Video recorder mirror Vehicle Blackbox DVR User manual

Thank you for purchasing Vehicle Blackbox DVR RM-16D. car mirror video recorder. This manual contains complete instructions for using the Vehicle Blackbox DVR RM-16D, including things like functionality, settings, installation guidelines, and DVR specifications.

Before implementing Vehicle Blackbox DVR mirror recorder, please read this manual carefully.

We sincerely hope that our product will meet all your requirements and serve you for a long time.

Vehicle Blackbox DVR RM-16D. car DVR in the form of a rear-view mirror. A convenient mounting system based on rubber holders makes it easy to install the recorder in a car directly on the standard rear-view mirror. The recorder is absolutely invisible from the outside and does NOT attract attention, so there is a need to regularly remove it, unlike traditional models. A proven hardware platform ensures high-quality shooting in any conditions, and a number of software innovations make the device as easy to use as possible.


Display 2. On / off button 3. Menu button 4. Settings ❂ button 5. Up / left button 6. Down / right button 7. Record button 8. Speaker 9. Mounts 10. AV-OUT connector “analog video output” 11. TF connector “memory card” 12. AV-IN connector “analog video input” 13. MiniUSB connector 14. RESET button “reset” 15. Lens


Install the rubber mounting rings. 2. Fix the device firmly to the rear-view mirror. 3. Adjust the position of the DVR. 4. Connect the plug of the power adapter to the micro USB connector on the device. We recommend that you route the cable from the power adapter under the car’s interior trim. 5.Insert the power adapter into the cigarette lighter socket.

Connecting an optional REAR VIEW CAMERA

Route the wires for connecting the rear view camera inside the car. 2. Mount the camera firmly at the rear of the vehicle. 3. Connect the camera power wires to the car’s reverse light. Observe polarity, red wire corresponds to “” 12 V, black. mass. 4. Connect the signal cable of the rear view camera to the AV-IN “analog video input”.

Turning on and off

Hold the on / off button for 3 seconds to turn on / off. The device automatically turns on when external power is supplied. The device automatically turns off 10 seconds after the external power is disconnected. By briefly pressing the “on / off” button, you can turn on / off the screen of the DVR.


Briefly press the “settings” button для to switch between modes:

Video mode. recording video files. To start / stop video recording, press the “record” button.

Photo mode. shooting photo images. In order to take a picture, press the “record” button.

View mode. view all recorded files. To start / stop playback of the file, press the “record” button. Use the up / left / down / right buttons to select the desired file.


Briefly press the “menu” button to enter the “system settings” section. In the settings menu, in the upper left corner there should be a slider adjustment icon.

To select a setting item Use the “up / left” / “down / right” buttons, to change the item, press the “record” button.

Recording Resolution FHD (1920 x 1080) / HD (1280 × 720) Quality: Shooting Resolution

To exit the “system settings” section, press the “menu” button once.


When inserting a memory card, position the DVR and memory card with the front facing towards the user. Insert the memory card into the micro SD card slot. For withdrawal. push gently on the memory card and remove it.

Attention! Check if SD card protection is enabled so that you can record. Insert the SD card carefully, if the memory card is inserted in the wrong direction, it may damage the memory card or damage it. The data stored on the SD card will be deleted when recording.


In the “view” mode, when you press the “menu” button, additional actions with files are available:

Delete file?: Delete the selected file. Delete all files?: Delete all files. Unlock All Files: Remove Loop Deletion Protection from all files.

You can copy the recorded files to a computer for storage. Copying can be done directly from the SD card, previously removed from the recorder when the power is off. Or, simply connect the dash cam via a USB cable with a memory card inserted. The device appears on the computer as a removable disk or flash drive.

Note! The DVR simultaneously records from two cameras (main and rear view cameras). Recording files from each camera are stored in SEPARATE folders; DCIMA. main camera, DCIM Rear View Camera.

Attention! In order not to damage the SD card, before disconnecting the recorder from the computer, you need to click “remove device” in the taskbar.


When the Vehicle Blackbox DVR RM-16D mirror is connected to a computer via a USB cable, you must select the “PC Camera” mode to use the main camera of the DVR as a USB WEB camera.

On the computer, the device will appear as an external camera or WEB-camera. You may need to install a device driver.

