Rear view camera shows an inverted image

Posted on : 27.02.2021
Article 

The BC 35 wireless reversing camera closely monitors what is happening behind your car

  • Ideal for drivers of trucks and cars with large dimensions;
  • 160 ° wide-angle viewing angle, shows what’s behind your car when reversing;
  • Built-in Wi-Fi® transfers live camera images from the BC 35 directly to the display of a compatible GPS navigator;
  • Wireless transmission of images from the camera at a distance of up to 14 meters (range depends on the installation);
  • Durable enough to withstand any harsh weather conditions.
rear, view, camera, shows

Wireless rear view camera BC 35

A quality reversing camera like the Garmin BC 35 is ideal for truck and heavy transport drivers and is compatible with the dēzl 780 LMT-D and dēzl 785 LMT-D navigators. Significantly improves the driver’s rear view and helps minimize the risk of accidents in the blind spot when reversing.

Don’t worry when reversing

Combined with a compatible GPS navigator, the BC 35 wireless reversing camera is a Wi-Fi-enabled multipurpose camera that helps drivers easily locate vehicles, pedestrians and other hard-to-see obstacles behind your vehicle.

When the camera is connected to a reversing light to provide power, a compatible Garmin navigator can automatically display the camera footage whenever the vehicle shifts to reverse. and return to navigation mode when shifting into forward gear. Alternatively, you can connect the system to constant power, which allows you to switch between navigation and backup display modes with the push of a button.

On-screen guidance lines can be adjusted to suit the size of your vehicle to help drivers measure reversing distance more easily. Up to 4 cameras can be used in one system for different viewing angles when reversing.

Garmin BC 35 Wireless Rear Camera Compatible Devices:

Reverse Camera Inverted Image

Garmin BC 35 Wireless Camera Specifications

Camera and transmitter input voltage 9 to 28 VDC current
Transmitter fuse 500 mA fast
Current consumption of camera and transmitter 150 mA @ 12 VDC current
Waterproof (camera) IEC 60529 IPX7
Waterproof (transmitter) Not waterproof
Operating temperature range 20 ° to 70 ° C (4 ° to 158 ° F)
Unit weight 235 g
Camera cable 150 cm
Wireless transmitter cable 80 cm

The camera can withstand accidental immersion in water to a depth of 1 m for up to 30 minutes.

Connection

Wired. the camera and screen are connected with a cable. This option is cheap, reliable, resistant to radio interference and provides a high-quality image. Minus. complex installation.

Wireless. the camera and monitor are connected via radio waves. This solution makes it easier to install the device, but the picture quality deteriorates with radio interference.

Video signal standard

The video signal standard or color system is most often either American (NTSC) or European (PAL). This parameter is necessary for the correct choice of the monitor for the camera: the video signal standard in both devices must be the same. Most modern models support two color standards.

How to choose a rear view camera

Rear view camera. used to provide visibility in blind spots that are not visible from the driver’s seat directly or through a mirror. The rear view camera is installed on the rear bumper, body and some other places. The camera is usually activated when reverse gear is engaged. Practice shows that such a device greatly facilitates the parking of a vehicle.

A rear view camera is purchased separately or complete with parking sensors, a monitor (often a mirror-monitor). Surround view systems consist of several cameras and a central control unit.

In addition to rear–view cameras, front cameras are used, which are most often mounted on the front bumper. Such devices are turned on manually.

Standard. manufactured for a specific car brand, which greatly facilitates its installation. The standard model is installed without damaging the car, while the camera itself is invisible to others. Cons: High price and limited selection of such cameras. Such a camera is located in a regular place under the camera or on the plafond of the rear license plate illumination.

Rear view camera image Flip(left/right)| Laterally inverted | How to reverse image of the car camera

Important: the car brand means the manufacturer. Therefore, when choosing a camera, pay attention to its compatibility with a specific car model of the corresponding brand.

Universal. mounted on any car, but noticeable to others, and installation is often accompanied by damage to the surface of the car (on screws). An alternative to such a mount can be double-sided tape, but this option loses in reliability. The universal camera is located on the bumper, license plate frame and other places suitable for mounting.

Versatile camera for rear, front and side view.

Versatile cameras are divided into three categories.

