How to choose to boot from a USB flash drive on a Lenovo laptop?

  • To get into the BIOS of a Lenovo laptop, immediately after turning it on, hold down two keys on the keyboard: FnF2:
  • Using the arrows on the keyboard, go to the Security section.
  • Next, go to the Boot section.
  • And now we leave from here, saving the changes made.
  • Go to the Boot section.

How to install Windows 10 on Lenovo g50 30 laptop?

The steps of installing Windows on a Lenovo G50 laptop:

  • Call the command line with a set of “Fn” and “F2” keys immediately after activating the power button.
  • In the window that appears, set the following values: Boot mode = Legacy support; Boot Priority = Legacy First.
  • Select “Exit” and tick the required Windows version.

How to enter BIOS on Lenovo ThinkPad laptop?

To enter BIOS via function key (Fn)

Press F1 at the Lenovo logo. ThinkPad. ThinkStation or ThinkCentre at boot time.

How to reinstall Windows via BIOS?

Use the down arrow to open Advanced BIOS Features and press Enter. Press Enter on the highlighted item 1st Boot Device. A list of devices from which you can enable booting from a USB flash drive in the BIOS will appear. To boot from a USB flash drive, select the USB-HDD or USB-Flash item with the up and down arrows, and then press Enter.

How to install Windows 7 from a USB flash drive on Lenovo g50 30?

Installing Windows 7 on a Lenovo G50-30 laptop

  • In BIOS, in the Exit tab. OS Optimized Defaults and choose Windows 7 OS.
  • In the Configuration tab. Set USB mode to 2.0.
  • In the Boot tab. Boot Mode. UEFI switch to Legacy Support mode.
  • We have a new Boot Priority option in the BIOS.

What you need to do to enter the BIOS?

To go to the BIOS menu on a stationary computer, during boot, you need to press the Del key, in rare cases. F2. Usually the required key is indicated on the screen before displaying information about the operating system.

Method 1

To call the BIOS, for almost all models of Lenovo laptops, immediately after turning on the power, hold down the F2 (or FnF2) key.

In rare cases, you need to use other keys, such as: F1 (or FnF1) or just the DELETE button.

Method 2

Most Lenovo laptops have a NOVO button. this is a small button, or a hole next to which there is a curved arrow icon.In general, this button is installed next to the power button or on the right / left side of the device.

To enter the BIOS, you must turn off the laptop and hold down the NOVO button for a few seconds. After that, a menu will appear on the screen, in which, using the up / down arrows on the keyboard, select the BIOS SETUP item and press the ENTER key.

How to enter BIOS (BIOS) on a Lenovo laptop or computer

BIOS is a system that, at the initial stage, helps the operating system understand how to boot it and what functions to activate at the same time. There are several ways to enter BIOS SETUP on Lenovo laptops (IdeaPad, ThinkPad and IdeaCentre, ThinkCentre), let’s analyze the main ones.

Incorrect settings in the BIOS can disrupt the operation of your device, therefore, you need to be careful and understand your actions while making any changes.

Method 3

This method is suitable for Windows 8 / 8.1 / 10 versions.

Before proceeding to the first step of this method, try holding the Shift key and restarting your device through the Start menu. If in this way you got to the Select actions menu, then immediately go to step 4 of this method.

  • Press the Windows i key combination to go to the system settings;
  • In this window, select the Update and Security section;
  • Next, go to the System Restore tab and in the Special Boot Options item click the Restart Now button, after which you will be taken to the Select Actions menu;
  • Select Troubleshoot.
  • Next, select the item Additional parameters
  • UEFI firmware options;
  • And already in the last menu, select the restart button. After that, your device will automatically go to BIOS settings.

ATTENTION! If none of these methods work, then, after disconnecting the laptop from the network and disconnecting the battery, open its case (bottom cover) and remove the flat battery from the motherboard for 10-15 minutes. This will reset the BIOS settings. Then return everything back and, when turned on, try the first 2 methods again.

Why do we need BIOS?

The laptop is available in various modifications. Why would you need to know how to enter the BIOS of Lenovo G50 and other laptops in the series? Of course, Lenovo strives to provide customers with perfect solutions that will require a minimum level of knowledge from the owner in the process of setting up and maintaining the hardware configuration. At the same time, you need to understand that no computer can be 100% insured against the manifestation of such unpleasant phenomena as critical errors and malfunctions. It is these moments that dictate the need to have information on how to enter the BIOS of Lenovo G50 of various modifications.

READ  How to enable WEB-camera in BIOS

How to enter BIOS of Lenovo G50 and other notebook series

Probably, every user of a modern laptop at least once during use had to enter the BIOS settings. Such a need, of course, was not on the side of Bosch and users of the solutions of the famous Lenovo company. The manufacturer produces a large list of laptop models, and this leads to a variety of methods for using individual functions, including calling the BIOS setup screen. Let’s try to figure out how to enter the BIOS of Lenovo G50. one of the most popular brand laptops.

