Installation of Windows with a USB flash drive using MSI WIND

The easiest way to do this is using USB Reanimator. USB Reanimator. This is an unofficial assembly of utilities from a certain Nerevar_se, which allows you to make your flash drive multi.carrier. Download options for version 1.5:

  • Windows XP SP2 RUS Corporate by OGOMOR. not a MSDN-image, but modified by the “craftsmen”, be careful!
  • WindowSpe mini USB Edition 02.08. contains a large set of programs, a graphic shell, network support, etc. D.;
  • Acronis Disk Director Suite 10.0 (2.161). sections manager;
  • Acronis Trueimage Home 11.0 (8.059). backup of information (see. Paranoid backup);
  • Samboot Bootable Disk 1.2. Loading disk, Russian, support for NTFS, Volkov Commander and T. D.;

Also in the kit are utilities for special formatting flash drives and loading image files in the archive.

Creating a bootable flash drive using USB Reanimator

P.S. During the installation of Windows, do not remove the flash drive until the installation is completed. Some antiviruses can take programs and scripts to restore forgotten passwords included in this assembly for viruses; You should not worry, there are no viruses in the assembly.

P.P.S. This instruction is chewed as much as possible, I hope you succeed.

Proverka. 13 October 2008, 13:43

Great, thank you! Damn an ​​aphigenic article to the author of respect.

Kostik. 16 October 2008, 15:19

I thought for a long time what kind of strange word is “synsalized” 🙂 And so everything is just fine!

Sign as Author. 21 October 2008, 12:48

Scha! Not everything is so simple)))) I’ll touch and look))))

ROMAZZZ. 25 October 2008, 11:42

Author. 01 Novmber 2008, 11:07

Rather, this is your antivirus clinging to cracks and kaygen, of which in this amateur assembly, there is 🙂

_. 09 november 2008, 04:51

DUST. 09 NOVEMBER 2008, 14:47

pancake. Everything is done and AHCI firewood is set. And I have a blue screen and writes that Begining Dump OF Personalized Memory and physized the dumps compls. I looked. The pumping file is on the disk C, the size of 756 Megov (Fint is divided into 15 and the rest). And I have a blue screen, then 15 minutes then three hours.

APS. 15 NOVEMBER 2008, 20:57

When trying to boot from a flash drive. just a black screen, reacts only to CtrLaltDel, a download COP-Floppy is installed, in the properties of IDE for a flash drive, Floppy was forcibly put. When creating a loading flash drive Windows98SE, everything is fine. What’s wrong?

Teapot. 22 november 2008, 10:39

After copying files (6th step), when starting the first point, a black screen appears, which says: “You can’t run Windows due to hardware disk setting errors. It is not possible to read from the selected boot disk. Check the specified path and serviceability of disk equipment. To obtain additional information about the requirements for equipment setting up a hard drive, read the Windows documentation and the documentation on the existing equipment.”

Taurus. 25 November 2008, 13:52

“I thought for a long time what kind of strange word is“ synsalized ”. “”

By the way, according to the rule of the Russian language, you need to write “” (for example., “play”, “find” and t.P.).

No, this rule applies only to the original Russian roots; All borrowings from other languages ​​are written with the prefix “C” as they hear.

Proverka. 26 Novmber 2008, 17:31

APS USB-Floppy what is related to USB Mass Storage? You just chose a flop with the USB integration, and this will not apply to the flash drive.

FFF. 29 Novmber 2008, 14:00

I do everything according to the instructions, but when moving to a point ? When you need to select the first item when the subsequent loading from the flash drive: C:/Windows/, it allows you to run Windows due to a spoiled or missing file: System32hal.DLL

RusBear. 02 December 2008, 13:00

Absent Hal.DLL got out when trying to load from the screw after paragraph 7. I had to boot back from the flash drive and choose paragraph 7. After that, everything is ok.

Guys, what does that weighs so much. For example, I do not need the image of Windows in the bags Progue. Throw who is not difficult for me without the image of Windows on Otherwise to drag it all for a very long time with my Internet. Thanks in advance.