PARKING MODE Rear view camera

When reversing, the DVR automatically enters the “parking” mode. The screen displays the image from the rear camera, in addition, lines are displayed over the image to help estimate the distance to the obstacle.

In parking mode, access to other functions, including settings, is not available. The exit from this mode occurs automatically at the end of the reverse movement.


You can charge the battery directly.Using a USB car charger, you can charge the dashcam when it is turned off or when it is turned on.

Battery level:

USB charging, USB data cable connect to the computer, and the other end to the USB port of the DVR, can be charged in the power on state.

To use the DVR during USB connection with a computer, you must select the “Recording Mode”.

DVR Operating Instructions

Car DVR Vehicle Blackbox DVR

User Manual for Full HD CAR DVR 1080p

Minimalism: I pick up a mirror in a car with a rear camera and a DVR. specific models

Buying a mirror with a navigator and a recorder in a personal car, the owner does not have to think about the scheme of its location on the windshield. The gadget will definitely not interfere, since it is installed on a regular mirror surface. Worrying about his position is also not worth it. The built-in front camera is grounded on a spherical hinge, therefore freely adjusts to the required position of the Smart device.

Fans of a budget solution, in which only 2 functions are combined, a recorder and a rear view camera, should not be worried either. It should be noted that the devices of this class are designed in such a way that sometimes you have to dismantle the standard mirror. However, this is not about the next person involved in this segment.

Navitel MR250

This is a device with a mirrored plane, which is integrated with a 5-inch IPS display with a resolution of 854×480. Let’s take a closer look at the factory configuration:

  • Power cord for cigarette lighter;
  • Rear view camera with video cable;
  • Elastic bands for fixing the device;
  • USB wire;
  • Microfiber cloth;
  • Gift certificate for one free hour of using Navitel cards;
  • Instructions.

Closest competitor. Phantom RMS 430 (3000 rubles).

Maximalism: mirrors with a navigator and a DVR and other functions for a car of any manufacturer

The multifunctional device is very convenient. In practice, it has the full functionality of a modern smartphone. In theory, the combine does not attract attention, since the camera is practically invisible.

If you have already decided to remove it, then quickly installing such a mirror in a car with a DVR is very simple. After all, any model of this class is attached to a regular mirror surface with two rubber bands. The contact is reliable. the device does NOT vibrate even on bumps.

  • Video recorder.
  • Antiradar.
  • Navigator.
  • Rear view camera / Parktronic.

Almost all Smart Mirrors have a SIM card slot. This suggests that Internet access. not a luxury, but a necessity. In addition, the devices are equipped with Wi-Fi and Bluetooth modules. Hence, it is easy to connect a smartphone with this gadget. It is just as simple to implement the Hands Free telephone communication technology. To do this, it is enough to activate the FM transmitter on the device and connect the phone to the multi-device via Bluetooth.

In short, to manage such a smart phone. pure pleasure. Communication is done through the touch screen. Another cool feature. infrared camera. At night, this device illuminates people and animals located at a maximum of 250 meters from the video recorder. The read information comes to the screen.

Parkcity DVR HD 900 (11,000 rubles) TrendVision MR-700GP (9,000 rubles) Artway MD-170 (10,000 rubles).

FAQ: how to set up and install a mirror video recorder yourself. Step-by-step guide and recommendations

The segment of the considered auto accessories includes quite a few devices from the “noname” category. Therefore, the first thing to look for when choosing. sensor response speed and processor (it is advisable to purchase a device with a quad-core “thinking module”).

Equally important is the equipment. its basis is identical to that discussed above (in Navitel MR250). The only thing that is added. this is a remote GPS module.

The desire to learn how to set up a mirror-video recorder yourself is quite predictable. Since the operating system of the tablet is mobile, the setup is identical to these devices. Basically, it involves downloading applications and manually regulating them.

For reference. The device can be powered at home using a regular USB cable.

Here is a list of useful auto apps for Android:

  • Realtimetracker (allows you to monitor where the car was during the day / month / year).
  • WI-FI File Transfer Pro (allows you to transfer files from the mirror to the smartphone and vice versa).
  • Antiradar Strelka (is a database on the location of radars and cameras).
  • Yandex.Navigator and Maps.
  • Pears TV (online broadcasting).
  • Navitel Navigator (best GPS navigation offline).

