When the VAIO inscription appears on the laptop screen, press and hold the “F2” key

The BIOS setup screen will be displayed.

On a note! If this does not happen, then restart the laptop and repeatedly press the “F2” key when VAIO appears again.

Without saving changed parameters

Important! BIOS settings need to be changed deliberately, so in which case you need to know how to undo all changes so that everything works as before.

  • To prevent the settings from being saved, press the “Esc” key.

Press the “Esc” key so that the settings are not saved

When a window appears with confirmation of the exit, click “OK” (or the “Y” key).

  • Go to the “Save Exit” (“Exit”) tab.

Then go to the line “Discard Changes and Exit” (or “Exit Discard Changes”). When a confirmation window appears, press “OK” (or press “Y”).

Select “Discard Changes and Exit” (or “Exit Discard Changes”) and click “OK” (or the “Y” key)

EscF2 combination

The developers explain the variety of options for opening BSVV (a set of microprograms) by installing different motherboards. For this reason, there is no single sign-on to open the device subsystem, it depends on the model number and year of manufacture Sony Vayo.

  • turn on the laptop;
  • when the inscription “vaio” appears on the monitor, press ESCF2;
  • after frequent pressing, the OS subsystem (operating system) settings tab will be displayed.

If the BIOS does not open, and the system continues to boot Windows, you need to “reboot” the device. To do this, we often and periodically press the ESCF2 buttons.

Without saving changes

Often the user needs to find out the system parameters, check the order of starting the product from a disk, flash drive, from a hard drive. To do this, he goes into the BIOS (Windows system settings subroutine).

  • open the laptop;
  • we go in one of the ways in the BIOS;
  • after viewing the information, in the main window select “without saving” (Exit Without Sawing, Quit Without Sawing);
  • a tab will open, you must specify Y / N, (yes or no);
  • press the button “Yes” (Y), then ENTER.

Attention! After pressing ENTER, the user will exit the BIOS without saving the changes to the system subroutine, and the laptop will continue loading the Windows OS.

Options when you don’t need to save your changes:

  • accidentally changed the wrong parameters;
  • uncertainty about the choice of changes;
  • there is no point in making changes.

The F10 and ESC keys are responsible for exiting the BIOS. To do this, go to the main page of the subroutine.

From the considered options for opening the BVVV of the Sony Vaio laptop, it becomes clear that the developers specifically change the input to the BIOS on different models. Trained specialists should be engaged in reinstalling the OS. You should always remember that by changing the parameters of the subsystem, there is an option to take the laptop out of the working state, after which a complete flashing of the computer will be required.

Hello, friends! In this article I want to show you how to enter the BIOS on a Sony vaio laptop and set the priority to boot from a USB flash drive or cd-rom. There are many questions on this topic, users cannot understand how to make the boot from a flash drive or cd-rom in the Sony vaio boise.

I want to note right away that the manufacturer Sony vaio does not stand still and laptop models are being upgraded, so the BIOS may differ slightly, but the essence remains the same. I will use an example to show BIOS Sony vaio, model PCG-71812V.

And so, to enter the Sony vaio BIOS, turn on the laptop and press the F2 key, if the BIOS is not displayed and the system starts to boot normally, then try pressing other keys F4, F8 or the Delete key.

On the Sony vaio PCG-71812V model, the F2 key is used to enter the BIOS. Let’s look at what menu items and settings this BIOS provides us.

The first section is Main. This section displays information about the BIOS version, serial number, RAM size. 4096MB, hard disk size. 500GB. The only thing that can be configured in this section is to adjust the time and date.

The next section is Advanced. There is only one tab in this section. Virtualization Technology. You can disable it (Disabled) or enable (Enable). To do this, press the Enter key and use the arrows on the keyboard to select the function. Disable / Enable, then press the F10 key and Enter.

The next section is Security. In this section you can set passwords.

Set machine password. Set the password when entering the BIOS Set user password. Set the password for the user Password when power on. Set the password for entering the system.

To set a password, as usual, select the tab on what you want to put the password on, press the Enter key and write the password. After all that has been done, press the F10 key to save the settings.

And so the most important and necessary section of the BIOS.