Ser25. 11 December 2008, 04:22

Thank you so much for the detailed info of the installation)))

Miha. 21 December 2008, 12:26

And I had such features: the originally informed Linux was.HP loaded perfectly, then this Hal file got out.DLL, t.e. The system is not loaded after installing. Then he loaded from the flash drive and pressed on the last point (7). In general, everything went out for a long time, and the power light glows. Pulled out the battery and inserted back.So repeated several times. Again loaded from the flash drive and pressed to the first item. Then the usual text with options for loading appeared on the screen- I chose a “safe mode”. And only then the XP loaded and then with a black screen and shortcuts on it.Tried to install drivers with another flash drive- it did not work out.Then he was cunning (or turned off, I don’t remember.e. the computer turned off, but he didn’t drink!) and after that only the system loaded in its final (by the way, very good) option. Thank you very much to the authors.

23blacktop. 09 January 2009, 10:30

In safe mode, there is a black screen with shortcuts

Chabano. 26 January 2009, 08:20

Sanchos. 30 January 2009, 09:16

It is not clear how you put it, but on new matches. boards, USB is determined by the C/ A disk of sections in the acronis D and E, where you put it incomprehensible))))

Guest Romsol. 04 February 2009, 05:29

Break the Samboot Bootable Disk 1 disk.2 and it contains disk break, formatting, and everything works. Acronis really hangs. (version of USBREANIMATOR V1/0) everything else is put (today I put everything could not be checked)

Installation of loading from a flash drive in the BIOS

How to go to BIOS

  • How to go to BIOS? On different computers in different ways. After pressing the Start button, the hint flows at the bottom of the screen. which button to hold the pressed during the launch, so that you can go to BIOS. It can be F2, F12, DEL or another button of the upper rows of the keyboard. As you can see in the photo in the bios there are many tabs. Important rule: nothing can be changed and thoughtlessly clat everything in a row.

How to change in bios loading from a flash drive

2.Choose only the boot tab. This is the procedure for loading devices after pressing the start button. So, we approach the main thing, how to make a bios msi load from a flash drive. To start a boot flash drive, make a similar boot order on your computer.

  • one. CDROM primarily loading from a compact disk.
  • 2. USB FDD in the second load from flash drives.
  • 3. USB HDD in the third load from a hard drive connected to USB.
  • four. HDD in the fourth download from a stiff drive of a computer.
  • 5. USB CDROM in fifth download from a compact disk connected to USB.

On the same Boot page, there should be an indication of which keyboard keys to change places in places of boot order. In this bios, these are F5 and F6 keys.

When you do not need to go to BIOS

This is a BIOS example when you do not need to go to BIOS and configure the download order. The flash drive should be inserted into USB. After holding the F12 key, a small window appears during the launch: “Boot Menu”. Arrows up (up) and down (down) on the keyboard selected the desired boot line. It can be seen in the photo that USB verbatium is chosen is a flash drive. And press Enter. The load starts from the flash drive.

Severe cases

There are difficult cases. Mainly with new laptops or netbooks. In new computers in Bios, there may be a ban on loading everything except the system hard drive, CDROM, and the operating system delivered by the manufacturer. Then loading flash drives may not be loaded at all. Or loaded, but the bootloader is not prescribed when installing a new operating system that you want. What can help? In this case, it remains to reflash the BIOS. The BIOS file is downloaded only from the computer manufacturer website by number on a computer. If you have never done this, I advise you not to do. If errors occur during the flashing process, then the computer will completely stop loading, and it will be impossible to reflash at home again! This requires special equipment. And fix it will arise oh-oh-oh-very expensive. It is better to do it at once in a service center with a good reputation. Then it will be cheap and angry!

Well, that’s it! I wish you success in this matter and forward to install the system that you like! For example, Debian 9.

