What to do if the home button does not work on the iPhone and iPad after upgrading to iOS 15

One of the usual problems that the iPhone and iPad happens, the home button does not work on the iPhone 4 / 4S / 5 / 5S / 5C / 6 / 6S / SE / 7/7 Plus or the home button does not respond to pressing and clicks. And today we find out why the home button does not work on the iPhone, what to do if the Home button in the iPhone or iPad does not respond to pressing, and how to restart the iPhone if the Home button is well pressed.

HOME button repair methods

Suppose that in your iPhone, the Home button is hired, sometimes sticks, sometimes you need to press this control a few times to respond to the device. What methods can restore the operating status of the “Home” button?

  • HOME button calibration;
  • Adjustment of the position of the connector;
  • Cleaning the contact site and grease mechanism;
  • Replace the button on the program level.

Consider each of the specified methods in more detail.

HOME button calibration

In order for the main mechanical control body in the iOS-device to become obedient to respond to each press, follow these steps:

  • Run on the iPhone any native (regular) application included in iOS. It may be the weather, calendar, shares or any other;
  • Press and hold the POWER button before the device shutdown slider appears. Release Power;
  • Press and hold HOME while the shutdown slider will not disappear. Ready!

Practice shows that the actions described above help only a small number of users of iOS devices, but still the method has the right to life.

  • Connect to the iPhone standard USB cable;
  • Put your finger under the plug inserted into the connector;
  • Gently press the plug in the “bottom-up” direction and click on the Home button. If the button starts to work, in no case do not push more, it will not help, but can lead to a mechanical breakdown of the connector. The effort should be small and this is enough.
  • Apply a little means on the Home button;
  • Several times, consistently press the button (Up to 15 clicks may be required) While the tool does not penetrate into the gap between the button and the protective glass of the iPhone.

Be careful, WD-40 has high fluidity and easily penetrates even the smallest gaps, if you act too much, it can penetrate the gap between protective glass and touch panel and leave fat stains.

In order to clean the contact pad and the gap between the button and the glass, you can use the usual alcohol, for this:

  • Apply a little alcohol on the surface of the button to the gap area throughout the perimeter;
  • Press home several times (up to 10 times);
  • Wait until the alcohol evaporates, it usually takes no more than 2 minutes, and you can check.

In the overwhelming majority of cases, the actions described above will help return to life a faulty HOME button, but if your device or separately, its button is damaged mechanically (the traces of damage, there is no button), to solve the problem with lubricant, clean and calibrate the button will not be able to solve. But in this case, the exit is 2:

Duplication of the Home button on the program level

If the Home button is damaged in your device and does not manage to solve the problem with your own hands, you can contact the service center, the guys will repair or replace the button, but it will cost about 100 and 2-3 days. But it is not necessary, in IOS there is a wonderful function. Assistive Touch, which allows the program level to replace HOME, or rather assign its functions to the simple tap on the iPhone or iPad screen.

See also  How to turn off the camera sound on iPhone 7

Partly AssistiveTouch capabilities We have already affected the instructions “”, but the function is much more promising and allows you to completely replace the HOME button functionality.

  • A translucent icon appears on the display, the tap on which opens a function menu, allowing you to control the iPhone or iPad without using the mechanical controls of the POWER and HOME buttons, the volume controller.

You can use AssistiveTouch from any application, from the Home screen or Lock Screen. In the mechanical buttons with the AssistiveTouch need no need at all.

In the list of frequent problems with iPhone disabled Power or Home buttons occupy one of the first places. This face many users. In most cases, the device must be given to repair, but sometimes the problem can be solved on its own. It is important to know why the button does not work on the iPhone, and what to do in such situations.

The POWER key fault is related to many reasons:

  • Phone damage. Fall, pollution, water entering, other types of mechanical exposure.
  • Motes with loop.
  • Estimation after strong press.
  • Operating system errors.

Use the phone with an inactive POWER key, despite the big inconvenience, you can. There are several simple ways to enable or how to turn off the iPhone in such conditions:

  • You can enable the phone by connecting the USB cable gadget to the outlet or PC;
  • You can turn off the device using the Assistive Touch function, select the “Screen Lock” menu, where the “Shutdown” function is located.

Troubleshooting: 4 ways to solve problems

There are several options for restoring the mechanical control body in the iPhone. Procedures will eliminate sticking and incorrect responses due to the contamination of the mechanism or software conflict.

