Table of Contents

Простая прошивка любого Xiaomi OTA или Полная. Прошивка Xiaomi 4X с aliexpress

Install the drivers

The computer automatically installs drivers for the smartphone if necessary, but sometimes this does not happen, the PC does not see the smartphone. In such cases, you need to install the drivers yourself. Drivers can be found on the w3bsit3-dns.com forum. Please note that drivers may vary depending on the type of processor used in the Xiaomi smartphone.

Enable USB Debugging

Let’s move on to other solutions. If the first case is not yours, try enabling USB debugging. To do this, in the “About phone” section, find the line “MIUI Version” and tap on it exactly 7 times.

redmi, connect, computer

If everything is done correctly, the developer mode will open.

Open, activate this mode, then activate debugging about USB.

Read more about activating the mode on the next page.

Xiaomi connected as a digital camera

The case when the computer sees the device, but only photos are available. To fix this, swipe from the top of the screen to the bottom.

Xiaomi does not see the computer via USB: why and what to do?

A smartphone is usually connected to a computer or laptop via a USB cable. For what? The reasons may be different: to charge the device, to transfer photos, videos, music, and so on. Sometimes users complain that the Xiaomi smartphone cannot see the computer (or the computer cannot see the smartphone). With what it can be connected? There are several versions and we will start with the most common.

The most common reason

So, you connected your Xiaomi smartphone to the computer, it is charging, the computer even sees it, you, in turn, observe something like the following on the monitor:

However, if you open the device, the folder will be empty. Why? The fact is that the Android operating system by default blocks access to the device’s file system, access must be provided from a smartphone. Why is this done? Yes, so that no one else can access the files that are stored on your device. Of course, this rule works only if access to the smartphone is closed with a password or, for example, using a fingerprint sensor. If this is your case, you need to allow access to the system, for which, first of all, open the notification panel by swiping from the top of the screen to the bottom.

Here click on “File Transfer (MTP)”.

Thus, you gave the computer access to the device, when you open the device, you will see the file system.

Check the USB cable and connector on your phone

The cable can be damaged, alas, this is not uncommon. Use a different cable.

Try cleaning the cable connector on your phone, it may just be clogged.

How to connect Xiaomi Redmi 4 to computer

Xiaomi phones may have a problem detecting the device on the computer after updating the Android OS version. To fix this problem, you need to enable USB debugging and switch to File Transfer (MTP) mode. Let’s take a closer look at all the steps that need to be taken to solve the problem with the phone connection. So, first we connect the phone to the computer, remove the lock mode and open the Settings → About phone option

We click several times on the MIUI version tab until you see the inscription below It is not necessary, you are already a developer.

Next, open Settings → Advanced

→ turn on Developer Mode, if it is suddenly turned off, and click on USB Debugging

→ click OK to enable USB debugging.

Next, close the settings and return to the main screen. Swipe down to open the top menu.

Here we select the option USB Charging.

The USB Usage tab appears. Here click on File Transfer (MTP).

Above should appear the inscription Transfer files via USB.

After that, on the computer, open the My Computer directory and right-click on an empty part of the screen. If your phone still does not see Windows, then in the context menu (right-click on an empty area), select Refresh.

Your mobile device along with the SD card will appear on the screen.

Manual for Xiaomi Redmi 4X 16Gb

This is the official instruction for Xiaomi Redmi 4X 16Gb in Russian, which is suitable for Android 6.0. In case you have updated your Xiaomi smartphone to a more “fresh” version or “rolled back” to an earlier version, then you should try other detailed operating instructions, which will be presented below. We also suggest that you familiarize yourself with the quick user guide in question. answer format.

If the operation manual did not help you find the answer, then please ask a question on the same page. We will definitely help.

We have compactly collected and presented all the necessary information from the Chinese site Xiaomi

Using a USB cable, connect your device to your PC. Select the option you want from the options on the screen

Find the “Updater” application, click “Check for updates”. Now you have Android 6.0 with the proprietary MIUI shell (mi-yu-ah)

Hold down the power button for a few seconds, select “Restart” or “Reboot”

It is necessary to remove the slot (using a paper clip), and install the SIM of the format provided by the instructions

To unlock bootloader on Xiaomi Redmi 4X use this instruction

Remove the slot and place the card so that it fits (contacts down)

Update. Reboot to Recovery Turn off the phone, hold down the POWER buttons VOLUME- / VOLUME

Either via Mi Cloud or using Recuva for Windows

Open the curtain and tap on the lantern

Go to “Contacts” and select the desired number, the “default melody” item will appear, press and scroll to the local item and click on the “other” item, there we already select the item you need.

