Phone As Ip Camera Remotely • BYRGPUB.COM

Video surveillance over the Internet: 4 ways to configure remote access to IP cameras

Remote video surveillance is becoming more popular every day, and with the advent of dedicated cloud services, its availability is growing. Thanks to remote access, you can view from almost anywhere in the world what is happening in front of CCTV cameras online. All that will be needed for this is Internet access.

Today, the implementation of this kind of video surveillance is available both for large organizations and for private use. To install and configure video surveillance via the Internet in the second case, you do not have to resort to the services of specialists. you can easily do it yourself.

Remote video surveillance can be useful in various life situations, for example, for organizing surveillance at a summer cottage, for monitoring the actions of a nanny caring for a child, for the progress of repairs or construction of a house by workers. there can be a lot of situations.

Necessary components of a remote video surveillance system

To implement Internet video surveillance, the following functional elements are required (depending on the volume of the system and the user’s desires):

Cameras. IP, or regular web;
Digital video recorder;
HDD;
Router (router)
Software;
The required amount of network UTP cable;

Necessary components of a remote video surveillance system

But each individual case is different, and when creating a simple video surveillance system with one IP camera, it will be enough only for it and a dedicated IP address, if you do not need to record an archive on a hard disk, but only remotely control what is happening.

To create online video surveillance without using various cloud servers, you will need a dedicated static IP address. You can get it from your ISP, or use the special DynDNS service. By the way, the result of obtaining a static IP on your own through such services can be achieved for a long time and is difficult, and it is not a fact that you will achieve your goal. So the best option would be to get a static IP for an additional fee from the provider (about 200 rubles per month), or use a special cloud service.

In general, today it is possible to implement remote video surveillance without a static IP address and DDNS services. Not so long ago, there appeared the so-called Cloud video surveillance services, to which you can connect your cameras, and view the video stream in real time. Read more at the end of the article.

The main disadvantage of remote video surveillance in general is the fact that it is not always possible to connect to the cable Internet everywhere, and, as a rule, UAH connections through wireless networks leave much to be desired. Remote control of a large video surveillance system, consisting of a large number of cameras, in this case will be very problematic.

So, let’s look at 4 main options for implementing online video surveillance of the Internet, starting from a simple one, ending with a full-fledged system.

Organization of online video surveillance. main ways

We install cameras so that in the future it would be possible to easily identify the faces of all people who come under their review. To do this, it is necessary to determine the optimal installation height, as well as to select devices with the required focal length and viewing angle in advance. To ensure the best quality today, it is better to buy IP cameras with high image resolution.

After installing the cameras, we need to connect them to the DVR using a UTP cable. You also connect a hard drive to the recorder (preferably with external power supply), and power our entire system from the network. In order not to bother with extra wires, you need to immediately buy cameras with the ability to power over a network cable (PoE), as well as a DVR with PoE ports, or in the future use PoE adapters and a power supply for IP cameras (PoE injector).

Next, connect our entire system to the router, and make all the necessary settings: port forwarding, setting camera parameters, etc. Later, we will also analyze the setup of a remote video surveillance system with a video recorder and a router in more detail, and first, let’s talk about organizing remote access to one camera.

With one IP camera

Video surveillance using one IP camera

The simplest, and therefore popular, way of organizing remote monitoring is a direct connection of the IP camera via the provider’s network cable. To implement this method, we need the same dedicated IP address, which will need to be assigned to the camera itself.

First, you need to connect the camera to the computer, and enter its IP addresses in the browser line. You can find out IP cameras in the user manual, on the manufacturer’s label stuck on the body, or using the manufacturer’s software on the disk that comes with the kit.
After entering the IP, we will get into its web interface, where we will need to go to the network settings subsection, and indicate “Receive automatically” in the “IP addresses” line, or manually register the IP address allocated to you by the provider for greater reliability.
Now you need to find out the port used by the camera for the incoming connection. most often port 80 is open.
Next, set the login and password by which you will enter the camera’s network interface, disconnect the device from the computer, and connect the provider’s network cable to the IP camera.

If configured correctly, the camera image will be available from any device at: http: // (your permanent IP address) 🙁 open camera port). without brackets.

It happens that the provider blocks port 80. in this case, change it to another in the camera settings. As you can see, everything is simple, and all this can be easily done without the help of specialists.

Remote video surveillance using a router

Remote video surveillance with the introduction of a router

To connect two or more cameras to the Internet, we need to enter a router (router) into our system. He creates his own subnet, which includes all the cameras, and he also needs a dedicated IP address.

