How to connect Sony Bravia TV to the Internet via Wi-Fi

Question “How to connect Sony Bravia TV to the Internet via Wi-Fi?”For many users, still remains open and relevant. In order to properly connect your TV to the World Wide Web, you can contact our Sony TVs to the Service Center. You can also use our instructions, where the whole process is painted.

To begin with, you need to find out if the Sony Bravia model has a built-in Wi-Fi adapter or you need to purchase an additional USB module, connecting which, your TV will be able to accept the network signal.

We recommend using Internet resources to help in such a question. Just work in the search string your model and read the technical specifications where you will find the information you need among other things, whether your TV Sony Wi-Fi-module contains or you need to purchase it.

Next you need to make sure to correct your router. The router must distribute a signal to any other devices.

You can connect the TV in two ways:

Connecting the Sony Bravia TV to the Internet via Wi-Fi

Many wonder how to configure Smart TV on TV “Sony-Bravia” via Wi-Fi. To take advantage of all the features of the Sony TV with the Smart TV function, you must connect it correctly and configure.

As a rule, connecting Sony Bravia TV, Sony Trinitron or Samsung is carried out in 2 main ways:

To connect directly, you need special conditions, as the TV will work only if the “Internet provider” provides dynamic IP. SMART TV setting on a Sony-Bravia TV via Wi-Fi is carried out according to the following scheme: Network Cable. Router. Wi-Fi Distribution. Dropped signal can be used from any of the desired devices.

note! If there is no Wi-Fi in the TV, you will need to buy a Wi-Fi adapter. However, its acquisition will be appropriate only if the technique supports this technology.

Internet connection in other ways

If you cannot configure a wired connection for some reason, it is impossible to exit the Internet from the TV, you can configure the network by many other methods.

Via Wi-Fi

If the TV has a built-in Wi-Fi module, you can configure a wireless connection. To do this, open the “Network” tab, proceed to the settings and install a new connection. Wireless. The system will find all available Wi-Fi networks, among which you need to choose a home and enter a password for connecting. After a few moments, a notification of successful completion will appear on the screen.

In the event that the TV does not have a built-in wireless module, you can purchase a separate Wi-Fi receiver and connect it to the TV, and then configure the network connection.

Advice! You can configure Wi-Fi distribution via a modem with a built-in router using a wired connection from Rostelecom or another provider. Another way to install the home network is to distribute the Internet through the phone, by connecting the favorable tariff at your operator, be it Beeline, megaphone or some other.

Through a PC or laptop

A computer or laptop can act as an intermediary between the Internet and the TV. Make it possible in two ways.

  • First, you can use the television panel as a large screen. In this case, the laptop or PC is connected via the HDMI cable, and then access the Internet, watch movies, seen on a network or other actions.
  • Secondly, the TV can be connected to a home local network and thereby open access to files located on a computer or laptop. This will allow you to download a movie from the network, and then watch it on the big screen. To configure such a connection, you need to connect the television panel to the local network, to install a media server on the PC and create a folder with shared files to view them on the TV.
See also  Rear view camera Volkswagen Passat b6

Through a TV-console

Many providers provide the opportunity to purchase or rent a special TV console designed to view Internet TV, multimedia content and seining online. It connects to the TV via HDMI, to the network. through the router or Ethernet port.

On a note! There are many TV consoles based on Android. After connecting such devices to the TV, the user gets access to the Play Market store, from which it can download Skype, programs for viewing IPTV, movies and TV shows, as well as many other necessary applications to use them on TV.

Through a PLC adapter

Another way to connect the TV to the network is to use the PLC adapter, which is a special device intended for transmitting an Internet signal through an electrical network.Connection is carried out through a conventional outlet bypassing network filters, adapters and UPS. In this case, the signal will be more stable, and the speed is significantly higher, up to 1 GB per second. The cable is connected to the TV through the Ethernet port. Today, this newest technology is supported by many providers, including Rostelecom and Beeline.

Removal and sorting channels

Unnecessary TV channels can be removed from the menu. Different models of TVs are unlikely. So, for modern devices in the setup menu, you must find “digital configurations”, further ─ “Deleting programs”, select the TV program and click “OK”.

Some models do not contain such an option, so in subparagraph “sorting programs” of the “Digital Configuration” section, the number of an unnecessary source is introduced, and it is sorted by a longer place in the list. So you can distribute all channels, exposing more popular in the first rows.

Setting up a wireless network

How to set up Wi-Fi on Sony TV? It is important to know several core moments:

  • Use wired setup (Wired Setup);
  • only the UWA-BR100 adapter is supported;
  • The option gives access to the Internet, and the setting depends on the type of network and the router.

Setup options

There are three ways to connect the Sony TV to Wi-Fi:

Read more about each SONY BRAVIA connection method to Wi-Fi:

  • WPS key. Conjugation With WPS simplifies the setup procedures and reduces minimum manipulation. Need to find wps on the router. Subsequent actions look like this:
  • Press the HOME key on the remote control;
  • Go to the “Settings” section;
  • Select “Network Settings”;
  • Go to “Wireless Setup”;
  • Select WPS (button);

Not all models of routers are equipped with this feature. Therefore, if you won’t find the button, you will have to be connected manually. entering the network name and password from it.

