Samsung Galaxy S7 won’t turn on. what to do

Samsung Galaxy S7 is the flagship of 2016. According to experts, the phone will not lose its relevance in the next 3-5 years. powerful dust and moisture protection, a modern camera, the ability to work under water however, many owners do not turn on the Samsung Galaxy S7 after just a few months of operation.

If the warranty period has already passed, and the phone suddenly turned into a “brick”. do not rush to despair. It is quite possible that the breakdown can be eliminated on its own, even without a visit to the SC. In our today’s article, we will tell you what to do if the Samsung Galaxy s7 does not turn on, how to avoid similar problems in the future, and provide general tips on how to use it.

Samsung Galaxy S7 edge won’t turn on after charging

Among the main reasons why Samsung Galaxy s7 turned off and won’t turn on, two can be mentioned:

  • The contact inside the phone has “moved away”;
  • defective charger / charging controller.

To check if the charger is working, just try charging the phone with another charger. If your Samsung S7 does not turn on after that, you should change the battery. Of course, it is unlikely that he would have “worn out” for a year of operation. but the reason could have been banal overheating. Remember the stories about the S7 exploding while charging? The reason for this is the constant overheating of the battery in some shipments of the flagship. It’s no surprise that the modern phone Samsung Galaxy c7 turned off and won’t turn on. Replacing the battery may well “revive” your phone. and the problem will disappear.

Samsung 7 Age does not turn on after a fall

Definitely. a visit to the service center is required. You will not be able to work with hardware on your own, and the amount of repair depends on the consequences of the fall. if the touch screen burst, then get ready for a cost of several thousand rubles.

“Extending the life” of your smartphone, be more careful in the future. remember that modern technology “does not forgive” negligence!

Galaxy S7 / S7 Edge: Black Screen / Display Not Coming On / Black Display. Quick Fix

Samsung Galaxy s7 does not turn on blue light is on

After switching on, the blue indicator lights up, the inscription “Samsung” appears on a black background, and then the boot process does not go on? We recommend trying a hard reset.

If your Samsung Galaxy s7 turns off and does not turn on, hold down three keys simultaneously: Power, Volume Up and Menu. Hold them for a few seconds. a special menu should appear in which you need to select restart.

In case hard reset with deleting all data from the phone did not help. Samsung s7 edge does not turn on and after that, we advise you to give the phone to a good service center.

Perhaps the firmware of the device will help. the price of such a repair is low, and the work is done, as a rule, 1-2 days after the call.

Samsung Galaxy S7 won’t turn on. what to do

Samsung Galaxy S7 is the flagship of 2016. According to experts, the phone will not lose its relevance in the next 3-5 years. powerful dust and moisture protection, a modern camera, the ability to work under water however, many owners do not turn on the Samsung Galaxy S7 after just a few months of operation.

If the warranty period has already passed, and the phone suddenly turned into a “brick”. do not rush to despair. It is quite possible that the breakdown can be eliminated on its own, even without a visit to the SC. In our today’s article, we will tell you what to do if the Samsung Galaxy s7 does not turn on, how to avoid similar problems in the future, and provide general tips on how to use it.

Samsung Galaxy S7 edge won’t turn on after charging

Among the main reasons why Samsung Galaxy s7 turned off and won’t turn on, two can be mentioned:

  • The contact inside the phone has “moved away”,
  • defective charger / charging controller.

To check if the charger is working, just try charging the phone with another charger. If your Samsung S7 does not turn on after that, you should change the battery. Of course, it is unlikely that he would have “worn out” for a year of operation. but the reason could have been banal overheating. Remember the stories about the S7 exploding while charging? The reason for this is the constant overheating of the battery in some shipments of the flagship. It’s no surprise that the modern phone Samsung Galaxy c7 turned off and won’t turn on. Replacing the battery may well “revive” your phone. and the problem will disappear.

Samsung Galaxy s7 does not turn on blue light is on

After switching on, the blue indicator lights up, the inscription “Samsung” appears on a black background, and then the boot process does not go on? We recommend trying a hard reset.

If your Samsung Galaxy s7 turns off and does not turn on, hold down three keys simultaneously: Power, Volume Up and Menu. Hold them for a few seconds. a special menu should appear in which you need to select reboot.

In case hard reset with deleting all data from the phone did not help. Samsung s7 edge does not turn on and after that, we advise you to give the phone to a good service center.