To configure the router, we need to get into its web interface. This is done by analogy with one IP camera. in the address bar of the browser, we drive in its standard IP addresses, set by the manufacturer by default, and gets into the login and password input form. IP addresses can be taken on the device label, or in the user manual, in the same place we take a login with a password (usually login: admin, and the password is a combination of several zeros).

After entering the network interface, you need to assign a port to each camera. as a rule, this can be done in the section “Routing”, (Port Forwarding, “Virtual server”, etc., depending on the router) in which rules are created for forwarding external requests from the Internet to one or another IP address of the internal networks. For example, to the external port number 8086. Set the redirection to internal port 80 to the IP address of the first camera (for example, 192.168.1.11). For the external port 8087, set the redirection to port 80 of the internal IP address of another camera, etc. Depending on the router model, the settings may differ, for example, it is possible that in your case you just need to register the ports of each camera with IP addresses and other information:

Service name. for example, “IP camera 1”;
Port range. manually assigned port of the first camera 8086 during further configuration;
Local IP address. 192.168.1.11 (camera IP addresses)
Local port. 8186, or 80 if the camera did not have the ability to configure the port;
Protocol: TCP;
Protocol number: 1 (or any other number).

To avoid further confusion, we advise you to write down each local IP addresses of cameras on a piece of paper, they will still be useful to you.

After configuring the router, go to the cameras. In turn, we connect to each of them directly from the computer, and manually assign them an IP address, which was registered in the router settings. for convenience, use the list of IP addresses written earlier on a piece of paper. The port remains the default. 80, or written manually.

It remains to configure the connection with the provider, and connect all the cameras to the router. To connect to CCTV cameras via the Internet, you need to register the request in the address bar of your browser: http: // (your permanent IP address): (external port specified in the forwarding settings). remove the brackets. When you click on the link, you should see a window with a login and password entry form. enter the data specified when setting up the camera. Again, it is better to write down the data of each camera in a separate list so as not to get confused in the future.

By analogy, we connect cameras with a Wi-Fi transmitter.

Video surveillance through Cloud services is becoming more popular and more accessible every day. In connection with this increased demand, supply is also growing. more and more manufacturers of video surveillance equipment are beginning to offer their consumers to use their own cloud services. Also, the number of new companies specializing in organizing a specialized cloud for viewing CCTV cameras is growing. Read in our article in the most popular and technologically advanced cameras that have the ability to connect to a remote cloud. Read completely

Add a video recorder

Remote video surveillance system with connection of a video recorder

Thanks to the introduction of the DVR into the system, its functionality is significantly expanded. Now it becomes possible not only to view the picture from cameras online, but also to keep an archive, which will also be available through remote access. In addition, various security sensors can be connected to the DVR, with the help of which the system can notify you of an alarm event.

The principle of setting up IP video surveillance via the Internet by adding a video recorder to the system is practically the same as the previous method.

We get a dedicated IP address from the provider, then set up forwarding from it to the IP addresses of the local network in which the DVR will be located.
Usually all the necessary network settings are found in the “Network” tab. In this section, you do not need to register the local IP address of your DVR (for example, 192.168.1.1), the gateway (the IP address of the router in the local network), as well as the subnet mask (usually it looks like 255.255.255.0).

Important! It is necessary to follow the same rule, which says that the router and the DVR must be on the same subnet, otherwise they simply cannot see each other.

Now it’s the turn to configure the router parameters:

We go into its web interface, select the item “Remote Management”, and allow remote control of the device with the allocation of the corresponding port.
Now in the “Virtual Servers” section we set up forwarding by analogy with setting up a system only with a router: for example, external port 8086, DVR port (80), and its IP addresses to which requests from the outside will be forwarded (as an example, we indicated 192.168.1.1).
It is also worth fixing the permanent IP address of your DVR by its MAC address, otherwise the router may assign arbitrary IPs to it after rebooting. Usually these settings are located in the “Address Reservation”.

With the correct settings, the DVR will be available upon request: http: // (your permanent static IP address from your ISP) 🙁 8086). must be specified without brackets.

Important! Let’s clarify one important point, when a lot of users stumble upon who have successfully configured the equipment, but still are NOT able to connect via remote access. It is impossible to enter the DVR settings remotely from the same static IP address, which you assigned to it (and which one has your Internet), since the request from a technical point of view is generated from the same address. Therefore, to check the functionality, it is necessary to log into the recorder from a device with a different IP address. mobile phone or computer with excellent external IP.

Video surveillance through cloud services

The main advantage of organizing video surveillance over the Internet with the introduction of cloud services is that there is no need for a dedicated external IP address. The main requirement in this case will be that your DVR supports P2P technology (you need to specify when purchasing).

