Equipment

Outdoor panel DHI-VTO2111D-WP.
Mounting bracket.
Fasteners.
Rubber plug.
Allen key.
Connection loops.
Instructions.

Как без монитора ip домофона подключить к интернету ip-вызывную панель DS-KV6113-WPE1 отдельно

setting, calling, panel, hikvision, kv6113

Panel from the inside

Customization

The display page will open. To add a panel enter the device list.

Click on the plus to add a new device.

Select a method to connect your new device. Wi-Fi. If the outdoor panel is already connected to the network, you should select P2P.

Enter a name under which it will be convenient for you to see the panel in your application. You can add a panel only by specifying its serial number. You can enter the number manually using the on-screen keyboard, or scan a barcode or QR code with your mobile device’s camera. The serial number and code are indicated on the back of the camcorder body, as well as, in some cases, on the packaging.

Click on the QR code symbol at the end of the serial number input line and point the lens of the mobile device at the sticker on the back of the panel case. Having read the QR code, the application will insert the serial number of the video camera into the string itself. Default user: admin. The default password is admin. PUSH notifications: must be enabled. Audio: if enabled, the application will not perform video communication with the panel. This option can be useful if the Internet connection speed is low. Click “Next”.

After checking if there is an active connection to the Wi-Fi network, the DMSS application will display the network name. Specify the password for the wireless network connection so that the application can transfer it to the video panels. Click “Next”.

Bring your mobile device closer to the panel. The connection may take some time. If the call button on the front side of the devices is permanently lit in blue, this means that the process of connecting the panel to your wireless network is complete.

The door station has been successfully added to the application. Click Display.

Now you can view the video image transmitted by the panel.

To watch the video in the best quality, click on the right symbol at the bottom of the smartphone screen.

When you press the call button on the door station, a PUSH notification will be sent to your mobile device. If the panel is connected to an intercom, then in parallel with this, a call to the intercom will occur.

To start a conversation, press the center key representing a handset.

The event log and the archive of snapshots and videos saved on the phone are available through the menu.

Saving videos and snapshots is available in the Playback window. the keys are indicated by images of a video camera and a photo camera.

Stop video recording by the same key as the start of recording.

Call panel Dahua DHI-VTO2111D-WP

Calling IP panel DHI-VTO2111D-WP is applicable to work together with Dahua IP intercoms or stand-alone. A distinctive feature of the device is the built-in wireless Wi-Fi communication module, which greatly facilitates installation and configuration, although, if necessary, the panel can be wired to the network. In the case of autonomous operation, the call panel sends a push notification via the cloud server to a smartphone with a preinstalled application when called. This application allows you to receive a video image from the panel camera, establish two-way audio communication with it and issue a command to open the door. This review is devoted specifically to the autonomous use of the device. The methods of connection and configuration as part of the intercom system are completely identical to those described in the article “IP intercoms Dahua”.

READ  Hikvision Cloud Connectivity

Consumer Or Pro Doorbell? NEW Hikvision DS-KV6113-WPE1 Villa Door Station Review & Setup: Too Good!

Connection

The diagram shows the difference between the methods of connecting magnetic and mechanical electric locks. To operate the panel, a 12 V DC power supply is required. We recommend a power supply unit of at least 2 A, since you need to power not only the panel itself, but also the lock controlled by it. Also, this outdoor panel can be powered using POE technology. Connect the power supply to the red and black pins of the ringer according to the markings on the back of the case. After turning on the power, the door station starts launching the embedded operating system, which can last up to one minute, and checking the communication lines. While searching for a wireless network, the LED illumination of the call button on the front side starts flashing rapidly (assuming a previously established wireless connection). The transition from blinking to constant light means a successfully established connection and full readiness for work. If you do not have the ability to organize a wireless network, connect the panel to an Ethernet network with Internet access, according to the diagram.