Settings. SIM cards and mobile networks. Network type

Hold your finger on the desktop. Add. Click on the “Widgets” button

Settings. Lock Screen & Fingerprint

  • Through a browser, just download;
  • via a computer using a USB cable;
  • via bluetooth.
  • Contacts. Menu key. Import from SIM Import and export

Drop the mtz file to the memory card in the / MIUI / themes / folder Then visit the “Themes” section and apply it Restart

VOLUME MENU button. either release the curtain down and look for the Screenshot button there

Can’t unlock from the lock screen

How to set a ringtone for an SMS message or change notification sounds?

How to disable or enable vibration feedback from keys?

Settings. Additional settings. Language input. Android keyboard or Google keyboard. Key vibration feedback.

In MIUIv6, the usual function of the MENU key has been removed. In general, now you need to hold down the “Menu” button, with a single press, “Clear” will appear

How to find out which processor is on Redmi 4X?

Look at the specifications (there is a link above). But we can tell, this modification has a chipset. Qualcomm Snapdragon 435 nMSM8940.

Why the recorded video is not saved?

The microphone is in use by another application. Most often this is the OK Google service, which uses a microphone in the background. You need to disable the background work of the application.

How to connect Redmi4 mobile with computer?

Settings. SIM cards and mobile networks. Mobile Internet

Settings. Display. Brightness level

Settings. Power. Power Saving

How to set up the Internet if the Internet does not work (for example, MTS, Beeline, Tele2, Life or Yota)

  • Contact the operator
  • Read the instructions for setting up the Internet

How to add a contact to the blacklist or block a phone number?

To do this, use our recommendations, here is a detailed instruction

Go to Settings. For Developers. USB Debugging

Open Settings— Display :: Auto-rotate screen. uncheck

How to do this is indicated in the instructions for installing sounds on SMS and MMS

Reason 4. Errors in the firmware

Crashes occur in custom and sometimes official firmware. It is difficult to solve such a problem, it is often done by a radical method.

Solution: You need to do a factory reset or change the firmware if the first option did not help.

This should be done as a last resort, when you have already tried to do everything that is written in the article, and also studied the topic on the forums. The flashing of Xiaomi MI5 and Xiaomi Redmi 3S will be different, so look for a separate detailed instruction. Remember to make a backup.

A better option would be to ask a question to knowledgeable people or take your Xiaomi Mi Max or Xiaomi Redmi Note 3 or another smartphone to the service. After all, there is no 100% guarantee that a flashing will help fix everything, and an inexperienced user can do such things that problems with connecting to a PC seem like a trifle.

How to connect to a computer?

Connect should almost always be done via a USB cable. This method will provide full access to the file system and the ability to modify the firmware.

READ  Rear View Camera Backlit

Windows XP, newer builds are programmed to automatically pick up drivers for Xiaomi MI4 and other models, so you probably won’t even have to do anything.

The only thing to do is to do the following simple steps.

  • Connect the cord to the Xiaomi Redmi Note 4 socket, and insert the other end into the USB connector on the PC.
  • In the pop-up window on the computer desktop, select what needs to be done with the connected device.

This is all that is required by the vast majority of users, but sometimes there are problems in the process, or when connected, only charging is in progress, but files cannot be transferred. This usually happens on devices where there is no global firmware, so they run localized MIUI builds or custom Android systems.

Active camera connection

If the device is not recognized as a file drive, then you should try turning on the camera, this may help to work around the problem. To do this, the files that need to be reset should be transferred to the smartphone gallery, which will be available, and then moved to the desired directory on the device. By analogy, drop documents, for example, from the Redmi Note 3 Pro smartphone, first to the gallery, and then to the PC.

Other ways to solve problems

Be sure to try these tips too, if others did not help, they will help you avoid the firmware.