The principle of remote access to the video surveillance system in this case consists in the constant connection of the video recorder or camera with the cloud service and transferring data to it, while at any time you can connect to the system and watch what is happening online, or work with the archive. To do this, you just need to go to the service website from any device (or use a special application from the equipment manufacturer) and enter the registrar’s identification number and password in the service authorization form. When registering separately in the cloud service, enter the data specified during registration. This method greatly simplifies the task for people who are not versed, or who do not want to spend their time on setting up a router, obtaining an external permanent IP address, etc.

To configure the DVR, in most cases, you just need to go to its interface, and put a tick in front of the line “P2P” or “Cloud”, and that’s it. the equipment is automatically connected to the native cloud service. And to start watching what is happening from the cameras remotely, we go from any device, and just enter our data into the service authorization form.

The main disadvantage of video surveillance through the cloud is the limitation of the connection speed, therefore there will be restrictions on the bitrate of the video stream, which will NOT have a positive effect on the image quality. Users of 3G modems will not even notice this, because the connection speed is already quite low, and is strictly limited by the parameters of the 3G standard.

We also invite you to familiarize yourself with our rating of cloud video surveillance services:

How to connect to an IP camera remotely?

Thanks to technological development, today a wide horizon of new opportunities opens up in the field of security and video surveillance. First of all, among the useful functions, one can single out the ability to track a captured picture remotely via the Internet. Having mounted a new system or simply modifying an already installed one, you can establish remote access online from anywhere in the world.

Thus, being in an apartment or a country house, you can see what is happening in the office, using only a convenient device for yourself. by phone, laptop or tablet. No cables or wires are required to connect to a video surveillance system.

However, in order for remote connection to become a reality, you need to know how to set up a video surveillance system and what services to use for this.

Remote view of IP camera via internet

The tracking system, which will have a remote viewing function, should consist of several components, such as:

Videcam;
Video recorder;
Router;
Software.

Make sure there is a LAN port on the DVR. If it is absent, you can use the USB-connector, but in this case you will need a USB-modem. In a situation where a video surveillance system is mounted on a computer or specially on a server, ports may NOT be required, since the software will already support the remote viewing option. However, this needs to be clarified for each software.

Next, you need to organize access to the network, and at a speed sufficient for full operation. Experts recommend starting with a minimum value of one megabit per second. If possible, you should negotiate with the provider to obtain a permanent IP address. This will help to further simplify system configuration and improve reliability.

When a subscriber has a dynamic IP address, a lot of problems arise when configuring the system and managing its elements. To make sure whether the addresses are constant or dynamic, you need to go to the browser and ask the corresponding question in the search, and then go to the appropriate service based on the results. The appeared IP addresses need to be written down, the router reconnected, and then the procedure must be repeated. If the address remains the same, then it is permanent.

When the system uses USB modems, the address will always be dynamic. Therefore, you need to check with your provider about the possibility of providing a fixed IP address as an additional option.

The next element of the system. this is a router. It must be configured so that when a specific request with a list of parameters is made, it can connect the remote access device and the recorder.

In addition, the corresponding software must be installed on the remote access device. If there is NO disk left from the recorder, you can search the software on the network.

Setting up remote access

The first step is to take care of the correct configuration of the router, since in most situations the registrar connects to the Internet using it. To implement such a connection, you need to redirect the ports from the router itself to your DVR. When viewing the address via the Internet, the system sees only the external IP address of the router itself. For this reason, it is necessary to organize the configuration in such a way that the request goes first to the router, and then. to the desired local address and the Corresponding HTTP port.

The port forwarding procedure may differ in its required steps depending on the router model, the most common of which are:

In general, the algorithm for configuring all THESE devices is similar in that initially you will need to find out the address of the registrar, and then indicate it in the local network, additionally specified the port number, the most common of which. 34599. You can configure this data with your own hands, or you can go to the DVR settings and find them there.

After the application is downloaded and launched, the main window will appear.
To proceed to setting up the program, you will need to click on the button with the gear icon.
After that, you can see a list of connected devices on the screen. If this setting is the first, then no devices will be visible in the list.
You will need to click on the “Add” button to start adding your DVR to the mobile application. There will be six main fields that you need to fill out:
Device name. you can name it as it will be convenient, or you can use an arbitrary set of characters;
Address. enter the IP address of your Internet connection here;
Port. to indicate THESE data, you will need to go to the recorder settings or use the numbers 34599;
Username. specify the name that will be used for the subsequent login. You can write admin;
Password. if the username is admin, then the password can be the same or absent at all;
Maximum number of channels. here specify how many cameras can be connected.
Once all the data has been entered, you can press the “OK” button and return to the main menu.
Clicked on the name of the desired device, you can see the image broadcast from the IP camera, if everything is done correctly.

