Rear View Camera Retractable

Posted on : 21.11.2020
Article 

How to accurately choose a wonderful device for parking. rear view camera?

rear, view, camera, retractable

The modern electronics market offers motorists a wide range of all kinds of devices designed to provide more comfortable control. One of these devices is a rear view camera. with its help, the driver can park without problems even in difficult conditions. What parameters should be considered when buying and how to properly connect the device. we will talk about this below.

Rear View Camera Technical Parameters

Video “Review of the rear view camera from China”

Rear View Camera Technical Parameters

A standard rear-view camera is used to transfer the image from the lens to the display located in the car’s interior, usually on the dashboard. The gadget with or without backlight can be connected to an existing audio system monitor, navigator, or to an additional display. It should be noted that a standard rear-view camera is now installed on most modern cars, but here a lot depends on the configuration. If the device is equipped with a backlight, as well as a variable viewing angle, then the driver can easily park the vehicle even in poor visibility conditions.

Video from the gadget on the OEM monitor

When buying a rear view camera, you must rely on the following parameters:

  • One of the highlights. this is the viewing angle. It should be over 110 degrees. best if 150 or 170, this will provide the most optimal view.
  • It is important that the picture is transmitted to the display in a mirror image, otherwise the operation of the device may cause difficulties.
  • It is necessary that the device be resistant to various environmental influences. That is, the camera should function normally in any weather conditions, be it fog, heat or blizzard. Pay attention to the operating temperature range.
  • The clarity of the picture, which determines the resolution. If you prefer the more affordable options, then the image resolution will be 720,576 or so. expensive options work with HD or FullHD.
  • The presence of markings, thanks to this, the device will allow you to park the car with an accuracy of 0.1 m.The most convenient option is a rear-view camera with dynamic markings.
  • Thanks to additional infrared illumination, you can achieve a better picture, in particular, when parking a car in the dark.

Video from the gadget on the rearview mirror

It should also be noted that the matrix of the device is considered a rather important aspect.

It can be manufactured using one of the technologies:

  • KPOM. In practice, such devices are not efficient enough in low light, the image quality is poor. However, the matrices of such devices have a more progressive scan, that is, the display will consistently receive both low-quality and higher-quality signal times. In addition, the cost of such devices is much lower.
  • CCD. They are more expensive in price, but this is due to the transfer of a better picture to the display, even in very low light areas. Among the shortcomings, one should single out a higher energy consumption, as well as a slow speed of work.

What are?

The modern electronics market is actually teeming with various types of cameras, they can be divided among themselves according to the installation site:

  • Universal gadgets. They are installed in specially designated places.
  • Cameras built into the license plate frame, moreover, this frame must be included in the set with the device.
  • Standard systems. They are installed at the stage of assembling the car at the factory (video author. Channel Made in the garage).

Now, briefly about the features of each species. Universal systems have many advantages, especially when compared with standard devices. In particular, they have a simpler design, so that their setup should not be difficult. In addition, they are usually not very expensive, especially since such devices are usually sealed and resistant to damage, scratches, and moisture. On sale you can also find a device designed for mounting in a bumper.

Typical disadvantages of such devices:

  • Installation of the device will require drilling the bumper;
  • Weak protection against damage;
  • The device will NOT allow you to adjust the viewing angle.

As for the devices built into the license plate, this is an easier option. Since the frame comes with the kit, it can be easily installed instead of the standard one, especially since the motorist will have the ability to independently adjust the viewing angle. In addition, the installation of such a device is possible on a car of any model, while it is considered universal. The temperature range of use is on average from 30 to 50 degrees. Of the minuses, one should highlight the ease of access to the device, as a result of which anyone can dismantle or damage the device (the author of the video. Channel volodamdes).

One of the most optimal options is standard devices. They are usually mounted in the tailgate handle or license plate light. But the place of installation may be different, it all depends on the manufacturer. Thanks to the presence of infrared illumination, which is in all standard devices, parking will not cause problems at night.

The main advantages of such systems:

  • Manufactured taking into account the characteristics of a particular vehicle;
  • Equipped with backlight;
  • During installation, the manufacturer himself sets the required viewing angle, taking into account all the nuances.

In addition to the above three options, you can find devices with a display built into the rearview mirror. But this option is less convenient for the consumer. As for the mounting method, the device can be built-in or retractable.

Photo gallery “Varieties”. Connection

The built-in or retractable rear-view camera connects to the display of the radio, navigator or additional monitor. For installation and connection Use the diagram that comes with the kit.