Windows 10

Modern trends in the development of the computer industry have led to the fact that most laptops are equipped with a new version of the BIOS settings management system. UEFI. In addition to various additional functions, this hardware configuration management software brought the ability to reboot the BIOS directly from the operating system. Let’s take a look at the Lenovo G50-30 as an example. How to enter BIOS using the capabilities of Windows 10?

Enter Lenovo G50-80 Bios Setup & Enable USB Legacy Mode. Install Windows 7/8/10

To reboot to the UEFI settings screen directly from Windows 10, you need to go the following way.

  • We call the “Computer Settings” screen. To do this, you need to click the “Options” button located in the “Start” menu.
  • In the Windows Settings window, go to the Update and Security tab.
  • The next window is called “Recovery”.
  • Next. pressing the “Restart now” button located in the “Special boot options” tab.
  • The laptop will reboot and a screen will appear in front of the user.

Next, you should take the following actions:

  • We select the item “Troubleshooting”.
  • Go to the “Advanced options” menu.
  • Further. UEFI Software Settings button.
  • After clicking the “Restart” button, the laptop will reboot into the UEFI-BIOS.

Command line

To reboot to the screen with which you go to the BIOS settings, in addition to the above method, you can use the command line capabilities. To do this, use the command: shutdown.exe / r / o

Branded NOVO button

One of Lenovo’s proprietary offerings to its customers is the Lenovo OneKey Recovery software, a system designed to back up and restore data to Lenovo-branded computers. In terms of launching BIOS settings, the hardware component of the system in question is noteworthy. the Novo key located on the laptop case.

Various configurations

Despite the fact that “Lenovo” produces notebooks of a wide variety of hardware, the procedure for entering the BIOS for them is generally the same. In order to call the setup function, you need to use the hardware buttons on the laptop or their combinations. For example, there is a Lenovo G50-70 laptop. How to enter BIOS? It is necessary to press the F2 button on the keyboard or use the FN F2 keys when turning on the computer. It should be noted that in other modifications G50 notebooks from “Lenovo” require the user to do the same to call the setup screen. That is, the answer to a question often asked by owners, for example, Lenovo G50-30, how to enter BIOS, will be using the same key combinations as in the 50-70 model.

Why doesn’t it work?

A situation may arise when the window with a choice of items does not appear. The first thing to make sure in this case is that the laptop has been turned off completely.

The second point that does not allow to achieve success is often “overexposure” or, conversely, pressing the NOVO button too shortly.

How to enter BIOS?

On ordinary laptops, the Enter or F2 buttons help with this. But it’s a completely different story with the Lenovo G50-45. How to enter BIOS on this laptop?

Somewhere on the side of the device, in the area of ​​the power connector, there is a small invisible button. We need it. Sometimes it is indicated by an arrow. But it may well be without an arrow. This is the “New” button. It provides various options for loading a laptop:

  • boot into BIOS;
  • normal load;
  • boot menu;
  • System Restore.

In our case, we need to select boot in BIOS. Here’s a tricky button.

Pay attention to the fact that in some models of laptops “Lenovo” (for example, B580 or B590) this very button may be located next to the power button of the device. However, there is another way to enter BIOS on the above models. you need to press the Enter key at boot time, see the desired line in the menu and press F1 to access the BIOS settings. In particular, this applies to the B580 model. As for the Lenovo G50-30, we already know how to enter the BIOS of this laptop. With the help of a small and inconspicuous “Novo” key. Let’s go to the main BIOS settings on laptops “Lenovo”.

READ  Lenovo b50 10 how to enter BIOS

Settings for installing Windows 7

Recently, Lenovo laptops come with a preinstalled Windows 8 operating system. But it does not suit everyone, and when you try to install a “seven” on a laptop, the laptop starts to show up with errors. The situation can be saved by the competent setting of the BIOS of the device.

Let’s take a look at the example of the Lenovo G50-30 laptop. We already know how to enter the BIOS, so let’s go straight to the settings. We go to the Exit tab and look for the OS Optimized Defaults item there. There is a Windows 8 system. We need to change it to “seven”. That’s all!

However, after that it is necessary to load the optimal BIOS settings. This must be done before each installation of the operating system:

lenovo, enter, bios
  • for this, on the same Exit tab, select the Load Default Settings item;
  • then you need to click OK;
  • press F10;
  • restart laptop.

After performing all these manipulations, the installation of the seventh version of “Windows” will be possible. No more problems.

How to change the boot order?

Sometimes you need to change the boot order of your device. That is, to make sure that the laptop is not loaded from the hard drive, but from the installation media (CD or flash drive). Consider a Lenovo G50 laptop:

  • We already know how to enter the BIOS, so we will skip this step.
  • After pressing the notorious “Novo” button, a menu will appear, where, among other things, there will be an item Boot Priority. This is what we need.
  • Go to this item and see a list of devices that are currently available for download. If you install the operating system using a USB drive, then you need to select the USB-HDD item.
  • And if an optical disc is used as the installation media, then select the item “ODD-device-name”.

After that, the computer will start to boot not from the hard drive with the preinstalled operating system, but from the bootable media. And you should be able to start installing the system.