The installation process for Smart Mirror is quite simple and takes about an hour. Wired rearview camera is initially installed:

  • Remove the boot lid trim.
  • Remove the license plate light.
  • Mount the camera so that the cable remains on the back of the trunk.
  • Power it up from the reversing light.
  • Dismantle the plastic linings of the left rear and front sills, left pillar.
  • Remove front headliner from trim.
  • Route the camera cable to the rearview mirror.
  • Install all linings and trims back.

Note. The rear camera can also be located in the car.

In a similar way, the power cable is laid from the installation site of the multifunctional device to the cigarette lighter. Next, you need to mount the GPS receiver. To do this, degrease the surface with a mirror with white spirit and glue the sensor there.

After connecting all the cables, the first start-up of the mirror installed in the car with the function of a video recorder, navigator and radar detector is carried out. Here you should start configuring the video fixing module:

  • Find the optimal front camera position.
  • Choose your preferred recording resolution.
  • Set video cycle duration.
  • Enable display of time, date and speed on video frame.
  • Customize G-sensor.
  • Set an acceptable level of brightness and contrast of the image.

Setting up the recorder is the final operation in the technical process of setting up the equipment. Further, everyone acts at their own discretion. you can install additional Desired applications, for example, Yandex.Fine or Autodoc, etc., Or you can even complete the setup process.

To improve comfort and convenience, many drivers additionally equip cars with modern gadgets. One of the common solutions is to install a mirror-recorder. In this case, the rear-view mirror and the recorder are combined, all information about the situation on the road is recorded and stored, while the visibility is NOT closed, since the device is installed in the place of the standard mirror or is put on it.

What is a mirror-recorder

A modern solution that combines the functions of a rear-view mirror and a recorder is a recorder mirror. This is very convenient, since during the operation of the recorder, information is recorded and stored in the situation on the road, and the rear-view mirror is used for its intended purpose.


The peculiarities of this device are that the recorder is located inside the rear-view mirror housing, and this allows you to combine the functions of both devices. The registrar mirror includes the following elements:

mirror, rear, view, camera
  • Housing;
  • Main and parking camera. The rear camera can be wired or wireless, depending on the connection type. Its installation is carried out on the rear window, above the license plate or on the bumper;
  • Rearview mirror;
  • Registrar;
  • Monitor;
  • Memory card;
  • Battery.

The body contains an electronic filling, as well as a built-in video camera. A small display is installed on the front panel. The rest of the front panel is a regular mirror.

If the device is equipped with a parking camera, then while the car is moving in reverse, the video from it is transmitted to the display. There is a built-in battery inside the device, which allows it to work for a certain time in an autonomous mode. Also, the recorder has a place for installing a memory card, which can be removed and installed in another device at any time.

Working principle and functions

The mirror-recorder is a modern gadget and its functions will depend on the electronic filling. Externally, the mirror-recorder practically does not differ from the standard mirror, but depending on the equipment it can have the following functions:

  • Video recorder. The device can capture and save information in the traffic situation. Loop recording capability allows you to record a new video in place of the old one when there is not enough memory;
  • Radar detector. The driver will be notified in advance about the presence of cameras and radars on the track;
  • GPS navigator. With this function, you can plan a route, and the necessary information is displayed on the screen;

Manufacturers managed to combine several useful gadgets in one device, which help to increase the comfort and safety of traffic.

Types of recorder mirrors and features of their choice

If we talk about the types of modern mirrors-recorders, then among themselves they will differ in the available functions, that is, the electronic filling. Simpler and cheaper models only have a recorder function. In expensive versions, there may be a radar detector, a navigator, a parking camera and others. vary from about 1300 to 14 thousand rubles, the main price range is 2-7 thousand rubles.

When buying a recorder mirror, you need to focus on how much money you are willing to spend and what functions such a device should have. Features to pay attention to when choosing a mirror-recorder:

  • Parameters of the main and parking cameras. The quality of the shooting depends on the resolution of the camera. In budget versions, cameras with a resolution of at least 720×480 pixels are installed, but in expensive models. 1920×1080.
  • Recording format. Almost all modern devices are designed to work with a video file in AVI or MP4 format, therefore recorders work in this format.
  • Viewing angle. It is recommended to buy devices with a viewing angle of at least 120 °. Models available with viewing angles from 90 ° to 160 °.
  • Diagonal of the monitor. Typically 2.7 to 5 inches.
  • Versatility. It can be installed on any car model;
  • Compact dimensions. Since the entire device is located in the rear-view mirror housing, foreign elements and wires do not impair visibility;
  • Appearance. Design Almost does not differ from a simple rear-view mirror, therefore it organically fits into the interior design and does NOT attract the attention of thieves;