We load the USB drive on a computer with UEFI BIOS

In computers with UEFI BIOS support, you can use Windows OS, both with support for the new BIOS and without it. For example, take a computer that does not have an optical drive and it is assembled on the basis of the MSI A58M-E33 motherboard with support for UEFI BIOS. Now we need to put a flash drive created earlier in this computer. There is a special boot menu for fast loading from a specific drive in motherboards under the control of UEFI BIOS. This menu allows you to choose a specific drive without loading the main bios menu. On different computers, Boot Menu can be called via F12 and F11 in our case on the motherboard MSI A58M-E33 Boot Menu is called through the F11 key.

From this menu you can see the item “UEFI: KingStondatatraveler 2.0pmam ”and“ Kingstondatatraveler 2.0pmam “. If we choose the first item, then the Windows 7 operating system will be installed with UEFI BIOS support, and if the second, then with the support of a regular bios. After choosing the first or second point, downloading installation files will begin.

Note that if we created a boot USB drive using a proprietary program from Microsoft Windows USB/DVD Download Tool, we would not be able to put an OS that supports UEFI BIOS, as it creates a bootable flash drive that does not have UEFI support.

We move on. Now let’s try to set up loading from USB devices from the BIOS of the MSI A58M-E33 motherboard BIOS. To do this, at the start of the computer, press the DEL key. This action will load the BIOS of the motherboard.

In the main BIOS window we’ll switch to the Settings tab, after which the settings menu will open. In this menu, we need to select the “Download” item. After its choice, download settings will open.

These settings show that the first loading device is a hard drive.

[TUTORIAL MSI]. Cómo instalar un Sistema Operativo

So that our flash drive is loaded at the start of the system, we will put up the item “UEFI USB Hard Disk” is the first to.

After these actions, it is necessary to save the BIOS configuration and restart the computer. Now, at the start of the system, the first will be loaded with UEFI BIOS support for USB. To choose a USB flash drive with an OS without UEFI BIOS support, you need to put the “USB Hard Disk” item to the very top of the list in the BIOS boot settings.

An example shows how easily Boot Menu is adjusted and the bootable configuration of the BIOS of the MSI A58M-E33 motherboard BIOS. The Bios setting on new motherboards from other manufacturers looks like a similar way.

We set up loading from the USB drive on the old computer C Phoenix BIOS

Phoenix BIOS created by Phoenix Technologies. This BIOS was quite popular on already outdated computers. Using Phoenix BIOS, you can also boot from the flash drive. For example, take the Samsung R60 laptop, which has Phoenix BIOS support. As well as on most computers, click the DEL button and go to the Phoenix BIOS settings.

For our task, we need to go to the Boot tab. On this tab, select the “Boot Device Priority” item, after which we will get into the download settings menu.

In these settings, we need to choose the first flash drive in the list, as shows below.

Having done these actions, our loading flash drive will be loaded first at the start of the system. In the same way, you can put and run the flash drive on most PC running Phoenix BIOS.

Loading menu

If you need to run PC with USB only once, it is not necessary to touch the BIOS settings. Use booting boot menu, which is present on most modern computers and laptops. The menu contains a list of download options, you just have to choose the right one. How to get on the menu:

  • After turning on the PC, press F11 or ESC (the exact key will be indicated on the first screen);
  • On a welcoming screen, click Shift and click in the lower right corner to the reboot icon;
  • In Windows 10 and 8 in the OS parameters, go to the “Update and Safety” unit, then in the “Restoration” section, choose “Special download options”. After a couple of seconds, on the screen will appear on the restart, click on “use USB device”, then specify a specific flash drive.

Before entering the boot menu, first insert the carrier into the USB connector. Do not forget that with this method, the settings parameters are not preserved, it will be possible to start a PC from the flash drive once. At the next restart, OS from the hard drive starts.


BIOS setting up to download a computer from a flash drive depends on the variety of the motherboard. The changed parameters are preserved forever. When you want to start the computer in a standard way, from the main disk from the OS, go again to the BIOS and return the values ​​back. To open BIOS, after turning on, press Del or F2.


On modern maternity warehouses from Gigabyte, PC downloads from a flash drive in BIOS are tuned as follows:

  • Come into the Bios Features subsection;
  • leaf to the subparagraph “Hard Drive BBS”;
  • On the contrary, “Boot Option #1” insert a USB drive, the hard drive should move to the option
  • Return to the Boot Option Pororities and choose a flash drive again as a priority loading device.