Briefly about how to install a built-in or pop-up camera:

  • First, you must turn off the battery power to prevent short circuits during installation.
  • Then the display is mounted, if it is optional. If the camera will be connected to the screen of the radio, skip this step. The screen is installed on the center console.
  • Next, the lens itself is installed. it is mounted either in the bumper of the car or in the frame of the license plate, depending on the type. When installed in the bumper, it will have to be removed and drilled. The corresponding holes. If we are talking about the number frame, then you just need to replace it.
  • After that, the wiring is laid. The power cable from the lens must be connected to the reversing optics. The wire that transmits the image is brought into the car interior under the casing and laid to the monitor, after which it is connected to it.
  • Now you just have to connect the battery and check the functionality of the gadget.

Rear view cameras

  • Brand: Falcon
  • Model: RC110-HCCD
  • Purpose: rear view / front view
  • Color system: NTSC
  • Photosensitive Element: HCCD
  • Resolution: 480 TV lines
  • NTSC Pixel Number: 720×576
  • Horizontal viewing angle: 140 degrees
  • Minimum illumination: 0.1 Lux
  • Parking markings:
  • Brand: Falcon
  • Model: RC120-SCCD
  • Purpose: rear view
  • Type: Threaded Mount
  • Color system: NTSC
  • Photosensitive Element: SCCD
  • NTSC Pixel Number: 720×576
  • Horizontal viewing angle: 170 degrees
  • Minimum illumination: 0.05 Lux
  • Parking markings:
  • Brand: Falcon
  • Model: RC150-SCCD
  • Purpose: rear view
  • Type: mortise
  • Color system: NTSC
  • Photosensitive Element: SCCD
  • NTSC Pixel Number: 720×576
  • Horizontal viewing angle: 170 degrees
  • Light sensitivity: 0.5 Lux
  • Parking markings:
  • Brand: Falcon
  • Model: RC150-HCCD
  • Purpose: rear view / front view
  • Color system: NTSC
  • Photosensitive Element: HCCD
  • Resolution: 480 TV lines
  • NTSC Pixel Number: 720×576
  • Horizontal viewing angle: 140 degrees
  • Minimum illumination: 0.1 Lux
  • Parking markings:
  • Reverse image:
  • Type: mortise
  • Brand: Falcon
  • Model: RC140-HCCD
  • Purpose: rear view
  • Type: Threaded Mount
  • Color system: NTSC
  • Photosensitive Element: HCCD
  • NTSC Pixel Number: 720×576
  • Horizontal viewing angle: 140 degrees
  • Sensor. color, CMOS;
  • Viewing angle. 140 degrees;
  • Light sensitivity. 0.2 lux;
  • Resolution. 728×582 / 728×512;
  • The degree of moisture protection. IP68;
  • The number of TV lines. 480;
  • Working temperature. 30 70;
  • Power cord length. 120 cm;
  • Video signal wire length. 600 cm;
  • Parking markings.
  • Dynamic parking lines;
  • Sensor. color, SONY CCD;
  • Food. 12V;
  • Viewing angle. 170 degrees;
  • Light sensitivity. 0.1 lux;
  • Resolution. 728582/728512;
  • The degree of moisture protection. IP68;
  • The number of TV lines. 520;
  • PAL / NTSC;
  • Sensor. color, SONY CCD;
  • Viewing angle. 170 degrees;
  • Light sensitivity. 0.1 lux;
  • Resolution. 728×582 / 728×512;
  • Parking markings.
  • Color sensor. SONY CCD;
  • Viewing angle. 170 degrees.;
  • Light sensitivity. 0.01 lux;
  • Resolution 728582/728512;
  • Moisture protection. IP66;
  • 520 TV lines;
  • Parking lines;
  • PAL / NTSC.
  • Sensor. color, SONY CCD;
  • Viewing angle. 170 degrees;
  • Light sensitivity. 0.1 lux;
  • Resolution. 728 582/728 512;
  • Parking markings.
  • Plastic case;
  • Sensor. color, SONY CCD;
  • Viewing angle. 170 degrees;
  • Light sensitivity. 0.1 lux;
  • Resolution. 728 582/728 512;
  • The degree of moisture protection. IP68;
  • The number of TV lines. 520;
  • Disconnectable parking lines;
  • NTSC. switching;
  • Working temperature. 30 70;
  • Power cord length. 120 cm;
  • Video signal wire length. 600 cm.
  • Sensor. color, CMOS;
  • Viewing angle. 140 degrees;
  • Resolution. 728×582 / 728×512;
  • Parking markings.
  • Sensor. color, CMOS;
  • Viewing angle. 140 degrees;
  • Resolution. 728×582 / 728×512;
  • Parking markings.