Perhaps the firmware of the device will help. the price of such a repair is low, and the work is done, as a rule, 1-2 days after the call.

Samsung 7 Age does not turn on after a fall

Definitely. a visit to the service center is required. You will not be able to work with hardware on your own, and the amount of repair depends on the consequences of the fall. if the touch screen burst, then get ready for a cost of several thousand rubles.

“Extending the life” of your smartphone, be more careful in the future. remember that modern technology “does not forgive” negligence!

Myth 6. Getting root and installing custom firmware will void my warranty

The warranty is lost not from the very fact of getting root, but because of its discovery by the service center. Most devices can be unrooted using the Universal Unroot app or by reinstalling the stock firmware using the manufacturer’s official app.

There are, however, two exceptions to this rule. The first is the Knox system pre-installed on new Samsung smartphones and tablets such as the Galaxy S4, S5, Note 3, and Note 10.1. Knox provides an increased level of security for Android, responding to any firmware modifications and installation of third-party kernels and firmware. In the event that the user performs these actions, the system sets up a trigger that confirms the fact of modification. The trigger is implemented in hardware (eFuse chip), so you won’t be able to reset it to its initial position. On the other hand, it is not entirely clear whether the service center will refuse to repair the device on this basis. Second: the eFuse chip is installed on some other devices (for example, smartphones from LG), and it also allows you to accurately determine whether the smartphone has been rooted or flashed.

If we talk about custom firmware, everything is more complicated. Usually, a flashing operation requires unlocking the bootloader, and this can be done either using special exploits or using the web service of the smartphone manufacturer. In any case, the unlocked bootloader will definitely indicate that the smartphone did not belong to a blonde.

On some smartphones it is possible to lock the bootloader back, but you should learn about this separately, and also keep in mind that a newly locked bootloader will most likely receive the Re-locked status, and not Locked, as it was originally (this is the case on HTC smartphones, eg). The only exceptions are smartphones and tablets of the Nexus line, the bootloader of which can be locked and unlocked in three clicks without any dancing with a tambourine, and no one will pick on anything.

On Linux, ADB and Fastboot can be installed separately from the Android SDK. On Ubuntu: sudo apt-get install Android-tools-fastboot. On Fedora: sudo yum install Android-tools.

To prevent the Knox system from interfering with root applications, it can be disabled using the following command from the terminal: su pm disable com.sec.knox.seandroid.

Myth 4. Root rights make a smartphone vulnerable to viruses

It is not root permissions that make a smartphone vulnerable to viruses, but bugs used to obtain them. Rooting tools and viruses can exploit the same Android vulnerabilities to gain root privileges, so the mere fact of having root on a device doesn’t change anything. A well-written virus will not ask for rights in a standard way, betraying its presence, instead it will use the same vulnerability to get them secretly.

over, having root, you get the opportunity to install a fresh version of Android (in the form of custom firmware), in which these bugs have already been fixed. Also, do not forget that most custom firmwares allow you to disable root or create whitelisting applications that can use these rights.

Scenario three: neither firmware nor recovery is available

To be honest, it is difficult for me to imagine such a scenario, but, as practice confirms, it is quite real. There are two ways to get out of this situation: use fastboot to upload recovery to a smartphone, or use a tool from the manufacturer to install the stock firmware. We’ll take a closer look at the second method in the next section, and I’ll tell you about fastboot here.

Fastboot is a tool that works directly with the device’s primary bootloader and allows you to upload firmware to your smartphone, recover and unlock the bootloader (in Nexus devices). Fastboot support is available in many smartphones and tablets, but some manufacturers are blocking its use. So you have to consult the Internet about its availability.

You need drivers and Android SDK to access fastboot. When they are installed, open the command line, go to the SDK installation directory, then to the platform-tools directory, turn off the smartphone, turn it on with the volume buttons held down (both) and connect it using a USB cable to the PC. Next, you need to find the recovery image in the.img format for your device and run the command:

Or even force the smartphone to download recovery without actually installing it:

In the same way, you can flash an official firmware update:

You can find a recovery suitable for your device either on the TWRP website, or in the XDA-Developers and w3bsit3-dns.com forums.