For a one-time launch from a USB carrier, use a quick option: go to SaveExit, in the Boot Override subparagraph, choose the right device. Such a setting will be valid only on one load.

You can set up loading from a flash drive on maternity from ASUS in several ways:

  • On the latest models, the required setting is located in the form of a vertical list on the right on the main screen. In older versions, the “Load Priority” field is placed horizontally in the lower part. To change the order, it is enough to click on the mouse cursor on the right device (in our case, on the USB flash drive) and drag it to the first place.
  • By pressing F8 you will get to the Boot Menu, where you need to move the USB device to the first list of the list.
  • Click F7 to get into the advanced “Advanced Mode” settings. In the Boot tab, change priority by putting forward the desired drive.
  • In the same section, instead of priority, you can switch to a change in loading or “Boot Override”. Then the reboot starts immediately after choosing a USB device.

How to make MSI on maternity boards from a flash drive:

  • On the original screen on top there is a graphic menu “Boot Priority”, in which it is enough to move the USB forward with the mouse.
  • You can also go to the Settings subsection, and for the Boot item, change Option 1 to a flash drive. Then save the parameters and restart the PC to turn on the load from the flash drive.


On older computers, the BIOS has only a text intese and does not support mouse control. To cross the menu, use arrows on the keyboard, to select. Enter. BIOS version with a blue background. Award. In it, act like this:

  • Go to “Advanced Features”;
  • In the “Hard Disk Boot Priority” subsection, move the USB line for 1st place, clicking on;
  • Go to the previous ESC subsection, go to the “FIRST BOOT DEVICE” item;
  • Change the value to “USB-HDD”;
  • click F10 for exit, click Y.

So you can put the loading from the flash drive on the laptop or not the newest computer. If you do not see the USB in the choice of options, the intense was not connected. Go to Integrated Peripherals and set the value of Enabled in front of the USB Controller item. The same value should be indicated for the version of the controller 2.0.

The ami option is gray back in the background. How to set up here launch from flash drive:

  • In the Boot tab, go to Hard Disk Drives;
  • Move the USB device for 1st place;
  • Return to the previous screen and check that in the “Device Priority” at the site “1st Device” there is a drive.

To return the launch from the hard drive, next time return back to 1 place in the list of your HDD.


For a variety of PHEONIXBIOS, action is similar to the previous:

  • In the “Peripherals” tab, look at the availability of USB controllers-next to “USB Controller” should be indicated by the corresponding value;
  • In the ADVANCED subsection as FIRST DEVICE, place USB-HDD or Removable Devices as.

Save the result and start a computer with new parameters.

Loading from a flash drive/disk using boot menu

Why configure and change the upload line in BIOS when you can boot from the flash drive by clicking one button?

We are talking about boot menu. the loading menu, translated into Russian. If you call this menu, then you can choose where to download a computer/laptop: from a hard disk, from a CD/DVD, from a flash drive, from an SD card, and t.D.

The Boot Menu call button is usually indicated on the first screen that you see after turning on. An example in the photo below:


Buttons for calling a boot menu for various laptop manufacturers (PC). You can also find out in this article.

By calling a boot menu, you will appear all the devices from which you can download. Example in the photo below: you can download from a hard drive, flash drives and CD/DVD drive.

Why is the computer not loaded from a flash drive/disk

Almost all BIOS versions have an option to turn off USB ports. Of course, if they are turned off, then you will not be able to boot from the USB carrier. Check whether they are included (or drop the settings into default). a little higher in the article, I cited how it is done.

2) the loading flash drive is incorrectly recorded

Often it can be recorded incorrectly due to incorrect settings of the program (in which you recorded it). or “broken” ISO-image with the system. I recommend that you familiarize yourself with this article

3) after rebooting the computer, the installation begins first

Quite often the following situation is. You inserted a flash drive, the computer loaded from it and the installation began, then it rebooted, and the installation began again. And so in a circle.