Software Calibration

The method is designed to restore the responsiveness of the button on pressing using standard iOS applications. List of actions:

  • Turn on the smartphone and run an arbitrary application
  • Hold the POWER button until the device shutdown slider appears
  • Hold the HOME button for 5-10 seconds until the device disappears notification

Manual adjustment of the connector

You will need a regular USB connector connected to the smartphone. The procedure will allow to restore the position of the axial plate of the control body.

  • Insert the cable in the iPhone connector
  • Apply your finger from below to the USB cable plug
  • Careful movements, press on the plug from the bottom-up, while pressing the HOME button at the same time

If the press is triggered without delays and are accompanied by a soft click, the adjustment is successfully completed.

home, button, iphone, stopped, working, does

Mechanical component lubrication and contamination removal

Dust and small abrasive particles prevent the normal operation of the mechanisms and output mechanical elements. Special aerosols (WD-40) are designed to eliminate the problem. Appliances for the use of lubricant:

  • Apply 1-2 drops of aerosol around the “Home” button.
  • Make 10-15 continuous presses while the tool is distributed in the structure of the mechanism.

Important! Select no more than 2 drops of lubricant. An excessive amount is able to form fat divorces, which are not easy to get rid of.

home, button, iphone, stopped, working, does

Assistive Touch. HOME button duplication

If the mechanical components of the control body are damaged and cannot be restored, it will be necessary to replace the faulty item. The temporary solution of the problem is in the IOS operating system. the Assistive Touch application with the function of duplicating gestures and commands.

  • In the basic settings of the smartphone, select the section “Universal Access”.
  • Find the “Physiology and Motorika” item and activate the Assistive Touch feature.

The screen will appear the virtual analogue “Home Button” with the possibility of arbitrary movement. Also in the settings it is possible to add commands to certain gestures. The method is a temporary solution to the problem and will allow you to use a gadget to a trip to the workshop.

Ways to solve the problem depending on the cause of the failure

Malfunctions, due to which the Home button can start climbing, are divided into software and hardware.

See also  How to throw information from iPhone to a computer

Program failure

If the Home button works badly because of the software failure, the problem can be easily solved by calibration:

    Run any basic iOS application: “Watches”, “Weather”, “Calculator” and DR.

Run any basic iOS application on the iPhone

Mechanical damage and blockage

The problem with the Home button may occur and due to hardware faults.

Adactor position adjustment

To adjust the position of the standard connector:

  • Connect to the iPhone Basic USB Cable.
  • Put your finger under the plug inserted in the connector.
  • In the direction “Bottom-up” put on the plug and click on the Home button.

If the button does not start working, do not try to push stronger. This will only lead to the mechanical breakdown of the connector.

Cleaning the contact site

Special lubricants and cleaning agents, such as alcohol and WD-40 (“Wader”), will need for cleaning the button and surface. To clean the surface using the latter:

    Apply a little means on the button (it is very important not to “overdo it”, t.Fat stains may remain).

WD-40 can be used to clean the button and the contact pad

The same steps can be done using the usual alcohol, only after applying you should wait a few minutes until it evaporates.

This method of cleaning from the garbage of the IOS device is simple and fast. However, professional internal cleaning, which is extremely recommended independently, is considered more efficient.

If the button is damaged

If there are traces of damage on the button or the machine and there is no response of the Home button, then, most likely, damaged or disconnected the key connector. In this case, there are 2 outputs from the situation:

To make the Home button on the working screen:

  • Go to the “Settings” menu. “Main”. “Universal Access”. AssistiveTouch.
  • Activate AssistiveTouch.
  • Select Home.

ASSISTIVETOUCH activate to make the Home button on the working screen

One of the listed methods should help you solve the problem with the HOME button. If independent fix does not eliminate the problem, do not waste time and do not risk “breaking” the device, and contact the service center.

Subscribe to our channel in Yandex.Dzen

The iPhone does not work home button. calibrate it

To successfully calibrate the “Home” button, run any system application, such as Weather.

Hold the power button until the strip appears at the top with the information “Disable”. Then press and hold the “Home” button until the open application closes, and you are transferred to the SpringBoard

The HOME button does not work in the iPhone. use alternative

What to do if calibration did not bring improvements and you want to take responsibility to repair yourself.

Then you can display the virtual button home. To use this parameter, you must include one of the available features built into iOS.