Although a recorder mirror has many advantages, like any other device, it does have some disadvantages:

  • The need to choose a device, taking into account the peculiarities of mounting a standard mirror;
  • In some cars, the rear-view mirror is not very securely fixed, so it may NOT support the weight of the new design;
  • In cheap models, poor-quality clamps or rubber bands are used for fastening, so there is a possibility of the device disconnecting while driving on our roads;
  • If one of the devices in the composition fails, then all other functions stop working.

Installation features

Any car enthusiast can independently install a mirror-recorder. If the device has only one camera, then it is enough to install it in place of the standard rear-view mirror using the existing mounts and connect the power supply. Some models can be fixed from above onto an existing mirror. It is a little more difficult to install a device equipped with a rear view camera, but here you can do everything yourself.

  • Mirror-recorder.
  • Mount.
  • Rear View Camera.
  • Rear view camera mount.
  • Wires.
  • Power adapter.
  • Fixing the mirror-recorder. The device is installed on a standard mirror and fixed with rubber mounts. Some models are mounted in place of a regular mirror.
  • Rear view camera installation. It is better to install it outside the car so that there is no interference and there is a better view. The housing is waterproof, so the camera is usually fixed with mounts above the license plate.

If the recorder is installed on a standard mirror, it is obtained at some distance from the windshield. In rainy weather or when the windshield is dirty, the device can focus on the glass and the background will be blurred, so it must be constantly clean. In the case of mounting a mirror-recorder instead of a standard mirror, the camera is close to the windshield and the image is obtained clearly.

Setting up a mirror-registrar

After the mirror-recorder is installed and connected, for its normal operation it is necessary to make settings. After turning on the ignition, the main camera starts working. An image appears on the screen for a while and then disappears. The fact that the recorder is working is signaled by the Blinking indicator. When the reverse gear is engaged, the parking camera is activated and the image is displayed on the screen.

You can manually configure the necessary parameters; for this, there are command keys at the bottom of the mirror:

  • Power button. Responsible for turning on / off the device, as well as for rebooting it.
  • Menu button. To enter the settings menu.
  • Star button. Designed to switch modes of operation, photo, viewing.
  • “Left”, “Right” buttons. Used to move forward and backward through menu items.
  • Confirms the selected menu item. Using this button you can take a photo and forcibly turn on / off the video recording mode.

Pressing the “Menu” key allows you to select the parameter of interest. Depending on what needs to be configured, a choice of functions is carried out:

  • Recording quality and format;
  • Switching between the main and parking camera;
  • Watching video;
  • Photo mode;
  • Length and cycle of recording;
  • Motion detection mode;
  • Image quality displayed on the screen.

Information appears on the screen of the mirror-recorder indicating the mode in which the device is operating.

TOP 11 rear-view mirror DVRs with a camera. How to choose a good device?

Multifunctional gadgets that combine several devices are becoming more and more in demand. Today we will talk about the DVR mirrors, which have gained maximum popularity recently. Fortunately, manufacturers go to meet users, creating modifications for every taste and budget.

The main plus of the mirror DVR. no need to remove it for long-term parking.

And with proper skill, the cables can be hidden so that the device will not be noticeable at all in the cabin.

How to choose the right model, starting not only from the price, but also from the functionality? Let’s figure it out now!

What to look for when choosing a mirror-like DVR?

  • Resolution The device must give a clear picture regardless of weather conditions and the degree of illumination of the track. Therefore, it is worth giving preference to a video recorder with a Full HD resolution (more than 1080 pixels). And also notice the interpolation function. with it, the image quality will reach a new level.
  • Diagonal If it is important for you to save more space in the car. look out for mirrors with a diagonal of 2.7 to 3 inches. It will be a tiny and compact display. However, such a device will NOT allow you to manage multimedia files and watch videos in the car. If it is important for you to use all the capabilities of the device “to the fullest”. pay attention to models with a diagonal from 4 to 6 inches. On six-inch, you can watch movies at all to reduce the time in traffic.
  • Frame rate. The most clear picture is provided by DVRs with a frame rate of 30 fps. Most budget hybrid DVRs are available at 25 frames per second. Unfortunately, the video obtained from such models will look like a quick change of static images.
  • Video codecs. Modern models Equipped with H.264 video codecs. Compared with good old MPEG, it gives video an order of magnitude better and at the same time saves disk space.
  • Additional functionality. Good choice. DVR with built-in battery. Without it, the survey will not be performed when the motor is off. Some models of DVR-mirrors are equipped with a navigator and a radar detector. Others. have the function of auto start and loop video recording. As for the latter. be sure to pay attention to the fact that they support large memory cards.