Enter BIOS on Sony

Fortunately, the Vaio models have a dedicated button on the keyboard called ASSIST. When you click on it while the computer is booting (until the OS logo appears), a menu will open where you need to select the “Start BIOS Setup” item. Also, opposite each item, it is signed which key is responsible for calling it. Within this menu, you can navigate using the arrow keys.

sony, vaio, boot, flash, drive

In Vaio models, the spread is small, and the correct key is easy to identify by the age of the model. If it is outdated, then try the F2 keys. F3 and Delete. They should work in most cases. For newer models, the F8 keys will be relevant. F12 and ASSIST (the features of the latter are discussed above).

If none of these keys worked, then you will have to use the standard list, which is quite extensive and includes these keys: F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, Delete, Esc. In some cases, it can be topped up with various combinations using Shift. Ctrl or Fn. Only one key or a combination of them is responsible for the input.

You should never exclude the option of obtaining the necessary information about entering the technical documentation for the device. The user manual can be found not only in the documents that come with the laptop, but also on. In the latter case, you will have to use the search bar, where the full name of the model is entered and various documentation is searched in the results, among which there should be a user’s manual in electronic form.

READ  How to enable second line on Samsung

Also on the screen when the laptop boots up, a message may appear with the following m “Please use (desired key) to enter setup”. by which you can find out the necessary information about entering the BIOS.

Sony is headquartered in Tokyo, a multinational corporation. For the happy owners of a Sony Vaio laptop, it sometimes becomes difficult to enable BIOS (OS subroutine) on Sony. Let’s consider several options on how to do this.

With the preservation of parameters

Many advanced users reinstall Windows OS on their own when:

  • it does not work due to a technical error;
  • there were violations in the event of a virus attack.
  • we go in one of the described ways;
  • standard settings are opened, where: serial number, BIOS version, etc.;
  • go to the “Boot” page;
  • set the required parameters of the startup priority, a laptop from a USB flash drive, from a disk;
  • save, press F10;
  • confirm saving by clicking “Yes”;
  • press ENTER.

Boot from USB stick or CD-Rom Sony Vaio.

To boot from a USB flash drive or cd-rom in BIOS, we need a Boot partition.

External Devise Boot. Boot from an external device

Internal Optical Disc Drive Internal Hard Disk Drive External Device External Device Network Network

Select the External Devise Boot tab with the arrow on the keyboard, press the Enter key in the drop-down menu, click Enable. In this way, we allow downloading from external devices.

Next, use the arrow on the keyboard to go down, select the External Device tab and now, not with the arrow, but by pressing the F5 key, raise this tab to the very top, thereby setting the boot priority from the USB flash drive in the BIOS. To boot from cd-rom, you need to select the Internal Optical Disc Drive tab and also use the F5 key to raise it to the very top, then the boot will be from cd-rom. After setting, be sure to save everything by pressing the F10 key Hope you understand!

The last section of the BIOS is Exit. There is definitely nothing to configure, everything is related to logging out and saving from the system.

Exit setup Get Default Values ​​- Exit and save the default settings Iscard Changes. discard changes Save Changes. Save changes Shutdown. Fault.

Well, that’s all my friends, I hope everyone understands how to enter the BIOS on a Sony vaio laptop and set the boot from a Sony Vaio flash drive. If you have questions and additions, be sure to write in the Комментарии и мнения владельцев, I will help everyone as much as I can. Good luck.

In certain circumstances, you may need to call up the BIOS interface, since it is used to configure the operation of certain components, prioritize boot (needed when reinstalling Windows), etc. The process for opening BIOS on different computers and laptops can be different and depends on many factors. These include the manufacturer, model, and configuration features. Even on two laptops of the same line (in this case, the Sony Vaio), the conditions for entering may be slightly different.

Examples of

Unfortunately, the mouse in BIOS does not work, so navigation is carried out only using the keyboard: arrows are used to move, and the Enter key is used to select a specific parameter. For a better understanding of how the BIOS works, let’s see how to change the boot priority in two different interfaces.

Vaio boot from USB stick

Good afternoon! I caught an idiotic ransomware banner, you need to boot from the flash drive and run the Kaspersky utility. But here’s the problem: I can’t enter the BIOS. The well-known keys (F1, F2, etc.) don’t help, and besides, when you press the Assist key, this stupid window pops up and you can’t select anything. Tell me how to get to the BIOS or to the Boot menu after all.