  • PIN-code input. You need to perform the same manipulations as when connected via the WPS button. Only instead of the button to select WPS (PIN) to use the code. In the future, you need to follow the instructions of the system.
  • Using SSID and password. SSID is a wireless network name. For connection, find out its name and network key (password). As soon as these information received and performed the first 4 steps, you need to click the “Scan” button. After selecting the desired network from the search and follow the requirements.
See also  How to transfer apps to another phone

After connecting Sony Baravia to Wi-Fi, it is recommended to update the list of applications. On the remote control, select Home, then “Installations” and “Network”. Click on the second item “Update Internet content / download available web content”.

After the update is completed again, press HOME on the remote. We will see the section “Processed”, where all installed applications will be. Click on “All applications” and “Add to My Applications”. All.

In the instructions for Sony TV, you can find the full guide to connect to Wi-Fi. Browse it if something failed, or email us!

Wired connection

Although we have the topic about Wi-Fi, I still write how to connect Sony Baravia to the Internet by connecting to the router patch cord. Take a network cable, one end. in the LAN port of the router, the second. to the corresponding connector on TV.

Perhaps the TV book has a port for direct connection of the provider cable. But I do not advise such a way, since the receiver can not recognize the type of connection, and you will not succeed. Through the router is more reliable and for sure.

  • On the TV panel, press home;
  • Select “Network”, then “Network Setup”;
  • We need a wired setup type;
  • Next, choose “Auto” and waiting for the connection.

Now you can enjoy the functions and services of Smart TV fully.

Wired connection

Although we have the topic about Wi-Fi, I still write how to connect Sony Baravia to the Internet by connecting to the router patch cord. Take a network cable, one end. in the LAN port of the router, the second. to the corresponding connector on TV.

Perhaps the TV book has a port for direct connection of the provider cable. But I do not advise such a way, since the receiver can not recognize the type of connection, and you will not succeed. Through the router is more reliable and for sure.

  • On the TV panel, press home;
  • Select “Network”, then “Network Setup”;
  • We need a wired setup type;
  • Next, choose “Auto” and waiting for the connection.

Now you can enjoy the functions and services of Smart TV fully.

sony, internet, connection, possible, problems

How to connect a TV to Wi-Fi with autoconfiguration

Connect iPhone by Wi-Fi Direct to another phone or TV

As on the TV “Sony” you can enter the Internet using autoconfiguration? Function allows you to connect TV receiver with wireless access points of third-party companies. If they do not support such a function, the connection must be performed using PBC (WPS), automatic or manual adjustment.

note! Before connecting TV to Wi-Fi, you must turn off SWL.

Check if a specific device supports the automatic configuration function, on the official portal of the company

Wireless Wi-Fi Connection

The use of wires for communication devices significantly simplifies the synchronization process, however, as already noted, creates a number of problems, in particular. with the placement of cable. To avoid these difficulties, we recommend trying wireless connection options. In particular, using the Wi-Fi Direct standard, providing, as follows from the name, direct connection, without using “intermediate” devices.

In the shortest instruction, how to connect the phone with Sony TV in mind, looks like this:

  • You turn on both devices, after which they find and click on the remote button with the icon pictogram.
  • Go from the main window that will be displayed on the screen, to the Advanced Setting settings list.
  • By choosing the corresponding stitch headings, you activate the BUILT-IN Wi-Fi option first, and then, as soon as it is successfully enabled, the second. Wi-Fi Direct.
  • After both operations are completed, the full name of the created internal network and the password needed to access it will be displayed on the TV screen. It is these data that you must enter on your phone. We advise not to close the page with information until the connection is established.
See also  Video Camera Connection

As a result of a successful connection, you will see a message about the start of synchronization. The process lasts for a long time and it is not worth it. otherwise you will have to initiate again. In addition, in the Communication Setup Process, you can activate or disable automatic search for new available devices available for duplication.

It happens that even a good TV after the first attempt to create a new internal network for direct connection begins to hang. In this case, we first advise you to restart the TV and try again, and then, if nothing happens. reset the settings to the source.

We connect Android smartphone

Briefly consider how to connect the phone to the Sony TV using this technology:

When the connection is successfully installed, you can select multimedia files for playback. or start duplicate the game process.

Content Transmission on Android

The second stage of the process, to do without which it is impossible, includes the following steps:

  • Tapping the header of the desired line contained in the list of available TVs, determine which device will be broadcast. Sometimes for this you need to deploy a list first.

Connect iPhone

Next, let’s give a small instruction how to connect the iPhone to Sony TV on Wi-Fi:

  • First step you must check whether your TV is in a wireless network or, if there is no such, use network cable to communicate.
  • Before the following manipulations, we advise you to certainly update the built-in Sony: it may have emerged significant improvements or innovations.
  • In some cases, in order to start playback, you need to use the external communication module of the UWA-BR100 type.

After the primary check of the settings is enabled, and you activate the distribution of the internal network on TV, follow the algorithm:

  • To enable communication, you need to choose in the list of available Wi-Fi, distributed by TV. You can find it by SSID containing the name of the model. To set the connection you need to enter a password, and then tap “Ready / Join”.
  • You have successfully figured out how to connect the iPhone to the Sony Baravia TV. You can judge the start of synchronization by checkmark that appeared on the left of the name of the wireless network, which will be transmitted a digital signal.

In the absence of the result, we advise first make sure that the password reflected on TV was introduced correctly. For the second line, try to turn off, and after. turn on the TV again. For data transfer, we recommend using special programs; Among the best. IMediaShare.

BYRGPUB.COM 2022