• Open the “Start” menu and select “Settings”. ” Devices”.
  • Tap the Mouse and touchpad on the left panel. Then at the bottom of the screen, click Advanced Mouse Options.
  • Press Multi-Finger. Scrolling and check the box next to vertical scrolling. Press Apply. Ok.

Here’s a list of key combinations to turn on the touchpad for common laptop brands:

lenovo, s145, touchpad, working
  • Asus. Fn F9 or Fn F7.
  • Acer. Fn F7.
  • Lenovo. Fn F8 and Fn F5.
  • Dell. Fn F5.
  • Sony. Fn F1.
  • Toshiba. Fn F5.
  • Samsung. Fn F5.

Learn more

If the function key that should activate the touchpad together with Fn doesn’t work, you should check if there is any special software provided by the laptop/netbook vendor.

Maybe the touchpad is disabled in the BIOS/UEFI. Study the manual for your handheld device, find the option with the word Touchpad located in the peripherals section.

Touchpad doesn’t work on your notebook, what to do and where to go?

First of all, we need to understand what the touchpad is and what the problem might be.

Touchpad (from the. touchpad. touch pad). The device for controlling the cursor in.

The device was invented in 1988 by George Geide, but did not gain popularity until 6 years later, after licensing and installation on PowerBook laptops from Apple.

Possible problems with the cursor control panel and their solutions are discussed below.

The majority of notebook owners prefer to use a mouse to work comfortably. rather than the built-in touchpad, the touchpad.

The need to disable the touchpad may arise when you have a stationary. as well as if you plan to type large amounts of text.

The fact is that while typing, it’s not uncommon that you can accidentally touch the touchpad with your shirt cuff, which causes the cursor to move over the text. In some models of laptops, the process of turning off the touchpad is automated, but you have to turn it on manually.

HP company, as well as some other laptop manufacturers, prefer to move away from the standard layout keys Fn Fx and remove the touchpad button directly to the touchpad, it is located in the upper left corner and for convenience has a light indication.

To fix the problem you need to enter the notebook BIOS. Go to BIOS-settings at boot stage, by pressing a certain key on the keyboard. The name of the key depends on the BIOS manufacturer. Usually it’s the Del key. Esc. F1. F2. F10 etc.

See also  How to connect iPhone to Smart TV LG

The moment when the key should be pressed can be determined by the appearance of the inscription with the name of the key to go to BIOS. If you start pressing them earlier or later you won’t be able to enter BIOS.

Operation of the touch panel is possible if set to “Enabled”, i.e.е. “Enabled”, if the set value is “Disabled”. the touchpad is off.

Important! Please keep in mind, that when you change BIOS settings you must save all your settings, otherwise the touchpad will remain disabled. All steps in BIOS should be performed hastily, so that, while solving the problem with the touchpad, you don’t create a new one.

Users who have just installed Windows 10 on their notebooks have different problems. One of the most common is that scrolling on the Windows 10 touchpad does not work. For a troubleshooting guide, see this article.

Using the software and tools of the operating system

The instructions are valid for all modern versions of Windows 10, 8.1, 7, etc.д.

  • Select the “Start” menu and go to “Settings” and then to “Devices”;
  • In the window that appears on the left, go to the “Mouse/touchpad” subsection;
  • In the box on the right, click on the “Advanced Mouse Settings” line;
  • The “Mouse Properties” will open, we need the section with the device settings (marked with a red icon);
  • Here you can enable or disable the touch sensor;
  • It remains to click “Enable(E)” and save the settings made;
  • After that, try to tap or swipe your finger to see if the cursor responds.

You can also check the functionality of the Touchpad in the BIOS settings

Let’s see how to properly implement the.

  • Reboot your computer, during startup you need to press F2 or Delete a few times (could also be F10, Esc key);
  • When the BIOS menu is displayed, navigate to Advanced and press Enter;
  • You need to look at the Internal Pointing Device function;
  • Make sure that it is set to Enabled, otherwise the touch module is deactivated and needs to be activated;
  • After setting Enabled, press F10 to save changes and wait for your computer to reboot.

Checking and removing drivers from external “mice

When using a notebook intensively and for long periods of time, users change “mice” in their work (for a variety of reasons), as well as other external devices, the drivers of which are then not uninstalled. Some of them may disable the touchpad automatically even after turning it on in manual mode. To diagnose and fix a problem like this, you need to:

If you find drivers from unused mice you must uninstall them. The system must be restarted after performing all operations.

The most important thing when working with BIOS. do not click unnecessary buttons, because you can easily ruin your system. First you need to figure out how to enable BIOS. To do this, turn off the computer, then turn it on and constantly press delete or F2.