An irreplaceable thing for novice drivers, as well as for experienced car enthusiasts. Rear View Camera. This tool allows you to see what is happening behind your car, which can be quite difficult for most drivers. There are different situations when what is happening on the road is quite difficult to see through the mirrors, but you do not want to become a victim or cause an accident. Therefore, the best way to protect yourself and your car is a rear view camera.

The rear view camera makes it possible to fully represent the situation, which means you will forget about the problems and will always feel confident behind the wheel of your car. Modern cameras have a viewing angle of up to 180 degrees. Therefore, if you decide on such a purchase, then you will definitely not regret it.

Good visibility and easy parking: rating of the best rear view cameras for a car for 2020

Review of the best according to the opinion of the editors of Zuzako.com. In the selection criteria. This material is subjective, not advertising and does not listen to a purchase guide. Before buying, you need to consult with a specialist.

Popular manufacturers of quality car rear view cameras

Search for rear view cameras should only be among well-known brands. In this case, you can count on high quality, clear images and long service life.

  • Xiaomi (China)
  • Autoexpert (China)
  • Vizant (Russia)
  • SHO-ME (Russia)
  • Pleervox (China)
  • Interpower (Russia)
  • AVEL (Russia)
  • Intro (Russia).

Review of the top good quality rear view cameras with photo models

Which of these would you prefer??

Overhead, mortise and screw models

In this category are presented mortise, screw and overhead cameras, which are very popular among car owners. Such devices have a relatively low price, but provide high-quality HD and Full HD picture.

Xiaomi 70 mai Midrive RC03

This overhead camera is considered the best in its category. It is distinguished by its versatility, thanks to which it can be mounted in any part of the car body. Xiaomi 70 mai Midrive RC03 is equipped with a waterproof case. It is made of high quality plastic, which is NOT afraid of heat and cold.

Among the characteristics of the model, vehicle owners note a 138 ° viewing angle, high resolution (1289 × 720 pixels) and a wide temperature range. The model is almost invisible on the car. It has a very compact size and weighs only 30 grams.

  • Versatility
  • Excellent set of characteristics
  • Compactness
  • Light weight

Autoexpert VC-216

The VC-216 is a compact camera that can be used at low and high temperatures. This model has a waterproof and dustproof housing, which protects internal parts from quick failure.

The relatively low cost did NOT affect the performance of the device. Among them, the user will definitely like the 170 ° viewing angle, the wide operating temperature range (from 20 to 60 ° C), the photosensitivity from 0.1 lux and the signal / noise ratio of 45 dB. An important advantage of the VC-216 is that it has two useful features. The first one displays lines that simplify the parking process, and the second one. mirror reflection.

  • Compact and lightweight
  • Good price
  • Waterproof and dustproof housing
  • Long service life

Vizant RMCM-07 BOX

This inexpensive model from Vizant supports the popular PAL and NTSC television signal standards. This makes it compatible with most display devices. RMCM-07 BOX uses a wired connection type. It requires more complex editing, but allows you to get a stable signal and high definition of the picture.

The camera can operate at minus and plus temperatures. Because of this, it is often consumed in regions with cold or hot climates. Among other features, the minimum photosensitivity (0.2 lux) is distinguished. This makes it possible to use the technique Not only during the day, but also at night. The resolution is 720 × 540 pixels.

  • PAL and NTSC support
  • Signal stability
  • Use at night
  • Long period of work
  • Relatively small viewing angle

Framed models and license plate light

This category includes the most compact cameras built into a license plate or frame. Most of the models have an original design and an optimal set of characteristics, as well as provide excellent picture quality.

SHO-ME CA-6184LED

The best license plate fixing technique is CA-6184LED from the world famous SHO-ME brand. This model supports PAL and NTSC standards, therefore it is very popular among vehicle owners. She uses a wired type of connection, which during installation leads to certain difficulties.

The characteristics of this budget device are NOT inferior to those of more expensive models. Among them, a wide range of operating temperatures (from 20 to 60 ° C), a matrix resolution of 728 × 628 pixels, a maximum operating voltage of 12 V and a signal-to-noise ratio of 48 dB are distinguished. A pleasant addition for the buyer will be a high level of moisture protection of the case. Thanks to this, CA-6184LED can be actively used during rain or heavy snowfall.

  • Low cost
  • Excellent set of characteristics
  • Waterproof housing
  • Compact and lightweight

Pleervox PLV-CAM-HYN02

PLV-CAM-HYN02 is an expensive but high quality and multifunctional camera. It is mounted on the room backlight and uses a wired connection type. This model is equipped with a durable body that can withstand accidental impacts of small objects bouncing off the wheels of the car. This structural element is also reliably protected from moisture and dust.