In this case, just remove the flash drive and restart the computer. It loads from the hard drive (where installation files from the flash drive have already been copied). and the installation will continue (and not start again).

Now there are several types of USB ports on modern PC/laptops: USB 3.0 (USB 3.1) and USB 2.0 (USB 3.0. It is marked in blue). “Old” Windows do not support USB 3.0, therefore, in cases of “invisibility” flash drives, I recommend trying to install OS from the USB 2 port.0.

In the BIOS, when setting up the downloads of loading, you usually need to choose a USB-HDD, but in some cases BIOS does not see a flash drive. In this case, try to change USB-HDD to USB-FDD.

6) Error “Reboot and Select Proper Boot Device Or Inta Boot Media in Selected Boot Device and Press a Key”

It occurs often if you have, for example, a disk (disk) to a computer on which there are no loading records. Just remove and turn off all the carriers, except from which the installation is supposed (for example, USB flash drives).


Reboot and Select Proper error solution. “. cm. Instructions

7) disconnect from the computer all additional. equipment

It is also recommended to turn off the second monitor, printers, scanners, etc.D. The fact is that when installing Windows. this can create additional problems.

For example, I had a case that Windows incorrectly determined the default monitor and “sent” the image to another monitor that was turned off (and I observed the “black” screen. ).

In the Boot section, you need to change the download mode from EFI (UEFI) to Legacy (if any). On this occasion, I gave a recommendation above. The fact is that not all Windows OS support a “new” chip (in addition, you need to correctly record a flash drive for this installation mode).

In BIOS in the Boot section, there is a Secure Boot option. Also turn it off, translate it into Disable/off (if any).

10) Turn on Launch CSM (if there is (usually Boot section))

In BIOS in the Boot section, change the Launch CSM mode to Enable/Included (if any).

How to install Windows 10 on Freedos

Installation of Windows 10 on Freedos, that is, on a new pure hard drive is as follows. Insert the installation flash drive into the USB port or installation disk into the discod. Using a special key such as F2 or DEL, enter the BIOS and set your installation media first number. To continue, press the F10 key.

Your computer or laptop will start from the installation media and will offer you to make small settings such as installing the tongue, layout and time format. Then you will be offered to install the system on your hard drive, and it is also necessary to accept the terms of the license.

On Freedos how to install Windows 10 from a flash drive

After that, a window will open in front of you in which all discs connected to your computer or laptop will be displayed. You need to choose your disk. Usually if you bought a computer or laptop with Freedos, then your disk will have an inscription unoccupied space on the disk. Select this disk and click on the item Create.

As a result, several sections may appear. You will need to choose the largest from the new sections, and then click on the format button. Formatting should be made in the NTFS file system. When the formatting is completed, you need to continue the Windows 10 installation on Freedos. Installation will be carried out in two stages with rebooting between these stages. When the reboot your computer or laptop will start again from the installation native speaker, as a result you will again have a window for installing a tongue, layout and time format. You will need to pull out the installation medium. Then press the button on the computer or laptop and release this button only when the computer or laptop turns off. After that, press the on button again and then the second installation stage will start. When the installation is over, you will need to install the drivers. To do this, first install all the drivers from the disks that went with a computer or laptop. Then download the Driverpack program to your system and run it. The program will analyze your system and invite you to install the missing drivers and the programs you need. After installing these drivers and programs, we can assume that the installation of Windows 10 on Freedos is completed.

What to do after installation?

If you did not enter the key during the installation process, then the first thing I advise you to activate Windows 10. You can find a lot of interesting and workers on the Internet.

Then I advise you to go to the device manager, and make sure that all the necessary drivers are installed. If not, there are unknown devices, or something does not work, then download and install the necessary drivers. Just do not download them from nowhere. You have a laptop of a certain manufacturer and a specific model (which is most likely indicated on the sticker from below). Go to the official website of the manufacturer, find the page of your model through the search on the site, and there should be a section with drivers loading and the necessary utilities. I can’t give more accurate instructions, it all depends on the specific manufacturer.