How to enter BIOS of Lenovo G50? Recommendations

Lenovo notebooks are extremely popular in Russia and other countries. This is due to the fact that laptops are reliable, unpretentious, productive and have an adequate cost.

Why you need to enter BIOS?

BIOS. it is the basic I / O system. It is she who allows you to communicate with a PC or laptop at the hardware level. BIOS settings greatly affect the performance of the computer as a whole. You also need to go into it before installing the operating system in order to choose to boot from the installation media, and not from the hard drive. In general, it is very useful to know such information, as it may be useful in the future. And at the most inopportune moment. Therefore, it is highly recommended to know how to enter the BIOS of Lenovo G50 or some other equally capricious laptop model.

On top of that, the BIOS can be incredibly useful in restoring your computer to work. It is he who can reset the hardware settings to the factory settings. Among other things, it is the settings of the basic I / O system that regulate the operation of the hardware filling of the laptop. Therefore, let’s take a closer look at the question of how to enter BIOS Lenovo G50.

lenovo, enter, bios

So how to enter BIOS of Lenovo G50? The answer to this question has been received. There is a special button called “Novo” to enter the BIOS. It can be located both on the side of the device (near the charging socket) and near the laptop power button. Pressing this button activates an alternative menu, in which there is also the possibility of entering the BIOS. This is very convenient, although very unusual for some old PC users.

How to install Windows 7 on Lenovo G50-30

Go to the Lenovo office site and download the latest firmware for the Lenovo G50-30 BIOS. Here is a link to the website http://www.lenovo.com/ru/ru/

To download the firmware for BIOS Lenovo G50-30, you need to follow the above link and select the Support section in the site header

A drop-down menu will appear where we select Lenovo and Think Product Support

READ  How to enter the recovery menu on Samsung

We fill in the form. Specify the series and model of the laptop and click Go.

In the Component window, select BIOS. In the Operating system window: Windows 7 (64-bit) Click BIOS Update Why Windows 7 (64-bit), but there is simply no firewood on 32-bit.

The latest BIOS version of Lenovo G50-30 has been downloaded. There shouldn’t be any difficulties with BIOS firmware. Run the downloaded file and follow the instructions of the installer. The laptop must be powered by the network. Make BIOS settings default.

We clear the laptop hard drive from all partitions on it. I just installed the Windows 8 boot image into the drive and set the drive in BIOS priority and started the system installation. I got to choosing a partition for installing the OS and deleted all partitions on the hard disk, leaving an unallocated area.

How to install Windows 7 on lenovo g50-30

How to install Windows 7 on Lenovo G50-30? What settings need to be set in the BIOS Lenovo G50-30, with preinstalled Windows 8 to install Windows 7. They brought me a Lenovo G5030 laptop to reinstall the OS from Win 8 to Win 7. Well, what did I decide Windows 8 like Windows 8. As they say. every whim for your money.

Installing seven after eight is not for me in the first. I know that you need to set certain settings in the BIOS, and the process is started. And with this machine there will be no problems, I decided, and proceeded to install Windows 7. The pitfalls appeared immediately in the first steps. Couldn’t enter BIOS Lenovo G50-30.

I got into no, and a solution to this problem was found immediately. As it turned out on this model, on the left side, next to the power cord connector, there is a BIOS lock button.

How to enter BIOS on Lenovo G50-30

In order to enter the BIOS of a Lenovo G5030 laptop, you need to turn it on, then press the BIOS lock button, and when the Lenovo logo appears on the laptop monitor, simultaneously and briefly press two keys on the FnF2 keyboard.

Further, after these simple manipulations, a window will appear in which you need to select BIOS Setup. This is done using the arrows on the keyboard.

Then disabling the Windows 8 UEFI bootloader. Included compatibility with Windows 7. Started installation. After copying the files, a blue screen of death appeared on the laptop screen with the error The BIOS in this system is not fully ACPI compliant Stop 0x000000A5.

I will not list all my attempts, which nevertheless led me to the correct solution to this problem, but rather reflect the entire algorithm for installing Windows 7 on Lenovo G50-30, in detailed instructions.

Configuring BIOS for installing Windows 7 on Lenovo G50-30.

Go to the BIOS Configuration section. Switching the SATA Controller Mode option from AHCI mode to Compatible mode.

In the same Configuration section, switch the USB Mode option from USB 3.0 mode to USB 2.0 operating mode

We move to the Boot section. Here we need to disable the Windows 8 UEFI bootloader. To do this, switch the Boot mode option from UEFI mode to Legacy Support mode.

Note after we switched the Boot mode option from UEFI to Legacy Support, a new Boot Priority option appeared in the BIOS.

lenovo, enter, bios

We continue to configure the BIOS on Lenovo G50-30 under Windows 7. Switching the Boot Priority option from UEFI First mode to Legacy First mode.

The final configuration step is the Exit section. Here you need to optimize the BIOS for Windows 7. To do this, switch the OS Optimized Defaults option from Win8 64bit mode to Win7 OS mode.

After all these manipulations, I installed Windows 7 on Lenovo G50-30