Hard reset Samsung Galaxy A5. way 1
The first option involves 5 steps, which will be discussed below:
– in the menu of your smart you need to find and go to the “Settings” directory;
– this is where the “Backup, reset” element is located, which must be activated;
– then you should pay attention to the line “Reset all data”;
– “Reset device” should be pressed further;
– the last step to complete this action is “Delete all”.
After performing all the above actions, you will have a device in your hands that requires your close attention, because Smart seems to have been reborn, you will have to configure it “from scratch”, but isn’t that what you achieved? The speed of response to requests is surprising, no freezes, brakes and other inconveniences.
Hard reset Samsung Galaxy A5. reset settings, password, pattern
During use, any gadget “clogs up” and even superficial cleaning of the phone does not give any results. And at such moments there is no other option except how to hard reset the Samsung Galaxy A5 or whatever it is called in the Russian-speaking space. reset to factory settings. This will completely delete all information and reinstall the software.
And you will have a completely empty phone in your hands, as if it had just arrived from the factory. Therefore, it is worth worrying in advance about the safety of your dear data, which is located on the internal memory of the device. The built-in memory card will remain intact, you can transfer contacts to it, etc., the SIM card will also remain intact.
As for the safety, you can also use the storages located on the Internet, their use is free, available to everyone. It is rational to use them not only when it is necessary to reset the data of the gadget, but also during daily use. Equipment at any time can fail and “get” what is stored on the internal memory of the smart can become an expensive task or completely impossible.
Hard reset Samsung Galaxy A5. way 2
The second way may show a little more complicated, but in any case it is worth describing it in stages. Perhaps this is how you will be able to bring your phone back to life. It is suitable for you if you forgot your Galaxy A5 pattern or password, or if your smartphone cannot boot.
– first you need to connect the phone to the charger, charge it as much as possible and disconnect it not only from charging, but also turn it off altogether;
– then you need to hold down several buttons at once, namely: “volume plus”, “Home” (located in the center on the front of the smart), as well as the “Power on” button;
Resetting the Samsung Galaxy A5 is definitely an extremely powerful method for cleaning your smartphone and bringing it back to full life. But using this method is not recommended too often. Pay attention to the signs that your device gives you. With its glitches and slowdowns, it lets you know that there are problems somewhere that need to be fixed. Licensed software and high-quality antivirus software can protect your Smart and you will not need a reset.
How to safely reset Samsung Galaxy to factory settings (hard reset)
Step-by-step instructions on how to hard reset on Samsung Galaxy mobile phones and tablets: J3, J5, J6, J7, S8, A5, DUOS, Galaxy Tab.
Resetting data, or hard reset. deleting the recorded data from the phone. All messages, contact phone numbers, photos, music, audio, mail settings are deleted. In this case, the tablet / phone “rolls back” to the factory (that is, the original) state.
Resetting the settings helps when problems arise that cannot be eliminated by other means, for example:
- if no applications are installed,
- the device does not work correctly,
- there are errors in Android after flashing.
It makes sense to hard reset before selling or transferring to another user. This way you are guaranteed to delete all confidential data.
Step by step Hard Reset on Samsung Galaxy phones
There are several ways to do a factory reset on Samsung.
FAQ (Frequently Asked Questions)
I deleted the account. the phone was reset to factory settings. After that, languages вЂ ‹вЂ‹, including Russian and Ukrainian, disappeared. How can I get them back?
Go to Settings Language & Input (respectively in English). If the Russian language is not found, on w3bsit3-dns.com look for the firmware for the Samsung Galaxy A5 and update the device manually. How to do this, again, check the Galaxy A5 forum thread.
I reset my Samsung Galaxy j6 to factory settings, now I can’t update Android. He dropped to 7.0. Very uncomfortable. How to return?
Try updating through Samsung Smart Switch. You cannot download directly on the Samsung website, however, on w3bsit3-dns.com you can find firmware files and update the device manually.
Reset settings on Samsung Galaxy S8 phone. I restored my Google account after the reset, but I lost access to the Google Authenticator app.
For information on how to restore Google Authenticator, see the article:
If the instructions do not help, contact Support Google: Help Contact Google.
After the official update over the air, on Android 8, the phone became very discharged. especially after a reboot.
Leaving an old version of Android is unsafe and pointless. the phone will be vulnerable to most current viruses.
- Pay attention to the information in the article, which lists the reasons for the rapid discharge of the battery.
- Analyze through Android settings which processes are consuming battery power: perhaps it is a virus or a poorly optimized application.
I changed my phone. On the former phone, I reset the settings and switched to a new one. When I entered my cloud on. there was not a single photo and video.