Nexus 5 and other Google phones

Returning Nexus devices to their original state is easier than any other smartphone or tablet. In fact, it is so simple that there is nothing to even talk about. In fact, all you need to do is install the ADB / fastboot drivers (in Linux, even they are not needed), download the archive with the firmware and run the script. Step by step, the whole operation looks like this:

  • Download and install ADB Driver Installer from here.
  • Download and install the Android SDK.
  • Download the archive with the firmware for the desired device from the Google website.
  • Turn off the device, turn it on with the volume buttons held down (both) and connect using a USB cable.
  • Unpack the archive with the firmware and run the script flash-all.bat (Windows) or flash-all.sh (Linux) and wait for the operation to end.
  • Launch the command line, go to the directory with the Android SDK, then platfrom-tools and execute the fastboot oem lock command to lock the bootloader.
READ  Samsung A 30 Screenshot

For those wondering what the script does, here’s a list of commands:

Sony Xperia Z2

Now let’s talk about how to return the Sony Xperia Z2 smartphone to the factory state. As in the previous two cases, this will require a stock firmware and an official firmware utility. You launch the utility on your PC, connect your smartphone with a USB cable and start the update process. Step by step it all looks like this:

  • Download and install ADB Driver Installer from here.
  • Resetting the smartphone to factory settings.
  • Download and install the Flash Tool from the official Sony website and the latest firmware from here.
  • Copy the firmware file to the C: / Flashtool / Firmwares directory.
  • Turn off the smartphone and turn it on with the volume down and “Home” keys held down.
  • We connect the smartphone to the PC using a USB cable and run the Flash Tool.
  • Press the button with the lightning bolt icon in the Flash Tool. In the window that opens, select Flashmode, double-click on the firmware in the list that opens.

Scenario one: after an unsuccessful flashing, the smartphone stopped loading

An unsuccessful flashing can be caused by several factors: the battery has run out and the firmware is only half full, the firmware turned out to be faulty or intended for a different smartphone model. In the end, there was simply not enough space on the smartphone, which can happen when trying to install a fresh version of Android on a smartphone three or four years ago.

Outwardly, all these problems usually manifest themselves either in endless smartphone resets to the manufacturer’s initial logo, or in the so-called boot loop, when the boot animation spins on the screen for more than five to ten minutes. Problems with the screen (multicolored ripples) and a non-working touchscreen are also possible, which also prevent the use of a smartphone.

In all these cases, it is enough to do one simple thing: turn off the smartphone by long pressing the power button, then turn it on with the volume down button held down (some smartphones use a different combination), and after you get into recovery, reinstall the firmware (Install zip from sdcard. Chooze zip from sdcard) or restore a backup (Backup and restore. Restore). Everything is easy and simple.

Clearing the cache

Formatting the phone memory partition that stores the entire cache.

  • Enter the recovery by holding the “Volume up” and “Power on” buttons on the switched off device until an inscription with the name of your phone model appears on the screen
  • After starting the recovery, using the volume buttons, select “Wipe cache partition” and then press the power button to complete the process
  • When finished, select “Reboot system now” by pressing the power button.
  • The attempt was unsuccessful? After restarting the device did not work properly? Moving on to more complex ways.

    Samsung tech support tip

    Following the advice of Samsung technical support, we suggest trying the following very effective way to restore your mobile phone to work:

    • Press and hold the “Volume Down” and “Power” buttons
    • Hold them for 7-12 seconds
    • If after that your device started working, then a very common failure occurred in its operation.

    If the problem persists, then move on to the next solution.

    Check charger and cable

    Perhaps your Samsung smartphone is dead and won’t turn on. You plugged in the charger but nothing happens. First of all, try to take charge from another gadget, and if the phone reacted to it and began to receive a charge, then the problem is in it. The next step is to change the USB cable to determine what exactly stopped working. If, after replacing the wire, your charger began to charge the smartphone battery, then the reason is its malfunction.

    Samsung Galaxy S7 Edge black screen/phone wont turn on

    Samsung Galaxy won’t turn on. we restore the work of the smartphone

    Sometimes Samsung Galaxy smartphones or tablets may stop turning on for no reason. The Android operating system crashes, but most often users have problems due to the pre-installed ROOT rights. Now you will learn how to revive the device, if, of course, this is not a hardware failure.

    There are several ways and we will start with the most obvious and simple ones.

    Flashing with ODIN

    If after resetting the parameters, the device does not work, then you should try to reflash it. We are looking here for the firmware for your smartphone model, download the ODIN program from this link and install the drivers for Windows, and then proceed to the instructions.