  • Mortise. invisible, but for installation it is necessary to drill the rear bumper. Fasteners. latches and lock nuts.
  • Invoice. mounted on the body or secured with brackets. The disadvantage is the same as that of the mortise model.
  • In the license plate frame. easy to install, but this advantage has a downside: such a model often becomes easy prey for thieves (along with numbers).
  • Cut-in chamber
  • Overhead camera
  • Number frame camera

Direction of view

Rear. displays the picture in mirror mode so that the driver does not get confused in the sides.

Front (front or front camera). unlike the previous version, it shows the image in live mode.

Side (side camera). as in the previous version, provides an image in direct mode. Side cameras are installed in side mirrors.

Circular (all-round view system). provided by multiple cameras (rear and front view and side view).

Signal / noise

The ratio of these parameters affects the image quality. The higher the signal-to-noise ratio, the less noise and distortion will be in the picture. The optimal value is 40 dB (acceptable quality). In more advanced models, this figure is 48-50 dB (ideal picture).

The matrix

Important: there are CMOS matrices that have a high light sensitivity comparable to the parameters of a CCD matrix. The rear view camera usually operates in sufficient lighting conditions to obtain a satisfactory picture.

CCD. compares favorably with the previous matrix in high image quality (especially in low light), but its price is also higher. The disadvantages of CCD include low image processing speed.

HCCD is an improved version of the previous version. Such a matrix produces a better image in low light conditions than a CCD, but it costs even more.

The higher the resolution of the matrix, the better the image (especially in low light conditions). The resolution in the rear-view cameras does not exceed 0.3 megapixels (640×480 pixels). this is quite enough.

The size (diagonal) of the matrix is ​​measured in inches. The higher this parameter, the less distorted the picture. This is important when working in low light conditions. At the same time, the image quality depends not only on the size of the matrix.

Picture Mode

Direct display. the driver sees the same picture as the camera.

Mirroring. the driver sees a converted picture in which the right and left sides are reversed. Thus, the perception of the image is facilitated. it becomes similar to the picture from the rear–view mirror.

Direct / Mirror Image. the ability of the camera to work in both modes.

SsangYong New Actyon Lovers Club: Rear View Camera

  • Group: Advanced
  • Posts: 90
  • Registration: 02 October 12
  • Account: 145.2 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • City: Severomorsk
  • Interests: auto

  • Group: Dear Sangyong Waters
  • Posts: 737
  • Registration: 12 May 14
  • Account: 399.9 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • Tula city
  • Interests: Volleyball, summer cottage, auto

  • Group: Advanced
  • Posts: 90
  • Registration: 02 October 12
  • Account: 145.2 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • City: Severomorsk
  • Interests: auto

  • Group: Dear Sangyong Waters
  • Posts: 737
  • Registration: 12 May 14
  • Account: 399.9 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • Tula city
  • Interests: Volleyball, summer cottage, auto

  • Group: Advanced
  • Posts: 90
  • Registration: 02 October 12
  • Account: 145.2 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • City: Severomorsk
  • Interests: auto

The post has been edited by Catofei on October 13, 2012 09:58 AM

  • Group: Honored Sangyong
  • Posts: 1 618
  • Registration: 19 Dec 11
  • Account: 112.2 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • City: Noginsk
  • Interests: Family, fishing

  • Group: Dear Sangyong Waters
  • Posts: 737
  • Registration: 12 May 14
  • Account: 399.9 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • Tula city
  • Interests: Volleyball, summer cottage, auto

  • Group: Honored Sangyong
  • Posts: 1 618
  • Registration: 19 Dec 11
  • Account: 112.2 rubles
  • Vehicle: SsangYong New Actyon
  • Gender: Male
  • City: Noginsk
  • Interests: Family, fishing

There have been systems for up to 4 cameras for a long time. There, just one radio tape recorder settings cannot be dispensed with.!

Well, at least someone will lay out how to stretch the camera through the salon with pictures. An acquaintance at KIA pulled through the roof with a broach, I’m thinking of cutting off the “tulip” to make it easier to pull. but for now I will wait a little more.
I heard some cameras are screwed onto the upper pillar of the fifth door inside the cabin, there it will never get dirty, and you can clean the stained glass with a wiper, this is an option. Only light sensitivity should be good for those who have toning.!

Post has been edited by alexxxx777 on October 14, 2012 13:45

BYRGPUB.COM 2023