Additional settings

Most of the settings for the DHI-VTO2111D-WP outdoor panel are not available through the mobile application. The easiest way to access these settings is to connect to the web-based interface of the outdoor panel using a personal computer. To do this, you need to know the IP address that the panel received when connecting to your wireless network. This can be done using Dahua’s free Config Tools software, or via the web interface of your Wi-Fi router. In case of wired connection, the default IP address is “192.168.1.110”.

Enter the IP address into the address bar of the internet browser. In some cases, activated add-ons block access to the panel, for example, the Yandex Bar add-on automatically searches the Internet for the entered IP address. We recommend that you disable these add-ons. To view the video through the lens of the door station, you need to use Internet Explorer, since only the necessary plug-in can be installed on it. In the Windows 10 operating system, Internet Explorer can only be launched manually, and it is located along this path: Drive C Program Files Internet Explorer iexplore.exe “.

Further work with the panel is described in the article Dahua IP intercoms.

Advantages and disadvantages

Autonomy.
Easy setup using your smartphone.
Sending Push Notifications to Smartphone.
Fully compatible with Dahua IP intercoms.
Compatible with network video devices.
Wireless (Wi-Fi) and / or wired internet access.
Built-in access control by contactless cards.

Lack of motion recording.
English-language menu when configuring via the web interface.

Call panel Hikvision DS-KV6113-WPE1

Not available

calling panel, 1920×1080, speakerphone, push-button control, panel viewing angle 129 °, IR illumination
2 MP IP calling panel for one subscriber with IR illumination:

2 MP IP calling panel for one subscriber with IR illumination:

Monitor is a subscriber device for receiving audio and (or) video calls between a client and a subscriber. It is a screen with the ability to control an electronic door lock, connect IP cameras and other similar monitors. Monitors can be equipped with internal memory or support for memory cards for recording incoming audio or video calls, as well as voice messages to the answering machine. To connect the outdoor panels to the monitor, as a rule, a classic 4-wire connection is used. It is also common to connect components of control and access control systems to a local network using WI-FI or Ethernet. Many monitors and outdoor panels can be integrated into smart home systems.

READ  Xiaomi Mi Home Security Camera 360 Setting

The second subscriber device is an audio panel. The principle of operation is similar to the classic intercom handset. Modern audio panels can connect to a local network and support IP telephony protocols. Such devices also have advanced functionality, such as “Do not disturb” mode, concierge call, etc.

Call panel. a client device for making calls and (or) entering the premises. The panel can be equipped with a camera, including IR illumination, a proximity card / chip reader or a code keypad. Contactless access can also be done using a smartphone via Bluetooth. Some outdoor panels are mounted instead of a door peephole. Panels integrated into IP intercom systems make it possible to communicate with visitors remotely via a computer or an application on a smartphone.

Proximity card reader is a device for controlled entry into a room or territory. The simplest options work the same way as a regular door communication chip. sophisticated devices are equipped with anti-vandal housings, a built-in autonomous access controller and a code dialing panel.

The extension module for outdoor panels is designed to increase the existing subscriber base.

A stand-alone access controller is a self-contained device for providing room access. Connects directly to the electric door lock. Configurable using a master card or remote control. Has built-in memory for storing access cards and chips. Can be integrated into existing ACS.

Intercoms, in which communication with the outdoor panel is carried out via a local computer network (via Wi-Fi and (or) an Ethernet connection). This connection provides many additional opportunities, incl. and on interaction with other network devices or components of the “smart home”.

In addition to video intercoms with a wired connection of outdoor panels (usually 4-wire), there are wireless models to which the outdoor panels are connected via a radio channel.

Max. connection distance of the outdoor panel

The maximum distance that you can extend the cable to the outdoor panel. For wireless panel. radio communication distance.

The ability to increase the amount of available memory for storing data using Flash memory cards of a standard size. In the absence of such a function, data can be stored only in the internal memory of the device and in “cloud” storage.

Internal memory size measured in MB.