      Launch the ODIN application by unzipping it before

  • In the off state of the device, we hold down the “Volume down” and “Power” buttons, and then press the volume button up
  • We connect the phone to the computer, press the key with three dots opposite “AP” and select the firmware file, which is in the.md5 format
  • After a minute or more, the “Start” button should become active. Click on it when it becomes possible and then the firmware process will go.
  • In a few minutes, the gadget should automatically reboot. If you are stuck with the loading animation then try doing a factory reset again.
  • Factory reset

    All data will be lost, including unsynchronized contacts, messages, call history, application data, and files in the phone memory. The contents of the memory card will remain intact.

    • Enter the recovery by holding the “Volume up” and “Power on” buttons in the off state of the device.
    • Select “Wipe data / factory reset” from the list and press the power button
  • After the process is complete, select “Reboot system now” and wait for the device to start.
  • We carry Samsung Galaxy to the service center

    If none of the above solutions to the problem suits you and the phone still does not turn on, then you need to go with it to the Samsung service center. They will probably find out the reason for the loss of working capacity.

    This method is applicable if your phone does not really turn on, but does not turn on completely. For example, it hangs on your Android logo and nothing else happens. This happens due to a malfunction in the smartphone software. Then a hard reset or, in translation, a hard reset will help us. For each model of the device, it is made in different ways. To find out how, enter the name of your phone and the words hard reset, for example LG G3 hard reset, in Google or Yandex and follow the instructions. In the future, I hope to create a separate section on this topic on the blog.

    Unfortunately, not all smartphones support hard reset, it depends on the recovery installed in the device. If you are interested in knowing in more detail what it is, look on the Internet.

    For example, there is no such function by default, in many sony phones, but the manufacturer has provided the ability to restore the software using a special utility Sony pc companion.

    Android smartphone does not turn on. Guaranteed solution to the problem.

    Hello everyone. Today I would like to analyze all the most common reasons why an Android smartphone may not turn on. I will not touch upon those situations when disassembly of the phone and interference with the electronic filling is required, since this is the work of completely different specialists.

    If your smartphone or tablet suddenly stops turning on, it is not necessary to immediately run to a service center or workshop and send it in for repair. Most likely, there is a chance that you can do it yourself and save some money (programs for home bookkeeping on Android will also help you in saving, look for them on the blog). Below we will look at the main measures that you can take if your Android smartphone or tablet does not turn on. And so, let’s get started.

    From my own experience, I will say that in 80% of all cases, if they come to me with a problem that the phone does not turn on, the whole thing turns out to be in a discharged battery. And I perfectly understand when they tell me that they have been charging the smartphone all day, but it still does not turn on. Some devices have one unpleasant feature. if the battery is very badly discharged, it will not charge, even if you keep it on charge all day.

    In this case, a frog-type charger will help us, which allows you to charge almost any battery directly by removing it from the phone. It is enough to recharge the battery in this way for 15 minutes. Then insert it back and put the phone on charge as usual, everything should be OK.

    If getting a frog is problematic for you, then you can use any old mobile phone charger. Cut off the old plug and protect the wires.

    Make sure that the charger is not plugged into an outlet at this time.

    We fix the bare wires on the battery with tape for a few minutes.

    If the phone does not turn on, then it may simply be frozen. To revive your device, we will apply a long-known, but still relevant method. take out the battery and insert it again.

    Unfortunately, this trick does not work on many modern phones with a non-removable battery. In this case, to reboot, you need to find the reset button and press it with a paper clip, for example. It can be anywhere, but it is usually located near the SIM card slot or on the back of a smartphone or tablet. There is sometimes an inscription “reset” or “off” near the reset button. The photo below shows an example of the location of such a button in a Sony Xperia M5 smartphone.

    Android phone won’t turn on. 5 ways to solve the problem.

    Faulty charging. Of course, the second thing to check is the health of the charger. Everything is simple here. we take a working charger and try to charge our smartphone. If the process has started, then we buy a new one and rejoice. Although it sounds trite, it helps one in five.

    Not often, but even so it happens that the smartphone does not turn on due to the fact that the contacts under the battery do not reach. To fix this, you need to bend the contacts with tweezers or a small screwdriver to improve the connection with the battery. The main thing here is without fanaticism, otherwise you will only make it even worse.