It is called AssistiveTouch. To do this, select “Settings” “Main” “Universal Access” “AssistiveTouch”.

After activating this function, a translucent button will appear on the screen. If its location does not fit or overshadows another element under it, you can drag it to another screen location.

Pressing the button calls a menu where there is a virtual button home. Pressing it will work as pressing physical.

In addition, “AssistiveTouch” performs more tasks. There are additional buttons in the menu: “Siri”, “Center for Notifications” and “Management Center”, “Favorites” and others.

home, button, iphone, stopped, working, does

When you click on “Devices”, get access to the following parameters: Block or rotate the screen, turn off the device, adjust the volume and disconnect the sound.

You will also find the “Program Switch” and “Screen Snapshot” functions. The purpose of introducing the AssistiveTouch function was to simplify the use of the iPhone, for people who experience difficulties with touching the screen or pressing physical buttons, in particular “home”.

Therefore, some of the available functions from the menu allow you to replace them or enter your own algorithm.

Even in Apple devices there is something that something stops working normally, it is often displayed on the physical buttons.

Thanks to the AssistiveTouch function, you can partially solve the issue in case of problems with the home button.

Where to repair iPhone?

Even considering the relative simplicity of the design of the iPhone 6 and 6 Plus, when the mechanical button breaks, you should not try to eliminate the problem yourself. Each stage of disassembly and cleaning smartphones, repair and replace their parts requires maximum caution. Incorrect actions can lead to the final loss of working capacity not only the buttons, but also the device.

See also  How to reboot iPhone 11 pro

Thanks to its many years of experience, using the equipment required for repairing equipment and the presence of original spare parts for Apple smartphones, our wizards clear and replace the button and other details, saving the ability to use the print sensor. At the same time, the quality of work is provided by the proprietary guarantee, and the repaired iPhone will serve its owner more than one year.


Let’s start with the fact that from the 7th iPhone, the home button is no longer mechanical, as well as the moisture-protection according to IP67 standard. These factors led to the problem. After watching a huge amount of video with the names of the iPhone Water Resistance Test, where they were bathed at a depth of more than 11 meters without much, I decided that a simple wash with my seven soap would not hurt.

Soap I am not more than two days. It brought me a huge aesthetic pleasure. I really love Joni Quay and watched with great joy, as glass and aluminum lost their fingerprints hated me, and the water droplets were going to one big.

After a couple of months, I realized how much I was mistaken. At first, the touch id stopped working, then the button itself stopped recognizing the press and the water divorces appeared under the glass. Apparently, the fake speaker on the left of the charge port did not stand the water pressure from the crane. In the service, the phone was dried and earned everything except the button. Assistive Touch appeared on the screen, replacing the functionality of non-working buttons. By that time, the first beta iOS 11 was published and I, without holding it, rolled it. After reinstalling iOS Touch ID started working again! Why? I did not understand and with such a bewilder I lived half a year until the damned button stopped working again.

In this case, you can replace a button that is worth a couple of bucks on Ali. This is not the best option, as Touch ID is tied to the motherboard. The button itself will work, but the fingerprint scanner is not. You can buy a motherboard, which is usually sold with the button, but it is very expensive and there is a high risk to buy a used board with a locked ICloud or just killed.

The IPhone Activation process

Before turning on the iPhone, check if you have a suitable SIM card (Micro for old models and Nano for newer). Without SIM, activation will not succeed. You also need a wireless Internet connection (or cellular communication) or the availability of a computer with iTunes program (as a backup recovery option). And only after you make sure in all the listed steps, you can safely clamp the POWER button (or clamping the bottom key and the lock button on the iPhone 10 and above).

There are no legal activation methods without SIM! In versions of iOS 7 and above / Below, such a vulnerability really existed, but already starting with iOS 7.one.2 This was fixed.

Activation on iphone

For activation, only iPhone will be required, no more devices need. All you need is to fulfill the following actions:

    Insert the card into a special tray. The slot is on the side of the device, namely. on the right side (on completely old devices, starting from the first iPhone by type 2G, 3G, 3GS, the slot is at the top). The hole can be opened with a tool that comes with the device itself on the device turn. If there is no this device at hand, you can use a clip (do not open the tray using sharp items, such as needles, as it can lead to breakage). Insert the clip or the tool into the thin hole and remove the slot, then insert the suitable SIM card (remind, these are the dimensions of Micro or Nano);