Linear audio input. This is the connector for connecting to the audio line-out port of a device that plays but does not amplify sound. These devices include various portable gadgets. phones, smartphones, tablets, players, photo and video cameras, as well as stationary players, computers, etc. Most often, the audio input is represented by one 3.5 mm jack, but sometimes two cinch jacks are used for the left and right stereo channels.

Line-out (not amplified) audio output is an output for connecting an audio signal amplifier or audio playback device with a built-in amplifier (home audio system, multimedia speakers, TV). Most often, this output is represented by two cinch jacks for the right and left stereo channels.

Allows the transmission of a composite signal. A component signal is the complete form of a color video signal, consisting of chrominance and luminance signals, vertical horizontal and color sync pulses, encoded into a single signal.

The component output is a 3 RCA connector called cinch. Two outputs carry audio and the third outputs video.

PoE (Power over Ethernet) support provides power through a network cable, eliminating the need to plug the device into a wall outlet. Relevant primarily for devices located outside the building.

READ  Setting up the Hikvision Call Panel

Wi-Fi (Wireless Fidelity) is a protocol and standard for equipment for broadband radio communications designed for organizing local wireless networks. Developed by the Wi-Fi Alliance and formalized as various IEEE 802.11 committee specifications. Mobile and stationary devices equipped with client receiving and transmitting devices can connect to a local network and access the Internet through so-called access points or hotspots. Wi-Fi specifications: 802.11b (speed up to 11 Mbps), 802.11a (speed up to 54 Mbps), 802.11g (speed up to 54 Mbps, compatible with b), 802.11n (speed. up to 150 Mb / s with one antenna, up to 300 Mb / s with multiple antennas, compatible with b, g).

The RS-485 interface is a universal serial interface that allows the connection of several devices and over a sufficiently long distance. In CCTV cameras, it is used to control the rotation mechanism (PTZ) and / or lens.

The alarm input signals the start of video recording.

Devices can be equipped with a relay output, to which they send a signal when motion is detected or when another event occurs, for which they are programmed.

Video intercoms can have both traditional push-button and more modern touch control.

Video intercoms can be equipped with both a handset like a telephone and a speakerphone.

The ability to communicate through several handsets connected to one video intercom.

Integrated fingerprint reader for user identification and access.

The presence of a keypad on the calling panel for dialing an access code to the room.

The ability to open the door using compatible cards, chips or from a mobile application on a smartphone.

Video doorphones can be powered from DC voltage sources with different ratings and require the use of power adapters.

Device height (vertical).

Connecting a set of intercom Hikvision DS-KV6113-WPE1 and DS-KH6320-WTE1

In this article, we will be connecting a Hikvision intercom kit which includes:

To connect and configure, we need a PoE switch (for example, Dahua DH-PFS3006-4ET-60), the Hikvision SADP Tool utility and a couple of patch cords.

We connect the intercom panel and the camera to the PoE switch, and the PoE switch itself to the Internet router.

Install and run the Hikvision SADP Tool utility and see our 3 devices with the Inactive status.

This status tells us that devices are connecting for the first time or reset to factory settings.

We need to activate each device according to the instructions.

After activation, the statuses on the devices will change to Active.

All subsequent configuration is performed from the intercom screen in 4 steps.

Choose the language Russian. press Nex

We activate the DHCP checkbox (after 1-2 seconds it will come back, this is normal). click Next

If you have one intercom, we press. Following

This completes the connection of the outdoor panel to the intercom.

Setting up a call to a smartphone.

First you need to enable the Hik-Connect service.

We go in. Settings.. Settings for the Hik-Connect service, enable the service and check the status. Connected.

After that, go to the Hik-Connect application on your smartphone, click Add device

We scan the QR code which is located at the bottom of the screen of the settings menu of the Hik-Connect intercom service (or pasted on the intercom itself)

Enter the confirmation code specified in the settings menu of the Hik-Connect intercom service, click. OK.

Through the mobile application, you can communicate with the visitor and open the door.

We hope this article was helpful. If you have any questions, write to the chat or call our technical support.

BYRGPUB.COM 2021