What is in the factory version of the car

Radio B Passat 6 can be simple or with a large display. A camera with the following properties is installed in the factory version:

• The device has a viewing angle of at least 170 °.
• The quality of the displayed image is high. Therefore, all objects are clearly visible on the display.
• Built-in IR illumination that enhances image quality at night.
• The device is capable of applying virtual markup to the image. It was created in such a way that B 6 and another city could easily be parked in a parking space.

Which camera to choose

• The viewing angle is the defining parameter when choosing a device. Most models have 170 ° viewing angle.
• The operating temperature range is in the range of 40 °… 50 ° C. This makes the device more resistant to weather conditions.
• The body is manufactured to various standards. In most cases, it provides IP66 protection against moisture and dust.
• In most cases, the device is powered from a 12V network.
• The physical resolution of the matrix determines how clear all objects in the output image will be.

When choosing, it is recommended to pay attention to the configuration of the device. It often includes an AV cable, DC cable, and some other items. The model that provides for the placement of a special badge is very popular. It opens and the camera moves forward a little.

Installation and connection

A scheme that provides for the installation of a camera under the vehicle logo is becoming more and more popular. In the standard version, a motor is located in this place, which is responsible for the rotation of the rear wiper. You can find a suitable seat from the Passat CC version. Installation of the camera is carried out according to the instructions below:

• A suitable ring is installed in its place. For fastening, you can use liquid welding with a sealant. The surface of the boot lid is painted if necessary.
• After installing the seat, the camera is placed. A set of wires is required for connection.
• The complexity of the connection lies in pulling the cable through the tube that connects the trunk lid to the body.
• The problem with cable routing arises due to the fact that you have to remove all the trim. It is fastened with bolts and clips.
• In the car in question, the gasket is carried out on the right side. There is little space due to the washer tube, so the wire is pushed first, then the wiring is attached.
• At the time of disassembling the interior, you need to be careful, as metal clips can be damaged.
• When laying the wire, you will have to remove the glove compartment and RNS. A wire is passed through this place, which is additionally fixed with clamps.
• After connecting the wire and placing the camera, the sills and trunk are assembled. During installation, you need to be careful, as strong mechanical stress will damage the fasteners.

VW Passat Variant B6 3C 4 motion WiFi Rear Camera Android good working license plate

A similar system is found on expensive cars, since the camera has reliable protection against environmental influences. The selected system can apply a virtual adaptive markup, which greatly simplifies delivery.

Installing a rear view camera on a Volkswagen Passat B6

On many modern cars, a rear view camera is installed to make it easier to reverse. However, this option is not always included in the package, and you have to install the device yourself. Rear-view camera Passat B6 may differ significantly, so the choice of the device must be taken responsibly.

Malfunctions and their elimination

Disassembly is often carried out due to a malfunction. The most common are the following:

REMOVE TAILGATE VW PASSAT B6. تغير باب خلفي فولكس واجن باسات DEPOSER HAYON VW. REAR DOOR VW B6

• Malfunction of the camera itself. Chinese versions can crumble almost in the hands. This is due to the poor build quality. Therefore, the device may break even with strong vibration.
• Lack of contact. The connection of individual elements can be carried out using various methods. If quality plugs have not been used, then there is a possibility of corrosion. You can remove it mechanically or using special means.
• Damaged wiring. Even a standard system can fail due to an error in cable laying. You can find the damaged area using a multimeter. It is not recommended to restore the damaged area; it is best to lay a new cable.

It is almost impossible to troubleshoot camera problems. Therefore, a new device is being installed.