The device works equally well in hot and cold weather. It has a very wide viewing angle (170 °) allowing it to cover a lot of space behind the machine. Other characteristics include a minimum photosensitivity of 0.1 lux, a matrix resolution of 768 × 494 pixels and a minimum operating voltage of 9 V. Customers will also like many additional functions. These include mirroring, parking lines and reverse gear activation.

  • Good build quality
  • Compactness
  • Shockproof housing

Interpower IP-616

IP-616. it is a camera mounted on a license plate. It produces a high-quality picture and allows you to shoot at a speed of up to 60 frames / s. The device is equipped with a durable waterproof case, which is NOT afraid of severe frosts and 70-degree heat.

The model has a standard set of characteristics. Its only significant drawback is its relatively small viewing angle. This disadvantage is partially covered by the many advanced features of the camera. With certain settings, it can automatically change the white balance, exposure and vertical tilt. Also, the device can create parking lines on the screen and mirror the rear view image.

  • Excellent picture quality
  • Parameter adjustment system
  • Waterproof
  • Shooting speed up to 60 fps

Models in recorder, brake light and trunk handle

This category contains cameras that can be fixed in the video recorder, as well as on the brake light and trunk handle. Such devices are very simple and easy to use. In addition, they are compact and invisible on the car.

AVEL AVS327CPR / 190

This pop-up camera is expensive but has good quality and long service life. It is made in the form of a trunk handle and is mounted in place of the standard handle. This model is equipped with an HD-sensor, which simplifies the parking process and allows you to monitor what is happening behind the car.

The device has a viewing angle of 170 °, minimum photosensitivity value of 0.01 lux, and also operates at extremely low and high ambient temperatures. The optimal camera resolution allows you to get the clearest picture possible. This significantly reduces the likelihood of emergencies.

  • Excellent set of characteristics
  • HD sensor
  • Clear image
  • Ease of installation

Pleervox PLV-CAM-LR

PLV-CAM-LR. This is a camera mounted in place of the standard trunk handle. It has a relatively low cost, but has a good set of characteristics. It has a wide viewing angle to control the situation behind the vehicle, and has a minimum light sensitivity of 0.1 lux. Thanks to this, the camera can be used when traveling at night. A nice addition will be the presence of several useful functions (parking lines, mirroring, activating reverse gear, etc.).

The device is equipped with a durable case, which allows you to use the equipment in any, even the most extreme weather conditions.

  • Good price
  • High-quality picture
  • Use at night
  • Many additional features
  • High maximum operating voltage

Intro Incar VDC-412

This brake light camera is of good quality and comparatively low cost. It has a wide view and high resolution, which makes it possible to monitor the situation behind the car. Incar VDC-412 works in all weather conditions. It is reliably protected from moisture, dust and the negative effects of subzero temperatures. Among other features of the model, it is worth noting ease of connection, long service life and the presence of many useful functions.

  • Excellent build quality
  • Clear picture
  • Dust and moisture resistant
  • High minimum light sensitivity

Recommendations of the Zuzako editors for the choice of rear vision devices for a car

  • You should buy cameras only if the car interior is equipped with at least one image display device (for example, a navigator).
  • There are wired and wireless models. The former provide a stable and high-quality signal, while the latter allow you to get rid of excess cable in the cabin.
  • We recommend that you buy equipment with the widest possible viewing angle. This will allow you to cover more space and get a complete picture of the car situation. Values ​​of this parameter are acceptable in the range from 120 to 170 °.
  • For the resulting picture to be of the highest quality, you need a matrix resolution of more than 0.3 megapixels. Otherwise, the image will be blurry and it will be difficult to see small details on it.
  • An important advantage of the device will be the presence of a wide range of changes in light sensitivity. Thanks to him, it will be possible to configure the equipment to work at dusk or at night.
  • The selected model should have a waterproof and low temperature resistant case. Otherwise, the camera cannot be used in cold weather and high humidity. Protection against dust and dirt will be an additional advantage.
  • An important selection criterion is whether the camera supports PAL or NTSC standards. Otherwise, you will have to look for a technique that is compatible with existing image display devices.
  • It will not be superfluous to have several additional functions. The most requested among them are parking graphics, mirroring and automatic white balance.

A compact camera is a good alternative to the side mirror. Such a device always provides excellent picture quality, helping to avoid accidents and park correctly at night or during the day. When making a choice of such a technique, do not forget to look at our article. It briefly describes the best models of different types with an optimal set of characteristics. Like, comment and social media.

Share with your friends on social networks

Reference article based on the expert opinion of the author.

BYRGPUB.COM 2023