to the Apple Watch.

If your Apple Pay payments don’t work on your Apple Watch, we’ll try to help. First of all, it is worth finding out what the problem is. Answer these questions:

  • The problem occurs only in some stores or only online? Then the problem may be in the store or on the site itself and it may be worth contacting support.
  • The problem occurs only with a specific card? Then the problem is with the card. Contact your bank’s customer service.

Now let’s tell you how you can solve problems with Apple Pay on the Apple Watch.

Reboot the Apple Watch

Reboot your Apple Watch and try again. To do this, hold down the side Smartwatch button and swipe the shutdown slider. Wait 30 seconds and then turn the watch on by pressing the side button. It also does not hurt to restart your iPhone.

iphone, does, apple, watch

Update your system

On your iPhone, go to “Settings” “Basic” “Software Update”. If there is a system update available, download and install it.

On the Apple Watch, go to “Settings” “Basic” “Software Update” and also download the available update. You can also use the Apple Watch app on your iPhone to update your Smart Watch system.

Add your card again

If the previous methods didn’t work, we suggest deleting your card from your Apple Watch and adding it again.

On the Apple Watch, open the Wallet app and select your card. Click “Delete” and reload the Apple Watch.

To add your card again, on your iPhone, open the Apple Watch “My Watch” Wallet and Apple Pay app and follow the on-screen instructions.


Some users have reported that their Apple Pay feature stopped working after turning on AssistiveTouch on the Apple Watch. Available on the Apple Watch SE, Apple Watch Series 6, and newer models.

On the Apple Watch, go to “Settings” “Universal Access” AssistiveTouch and disable the feature. If the feature wasn’t turned on, turn it on and turn it off right away.

If you are not getting notifications, messages or calls on your Apple Watch, Apple Watch and iPhone cannot be linked. When your devices disconnect, or appear on your watch face. You can also check your connection in the Control Center. When your Apple watch connects again, appears.

If you need help, try the steps below. After each step, see if your devices can connect.

What to do if the Apple Watch doesn’t work after updating your iPhone to iOS 13

After updating your iPhone to iOS 13 (and installing watchOS 6 on your watch), many people have had trouble sending notifications from your phone to your Apple Watch. Nothing surprising in this (after all, the first beta version, sorry), but we want to use the watch, but it turns out that they can not create a “reliable” pairing with the iPhone.

We found a solution to this problem in the Apple Developer Forum, but you will have to take some pretty drastic measures.