Sony Vaio Ultrabook SVT131A11V, OS. Windows 8.

Those. such options: 1. Hold F2 and press the power button. 2. Hold down assist and press the power button. 3. Press successively Esc, F2, power button.

MakovThe screen goes out and the power button is on. Just about. it was so set up! Turn it off, otherwise you take him to sleep every time. After troubleshooting, configure the button normally. to shutdown the laptop.

I now have 8, but the file system is fat32. I also found this opinion on the forums:

“To get into the BIOS at boot, we need to press F-2, on the first tab-Main we have nothing to do and using the arrows on the keyboard go to the Boot tab

And here we see the first item External device Boot (boot from an external device) is disabled (Disabled), put it in the Enabled position, select with arrows, press Enter and select Enabled

Now the Boot Priority item or the choice of a priority device for booting the computer, now we have a Hard Disk Drive. a hard disk, select this first item and press Enter

In the drop-down menu, select External device or, in other words, an external boot device, press Enter, right now we have installed a laptop boot from a USB flash drive

Go to the Exit tab, when asked to save changes before rebooting, we answer Yes

Phoenix78Yes, this banner says that you have caught a virus.We guessed it. Only this is nonsense.

Makov no access to system drives. for some reason I don’t see themAnother virus could have been.

MNB Yes, I am loading from this Kaspersky disk. As far as I understand, the main problem is that the hard disk is not visible through all programs. that through Kaspersky, that through the Live CD Win XP. how to make them see each other?

And on ubuntu you will not throw a link? I just never used it in my life and I don’t even know what to download.

In general, I downloaded ubuntu, burned it to disk, try to boot from it. the process is in progress, and then an error: ubuntu unable to find a medium containing a live file system

As for the BIOS. there is such a BIOS that you can not configure anything in it at all. there are practically no settings. it turns out that this is so? or somehow you can go to the “full version” of the BIOS?

Booted from alkid live dvd but there is no screw in Explorer!!

By the way, I hope the laptop does not run on a battery all the time, but is constantly connected via an adapter to a 220V network?

MNB No, the laptop is plugged into the socket) And what does it matter?

We’ll have to pull the HDD out of it, there is no other way?

And those programs, for example, dmde and so on will see too.

What has been done: 1. Attempting to boot from a USB flash drive. in both uefi and legacy. error “operating system nou found”. 2. Booting from CD (DVD). boot only in legacy mode, but the hard disk is not available in all programs (Kaspersky, anti-SMS, live cd operating system, Dr. Web)

Yes, the check by Kaspersky did not end with anything. You still need to do this in the laptop. AntiSMS did not start. 3. Didn’t load.

I only need an answer to one question: WHY IS NO HARD DISK SEE? Although he is in good health. In the search, I somehow came across the opinion that some other drivers for the HDD need to be slipped when you make an image on a USB flash drive or CD. Do you know anything about it?

MNB Yes, that’s what I do. Only then on the flash drive the image file, and not folders and files. This is fine?

Still, I only need an answer to one question: Which one does not see the hard drive. Why. This is all Vaio can see such garbage. that’s the whole problem. We must answer this question.

READ  How to Recover Deleted Contacts on Honor Phone

We must answer this question

Makovand then a mistakeWhat writes something?

Makov I just noticed. there is this unfortunate secure boot, disable it. And turn on uefi.

Quote: MNB: MakovI have not tried it with the adapterAnd when. things are not in the screw, but in the laptop itselfWhile the theory.maybe some drivers are missingLet them write. Yes, it seems that you yourself do not know what you are advising. Read here: http: //forum.kasperskyclub.ru/index.php? Showtopic = 38214

It’s about the wood. I need to integrate firewood for the hard disk on a USB flash drive or CD so that it can be “seen”. Forget about the BIOS, there are no settings there. Therefore, if you know, then please explain where to get firewood and how to integrate them into the assembly with Kaspersky. I don’t need anything else.

I do not know why you did not try from the adapter if you wrote that the disk is visible there.

MNB Yesterday I checked the entire disk with Kaspersky, taking it out of my laptop, found a couple of Trojans, but then inserted it, started Windows. and again this error sge65 Yes, I did it all a hundred times.