    If none of the methods helped and your phone still does not turn on, then the problem most likely lies in the hardware itself and only the service center can help you.

    I would be grateful if you share in the Комментарии и мнения владельцев with your own ways how you can revive your smartphone.

    Best regards, Ivan Derbenev.

    STIHL, STIHL only

    First of all, don’t panic. You may be pressing the wrong button! It is likely that you simply ignored the operating instructions for the phone, that is, you did not read it. As a result, the banal ignorance of the purpose of this or that key of the device during the further use of the device can cause an incredible number of questions. It should be noted that the same button can perform different functional tasks. Often the “on / off” key in the operating mode of the device activates the “lock” command. The screen turns off and the phone goes into standby mode. At such moments, an inexperienced user may think that the mobile phone has turned off, and not knowing how to unlock it is fraught with the loss of not only time, but also nerves. In new modifications of mobile devices, an almost intelligently controlled blocking scheme is used. Therefore, the operating instructions for the phone are an important document that requires careful study.

    READ  How to turn on power saving mode on iPhone

    Reason: Energy

    Most often, you can observe this kind of malfunction: after a short use, given the fact that at the moment the device was started, the charge indicator showed the full volume of the battery, the phone turns off. That is, the storage capacity quickly loses the accumulated energy potential. As a result, we have an extinct phone. “Samsung” does not turn on. Such a precedent can really confuse the user As a consequence. the person changes the battery. However, such “treatment” does not always correct the situation. Typically, signs of battery failure are:

    • Spontaneous heating of the battery.
    • Swelling of the capacitive chamber of the battery.
    • Charge transient to full volume.

    In such cases, it is really necessary to replace the energy element of the mobile communication device.

    Why won’t the phone turn on? Phone user manual

    As a rule, Murphy’s Law works at the most inappropriate moments in our life. In addition, modern means of communication, namely mobile phones, can hardly be considered reliable in full measure. No, of course, no one denies the existence of extra-reliable devices. However, the average cellular device. rather unpredictable device, and the popularity of the question “Why does not the phone turn on?” a great example of this. Let’s take a closer look at the causal sources of, to put it mildly, an unfavorable situation: the refusal of the mobile phone to start when the user activates the “correct” button “On”.

    Reason: Management functionality

    Almost any portable communication device is equipped with a special Power button, which is responsible for starting the device. The miniature dimensions of the switching element require the user to be careful at the moment of pressing, since excessive physical force can simply disable the starting mechanism. And if you take into account that in some models the launch button is too tight, and its form factor is absolutely impractical, you can be sure that the question “Why does not the phone turn on?” just a matter of time. Therefore, when buying a device, pay attention to such an insignificant characteristic of the device as the convenience of pressing the “On” key.

    Replace the micro button at home. quite a problematic task. Feasible, of course, but the “operation” requires some skills and the presence of special tools. In addition, not every phone can be easily dismantled, often the design features of the body of the device, when disassembled, even create “problems” for professionals. Remember this.

    The main reasons for the “non-inclusion” of a mobile phone

    So, the manufacturer of the cellular device provides you with the necessary information in the form of some kind of instruction. Many people underestimate the important essence of the attached document. Which, in general, is not entirely correct and even unforgivable, given the considerable cost of some modifications of mobile devices. Practice shows that the instructions are simply ignored; at best, the user only skims the text of practical recommendations superficially. As a result, the ranks of “thirsty” for an answer to the question “Why does not the phone turn on?” are inexorably replenished, and the popularity of the problem is gaining actual weight.

    Believe it or not, after spending a few minutes studying the instructions for the phone, you will significantly expand your knowledge base, moreover, many difficulties will be resolved literally immediately. The main thing is that you will protect your device from unjustified operational errors, which are made precisely by those who did not deign to use the mentioned free material.

    Battery

    Your smartphone’s battery can run out at the wrong time, even if you recently charged it. Many modern phones equipped with options such as Bluetooth and Wi-Fi drain much faster than older models. When you have Wi-Fi turned on and there is no network, the phone will throw all its energy into finding it. If at this time you do not need the Internet, then disable this option, the same applies to Bluetooth.

    OFF / ON button

    Sometimes it is because of this button that the phone has a dark screen. When the device is completely new and the on / off button is faulty, get acquainted. this is a factory gaffe. Contact the seller who will change the phone or redirect to the service center.