Reason 3. Wrong connection method

This usually does not happen, but all sorts of cases do.

Solution. Make sure again that the cable is firmly seated in the socket and that the USB port on the PC is working.

Problem 2. Drivers

The absence of a set of drivers in Windows for one reason or another will lead to the impossibility of connecting a smartphone to the computer.

Solution. You need to find out if your operating system supports automatic downloading of drivers, check their availability and version, clarify when they were updated and if they were updated at all. It is important to observe the Windows notifications after connecting the cable to your computer and smartphone. She usually reports that the process of selecting drivers is in progress, and at the end she says whether they are successfully installed or not.

If the installation failed, you can download them manually. Almost all Xiaomi phones (such as the Redmi Note 4X or the flagship MI6) have threads on the forums where you can download the latest drivers. After they are downloaded, you need to do the following:

  • unpack them (if it is an encrypted archive);
  • install it in a separate folder;
  • insert the cord into the phone and PC, click “My Computer” with the right mouse button, go to the “Device Manager” tab, a new connected device will be displayed there, which is the phone;
  • right-click on it and select “Driver”, now “Update”, then specify the folder where the drivers were installed.

The instruction helps, but remember that the gadgets are unique, and the approaches to Mi A1 may differ from those that are relevant for the same Xiaomi Redmi 3 Pro. If it does not work, refer to the topic of your device on the forums, read the instructions and tips. Almost 100% chance that there will be a hint.

Problems connecting the phone to the computer and their solutions

Let’s figure out what to do if the PC does not see the Xiaomi smartphone. It is rarely possible to immediately identify the problem, as there are dozens of options. Individual solutions for failures that are relevant, for example, for MI5S, will not work if you do the same for another device. Therefore, only those who are well versed in their phone will be able to understand the problem. Nevertheless, let’s highlight the most common ones that are found on all gadgets.

How to connect Xiaomi Redmi 4X to computer

Connecting Xiaomi Redmi 4X to a computer allows you to significantly simplify the work with the gadget and expand its functionality. Connect helps to carry out a number of manipulations, including:

  • data transfer (music, photos, documents);
  • using a smartphone as a storage device;
  • updating the firmware or installing custom assemblies;
  • debugging, getting Root and system changes.

Often, the connection occurs without any problems, but there are times when the computer does not recognize the device. We will consider popular ways to connect the device to a PC, as well as analyze the problems that may arise, and options for solving them.

How to connect Xiaomi to a computer via USB?

Let’s say you need to download photos from your phone to your computer. How to do it? The easiest way is to connect your smartphone to your computer using a USB cable. But in modern smartphones based on Android this is not enough, there are still some steps to be taken. Which ones? But right now we will tell you about them.

You will need a USB cable. If you suddenly forgot what it looks like, then you need an image of the cable:

Connect your smartphone to one side, the cable to the other side. to the USB port on your computer or laptop.

In the “My Computer” section, the smartphone was displayed as a portable device.

Everything? If only: in modern versions of Android, you cannot open a device with files until you give access from the device itself. If you open the device in My Computer, you will not see anything (not relevant for older versions of Android). Therefore, pick up the phone and swipe from the top edge of the display to the bottom so that the notification panel appears.

And now, when you open the device through “My Computer”, you will see its file system.

By the way, if you select Photo Transfer (PTP), the device will appear in My Computer as a digital camera. Only images are available in it.

If the device is not displayed

In this case, you need to enable USB debugging. First, enable developer mode according to this instruction. Then go to the developer section, enable it:

Then do the same as in the first part of the article.

Second way

For a computer, you can try out the Mi PC Suite from Xiaomi.

Then you can use it as a file manager.

Way

For this method, we need the Android terminal emulator program. It can be downloaded from the Play Store. After that, we connect the smartphone to the PC and there are 2 options:

When a computer is connected to a smartphone, the latter will display a connection notification, which will disappear after a few seconds. If you didn’t have time. open the curtain and press.

A new window “USB Usage” will open and then you need to select the file transfer mode.

You need to go to the phone settings, then additionally for developers USB debugging. enable. In more recent versions of MIUI, this item is located under Settings Advanced settings For developers USB debugging. If you do not have developer mode unlocked, then you will not find this item in the menu.