I tried Windows Defender Offline today, it gave the following error: The Windows system drive could not be found. This could be due to missing drivers, disk encryption, or damaged Windows installation. Error code. 0x8004cc01

@diksrv @MakovBefore buying Vaio I thought for a long time. I bought 2 vaio in a row: VPC F13S1E SVS1511C5E. I am satisfied with both, each in its own way. As a programmer I understand compatibility problems, so I _NO_ even try to use third-party developments for managing and administering the system. Before interfering with the system, you need to know about the “bells and whistles” that are used in Vaio and in modern hardware (uEFI, etc.), _NO_ ignore the manufacturer’s recommendations for caring for the system’s performance.

For example, at the first opportunity I simply changed the entire disc, putting aside the original one and made 2 more copies of the DVD recovery. As a plus, I have already performed a full system restore 2 times due to problems of not a simple migration to Windows 8.

I am sure you will still like Vaio if you use it in accordance with the manufacturer’s recommendations.

I wish you to quickly overcome your problems and follow the recommendations of the manufacturers further. Manufacturer’s website and technical support to help you.

MNB Everything is cool now)) I checked it from Windows before !! And now I booted from the disk and connected the hard one from the laptop via an adapter via USB. The conclusion is this: if such garbage occurs, you need to pull out Hard and check it on another PC or laptop. nobody is insured. Therefore, the only sure way out is to buy a normal laptop while they are still there. what kind of BIOS is this, where there are no settings? A hundred times I tried to boot from different disks, flash drives. it does not see the hard drive and that’s it. I have nothing against Sony, they produce a lot of very good equipment, but they obviously overdid it in laptops.

I rebooted it three times and got out again. Unscrew the hard disk again, pull it out. And what for I need such a laptop asks. In short, Windows 8 and Vaio are complete shit.!

Buy a new disk, put in a clean system (take the drivers on the vaio website, they will help you with advice on the forum). Then you will be able to migrate from the data from the original connected external. BIOS operates in uEFI mode with a new type of disk partitioning GPT, so the work with disks has become different from the previous generation of computers.

sge65I am sure you will still like Vaio if you use it in accordance with the manufacturer’s recommendations.

I wish you to quickly defeat your problems and follow the recommendations of the manufacturers. The manufacturer’s website and technical support will help you. It’s crap, not tech support. Do not enter BIOS. I can’t get the code for two weeks already. Super experts do not even know that there are two different ways 1-with a 16-digit code, and the second is just 7-8 characters. I have a second, endlessly asks for a 16-digit one. I even sent screenshots after 3 incorrect entries. I went to the service. We took 1200 for diagnostics and the heels of the unscrewed screws. I asked BIOS to update. Specialist. why do you need a BIOS? I thought to change the date in the settings, set the native ide. Does not support ACPI. Neither install nor restore the system. Run from Vio, as if from a terrible dream. Turned off the power. hello, shame again 2001.

Автоматическая загрузка с флешки. BIOS. Ноутбук Sony Vaio.

How to install Windows 7 from a USB flash drive on a Sony Vaio laptop

How to install Windows 7 from a USB flash drive on a Sony Vaio laptop

The main obstacle that arises when trying to carry out such a procedure is a black background with a command in the upper left corner. In addition, it is worth considering that not every series of Vaio models can migrate to Windows 2007. You can install this OS on the following series: SVF14, SVE15, SVF15, SVP1121, SVE17, SVP1321, SVS15, SVS13.

You can entrust this procedure to the professionals at the Sony laptop repair service center.

Reinstalling Windows on Sony Vaio

Reinstalling the operating system on Sony Vaio laptops is fundamentally the same as on other computers. However, there are several pitfalls with entering BIOS and booting from an external device. But first things first.

First you need to create an installation flash drive (you can use an existing OS disk). In the case of Windows 8 and Windows 10, the media will automatically become bootable when the system image is downloaded to it. During the download process, you should take care of creating backup copies of important data from a local disk, but which OS is installed.

After completing all the preparatory work, you should disconnect all other media from the computer, leaving only the installation flash drive or optical disk, and then turn off the laptop.