    If the device has been serving you for some time, and it suddenly became clear that the screen image is not loading, take it for repair. Such a problem could have occurred as a result of the impact of the phone or moisture that got into it. The service will offer you the following services:

    • keyboard panel replacement
    • deep cleaning of the device
    • partial or complete replacement of the keyboard controller

    Why Samsung Phone Won’t Turn On

    If you are left without communication, then calm down and think about why the phone does not turn on. A common mistake many users make when disconnecting their phone are the following: opening the case cover and jerking the wires, loosening small parts, etc. If you want your smartphone to have a chance of life, then never do that.

    A person who does not understand how a modern phone works is unlikely to be able to find the cause of the problem. The answer to the question. “Why does the Samsung phone not want to turn on?” Is hidden in the little things, and “self-medication” will lead to really serious problems.

    Charger status

    You put the phone on charge, the required time passed, but it still did not turn on. Pay attention directly to the charger. In the device, the wires may break off or the contact may come off.

    The way out is as follows: take a similar “charge” or use the “frog” battery. If these methods do not help, remember if you have charged your smartphone using someone else’s charger, which may not fit your mobile phone. Expensive phones are very sensitive to such changes and, after that, only a flashing can save them.

    Samsung phone won’t turn on. reasons and how to eliminate

    Let’s figure out why Samsung phone won’t turn on. First, we will list the main reasons, and then we will give an explanation for each of the points.

    Common reasons why your Samsung phone may not turn on:

    Smartphone updates

    Probably all users of modern devices like to experiment with updates of various applications, but they forget that not all updates are useful for smartphones. Some downloaded features are incompatible with the device’s system. this leads to the fact that it will turn off when it pleases.

    Exit: from the switched off phone, remove the battery, wait a few minutes, insert the battery, turn on the device and remove unnecessary updates. If this does not help, you will have to apply a smartphone sweep. Stripping. this is a function that removes all settings of the phone and returns it to the factory settings.

    Take it to the service center

    If none of the above methods helped, then all that remains is to take your smartphone to the nearest service center. Fortunately, for the most part, the diagnosis of such an error is free.

    Check the cable and charger

    It may well be that the phone is completely discharged, and it simply does not work to charge it. It is necessary to check if the charger works at all. Try to charge the device from the USB port of a computer or laptop.

    If this does not work out, it may well be that the problem is in the cable. try charging from another. Plus, no matter how trite it sounds. try a different USB port or outlet.

    samsung, phone, turn

    Doing a hard reboot

    It may well be that there was a failure in the Android firmware and therefore it does not want to turn on at all. Therefore, you need to turn on the phone with a special keyboard shortcut.

    samsung, phone, turn

    The smartphone must be fully charged and at least somehow respond to key presses.

    Press simultaneously two keys on the case: volume down or up and power. Keep them pressed until the Recovery menu opens on a black background. If it appears, then this is very good, then the problem is software and we will definitely solve it.

    In the menu, moving through the items is carried out by the volume and power buttons.

    Now, let’s do a simple reboot. go to “reboot system now”.

    If the problem is not resolved after it, then we will do a full reset. Remember that after a reset, all data from your phone will be erased. Go back to the moment when the menu appears.

    Open the item “wipe data / factory reset” and confirm your intentions.

    Next, go to the “reboot system now” item. After rebooting, the phone should turn on normally.

    Interesting! I also recommend that you read the material. how to reset settings on Android. There we looked at how this is done in more detail.

    The phone won’t turn on. why and what to do

    Pull out SD card and sim card

    On some Android devices, the cause may be a faulty SD card or SIM card. Remove them from your smartphone and try turning it on.

    If everything worked, then most likely the SIM card or SD card will have to be replaced with another one. If not, then we will look for the reason further.

    In the cold or the sun

    If the device was exposed to sunlight for a long time or, conversely, it was at sub-zero temperatures, and then turned off, then let it return to room temperature. Do not touch your smartphone / tablet for two hours. Then try turning it on again.

    Interesting! If your smartphone was drowned or a good amount of water just got on it, do not turn it on, immediately take it to a service center to dry and clean it there. Otherwise, the contacts will be oxidized and, even if you can turn on the smartphone, it will not work for long.

    Hold down the power button

    First of all, you need to try to turn on the smartphone by holding down the power key for a few seconds. It is usually worth holding it for 7 seconds for the device to restart.