After enabling the mode. activate USB debugging.

Way

Another 1 option. on the PC go to the Start menu Devices and Printers and select there the model of your smartphone (if it appears), for example, Xiaomi Redmi Note 9. Hover over it and right-click (RMB) troubleshoot update the driver.

Next, go to My Computer and an icon with access to the phone’s memory should appear there.

If you want to connect your phone as a media device (MTP):

  • Open the terminal and write su, then click to confirm.
  • We write setprop persist.sys.USB.config mtp, adb and press enter.
  • Now we write reboot, press enter and the reboot will start,

How to connect Xiaomi to a computer

How to connect Xiaomi to a computer? It would seem that it could be easier. I took a USB cable and connected the PC to the smartphone. Usually in such cases, Android devices are detected and connected automatically, but what if this does not happen? There are several ways:

To connect in USB mode:

At the second point, enter setprop persist.sys.USB.config mass_storage, adb

This method has helped many owners of Xiaomi phones, so try it, maybe it will solve your problem too.

I’m shocked by this Chinese craft! Native MiPCSuite does not work on Redmi note 4! But third-party software detects the phone, etc.

a similar situation, neither with the native cord, nor through the developer, in any way

Method 4 did not help on Redmi Note 4X. the terminal emulator does not execute the listed commands. Option 3 too. troubleshooting does not offer to update the driver. it checks itself and writes that no problems were found.

The first 2 options, respectively, are not suitable by definition, otherwise I would not be looking for an answer to this question. The question is, how can I change the Avast antivirus so that the For Developers menu item appears? And then something does not want to go to the factory settings.

The same situation, besides, how can I throw off the information that I need from my phone and at the same time I cannot connect to any PC?

Elsewhere I found how to enable developer mode. Antivirus turns out to be nothing to do with it. https://migeek.ru/assistance/kak-podklyuchit-smartfon-Xiaomi-k-kompyuteru

SUPER! The first method helped. And in the 34-page manual there was no room for three lines! Using another link on the Web, I first read a long and tedious instruction with suggestions such as reinstalling firewood or even (!) Returning to the factory settings. A big human THANKS, In whose name the check should be sent?

Thank you very much! The first way worked!

You can also use software like MyPhoneExplorer and connect via WI-FI

Xiaomi Redmi 5 helped with the first tip. Thanks

And with Windows XP, which of these methods works?

Via WI-FI. We call the Explorer, at the top left we call the Menu (three horizontal mowing lines) and select FTP from the menu. We see the server address, write it down on a piece of paper. Now, on the desktop, we type this address and find ourselves directly in the Xiaomi Explorer. This is if the router is on, Wi-Fi is present, the smartphone is on and switched to FTP mode.

Yoshkin cat. Where have you been before. The computer saw all the phones and Xiaomi completely ignored them. I broke my whole head.

Thanks. I connected the phone using the first method, but the computer does not see the SD-CARD with the photo. What to do?

Redmi 5a does not connect to a laptop with win 8.1 None of the steps from the instructions helped. Developer mode, USB debugging, MTP

I have the same problem on Mi 6, and the battery has stopped charging quickly ((and everything after updating to MIUI 10

After connecting to the PC, go to My Computer. find your smartphone there and look for the DCIM folder

Friends, I took the cord from my old phone, microusb, and it worked! A window has appeared on your phone where you can choose to transfer files! Used an adapter from tipe-c to microusb for the cord! It didn’t work out otherwise! In general, change the cord

I have two smartphones Redmi 4a and 3 After, after updating the latest version of Win10 64 (version 1809), on PC Redmi 3 is no longer detected in the system, and charging is in progress.It is visible through MyPhone, but the conductor does not see it, and of course it is impossible to use it through a computer for the implementation of a number of programs, for example, as an external modem, which is very important for me. I also installed the latest drivers, but things are still there. Redmi 4 does not have these problems. Can someone tell me what to do.

READ  How to connect i12 headphones to iPhone

In addition, I will say the following. I do not recommend updating Redmi 4a to version Global 10.2 and 10.1 there are jambs in a number of modes, including in the disabled screen lock mode., For example, it is impossible to activate a SIM card (more precisely, it is possible, but very difficult), and so answer an incoming call

The same trouble after the update. Mi max 2 is detected on the PC, but the content cannot be seen.