The best models with a rear camera

The most popular devices in terms of price and quality ratio.

Artway MD-175 Android 11 in 1, 2 cameras, GPS

Multifunctional car tablet mirror 11 in 1 for complete road control.

Artway MD-175 includes many useful features. Video is recorded in Full HD 1920 x 1080 with a viewing angle of 170 °, night footage is NOT inferior in quality to day.

The tablet has access to the Internet via 4G or Wi-Fi and runs on Android OS, which allows you to download the necessary applications from the Play Store, incl. To watch television.

The pre-installed navigator will make it easier to travel in city traffic. The portable waterproof camera is equipped with a parking assistance system and will be useful for both beginners and experienced drivers. Hands Free Bluetooth system keeps your trip safe.

And a special car assist application not only sends notifications to the smartphone when you act on the car, but also makes it possible to remotely watch the video on the smartphone from both cameras online. This can be useful in case of a parking accident or evacuation.


  • Number of cameras. 2;
  • Viewing angle. 170 °;
  • Recording mode. cyclical;
  • Length of the video. 1-5 minutes;
  • Matrix resolution. 1920×1080;
  • Operating system. Android 5.1;
  • Support for memory cards. microSDHC up to 64 GB.


  • Excellent Full HD video quality both day and night;
  • GPS informer for all police cameras, speed control, red traffic lights, traffic lanes, etc. ;
  • GPS navigator;
  • Large touchscreen IPS display 7.0 “;
  • Car assist application for online monitoring of the situation around the car;
  • Portable waterproof camera with parking assistance system;
  • Internet access 4G / Wi-Fi;
  • Hands Free.


  • The car assist application is in English, but the new firmware will fix this problem, according to the manufacturer.

Trendvision aMirror, 2 cameras, GPS

Android Controlled Dual Camera DVR.

Multifunctional, two-camera device with built-in GPS, GSM, high-quality navigation and informant in nearby cameras and radars.

Large, touch screen. Full HD shooting and the ability to watch videos on a bright screen.

Thanks to the Bluetooth adapter, you can transfer important information between your gadgets.


  • Viewing angle: 170 ° viewing angle;
  • Screen: 5 “;
  • Additional functionality: photography, built-in microphone, GPS;
  • Memory card support: microSD (microSDHC)
  • Working temperature: from 20 to 50;
  • Dimensions: 320x35x90 mm.


  • High-quality fasteners.
  • Android base.
  • Many useful features.
  • Laconic appearance.
  • Memory card support.


  • Not very clear picture taken in the evening.
  • The date and time on the record sometimes fails. have to reboot.
  • Low internal memory.

Artway AV-604 Super HD

Classic Mirror DVR with Superior Super HD Shooting.

SuperHD 2304×1296 shooting quality and a 140 ° wide viewing angle provide an excellent and informative video, which shows all the details on the road: numbers of passing and oncoming vehicles, road markings and signs, traffic signals, as well as pedestrians on the sidewalks.

The optional outdoor waterproof camera is equipped with a parking assist system. When switching to reverse gear, the image from the rear camera is automatically displayed on a large 5.0 “IPS display. Special positional lines are superimposed on the picture, which allow you to determine the distance to the obstacle.


  • Number of cameras: 2,
  • Number of video / sound recording channels: 2/1;
  • Recording 2304 × 1296 at 30 fps;
  • Recording mode: loop / continuous;
  • Functions shock sensor (G-sensor), motion detector in the frame;
  • Time and date recording;
  • Sound: built-in microphone (can be disabled), built-in speaker;
  • Connection of external cameras: yes.


  • Excellent shooting quality Super HD 2304×1296 at 30 fps;
  • HDR function to eliminate glare, glare and improve video;
  • 6 glass lenses;
  • Large IPS display 5.0 “;
  • Parking assistance system;
  • Motion and shock sensors.