Then download and install the necessary programs. Antivirus. Favorite Internet browser. It may well be that you will like a new, standard Microsoft Edge browser. It is really good.

Perhaps these articles will come in handy:

I really hope that this instruction came in handy for you, and you easily installed Windows 10 on your laptop. over, now you know how to do it yourself, and you will no longer have to turn to “specialists” for help, and even pay them. Good luck! Do not forget to leave Комментарии и мнения владельцев!

file copying process, reloading PC, setting parameters

When all files are copied to your disk, unpacked, etc the installer will begin to reboot the computer. So that after rebooting, the PC does not start the installation, a flash drive, after rebooting, it is better to remove it from a USB port-then it will not be needed, Installation will go from your disk.

Files were copied on a hard drive

The next stage in the installation is the introduction of the product key. If there is. enter, if not, you can do this later. just click the “do later” button (see. the arrow on the screen below).

In the next step, Windows will offer to configure the input parameters using a voice, keyboard, the location of your PC, protection against malicious content of web pages, etc.D.

In my opinion, it is convenient to set up all this in the OS itself, going to the Windows control panel. Therefore, I recommend click the “Use standard parameters” button.

Next, you need to specify the name of your account. roughly speaking, the name that you will see when the computer is turned on.

I recommend setting the account login in Latin (the fact is that this will save you from various mistakes in programs and games that do not always work correctly with Russian symbols found in the paths to your documents).

Password at your discretion (if there are children in the house, I recommend putting it).

The last stage in the installation of Windows is to wait for the final configuration of the system. Usually, at this time, the OS removes the window: “It will not take much time” (in fact, it can sag like 5 minutes., so all 25!). This is especially true for old computers on which they decided to put a new OS.

By the way, many users at this moment mistakenly believe that the installation hung and reboot PC. this is not necessary to do this.

the installation is completed, but there are 2 more important actions left!

Actually, the instruction is completed on this. Then you can start your usual classes, and I will allow myself to give a couple more recommendations in the last step.

Windows 10 is installed! The first icons on the desktop appeared.

What is recommended immediately after installing Windows?

Here is such a provocative title ✌. The first, to advise, is to install and update the drivers for all your iron (you can from the backup, which I advised to make in one of the steps of this instruction), or you can use the programs from the article that is given below below.

To help!

Programs for auto-renewal of drivers-my selection

What to Do AFTER Building Your NEW Gaming PC! [Windows 11 Installation, Drivers & BIOS]

Many after installing Windows 10 do not update drivers. after all, it still works (this is earlier than 15 years ago, after installing Windows 2000/XP, the system did not have a video detector, and the image on the screen flickered like that. that the eyes were instantly tired. Therefore, everyone immediately put the drivers (without reminders)).

Now the OS “wiser” and put the drivers automatically for most equipment.

However, the driver’s driver’s driver. leave to be desired. Later, you often have to deal with problems in games, when setting up Wi-Fi, Bluetooth, in audio and video programs, and t.D.

Then I recommend installing a modern antivirus from some well-known manufacturer, and update its databases. He expressed his preferences for the current year in the next article.

The best antiviruses of this year.-

How to disable Secure Boot on a stationary computer

Click Enter and enter it, click Enter again and select OS OS (other operating system),

Now let’s get out of here and select CSM (Compativity Support Module),

In the opened additional options, select the parameters of the loading devices and set only Legacy Oprom or UEFI and Legacy Oprom.

How to disable Secure Boot option on HP laptop

We see our SECURE BOOT parameter, set it to the Disabled position (disconnected), and the “Compatibility mode with other operating systems” “Legacy Support” is transferred to the “Enabled” position,

We save the settings, click the F-10, select YES and Enter, we reboot, after rebooting, this is the warning window with “A change to the operating System Secure Boot Mode Is Peding”, “Anglistians” are offered to enter the code 8721 on the laptop keyboard (in your case, the code will certainly be different) and press Enter, after this change in the UEFI bios settings will be saved and the laptop will be rebooted.