    Battery

    A very common reason. the battery is out of order, the phone does not turn on or off. It happens on both new and long-used devices.

    samsung, phone, turn

    For example, if you bought a new phone, and it lay in the warehouse for a very long time uncharged, then it may well be that you will not be able to turn it on. The reason will be in the battery, it will need to be reanimated, usually this is done by a frog in service centers or, who knows how, at home. It is better to carry the device under warranty and change it to another.

    READ  How to reset Samsung a50

    Look if the battery is swollen, take it to the nearest service center, they will tell you for sure whether the reason is in the battery.

    Interesting! If possible, remove the battery from the phone for 15 seconds, then put it back in, try turning it on.

    What to do if Samsung Galaxy won’t turn on?

    Everyone is used to the fact that the phone is always at hand. with it we always stay in touch and up to date. And at that moment, when it unexpectedly, for some unknown reason, does not turn on, a real catastrophe ensues. With today’s rhythm of life, even more so, being left without the Internet and communication, even for a couple of hours, is like being left without hands! If such a nuisance has not spared your Samsung Galaxy, the first thing to do is to try to remember under what circumstances it stopped working. If on the eve he seriously fell, got wet or overheated on the car’s torpedo, then one cannot do without the advice of a specialist and professional diagnostics. However, the problem is not always in the hardware of the smartphone. Sometimes you can try to cope on your own. With this we will just try to figure it out today.

    Prompt repair of Samsung Galaxy at the “X-Repair” service center

    If a full reset of Samsung Galaxy settings and other tips did not help, bring your phone to the X-Repair SC. Our masters will diagnose it for free and quickly figure out why the smartphone does not turn on. For this we have everything you need. equipment, tools and knowledge. We are waiting at the branches of our network, which you will find near the stations of the Moscow metro.

    What you can do at home if your Samsung Galaxy won’t turn on

    So, after making sure the phone hasn’t dropped or got wet lately, it’s time to consider other versions. There are not so many of them. without the help of a service center employee at home, you can check only three.

      1. The charger does not work. Perhaps the smartphone has completely sat down, and due to faulty charging, you simply cannot charge it. Therefore, try using a different device or connect your phone to your computer using USB. If Samsung turned on, the problem was with the charger. 2. The charging socket is clogged. Few of the users think about the fact that the USB connector must be periodically cleaned of debris. The fact is that over time, dust, pellets, and lint collect in the charging socket. To remove the accumulated dirt, you need to turn the phone upside down and very carefully so as not to damage the contacts, clean it with a regular toothpick or tweezers. After the “procedure” put the phone on charge. If it doesn’t help, check the latest version. 3. Errors of the software part. To test this version, it is recommended to perform a hard reset on the Galaxy. But since the phone does not turn on, you will not be able to do this through the usual menu (Settings → Accounts → Backup and reset → Factory data reset). There is another way. you need to enter Recovery Mode. To do this, follow the instructions:

    • Simultaneously press and hold three keys: “Home” “Power” “Volume ⇧”. If your Galaxy does not have a Home button, press and hold only Power Volume ⇧.
    • After the inscription with the phone model appears on the display, release the “Power” button, while holding the remaining keys (for about 5-15 seconds) until the Android Recovery menu is displayed on the screen. If the menu still does not appear, repeat the previous steps again, but hold down the keys a little longer.
    • When the menu is highlighted, use the “Volume” key to select “Wipe data / factory reset” and confirm the selection with the “Power” key.
    • In order to select “Yes” (on some devices “Yes. Delete all user data”) press the “Volume” key, and then confirm your choice by pressing the “Power” button.
    • After all data has been deleted, the main menu is displayed. In order for the phone to reboot, in it, using the “Power” key, you need to select “Reboot system now”.

    How to Fix Samsung Galaxy S7 Won’t Turn On

    If you reset the Samsung Galaxy to the factory settings, but the smartphone does not turn on, there is only one way out. contact the specialists for help.!

    You may also be interested in:

    If, for any reason, you need to disassemble your Samsung Galaxy S7 Edge, use the video tutorial from

    Samsung Galaxy A5 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A5 does not turn on

    Samsung Galaxy A3 screen replacement (front glass is broken) 4000 Frequent breakdowns Samsung Galaxy A3 does not turn on

    Samsung Galaxy S6 screen replacement (front glass is broken) 7000 Frequent breakdowns of Samsung Galaxy S6 do not

    What to do if Samsung Galaxy s7 Edge freezes and does not respond to any actions, how to restart

    Samsung Galaxy S7 edge stuck and don’t know what to do? In this article, we will show you how to force reboot on frozen Samsung Galaxy and similar Android smartphones or tablets.