  • Informative instruction;
  • There is an additional slot in the cigarette lighter adapter for loop-through of second devices.

With Playme VEGA radar detector, 2 cameras, GPS

Concise mirror video recorder with built-in radar detector and gps informer.

Easily attaches over a regular mirror and does NOT disturb the interior of the car.

DOES NOT distract the driver from the road, is invisible from the outside and DOES NOT create the sensation of a foreign object on the windshield.

It turns on automatically after power on. Has a built-in microphone.


  • Viewing angle: 146 ° (front camera), 100 ° (secondary camera)
  • Screen: 5 “845 × 480;
  • Additional functionality: built-in microphone, shock sensor (G-sensor), GPS;
  • Memory card support: microSD (microSDHC)
  • Working temperature: 20 to 65;


  • Excellent shooting quality.
  • Convenient and intuitive setup menu.
  • Large display.
  • Basic equipment is enough for self-assembly.
  • Built-in radar detector.


  • The mirror has a reddish tint.
  • Doesn’t always “catch” cameras.
  • Gives a blurry picture at night.

Vizant 955 VENOM, 2 cameras, GPS

Multifunctional Android mirror that will be a great addition to your car.

The video recorder runs on the operating system

Android 5.1.1. it is very easy to use as it is specially designed for the comfort of the Russian driver.

Warns about stationary radars using GPS base. In reverse mode. displays the situation behind the car.

During long stops, you can entertain yourself by watching You-tube or playing games from the Play Store.


  • Viewing angle: 140 °;
  • Screen: 10 “;
  • Additional functionality: built-in microphone, shock sensor (G-sensor), GPS;
  • Memory card support: microSD (microSDHC)
  • Operating system: Android 5.0.


  • DOES NOT interfere with glass.
  • Good parking camera function.
  • Good fastening.
  • High-quality GPS base.
  • The outside is almost indistinguishable from an ordinary mirror.


  • Moments slows down and runs slowly.
  • Rattles when driving.
  • Very sluggish software.

With radar detector Intego VX-685MR, 2 cameras, GPS

Combo device recorder, radar detector, GPS mirror module and rear view camera.

When the device is turned off, the built-in display is NOT visible. it helps to avoid attention from intruders.

With Full HD resolution, it delivers high-quality images with crisp details to help you prove your case when needed.

Additionally, you get a rear view camera that will become a convenient parking assistant.


  • Viewing angle: 160 °;
  • Screen: 5 “;
  • Additional functionality: built-in microphone, shock sensor (G-sensor), GPS;
  • Memory card support: microSD (microSDHC)
  • Working temperature: 10 to 50.


  • Suitable even for a regular Tolstoy mirror.
  • Increases the viewing angle.
  • Frameless and attractive.
  • Good build quality.


  • How a radar detector works every other time.
  • Loop recording does not work.
  • After filling the memory card requires formatting.

The best inexpensive models

Pioneer VREC-200CH, 2 cameras

A model with nothing superfluous. ideal budget option.

From the video obtained thanks to this video recorder, you can clearly distinguish the license plates and markings on the road within a radius of 20 meters.

The recorder continues filming even after disconnecting from the cigarette lighter socket. as a rule, this charge is enough to complete the recording.

Included reversing camera helps control what is happening behind the car and makes maneuvering easier.


  • Viewing angle: 120 °;
  • Screen: 4.3 “;
  • Additional functionality: photography, built-in microphone, shock sensor (G-sensor), battery operation;
  • Memory card support: microSD (microSDHC)
  • Dimensions: 312x94x30mm.


  • Automatic front camera recording.
  • Rear View Camera.
  • Convenient and simple settings.
  • Does NOT take up much space.
  • High build quality.


  • The screen is very pale.
  • Unrealistic color rendering.
  • Poor picture quality at dusk.


Smart mirror that captures high-format videos at 30 frames per second.

Thanks to the sensor and four glass lenses, you will get a lonely clear image both during the sunny day and late at night

Records everything that happens in front of your car.

Equipped with a built-in G-sensor, which marks videos, protecting them from being overwritten during a collision, braking or sudden acceleration.