The BIOS looks different on all laptops, but the essence of working with them is the same. After you have logged into the system, go to the tab “Advanced”, then to “Internal Pointing Devicе” and put the value Enabled. After what you have done save it with combination Y F10.

See also  How to turn off the voice on the Samsung TV

The keyboard and touchpad do not work Lenovo notebook. We have found a shaman’s way to solve the problem

The problem of non-functional keyboard and touchpad is found on several models of Lenovo laptops at once. In my case, they were Lenovo Ideapad B50-10 laptops purchased at the same time. The keyboard and touchpad might not work after shutting down or staying in hibernation mode for a long time (approximately overnight). And it happens not always, we could not identify the exact pattern, but the problem definitely manifested itself after the migration from Seven to Windows 10.

Just recently I told you that I managed to get the keyboard and the touchpad working again with a new BIOS firmware. Indeed, everything started to work, but the effect was temporary. On Lenovo support site it is possible to find some themes with discussion of the similar problem in different models of laptops, but either everything is reduced to meaningless check for viruses, or in despair they connect the external keyboard.

On one of the overseas forums I found an original script for getting the keyboard and touchpad working normally, although it looks like shamanic tambourine dancing and does not disclose the root of the problem.

Lenovo Laptop S145, Mouse Touchpad !!!!Not working!!!!100% Solution!!!!

Solve the problem with the keyboard and touchpad on Lenovo laptops

Completely turn off the laptop and connect the charger. Press and hold for about 20 seconds the “Power” button until the charging indicator light turns off. Next, just turn on the laptop and everything works.

As you see no drivers do not need to tear down / put, without the potions of toads and the tears of virgins, but still a solution is something like that. I understand that it is abnormal such shamanic actions every time to do magic on the laptop, but the way really works.

Didn’t find anything similar in the Lenovo maintenance manual. By the way, if you are interested you can find the link to it at the end of the article (not every manufacturer puts out a complete disassembly guide for their laptops).

I can assume that this is how the Embedded Contoller is reset. This is a built-in controller designed to control the platform (usually. The solution of the problem with F10 key (see “Mobile”) both at the power-on and power-off level and for handling ACPI events. The task of the EC-controller is to maintain the battery of the mobile platform: the choice of its charging mode, discharge control. As a rule, keyboard controller is implemented on mobile platforms with the help of EC-controller.

Usually this is done by turning off the battery for a while, but now almost all laptops are made with a non-removable battery and to get to it you need to disassemble the housing.

See also  How to set up satellite TV on TV. Setting up TV Samsung for satellite television on the example of NTV plus

If you find this article useful, do not be lazy to give teasers and share with friends.

Switching on the touch panel

If there is no touchpad in Manager, it is possible that the system simply turned it off when installing the software for some reason. There are a few options for easy turning it on:

  • Buttons on the keypad. Usually, it is the “FN” key at the same time as one of the functional (from F1 to F12). There may be a separate touch panel power button on the case.
  • Appendix from the manufacturer. If you did a Windows update rather than a clean install, you should have retained the touchpad software from its developer. All of the major companies create their own control panel utility with more advanced settings than in Device Manager or Windows Control Panel. Run this software and try to solve the problem with it.
  • In the Control Panel, go to “Mouse”, there should be a touchpad tab. Click the “Enable” button if the touchpad is not active. Look, there may be a “Disable when external pointer is connected” box, uncheck it.

If none of the above helped, you can try enabling the touchpad through the BIOS:

  • Reboot your notebook and enter BIOS before starting the operating system. There may be a prompt on the screen on how to do this. If it is not, determine this either from your notebook manual or experimentally. This is most often the F2 or F1 key, but can also be Del, Esc, F10, or some combination of these.
  • When the BIOS starts, go right to the “Advanced” tab, then down to “Internal Pointing Device”.
  • Press Enter and select “Enabled”.
  • Go to the tab “SaveExit” and exit the BIOS and save your changes.
lenovo, s145, touchpad, working

After that, Windows will boot and the notebook should see the touchpad. If it is still not there, then there is a problem with the driver.

Touchpad on your Lenovo laptop

The popularity of Lenovo laptops today is high all over the world. A large American company with production in China is also known in our country. High quality requirements and low cost make them a really good choice for many users. Alas, any technique can fail. And quite often the touchpad on Lenovo laptops fails. What to do in this situation? let’s figure it out!

What to do if the touchpad does not work on your laptop

You probably already tried rebooting your laptop to solve the problem, but if not yet. be sure to try. Since the touchpad does not work you will have to use your mouse or press the power button and using the arrow keys on your keyboard select “Reboot” in the menu that appears.