Solved the problem. In the section for developers there is a subsection “USB configuration”. I entered it and switched between different points of this subsection. As a result, I went to the MTP, as it was. The problem disappeared!))

Probable causes of the problem

Surely each of you has heard the saying “if you don’t know the ford, don’t go into the water.” But many of us broke this rule by purchasing new Chinese smartphones, the functionality of which is not particularly clear for a Russian person. Therefore, today we have to thoroughly analyze each of the problems prepared for us by manufacturers from China. The most likely causes of problems with connecting your smartphone to the “PC” may be:

  • Non-original USB cable;
  • Wrong way to connect to PC;
  • Lack of required device drivers;
  • Device system errors and more.

Of course, this is not a complete list of all possible reasons. there can be several tens of times more of them in life. However, these are basic. Next, we will describe in detail every method we know to resolve this problem and will not only show you how to connect your phone to a PC, but also tell you how to make this process as simple as possible. These tips will help even if your laptop does not see the phone connected to it at point-blank range.

Driver installer

By the way, if we return to the same problem of lack of drivers, we would like to advise you the MiPhoneManager program (27 MB). with its help you will forever get rid of the question of why there are none. Download, unzip and install it, then connect your smartphone to your PC. Right click on “My Computer”, go to “Task Manager”, find the phone and USB cable that were not recognized by the computer, click on it and select Driver. Update. Then specify the path C: \ Users \ ComputerName \ AppData \ Local \ MiPhoneManager \ main \ Driver and click on “Next”. Done, Problem Solved!

Other ways to solve the problem

Terminal usage

In order to use this method, you need to have root-rights, first you need to install a program from the Play Market called Android Terminal Emulator. with its help you will open access to the gadget as a USB drive. After installing the program, connect the phone to the PC and write the following commands in the program:

  • su (root-rights enabled) confirmation of the choice;
  • setprop persist.sys.USB.config mass_storage, adb Enter;
  • reboot (restart the phone)

If you want to connect to the PC via MTP, then in the second command replace mass_storage with mtp and boldly press Enter.

Restore connection settings

In this method, we will use a program that is not available in the Play Store. it is called QCustomShortcut (100 KB). Thanks to it, you will be able to access all the connection settings that might disappear after the first selection, which happens quite often. Run the program, and in the second line (Package) select com.Android.settings, and where Class. com.Android.settings.UsbSettings, then click on Create Shortcut and enjoy the result. How to enjoy it? Very simple. You get access to all connection settings just by clicking on the shortcut.

If the connection is in camera format

After we looked at the two most commonly used ways to fix the error, let’s look at the third one. although it is simple, it is unusual. It happens that the smartphone connects to the PC in camera mode, where the photos you took earlier are displayed on the phone. In this case, try to transfer the files you need from the PC to the folder with the photo, and then from there through the file manager to specific destination folders. But this method is suitable for those who do not want to bother and look for the true root of the problem.

How to connect Redmi to computer?

How to Connect Phone to Computer. Xiaomi Redmi Can’t See USB Driver

  • We connect the smartphone to the computer with a USB cable.
  • The USB Charging tab appears on the screen
  • Click on it and select “File Transfer (MTP)”

How to connect Xiaomi Redmi 3 to a computer?

If the phone does not connect to the PC on its own, you will have to do it manually. In the menu “USB-connection to a computer” there is a subsection of media device (MTP). you must put a tick on it. You need to click “connect USB as a storage”, if necessary. A dialog box will appear in which you need to click OK.

Why the phone won’t connect to the computer?

Why the computer might not detect the phone or tablet

Possible reasons include incorrect connection actions, outdated or incorrectly configured software, faulty USB cables, ports, or the devices themselves. Follow the tips below, they can save you many connection problems.

How to enable USB debugging on Xiaomi?

  • Return to the main settings menu, find the “Advanced settings” sub-item there, go to it.
  • Select the option “For Developers” that appears at the very bottom.
  • Scrolling down the list of options, find the “Debug” group, and move the “Debug via USB” slider to the active position.