- Check Trash content in the cloud
- Next, go to the sync settings and check if it’s enabled.
- It is also possible that the photos are stored on a PC. try copying them to the cloud.
- If the photos were stored on a memory card, you can try to restore them using the Photorec program.
If I reset the settings to the factory settings, will I have a flash drive that is formatted only on my phone?
Yes, it will. If the flash drive is encrypted, then it can only be decrypted on your device. If we are talking about the file system of the SD card, then it can be selected in the application settings, for example, SD Formatter or in the standard formatter.
Factory reset via menu
Open the Android menu, and select “Settings”. “General”.
You need the option “Archive”, “Reset” or “Privacy”. the names are different, depending on the version of Android.
In the “Data Reset” section, click the “Reset” button to perform a Hard Reset.
Your tablet / phone will restart automatically.
Everything, factory reset completed, data deleted.
Preparing for a factory reset
Before doing a factory reset on your Samsung Galaxy, please back up any data that is important to you, as it will be erased.
Be sure to delete your Google user profile. otherwise, after a hard reset, the device will ask for a username-password. If you (or the new owner) are unable to enter them, the Android download will fail. How to do this, read the link:
As a last resort, you can unlock the device in the proprietary service “Samsung”, but you need to have documents with you that confirm that you are its buyer.
Factory reset via phone hardware keys
- Android OS won’t start,
- locked screen of Samsung device,
- no access to settings.
So, in order to reset the settings without booting the Android OS,
- Turn on your mobile device by pressing the hardware Power button. It is usually located on the side or top.
- Press the Power, Home and Volume Up buttons at the same time. If there is no Home button, just hold down the other two buttons. If you have a Bixby button, you also need to press it.
- Release the Power button as soon as Samsung Galaxy appears on the device screen
- Hold the remaining buttons for another 15 seconds until Recovery appears.
- If there is no Recovery label, repeat the previous steps, holding the buttons for a longer time.
- Use the Volume Down button to navigate the menus. Find Factory Reset.
- Click on Factory Reset by pressing the power button.
- Press the volume down key to confirm the deletion (Yes).
- Pressing Power, restart the device.
After these steps, the data will be reset to Samsung.
Locking the phone after Hard Reset: what to do
Starting with Android 5.1, theft protection Google FRP is activated on Samsung mobile devices. It works as follows:. when you perform a data reset, without first deleting your Google account, the device is locked.
Let’s say you rolled back the phone to the factory settings, forgot to delete the account data. and when you turn it on, the phone asks for the login data that was entered before the reset. In this case, there are two solutions:
- Enter the correct username / password to enter your account
- Contact the service with documents confirming that you bought the device.
In the absence of a coupon, check, agreement, you will be denied unblocking. Therefore, be careful and strictly follow the instructions when performing a hard reset.
How to reset Samsung Galaxy Tab 2 10.1 P5100. hard reset
Welcome to droidium.ru! Would you like to learn how to hard reset on Samsung Galaxy Tab 2 10.1 P5100? Sometimes tablets and phones running the Android operating system fail. If you are the owner of an Android gadget and decide to reset the Samsung Galaxy Tab 2 10.1 P5100 to return your tablet computer to factory settings, then you have come to the right place. It is often necessary to reset the settings due to an application error or if a virus has infected the operating system (for example, resetting the settings can help if a banner virus has penetrated into Android and blocks the screen). Perhaps a similar situation has occurred with your gadget, or you just want to delete all information from the internal memory of your tablet computer.
Various factors can cause a system failure. This may be the general clutter of the system due to the frequent reinstallation of applications and the installation of a large number of programs and games on the internal memory and memory card. Or, which in general happens quite rarely without third-party intervention, it may be an internal OS error. Aside from operating system issues, the Samsung Galaxy Tab 2 10.1 P5100 may not turn on at all. If the device slows down, freezes or is unstable, then a hard reboot can also help it. But what exactly is rebooting and what is resetting on the tablet? It is worth clarifying here that there are two types of factory reset on Android tablets and smartphones. You can reset Samsung Galaxy Tab 2 10.1 P5100 settings using software and hardware methods. And these methods are different.
On some firmwares, during a soft reset, you can select the desired deletion options. In this case, all information is deleted from the memory card and internal memory of the operating system. When you hard reset the settings through the special Android System Recovery menu, there are no such options, so SMS messages, phone contacts, applications and games may be saved. Nevertheless, before doing a software or hardware reset of Android to factory settings, we still advise, if possible, to make a backup of important data for you and save them. As a result of the reset, the following data will most likely be lost: installed applications and games, Google account and all data associated with other accounts, your personal data (contacts, SMS messages, calendar notes), data on system and application settings.