When there are several CCTV cameras in the system, you can add them according to the plan above, and then switch through the device selection menu. Some applications allow you to take photos from camcorders, for which there are icons in the interface with a picture on which the camera is depicted.

Phone access

There is a large number of software and mobile applications that allow remote access to an IP camera.

Vmeye. This application is compatible with tablets and smartphones that run on the Android operating system, and the system version must be higher than 1.5. You can connect online, take screenshots, focus the picture and manage a large number of streams.
Vmeyepro and vMEyePro. Improved apps that are compatible with both Android and iOS. It features a large set of useful functions, support for seven languages, including English or Russian. Family sharing option available.
Vmeyesuper. This software version is also available for both OS. it is available both in Google Play and in the AppStore. The undoubted advantage is the support of the Russian language, as well as the ability to fully customize remote access. You can watch the necessary data in real time, adjust the zoom, broadcast audio information, and also work in multiple streams.

Hidden remote access to Android phone from phone

Do you want to secretly track what is being done on another phone from your phone? Need to install hidden remote access to your phone? Here you can download free Android tracking software.

What is Remote Phone Access?

Remote access to Android phone. this is a very useful feature that the Reptilicus logger application provides. best tracking software for Android and Windows devices of 2019.

In addition to hidden (invisible) remote access to an Android phone from a phone, we provide the following types:

Hidden remote access to your Android phone allows you to:

Remotely access phone microphone to record surroundings (voice recorder)
Monitor internal phone folders;
Block the phone;
Turn on alarm;
Block the Internet remotely for a certain period;
Block websites remotely;
To see the location of the phone on the map around the clock;
Remotely listen to recordings of phone calls;
Remotely receive all notifications that come to the phone’s shutter;
See all keystrokes;
Get remote access to the camera of the second phone (take photos);
And much more.

The function that allows you to remotely block the Internet for a certain period is especially in demand if you set up remote access to a mobile phone for the purpose of Parental control by the phones of children or corporate control by the phones of employees.

The command that allows you to remotely access the phone’s microphone can record the environment from 1 minute to 12 hours in a row. It is possible to set the recording of the environment for specific periods. For example, keep a record every day except Sunday from 15:00 to 17:00. At this time, your child, for example, is out of an extended class and you want to monitor what they are actually doing there. Whether they are given the knowledge that was declared by the leaders of the circle or sports section.

How Android Phone Remote Access Works?

The program of remote access to the phone on Android Reptilicus works as follows: you download the installation file. transfers in any way to the phone (you can download it directly to the phone itself). Install. tie the phone to your office. I hide the program. give me the phone.

Our Android phone remote access program will start collecting data and transferring it to your account. And from this account you can already: view data and send it remotely, unnoticed by the owner of the team’s phone.

Remote access to the phone only via the Internet works?

No. Remote access to the phone via the Internet will transmit all your commands, work them out and send the information received to the office. But. If there is no Internet, then remote access to the Android phone can be carried out via SMS commands.

Attention! We would like to warn you that remote access to the phone from another phone via SMS commands (not via the Internet) will not be hidden and unnoticeable. SMS commands come to the phone like regular SMS messages and they are visible to the owner of the phone. Although he will NOT understand the numbers and code words, he will see where the SMS message came from and this may give him an idea. find the original source. Therefore, it is wiser to carry out invisible remote access to the phone only via the Internet.

Where Can I Download Android Phone Remote Access?

You can download remote access to an Android phone for free on the main page of the site. The installation file is provided free of charge and without registration.

The screenshot shows where you can download remote access to Android phone without the owner’s permission. By the way, free remote access to an Android phone via another phone will work for the first 3 days. Then the work of the office will need to be paid.

How to properly set up remote access to the phone through your phone?

The “Guide” page contains the Step-by-Step Guide, which is written in accessible language. And the screenshots show what needs to be installed and why. Please DO NOT be lazy and read this guide. it will take at most 30 minutes. But on the other hand, you will correctly configure our application for remote access to the phone.

How to get remote access to someone else’s phone through your phone?

Consider two options:

Option 1. Remote access to someone else’s phone through your iPhone

Remote access to an Android smartphone from an ios phone (iPhone) is only possible through a web page. You will have to go to the page of our site, enter your username and password and open an account.

Option 2. Remote access to someone else’s phone through your Android phone

In order to get remote access to someone else’s phone through your Android phone, you must install the “Client” on your phone. Client. mobile version of your personal account. It can only be installed on an Android phone.