Installation of Windows on a laptop MSI

Consider the process of configuring the BIOS-and laptop MSI VR610X if it is necessary to install the Windows 7 or Windows 8 operating system with USB device, that is, flash drives, or with disk.

A flash drive or disk must be installed in advance in a USB port or in CD/DVD drive, respectively.

Turn on the laptop. In the process of loading the system, click the “DEL” key. It is located on the right on the digital keyboard.

We get into the main menu BIOS. We go to the Boot tab. Choosing the second line of the vertical menu “Boot Device Priority”. See the image below.

Press the “Enter” button. We go to the next window.

Here we see a list of devices. The laptop will look for and load the operating system on the devices in this order.

If we are going to install the operating system from the flash drive, we must move the USB device to the first line of the list. If we install the operating system from the disk, then you need to move the CD/DVD drive to the first line.

In the image below the USB device and CD/DVD drive are marked by numbers 1 and 2, respectively.

In order to move the first line we need to the first line, we go to the line “1st Boot Device”. Then press the Enter button.

A new window will appear, as in the image from below. In this window, select the right device. Press the “Enter” button again.

We go out to the main menu BIOS. We go to the “Exit” tab. We check that the first line “Exit Save Changes” is active. Press the “Enter” button. In the next window, we check that the screen “OK” button is active. Press the “Enter” button. See the image below.

The computer will automatically begin to reboot. After rebooting, a window will appear, as in the image below. You can install Windows 7 or Windows 8.

There is another way to choose a device from which you can download (install) the operating system. This method is much faster than the previous.

Here also a flash drive or disk should be installed in advance in a USB port or in CD/DVD drive.

Turn on the laptop. In the process of loading the system, click the F11 button.

A window will appear. In this window, select the device from which we want to install the operating system. See the image from below. The window marked on it and arrows marked our devices.

By choosing a device, click the “Enter” button. The computer will automatically start loading the operating system.

I bought a computer almost five years ago. Gradually, he began to slow down more and more. I think the installation of “Windows” on the MSI laptop should solve the problem. But how to do that?

To work, you will need a disk with installation files of the operating system. Insert it into the drive and reboot the computer. At the beginning of loading, click F2 or Delete several times to go to BIOS. Here, change the data values ​​in the boot column. download to start loading from the disk. It remains only to go out, preserving the changes. Now answer the questions of the requirements of the installation program. then it will do everything herself.

The service center is engaged in the installation of a new one and upgrade of the old Windows operating system on MSAI laptops and 20 cities of the service engineers will diagnose a post.war, faulty PC and decide whether the old surveys are needed or required to update the old servers of the operating system. Masters will provide assistance in installing all Windows versions on MSI laptops: gaming, prestige, classic, with screen size 11.6 “, 12.1 “, 14”, 15.6 “, 17.3 “, 18.four”.

To find out the cost of restoring the operating system, contact the numbers of a round-the-clock call center. Managers will transmit information to the engineers of the service center, and they will say the exact price and time that will take the restoration of the device. You can familiarize yourself with the price policy of MSI repair with the service center with the help of the price list, which we posted on the site. Prepare a detailed description of the problem in advance so that managers transmit accurate information to engineers.

The reasons for the failure of the operating system.

The main reason for the “Krasha” of the Windows operating system on the Gaming, Prestige, Classic laptops is viral software. Malicious programs replace or delete files from the root folder that are responsible for the performance of the system. As a result, advertising banners appear, programs are launched without commands, laptop performance is reduced. Restoration of Windows XP/7/10 on MSI laptops of any version is a matter that requires emergency intervention of engineers, due to the fact that the user’s personal data are threatened. Find out the cost of repair by numbers of a round-the-clock call center.

To restore game and working laptops on Intel and AMD processors, which are performed by the masters of the official service center, a warranty for repairs up to three years is distributed. If the operating system fails during this period, and diagnostics will show the absence of the user to do this, engineers will eliminate the malfunction for free and issue a new guarantee. Repair work in the service center meet the requirements of the official distributors of MSIAI to which new, original components supply.