  • Viewing angle: 120 °;
  • Screen: 4.5 “854 × 480;
  • Additional functionality: photography, built-in microphone, shock sensor (G-sensor), battery operation
  • Memory card support: microSD (microSDHC)
  • Dimensions: 310x39x86 mm.


  • Convenient management.
  • Large mirror width.
  • Light dimming helps to remove glare from headlights.
  • High quality rear view mount.
  • High quality shooting.


  • Video sound is too quiet.
  • Small battery capacity.
  • On video filmed at night “noises” come out.

Dunobil Spiegel Duo, 2 cameras

The choice of those who value functionality and convenience. it does not need to be switched off when you leave the vehicle.

Has an anti-glare coating, which is NOT scary bright lights from the headlights of cars going behind.

Facilitates parking for beginners. you just need to display the image from the rear camera on the DVR screen to perform a complex maneuver.

Video is recorded from both cameras at once.


  • Viewing angle: 120 °;
  • Screen: 4.3 “;
  • Additional functionality: photography, built-in microphone, shock sensor (G-sensor), battery operation;
  • Memory card support: microSD (microSDHC)
  • Working temperature: from 10 to 60;
  • Dimensions: 304x37x83 mm.


  • Wide viewing angle.
  • Long wires.
  • Affordable price.
  • Russian language menu.
  • Easy to set up.


  • The overall picture is very blurry.
  • Buttons rattle when the vehicle is moving.
  • Motion and shock sensors are junk.

VIPER C3-351 Duo, 2 cameras

Ideally attaches to a standard mirror, making the reflective surface larger and the view. wider.

The device is only noticeable upon closer examination, so at night it is impossible not to shoot.

The kit includes a second, rear camera, which can be installed from behind to capture what is happening from both sides at once.

In addition, this camera will be a great help for beginners who have NOT honed their parking skills yet.


  • Viewing angle: 170 °;
  • Screen: 4.3 “;
  • Additional functionality: photography, built-in microphone, shock sensor (G-sensor)
  • Memory card support: no;
  • Working temperature: 20 to 65.


  • Affordable price.
  • Good external camera.
  • The mirror element does NOT distort anything.
  • Easy to fasten.
  • Automatically switches modes.


  • Floor overwriting of old files does not work.
  • Blinking constantly, reminding you of the memory card full.
  • Control buttons stand out a lot.

NAVITEL MR250NV, 2 cameras

Smart-rear-view mirror, which gives an excellent picture, regardless of the weather conditions.

Documents everything that happens on the track, both front and rear of your vehicle, as two cameras work simultaneously.

The optional camera does not get wet. it can be fixed both inside the car and outside.

If the mirror DVR is connected to the cigarette lighter socket, the recording will start as soon as the engine is started.


  • Viewing angle: 160 °;
  • Screen: 5 “854 × 480;
  • Additional functionality: photography, built-in microphone, shock sensor (G-sensor), battery operation
  • Memory card support: microSD (microSDHC)
  • Dimensions: 310x39x86 mm.


  • DOES NOT interfere with the view.
  • Starts immediately.
  • Good fastening.
  • Clear and convenient control.
  • Nice, clean design.


  • Rear camera is bad at taking numbers.
  • Image shakes while driving.
  • The wires are fragile. have to look for a replacement after a couple of months.

Installing a DVR with a rear view camera

Considering the driving culture and the state of the national roads, it is not necessary to speak about the benefits of the DVR. And if until recently an ordinary video camera on a suction cup was the pride of a car owner, then the functionality of a modern recorder is comparable to the capabilities of a computer. Below we will deal with the selection criteria and consider how the installation of a DVR with a rear view camera takes place, depending on its design and your wishes.

Immediately about the main thing: decide on the type of device. There are only two of them:

The obvious advantage of the second option. possibility of stationary installation. At the same time, the windshield and torpedo are NOT cluttered with additional gadgets, and the DVR itself, outwardly indistinguishable from an ordinary mirror, and does not arouse interest among dishonest citizens.

Both types of two-channel DVRs of the latest generation with an external rear-view camera are equipped approximately the same, and their installation differs only in the way of mounting the display. about this.

Installing the mirror of the DVR with a rear view camera and connecting

The complete set of the mirror-video recorder includes: the mirror-monitor itself with a built-in front camera, a charger from the cigarette lighter, a rear-view camera, a 5-meter connecting cable, a set of fasteners (Fig. 1).