If you want to reset the settings on your Samsung Galaxy Tab 2 10.1 P5100 to return the old device firmware, then we have to disappoint you. Neither hardware nor software resets will help restore the old firmware. It can only be restored by manually flashing the gadget. Next, we will look at both methods of how to perform a factory reset on a Samsung Galaxy Tab 2 10.1 P5100 tablet computer and start with an easier method. a soft restart of the system.
How to reset Samsung Galaxy Tab 2 10.1 P5100 from Android
If your tablet boots, it’s easier to do a soft reset to factory settings than to do a hard reset. To perform a soft reset, you need to enter the menu of your tablet.
After you get to the device menu, find the settings shortcut and click on it.
In the settings, you need to find the ‘Accounts’ menu item or the ‘Personal data’ option (depending on the gadget’s firmware). And after that select the menu item ‘Restore and reset’ or another name of which may be ‘Backup and reset’.
Next you need to find the menu item ‘Reset settings’ (it may also be called ‘Reset data’). As you can see from the explanation in the picture below, all parameters will be reset and all data on the device will be deleted.
By going to the data reset menu item, you can reset the Samsung Galaxy Tab 2 10.1 P5100 to the factory settings of Android.
After pressing the reset button of the device, Android will ask for confirmation ‘Delete all personal data and downloaded applications? It will be impossible to restore them ’to completely reset the operating system settings.
Clicking on ‘Erase All’ (or ‘Erase All’) will start the process of resetting the Samsung Galaxy Tab 2 10.1 P5100. This concludes the description of the software reboot of the system and move on to the hard reset.
How to hard reset Hard Reset
If your tablet won’t turn on or start, then the Android OS software glitch may be the reason, and not a hardware malfunction of the device. This is why the developers have implemented a hard reset, which can be launched by pressing buttons on the Samsung Galaxy Tab 2 10.1 P5100. To reset the settings without logging into the system, you must turn off the device. Here are some ways to reset, try:
1) To enter the reset settings, hold down and hold the volume up button (or the volume down key) and the power button. Or we do everything the same, but after pressing the power button, we continue to hold down the volume key. 2) The second option is similar to the first, you need to press and hold the volume down and up, and then just press the power key of the device. 3) The third option for launching the recovery menu is to hold down three keys simultaneously: the home screen button, volume up, and the power key. 4) The last option. Press the power button and hold for 1-2 seconds, then hold down the volume up and down buttons and the power key, and hold until the recovery menu appears.
Here’s how to hard reset Android in smartphones and tablets from Samsung (Samsung). Turn off the device. To enter the recovery menu, you need to simultaneously press three keys: the button to call the main screen of the device, increase the volume and the power key. Resetting the settings is carried out using the Wipe data / Factory reset item, which can be selected using the volume up and down buttons. Next, we agree to erasing data and reboot the device using the ‘Reboot now’ menu item.
After that, the device will either simply reboot and reset automatically, or a recovery menu will appear. As soon as you get to the recovery menu, you need to select the Wipe data / Factory reset item using the volume down and up keys, click on it and agree to delete the settings on the tablet. We hope you managed to go to the recovery menu and reset the settings on Android. If you have a question or cannot perform a factory reset on your Samsung Galaxy Tab 2 10.1 P5100 yourself, ask a question in the comments.
A factory reset deletes all data from your Galaxy, including games, apps, photos, and contacts. That is why it is called that, because it returns the smartphone to its factory state.
Therefore, we recommend that you back up your Galaxy data before performing a reset. To do this, with the official instructions of Samsung.
Factory Reset on Samsung Galaxy from Menu
So, if the preparatory part is done, and you can go to the smartphone settings menu, to reset the Galaxy to factory settings, do the following:
- Go to smartphone settings
- Go to the “General Settings” section. If there is no item, go to step 3
- Open “Reset” (Archive and Reset or Privacy, Archive and Reset)
- Open “Reset” (Reset device or Delete all)
- Click on the “Reset data” button (Reset device)
In parentheses are alternative names of menu items that may appear in different versions of Android.
If necessary, confirm the operation, after which the reset will begin. It usually takes a few minutes.
After the smartphone is turned on, it will be in a state “out of the box”, as if you just bought it.
After the reset is made, when logging in, you will need to enter the data of the Google account that was linked to the phone.
Therefore, in order not to get into an unpleasant situation, make sure that you know exactly the details of your Google account, and if you are going to sell your phone, be sure to delete your account from your phone before resetting.