What to do if Mi PC Suite can’t find your phone?

no electrical contact between PC and phone; drivers are out of date; the wrong connection mode is selected; debug mode enabled.

How to Transfer Files from Computer to Xiaomi?

If you have a fresh version of MIUI on Android 6.0 and higher, then in order for a computer or laptop to “see” the contents of your device, you need to swipe across the screen from the top of the screen to the bottom. A notification panel will appear, where you need to click on the “Charging via USB” line. Then select “File Transfer (MTP)”.

Normal connection

This is the easiest and most affordable way. It is suitable for Xiaomi Redmi 5 Plus, Remi 3, 5A, Mi6, 4A Mi A1, Note 4 and other devices from this manufacturer. The algorithm of actions is extremely simple.

  • First, you need to find and install drivers for the device. Please note that this item is relevant only for those who still have Windows XP on their computer. “Seven” and other versions of Windows install the necessary software themselves. Immediately after connecting the smartphone via USB.
  • Now you need to connect Xiaomi to your computer using a USB cable.
  • On the screen of the device, in the menu that appears, select the item “File transfer”.
  • If the user has Windows 7 or higher on the computer, then the system will install the necessary drivers for a few seconds.
  • Once the software is installed, you will need to open Windows Explorer.
  • The list of devices connected to the PC will contain the desired device (for example, Redmi 4X). Double click on it.
  • Select the drive to which you want to transfer files (Micro SD or internal memory).
  • We open another explorer window, go to the desired directory and transfer the files to the smartphone.

The above algorithm works in most cases. Photos, music and other content can be transferred from phone to PC in the same way. But what if the computer can’t see the phone? This will be discussed when considering the next method.

How to connect Xiaomi phone to computer and transfer photos

Smartphones have long ceased to be devices exclusively for communication. Now these are real multimedia centers. And sometimes users have to transfer images, music and other content to them. But how to do it right?

So, you can connect Xiaomi to a computer in order to transfer photos, music and videos in several ways. Almost all of them require an original data cable. Or any micro USB cable.

You can also transfer files via Bluetooth, but this method has several disadvantages. First, the computer must have a Bluetooth adapter. And secondly, through a USB cable, the data transfer rate is always higher.

Let’s look at the main methods of transferring data using a USB cable step by step.

If something went wrong

It also happens that the first option with Xiaomi phones is not suitable. And it is impossible to drop anything from them onto a PC or laptop for the reason that the computer simply “does not see” the device. There are several solutions to this problem.

  • First you need to check if the correct drivers are installed. If a yellow question mark is displayed in Device Manager while the smartphone is connected to the computer, then there are no drivers. In this case, you need to download and install them.
  • If everything is in order with the drivers, then you need to try turning on the USB debugging mode in the smartphone. There is no universal instruction on this, but this option is in the “For Developers” section. However, you still need to access this item. To do this, go to the “About phone” menu, find the inscription “Current version of MIUI” there and click on it 10 times. After that, the message “You have become a developer” will appear. After enabling USB debugging, everything should work.
  • If the drivers are not installed on the PC, then you need to disable digital signature verification. To do this, boot Windows in safe mode (F8 at startup) and disable the digital signature verification of drivers in the system settings. Then we reboot the PC and reconnect the device to the laptop or computer.

All of the above options help to eliminate all sorts of errors when connecting to a PC. You can send a photo from Xiaomi to a computer using the algorithm that was described in the first chapter. But first you need to deal with connection problems.

Most radical

It is only used if everyone else fails. Connecting a Xiaomi smartphone to a PC or laptop can be done using the console. over, the console will be used in a mobile gadget. But first you need to enable USB debugging on the device and get Superuser rights.

  • We open the console in the device (it will be located somewhere next to the superuser icon) and enter “su” in it. Click “Confirm”.
  • Next, enter the command “setprop persist.sys.USB.config mtp, adb” and press “Enter”.
  • After that, enter “reboot” and press “Enter”.

The device will restart, after which it will be possible to connect the smartphone to the computer in media device mode. Namely, this mode is used for data transmission. The rest of the connection modes are not needed in this situation.

READ  How To Connect The Camera To The Monitor

Attention! The latter method of connecting the machine to a computer should be used with a certain degree of caution. The fact is that when using this particular method, the firmware files are changed. And just one mistake in the command being entered can turn a smartphone into a “brick”.