From your phone, you will not be able to type a login and password every time, as well as bypassing the entry to the site, immediately get into the account and there already View the data received from the application. Also from the Client you will be able to (by means of commands) access someone else’s phone remotely.

Best Android phone remote access 2019. Reptilicus logger app!

Smartphone as a camera. not the best solution in terms of quality, however, it is equipped with wireless interfaces and is more convenient to operate remotely. Many interesting tasks can be solved with the help of special mobile applications, such as photography by motion detection, remote photography and video surveillance.

Motion detection photography

Simple application “Motion Detection” (search in Google Play) allows you to equip the camera on your smartphone with a software motion sensor. This means that the device will continuously observe what is happening in its field of view, and will take several pictures only when movement appears in the frame.

This function is convenient Not only for those who want to protect their precious sandwich from the encroachments in the office or student kitchen (as described in the instructions for various programs of this kind), but also for those who, for example, take pictures of animals. In particular, you can install your smartphone near the feeder and automatically take pictures of squirrels or birds in the park.

Remote photography by smartphone

The camera on the smartphone can also be controlled remotely. In this case, you can use another phone in the same platform as a remote control, which is useful for spectacular selfie or for inconspicuous shooting of nature objects.

To do this, two similar applications are installed on both gadgets, then the settings indicate which one is a “camera” and which one. “remote controller”. The connection between them is configured via Bluetooth or Wi-Fi, for example, as in the Remote Shot program. Live Preview (available on Google Play), where a remote viewfinder is also available, working in real time, or via the Internet, as in the Remote Shoot application, and not requiring a direct connection of devices, but content with sending a link to a remote device.

Video surveillance via smartphone

Almost all modern smartphones allow not only taking photos, but also shooting videos using the built-in camera. Accordingly, it will be possible to add interesting functionality to a kind of ” camcorder”.

For example, you can convert an old smartphone that you no longer use into a video surveillance tool using an application with a poorly translated name “Video Surveillance Spy IP Camera” (available on Google Play).

As in the case of remote shooting, the program must be installed on two devices, and then indicate which device is a “camera” and which one. control panel. The only limitation is that both smartphones must be logged in with the same Google account. Several cameras and monitoring consoles can exist within one account at the same time.

You can watch the recordings from anywhere in the world via the Internet. The application allows you to tether shooting to the motion sensor (the appearance of motion in the frame). The video from the camera will be launched in no more than three seconds (p2p technologies are used). Video quality is regulated depending on the width of the Internet channel.

Hidden remote access to Android phone from phone

Do you want to secretly track what is being done on another phone from your phone? Need to install hidden remote access to your phone? Here you can download free Android tracking software.

What is Remote Phone Access?

Remote access to Android phone. this is a very useful feature that the Reptilicus logger application provides. best tracking software for Android and Windows devices of 2019.

In addition to hidden (invisible) remote access to an Android phone from a phone, we provide the following types:

Hidden remote access to your Android phone allows you to:

Remotely access phone microphone to record surroundings (voice recorder)
Monitor internal phone folders;
Block the phone;
Turn on alarm;
Block the Internet remotely for a certain period;
Block websites remotely;
To see the location of the phone on the map around the clock;
Remotely listen to recordings of phone calls;
Remotely receive all notifications that come to the phone’s shutter;
See all keystrokes;
Get remote access to the camera of the second phone (take photos);
And much more.

The function that allows you to remotely block the Internet for a certain period is especially in demand if you set up remote access to a mobile phone for the purpose of Parental control by the phones of children or corporate control by the phones of employees.

How Android Phone Remote Access Works?

Our Android phone remote access program will start collecting data and transferring it to your account. And from this account you can already: view data and send it remotely, unnoticed by the owner of the team’s phone.

Remote access to the phone only via the Internet works?

Where Can I Download Android Phone Remote Access?

You can download remote access to an Android phone for free on the main page of the site. The installation file is provided free of charge and without registration.

How to properly set up remote access to the phone through your phone?

How to get remote access to someone else’s phone through your phone?

Consider two options:

Option 1. Remote access to someone else’s phone through your iPhone

Option 2. Remote access to someone else’s phone through your Android phone

In order to get remote access to someone else’s phone through your Android phone, you must install the “Client” on your phone. Client. mobile version of your personal account. It can only be installed on an Android phone.

Best Android phone remote access 2019. Reptilicus logger app!

Sources:

http://www.Ip-nablyudenie.ru/kak-podklyuchitsya-k-ip-kamere-udalenno
http://grandisauto.ru/kak-udalenno-vkljuchit-kameru-na-telefone/