How to make a webcam from Android smartphone

Any mobile device operating on the Android base can be turned into a webcam for a computer or laptop. This is especially useful if PC is not equipped with equipment. The function can be applied for video surveillance, calls, direct broadcasts. In the “System Administrator blog” we will analyze how to use a smartphone as a webbing for Windows 10. You can do this in several ways, you will need a USB cable or a Wi-Fi access point, as well as additional software.

The DroidCam application is one of the most downloadable and effective utilities that allows the use of Android devices as a full-fledged webcam. To connect via wireless communication, it is necessary that both devices are connected to one Wi-Fi access point. If this is not possible to realize, then through this program you can make a smartphone with a webcam using a USB cable.

By Wi-Fi

To make a webcam from Android on Wi-Fi, act as follows:

Install the application from the official Play Market store on a smartphone. 2. Run the installed software.

Then you need to install a special software on a laptop or computer. DroidCam Client. 4. After the installation, you will need to restart PC. Then open the utility and enter the IP address and the port that are displayed on the smartphone screen in DroidCam.

If you need to transmit through a mobile device not only the image, but also the sound, then put a checkplace opposite the Audio item. 6. Click on the Start button.

Use your PHONE as a WEBCAM in OBS! // NDI // Tutorial

If there are two cameras on the phone, then you can switch between them using an icon in the form of a camera with an arrow, which is located in the top panel of the application on the right.

In the program integral on the laptop or PC, a window opens in which you can see the image from the smartphone camera. It turns into a system tray if you use the Ctrl H key combination.

It should be noted that when using programs where a webcam is required, you need to select a DroidCam device in its parameters. The same goes for sound.

By USB

The DroidCam application allows you to use Android as a webcam and by synchronization of devices on wired connection. First you need to activate USB debugging in the mobile device:

Activate the developer mode. To do this, go to system settings. Then select “Information about the phone”. 2. In the window that appears, select the “Information OD” item.

Slide seven times according to information about the assembly issue. At this time, a warning will be displayed that there were several steps left until the hidden option. 4. Return to the section with the settings and scroll the menu until the end. A new item will appear below. “Developer Parameters”. Choose it. 5. Find the “debugging” block and activate the “USB” debugging function.

After activating USB debugging, connect the smartphone to a computer or laptop using a cable and act like this:

A window will appear where it is necessary to allow debugging by USB. 2. Launch on a mobile device and on PC DroidCam application.

In the program on the computer, select the ICB in the form of a USB connection. 4. In the drop.down list, select a mobile device. 5. Click on the Start button.

possible, connect, phone, camera, computer

After the procedure done, the smartphone will function as a webcam on a computer or laptop. All settings are similar to the previous method.

Connecting a portable electronic device as a webcam to PC

There are three main ways to turn a digital gadget into a computer chamber:

The latter method is used in the absence of a Wi-Fi router (network router), USB cable or to monitor the object at a certain distance.

Connection via cable

This is the easiest way to synchronize devices. For their connection, the USB-Micro-USB cable is used.

possible, connect, phone, camera, computer
  • A cable plug is inserted into the computer connector.
  • Micro-USB plug is inserted into the gadget connector.
  • In the settings of the mobile device, the “Developer Settings” or “Developer Parameters” section opens.
  • At the “USB debugging” point, a checkmark is installed.
  • Special applications for a mobile phone and PC are used.

Connection via a Wi-Fi network

When implementing this method, the device is connected to the Wi-Fi access point and applies for synchronization of the computer and smartphone.

Connection via mobile Internet

For connection, use utilities for the gadget on the Internet on the mobile Internet and a software adapter for PC.