How to Booting Your Sony VAIO Laptop from USB External Devices

How to boot from a USB flash drive

Consider how to boot from a USB flash drive to install Windows or restore the system.

Boot from USB stick or CD-Rom Sony Vaio.

To boot from a USB flash drive or cd-rom in BIOS, we need a Boot partition.

External Devise Boot. Boot from an external device Network Boot. Boot over the network

Internal Optical Disc Drive Internal Hard Disk Drive External Device External Device Network Network

Select the External Devise Boot tab with the arrow on the keyboard, press the Enter key in the drop-down menu, click Enable. In this way, we allow downloading from external devices.

Next, use the arrow on the keyboard to go down, select the External Device tab and now, not with the arrow, but by pressing the F5 key, raise this tab to the very top, thereby setting the boot priority from the USB flash drive in the BIOS. To boot from cd-rom, you need to select the Internal Optical Disc Drive tab and also use the F5 key to raise it to the very top, then the boot will be from cd-rom. After setting, be sure to save everything by pressing the F10 key. After rebooting, in some cases, in order for the download to start from a flash drive or cd-rom, you need to briefly press any key. I hope it is clear!

The last section of the BIOS is Exit. There is definitely nothing to configure, everything is related to logging out and saving from the system.

Exit setup Get Default Values ​​- Exit and save the default settings. Viscard Changes. cancel changes. Save Changes. Save changes. Shutdown. Malfunction.

Well, that’s all my friends, I hope everyone understands how to enter the BIOS on a Sony vaio laptop and set the boot from a Sony Vaio flash drive. If you have questions and additions, be sure to write in the Комментарии и мнения владельцев, I will help everyone as much as I can. Good luck.

READ  How to enable sound mode on Samsung

Sony Vaio laptop repair in 1 day

Order a repair in our service center, and you will receive a working device on the same day, with a guarantee up to 1 year

Find out the exact time and cost of repairs Thank you, no need

How to boot from a USB flash drive

Insert the bootable USB stick into the USB port and restart your computer. Your main task at this stage is to change the boot priority so that the flash drive starts up first, and not the hard drive. This is done in two ways:

The first method is much more convenient, since it does not require the subsequent return of the boot from the hard disk. You just need to select a device (DVD or USB) from the list to start booting it and press Enter. It looks something like this:

Press F10 and get into the boot menu:

However, on some older computers, the Boot Menu does not start, so just in case, let’s take a closer look at how to change the boot priority through the BIOS. Expand the Start menu and restart your computer. When the logo appears, you must press a certain key.

On some motherboard models, not Delete is used to enter the BIOS, but another key. F1, Esc, F10, Ctrl Alt S. A reasonable question arises. how to find the right button? There are several ways:

  • Find on the Internet information about entering BIOS for your motherboard.
  • Read instructions from the motherboard manufacturer.
  • Pay attention to the message that appears immediately after turning on the computer. This message looks like “Press…. to run setup “. Instead of an ellipsis, a specific key (Del, F1, Esc) will be indicated, pressing which starts the BIOS.

Boot from a Sony Vaio laptop flash drive

For models that support booting from a USB flash drive in BIOS, as a rule, the sequence of actions is similar (if not the same) and looks like this:

Turn off your computer if it is running Enter BIOS. during boot, press the F2 key (before the transition to loading the operating system) Using the arrow keys, go to the Advanced tab Opposite the External Drive Boot item, select Enabled On the Boot tab, select the desired USB Device. our flash drive so that it is higher in the boot list than the internal hard drive Before exiting the BIOS, you should save the changes. Save Changes

Booting VAIO Notebooks from USB External Media

You can boot your Vaio laptop from a flash drive, like an installation (optical) disc, or even a USB floppy drive (yes, a floppy disk) using the BIOS. Connect the USB device to a powered off computer, and press the power key. During boot (before the VAIO logo appears), press the F11 key. the boot process from the external drive will begin. If the download does not start, you should turn off your computer and turn it on again. If the device requires additional power for operation, make sure that it is connected.

Download Sony Vaio Windows 10, 8.1, 8

Press the Assist key, boot into VaioCare mode. After downloading. select the item Start from Media [F11]

! Please note that some devices may not be compatible with Vaio notebooks.