So, connecting your Xiaomi smartphone to your computer or laptop to transfer files is pretty simple. In most cases, the first method helps easily. But keep in mind that you only need to connect via a USB cable. There is no other way.

How to connect Xiaomi Redmi 4x to a computer via USB?

How to connect Xiaomi Redmi 4 to computer

  • We click several times on the MIUI version tab until you see the inscription at the bottom It is not necessary, you are already a developer.
  • → For developers
  • → turn on Developer Mode, if it is suddenly turned off, and click on USB Debugging.
  • → click OK to enable USB debugging.
  • The USB Usage tab appears.

How to transfer photos from Xiaomi to computer via USB?

If you have a fresh version of MIUI on Android 6.0 and higher, then in order for a computer or laptop to “see” the contents of your device, you need to swipe across the screen from the top of the screen to the bottom. A notification panel will appear, where you need to click on the “Charging via USB” line. Then select “File Transfer (MTP)”.

How to display phone screen to PC via USB?

Outputting Android Screen to Computer via USB Connection

  • open the “Settings” section;
  • go to the item “For the developer”;
  • activate USB debugging mode on the phone itself;
  • connect the phone to the computer using a cable;
  • confirm permission to debug over USB connection.

How to connect to a computer Xiaomi Redmi 4x?

insert the cord into the phone and PC, click “My Computer” with the right mouse button, go to the “Device Manager” tab, a new connected device will be displayed there, which is the phone; right-click on it and select “Driver”, now “Update”, then specify the folder where the drivers were installed.

How to Download Files from Redmi 4x Phone to Computer?

The process is very simple: Plug the MicroUSB cable into your phone and then connect it to your computer. If the connection is successful, Redmi 4x will start charging. Some time after connecting the smartphone with a USB cable, a new device with the name of your model should appear in the “My Computer” section.

Why can’t I connect my phone to my computer via USB?

What to do if the computer does not see the USB device

  • Disconnect unnecessary USB devices from your computer.
  • Try to connect with a different cable or port.
  • Restart your computer and mobile device.
  • If you are on Windows, update the driver required to recognize the USB device.

How to connect Xiaomi phone to computer via USB?

To connect a Xiaomi smartphone to a personal computer: insert the USB cable (which comes with the Xiaomi phone) into the smartphone and computer; then the system automatically detects the device and starts the process of charging the smartphone (by default on MIUI firmware);

Reason 3. Wrong connection method

This usually does not happen, but all sorts of cases do.

Solution. Make sure again that the cable is firmly seated in the socket and that the USB port on the PC is working.

Ways to connect Xiaomi Redmi 4X to computer

Connecting Xiaomi Redmi 4X to a computer allows you to significantly simplify the work with the gadget and expand its functionality. Connect helps to carry out a number of manipulations, including:

  • data transfer (music, photos, documents);
  • using a smartphone as a storage device;
  • updating the firmware or installing custom assemblies;
  • debugging, getting Root and system changes.

Often, the connection occurs without any problems, but there are times when the computer does not recognize the device. We will consider popular ways to connect the device to a PC, as well as analyze the problems that may arise, and options for solving them.

Enabling USB Debugging

This often helps to eliminate difficulties with connection, you can activate debugging through developer mode. It is not difficult to turn it on, you need to click on the MIUI version 7-10 times in the “About phone” settings (if you have a custom on Android, then in the same paragraph tap on “Build number” the same number of times).

  • In MIUI, go to Settings → Advanced → For Developers. Find “USB Debugging” there and activate it.
  • On Android go to Settings → For Developers and enable USB Debugging.

Connect your phone to your computer and see if the choice of connection method appears in the shutter, if yes, then click on MTP or “File Transfer”. If there is no selection, and the device is still not visible to the PC, then “USB debugging” did not help.

How to connect to a computer?

Connect should almost always be done via a USB cable. This method will provide full access to the file system and the ability to modify the firmware.

Windows XP, newer builds are programmed to automatically pick up drivers for Xiaomi MI4 and other models, so you probably won’t even have to do anything.

The only thing to do is to do the following simple steps.