If at the time of the reset, you were not logged into your existing Google account, you may receive a message with the following content:
An unauthorized attempt was made to reset the device to factory settings. Connect to a Wi-Fi or mobile network to verify your identity.
Do not be afraid of him, just enter the details of your account, which is used on the phone.
How to Factory Reset Samsung Galaxy?
Resetting Samsung Galaxy to factory settings (Factory Reset, Hard Reset) will help restore normal operation of the smartphone in case of a failure. In addition, it should definitely be done before selling the phone in order to delete all unnecessary data.
In the instructions below, you will learn how to prepare and reset your Galaxy smartphone through the menu and physical buttons. The instruction is relevant for most devices of the Galaxy line, including S7, A5, J2, as well as more “recent” models.
Things to do before resetting?
Before performing a reset, there are two main points to pay attention to:
Reset settings on Samsung Galaxy with buttons
If you cannot enter the smartphone menu, you can hard reset the Samsung Galaxy using a combination of buttons, which will depend on the available buttons on your phone model.
Turn off your phone. Further, the following options are possible:
- If there is a physical Home button, as in the picture below, you must simultaneously press and hold the Power, Home and Volume Up buttons.
- If there is no Home button and there is a Bixby button, you must simultaneously press and hold the Power, Bixby and Volume Up buttons.
- If there are no Home and Bixby buttons, hold down the Power and Volume Up buttons at the same time
The further procedure is the same for all options:
- After the Samsung Galaxy logo appears on the screen, release the “Power” button
- Hold the rest of the buttons until you go to the Recovery menu (usually about 5 seconds)
- In the menu that appears, select “Wipe data / factory reset” (to navigate the menu, use the volume up / down buttons
- Confirm selection by pressing the power button
- Then select “Yes” (Delete all user data)
- Press the power button
- After deleting the data, click on Reboot system now
Your Samsung Galaxy should reboot and power on for further setup. As mentioned above, you will need to enter the details of the Google account associated with the phone.
In this tutorial, we showed you how to reset your Samsung Galaxy to factory settings. In preparing the article, materials from the official Samsung website were used. If something doesn’t work out for you, write about it in the comments.
How to properly reset to factory settings
Since the data is deleted beyond recovery, the device’s memory is completely cleared, you need to copy all important information to other devices or a virtual disk, for example, Yandex Disk or to your Google account.
It is also necessary, after the copying is completed, to clear all Google account data that were used to download and install applications from PlayMarket.
Important. If you do not delete your Google account data, the device will try to log in to the same account when the device is turned on. And without entering the previous data, starting the phone will not work.
What is a factory reset for?
Such an operation is an extreme measure that can be resorted to in several cases.
- When a problem arises in the operation of the device, when other methods of fixing do not help, including a simple reboot.
- Complete deletion of data is required before selling the phone to another user.
- Updating the device firmware also resets to factory settings.
Samsung Galaxy A5 (2017) A520F Factory Reset / Hard Reset
The device does not turn on
All versions of devices running Android 5.1 and higher are equipped with Google FRP theft protection. If you reset all data to the factory state of the phone but do not delete the Google account before this, then the device will be blocked and will not turn on without entering the data of the previous account, that is, its username and password.
Factory Reset Data on Samsung Galaxy
Resetting phone data is a forced removal of all information, including the list of contacts, messages, photos and videos, music files, mail and instant messenger settings, all installed applications. The reset option is also called in some models. reset, hard reset, factory reset. Smartphone software reverts to new.
Samsung Galaxy is locked and asks for Google account details
Resetting data using buttons
This method will help in a situation when the phone or tablet cannot be turned on, or the screen is locked.
- If your phone has a Bixby button (to the left or right below the volume buttons), you must press and hold the Power buttons, Volume Up, Bixby, at the same time.
- If there are no Home and Bixby buttons, press and hold the Power Volume Up buttons at the same time.
After “Samsung Galaxy…” appears on the display, release the “Power” key. Continue to hold the remaining buttons until the “Recovery” mode appears (approximately 5-15 seconds). Recovery is a device reboot mode in the form of a text menu.
If Recovery does not appear, you need to repeat steps 1-3 again with a longer hold of the specified keys.
- Confirm selection by pressing the “Power” key.
- Then use the “Volume Down” button to find the item “Yes” or “Yes. Delete all user data”.
Samsung Galaxy A5 (2017) hard reset
- Press the “Power” key to confirm the deletion of all data from the device.
- When the main menu appears, find the line “Reboot system now” and confirm the selection by pressing the button on “Power”.
- Reboot and reset all phone data to factory settings.