Which key is used to go to the Boot Menu on Sony Vaio laptops (Windows Vista, Windows XP)

Press Esc 2 times. after the first press, the logo is hidden, after the second. Sony boot menu appears.

Manufacturer Models Go to Boot Menu BIOS / UEFI key Boot order
Sony
VAIO Duo, Pro, Flip, Tap, Fit Assist button assist button
VAIO, PCG, VGN F11 F1, F2, F3
VGN Esc, F10 F2 BIOS “BOOT” section, “External Device Boot” enabled

If the laptop supports booting from USB media “out of the box”, then you should look in the BIOS

If the laptop does not support booting from a USB flash drive how to boot from a USB flash drive

For some Sony Vaio models, the proprietary BIOS only supports booting from USB-floppy and CD-ROM / DVD-ROM optical drives, and since the USB flash drive is recognized as a hard disk, it will not work to boot from it.

USB Boot Models

71811M SVF1521B1RW SVF152A VGN-AR11SR VGN-AR71MR VGN-FS115ZR VGN-FS215ZR VGN-FS315ZR VGN-NR110E VPCZ1

Posted on Friday, June 3rd, 2016 at 20:55 pm in the following categories: Uncategorized. You can subscribe to Комментарии и мнения владельцев on this post via RSS 2.0. You can leave a comment. Ping disabled.

a comment on the entry “Sony Vaio loading a laptop from a flash drive

I tried to boot from a USB flash drive several times. Didn’t even boot from a liveCD on a Sony vgn-fs115ZR laptop. However, since the tenth time, the CD-ROM still managed to look at the boot disk. Taking this opportunity, I would like to thank you for the article about installing Windows 7 on Sony Vaio VGN-FS115ZR. I put a seven on an old laptop. flies!

How to enter BIOS on a laptop Sony VAIO sve151j11v?

Hi. F2 button or on new laptops the Assist button.

How to boot from a USB flash drive without BIOS?

If the boot menu is not available, press the DEL key at boot and enter the BIOS, then go to the Boot tab. select our flash drive and without releasing Shift, click on. this moving our flash drive to the first position. Press F10 to save the settings, the settings are saved and the laptop boots from the flash drive.

How to Boot from USB 3.0 drive on a VAIO Laptop

How to enter Boot Menu on MSI laptop?

Other laptop and motherboard models

  • HP AiOs and Notebook PCs. F9 or Esc followed by F9.
  • Dell Laptops. F12.
  • Samsung Laptops. Esc.
  • Toshiba Laptops. F12.
  • Gigabyte motherboards. F12.
  • Intel motherboards. Esc.
  • Asus motherboards. F8.
  • MSI motherboards. F11.

How to install Windows from a USB flash drive on a Sony Vaio laptop?

How to install Windows 7 from a USB flash drive on a Sony Vaio laptop

  • Press the Assist button to start the rescue mode
  • Run BIOS settings.
  • Select Legacy Compatibility Mode.
  • Prioritize booting from a USB flash drive on a Sony laptop.

How to boot from a USB flash drive on a laptop?

We press the F12 key when loading and get into the boot menu of the laptop, there we just select our USB flash drive and load the laptop from the USB flash drive. If F12 does not work at boot, then press F2, less often F6 and get into the laptop’s BIOS UEFI, here we go to the Boot tab.

How to enter BIOS on a Sony VAIO Windows 10 laptop?

That is, to bring up the BIOS or the boot menu, hold down the Delete, F2, F10 or Esc key immediately after pressing the laptop power button when the manufacturer’s logo appears. Press and hold, try one by one. it didn’t work. we reboot from the button and try with another key.

How to enter the Boot Menu on a Sony VAIO laptop?

And the launch of the Boot Menu on Sony VAIO laptops is carried out using F12. Also, for convenience, buttons for entering the BIOS are written. If for some reason you cannot open the Boot Menu, you can always change the boot priority of devices in the standard way. through the BIOS.

How to boot from a USB flash drive?

The classic method of organizing the download also works:

  • Connect the USB device before starting the computer.
  • Go to the BIOS menu, section “Boot” (Buttons Del, F2, F12).
  • Put in the first place Boot from USB or the name of your flash drive.
  • Save changes before exiting.
  • Start your computer.
BYRGPUB.COM 2021