Figure: 1. Complete set of the mirror-video recorder

If you have chosen the right mirror, then quickly and easily fix it to the standard one using two elastic straps. Otherwise, you will have to dismantle the old mirror and purchase a separate mount for the new one.

How to connect power

Like a normal electrical appliance, the DVR can be connected to the on-board network anywhere, observing the polarity and the voltage consumed by the device, which is usually 5 V.

Depending on the make and model of the car, some of its electrical appliances are under constant voltage, and some are turned off along with the ignition. This moment determines the choice of the wire to which you connect.

The supplied charger provides power from the vehicle’s 12-volt mains. At the same time, in many models of DVRs, the cigarette lighter plug is equipped with a voltage converter from 12 volts of the on-board network to 5 volts consumed by the camera itself. Therefore, if you are NOT strong at electricians and do NOT want to buy a separate converter, it is not worth cutting off the charging plug. it is better to purchase an additional cigarette lighter socket, which will connect to the desired contact. In addition, such an installation will allow you to keep the DVR with a rear view camera intact for the period of warranty service.

Before working on the connection gadget Remove the minus terminal of the battery with.

To the cigarette lighter

The length of the charging cord allows it to be routed under the headliner and front right side pillar trims and then led directly to the cigarette lighter or glove compartment with an outlet. If you regularly use a cigarette lighter to charge second devices, consider this type of splitter as a tee with switches. very useful device for long trips.

With this connection, the recording is activated automatically when the engine is started. After turning off the ignition, the device turns off. But if the DVR has a built-in battery and motion sensors, it can activate recording even when the engine is off.

K interior lighting

This is the shortest and easiest way. Only need to remove the cover of the ceiling and find the positive lead. In this case, it is important NOT to confuse it with the one that comes from the relay that reacts to the doors, otherwise the recording will turn on every time they are opened.

Since in the vast majority of cases, the interior lamp is under constant voltage, the DVR will also be constantly active.

To the fuse box

It is usually located at the bottom of the front or side of the panel. On the cover of the block there is a diagram of the location of the fuses for electrical appliances (Figure 2) Having chosen a suitable one, you need to pull out its fuse, fix the red wire from the cigarette lighter socket to the positive terminal and insert it back (Figure 3). Negative contact. weight. goes to the mounting bolt. (Fig 4)

Figure: 2. Arrangement of fuses for electrical appliances

Figure: 3. Terminal

Figure: 4. Negative contact

With this connection option, the DVR will turn on when voltage is applied to the electrical device you have selected. If the latter is under constant voltage, you will need to turn off the recorder manually.

To battery

A good way to power the DVR. separate Leased line. The connection is similar to the previous one: the wire is led out under the hood to the fuse box. plus to plus, and minus can be fixed directly on the car body.

If, in addition to the cigarette lighter connector, you also purchase a power controller, you can independently control the voltage supply to the camera.

How to connect a rear view camera to a dash cam

This question consists of two parts: direct mounting of the rear view camera and its connection to the DVR.

Parking cameras are mortise and overhead. To install the mortise, you will need a bumper drill. Overheads are fixed on the glass with Velcro, on the bumper or on the lining. Velcro and self-tapping screws.

Waybill rearview camera can be mounted on the glass inside the cabin or outside. above the license plate (Fig. 5). It is clear that the first option is not considered if the rear window does not have electric heating and a wiper. But there is one more important disadvantage of this setup. you will NOT see the road directly under the wheels. And this function is very useful when reversing off-road.

Figure: 5. Options for installing a rear view camera

As you can see from the figure, laying the cable for connecting to the DVR when installing inside the cabin does NOT cause any particular difficulties. The situation is different with the external mount.

In this case, you will need:

Power is connected to the reversing lamp (red wire. To the plus of the lamp), video signal. to the corresponding connector (Figure 6). Thus, when you turn on the reverse gear, the recording is automatically activated and the picture from the rear camera is displayed on the screen.

Figure: 6. Wiring diagram for rear view camera

Throughout the cabin, the wire is pulled from the mirror to the trunk under the trim lining of the passenger compartment or is passed through the standard corrugation with wiring.

By and large, self-installation of a DVR with a rear-view camera, purchased in one set, should not cause much difficulty. But if you purchased a parking camera separately from a two-channel DVR and want to connect it, it is better to contact a specialist.