  • Connect the cord to the Xiaomi Redmi Note 4 socket, and insert the other end into the USB connector on the PC.
  • In the pop-up window on the computer desktop, select what needs to be done with the connected device.

This is all that is required by the vast majority of users, but sometimes there are problems in the process, or when connected, only charging is in progress, but files cannot be transferred. This usually happens on devices where there is no global firmware, so they run localized MIUI builds or custom Android systems.

Active camera connection

If the device is not recognized as a file drive, then you should try turning on the camera, this may help to work around the problem. To do this, the files that need to be reset should be transferred to the smartphone gallery, which will be available, and then moved to the desired directory on the device. By analogy, drop documents, for example, from the Redmi Note 3 Pro smartphone, first to the gallery, and then to the PC.

Other ways to solve problems

Be sure to try these tips too, if others did not help, they will help you avoid the firmware.

Problem 1. Non-original cable

There is a small chance that trying to make a USB connection that is not original will result in your Redmi 4A not being detected by Windows.

Reason 4. Errors in the firmware

Crashes occur in custom and sometimes official firmware. It is difficult to solve such a problem, it is often done by a radical method.

Solution. You need to do a factory reset or change the firmware if the first option did not help.

This should be done as a last resort, when you have already tried to do everything that is written in the article, and also studied the topic on the forums. The flashing of Xiaomi MI5 and Xiaomi Redmi 3S will be different, so look for a separate detailed instruction. Remember to make a backup.

A better option would be to ask a question to knowledgeable people or take your Xiaomi Mi Max or Xiaomi Redmi Note 3 or another smartphone to the service. After all, there is no 100% guarantee that a flashing will help fix everything, and an inexperienced user can do such things that problems with connecting to a PC seem like a trifle.

Broken micro USB slot on the gadget

A burned out or broken connector is a very frustrating problem. They are solved exclusively by replacing the slot in the service center.

Smartphone connected like a camera

This type of connection provides for the synchronization of photo and video files, so the main storage of the phone is not displayed on the PC. In other words, if Redmi 4x is connected in this mode, you will not be able to use it as a removable media.

You can change the mode through the connection notification in the status bar: pulling out the curtain, you must click on it and select the “File transfer” item.

In most cases, the above methods help to eliminate the trouble in which the computer does not see the Xiaomi Redmi 4x, however, there may be the following reasons for the problem:

What to do if the computer does not see Xiaomi Redmi 4x?

The Redmi 4x turns out to be surprisingly balanced in terms of performance, with MIUI firmware being considered one of the best Android adaptations. Nevertheless, the owners of the device often have one small nuisance. when connected, the computer does not see the Xiaomi Redmi 4X. It interferes with moving files between devices and syncing data.

The reasons why the PC does not see the Redmi 4X phone can be different. Fortunately, most of the problems are not serious, so fixing the problems is straightforward. Let’s consider the possible causes and ways to eliminate them:

USB debugging mode not enabled

Sometimes devices refuse to interact with the PC if this function is not enabled. To activate debugging, you need to do the following:

  • Go to smartphone settings;
  • Select the section “About phone”;
  • Press 7 to 10 times on the item “MIUI version”, after which you will have access to the developer mode;
  • In the window that appears, first activate the “Developer settings” switches, and then “USB debugging”;

Lack of drivers on the computer

Usually, the drivers are installed automatically after the first connection of the smartphone to the PC, however, if this has not happened, you should download and install the drivers yourself. You can find a driver for Redmi 4X for your operating system on the w3bsit3-dns.com website by using the forum search. If after installing them the computer still does not see the phone, move on.

USB cable does not work

If the wire is damaged, the smartphone and PC will not be able to recognize each other. At the same time, the computer and the phone can even react to the connection to each other. Examine the cable and its pins carefully for damage. Naturally, the only solution will be to buy a new USB cable.

MicroSD problems

Sometimes the internal storage of the device is displayed, but the computer does not see the memory card. In this case, try to remove it from the connector, restart the smartphone and insert it back. If this does not bring success, it is worth contacting the service, since the problem may lie in the breakdown of the card itself or the slot.

If you know other reasons and their solutions, please share them in the Комментарии и мнения владельцев.

BYRGPUB.COM 2021