    Many smartphone users complain that the device freezes when games or applications are open, for some after charging, the screen does not turn on, and some say that the Galaxy S7 freezes for no apparent reason at all. It happens that the screen does not work on a frozen phone, but you can receive calls. Also, many users say that the smartphone gets very hot and are afraid that it may simply explode.

    And what to do if the Galaxy S7 edge gets very hot and does not react to any actions? Many just wait until the battery is discharged, but how long to wait for those who have an almost full charge, do not wait a few days, and not the fact that it will then start working normally. Many people simply need a phone to work and they simply do not have time to wait until the battery is completely discharged. It’s good if your Android smartphone or tablet has a removable battery, then you can try to simply remove the battery and insert it back in a minute, but what to do if the battery is not removable and there is no time to wait until it is discharged by itself?

    I hope that your smartphone or other device will not freeze, but if all the same this happened and the Samsung Galaxy c7 Edge freezes up and does not respond to anything, then I suggest making a forced reboot by pressing and holding certain buttons on Android:

    Many users wonder why Galaxy S7 and similar devices freeze on Android or other operating systems. There are many reasons why this happens with smartphones. The main reason is not enough RAM to run open tasks on the device. For example, a running powerful game or application may use a lot of RAM and the available one may not be enough. Also, several games or applications launched at the same time can also lead to such consequences. The Android operating system is a bunch of programs and applications that run in the background and we may not see these processes. But there may be errors in the operation of the operating system and in order to eliminate them, you need to periodically reboot the smartphone. Users of the Samsung Galaxy c7 Edge and other high-tech devices never reboot their smartphone or tablet themselves, and due to the large number of errors that occur, the device, at best, may simply reboot, or it may just stupidly freeze, and only then we are looking for a solution to what to do. Therefore, reboot your phones at least occasionally while they are working normally.

    Failure of microcircuits

    It could be like your fault. in case of negligence with the device, and the fault of the manufacturer, for example, memory chips in Samsung phones often fail. A repair specialist can tell you more. Open the phone yourself and try to spy out something there. hurt him once again.

    Software crash

    Only masters can establish this reason, so there is no point in advising anything here. Also, carry your phone for diagnostics.

    Discharged battery

    Battery. this is the first thing to check in this case. Connect the charger and leave it for 30 minutes. Sometimes, after a complete discharge, the device can turn on only after some time. just about an hour across the floor. If not, check directly the charger. Ideally, borrow it from someone: the reason may be in the block itself. If everything is all right with him, the last way. check battery.

    Leave the phone to charge for a day, if there are no positive shifts, it is possible that the reason is in a damaged battery. However, in this case, it will be better for everyone if a specialist confirms or refutes this. (If you need advice on this. Please contact our specialists, the “Remfon” service center. If you have not dealt with the problem yourself, during the free diagnostics they will be able to determine the exact cause of the malfunction).

    Moisture has entered the phone

    If water gets into the phone, this is a sure signal that the device may not work correctly. In all cases when there is penetration of water into the gadget, especially sea water, sweet water, beer, etc., it is better to show the device to the repair specialists. Since its normal operation can be interrupted at any time, and timely cleaning, high-quality drying and elimination of corrosion will help to avoid more global consequences. So if you know for sure or guess that the device could get wet for some reason (using it in the bathroom, in the rain, it is not necessary to drop it in water), this may be the reason why the phone does not turn on.

    If the phone turns on and off

    Among the reasons why the phone won’t turn on or turn off periodically, there may be a problem with the on / off button. This is due to getting wet and insufficiently high-quality drying, possible factory barracks, strong unsuccessful pressing, falling, etc. Outwardly, this breakdown may not be obvious to you.

    If the phone turns on and off immediately, regardless of whether it’s on Android or iPhone. this indicates a malfunction of the battery or the connection between the battery and telephone contacts.

    The following actions can serve as a signal of damage to internal elements, including as a result of a shock: press the case firmly, if the phone turns off or freezes, the board or other elements are likely to be damaged.

    BYRGPUB.COM 2021