IP Webcam

Let’s start the analysis of applications with the already mentioned IP Webcam. The application integration is quite ascetic, but there is all the most necessary. You can install a login/password for a client application or choose a port for communication with the server. The application supports the flow of the maximum possible resolution of the camera. You can connect to a phone camera via a web browser or a desktop application. It is also possible to install video permission through a mobile application or through the client’s desktop application. From the interesting. using the phone as a video surveillance camera. The broadcast can be viewed in real time through a protected web portal.

possible, connect, phone, camera, computer

DroidCam is a small utility with a minimum set of necessary functions. Like other applications in the list, it is able to connect to the mobile version through a web browser or a desktop application. DroidCam also provides additional capabilities of connecting via USB or Wi-Fi. This is a great option, since the delay when connecting via USB will be minimal. Unfortunately, the application supports resolution only up to 480p in the free version. For Full HD will have to pay. In addition, there is an advertisement in the free version.

Is it possible to use a smartphone for remote video surveillance?

Yes, it is quite. Only for the same goals you need to choose the corresponding application. To make a remote video surveillance camera from the telephone camera use Alfred, Manything, Wardencam, IP Webcam programs. With the help of similar software, you can even strive.

IP Webcam program

Download the IP Webcam program on a smartphone. The utility is distributed free of charge, the Russian.speaking Inte Wee. Launch loaded software on PC and phone. Turn on Wi-Fi on a mobile device and click the “Launch” button in the main window of the IP Webcam application (at the very bottom).

The program will display the IP address, which must be entered on the client’s official website. To do this, you need to enter the address that will issue an application into the browser line. In the video setting window, you can set the image resolution. By default, software automatically determines the quality of the camera on the phone. After the IP indication, the video from the smartphone to the computer will begin to broadcast.

In the IP Webcam program, you can enable the video recording function. MPEG4, Webm and MOV formats are supported. For web speculation of the stream image, JavaScript, Flash formats and a special mode built in the software are supported.

The utility supports the function of sound and movement recognition. Sound transmission from a smartphone to a computer is performed in three formats: AAC, OPUS and WAV.

How to use a smartphone as a webcam-an overview of available solutions

The easiest option in the absence of a high-quality webcam is to install specialized software. It is worth noting that it will need to be installed both on a PC or laptop and on a smartphone. Here is a list of applications that will help turn a modern smartphone into a webcam:

How to make a web camera from the IVCAM program phone

The IVCAM application is installed on both user devices, and then, thanks to a USB cable or Wi-Fi connection, the smartphone begins to perform the functions of a webcam. If desired, you can reduce or increase the quality of the video, configure the sound and number of frames per second.

How To Use Your Smartphone as WEBCAM | EASY METHOD

  • High quality and low Ping.
  • Intuitive user integrated integrated Russian language.
  • You can connect several necessary devices to the computer at once.
  • Supports all the most popular formats, up to 4K.
  • You can use any camera installed in the smartphone (main, frontal, wide.angle module, etc.D.).
  • Almost all functions of the mobile device camera are available: flash, Focus, effects, etc.D.
  • A watermark that blocks part of the image.
  • Stable application operation is guaranteed only if the user device operates on the iOS platform.
  • The presence of advertising.
  • With Wi-Fi connection, problems with FPS often arise, and when connecting via USB, everything works much more stable.
  • Too many restrictions in the free version of the application.

In addition to the image, this application perfectly conveys the sound, so the smartphone can also be used as a microphone. In addition, you can take pictures and record a video in the process of communication.

Phone instead of webcam using EPOCCAM

The main feature of this program is that it is supported by both Windows and MacOS. With this software, you can interact with the webcam in Zoom, broadcast on Twitch and many other platforms.

  • The connection of the connection is automatically.
  • You can use both the main and front chamber of the mobile device.
  • User devices can be connected at a distance of up to 6 meters.
  • You can use a smartphone as a wireless microphone.
  • There are problems with installing the connection.
  • Ping moments are very high.
  • Often does not work on Samsung Galaxy and Honor smartphones.
  • The presence of advertising.

Using the phone as a web camera using the IP Webcam program

Using this software, you can conduct real.time broadcasts on various platforms. Often people use this program as a video surveillance camera.

  • If necessary, you can derive the date and time, as well as the state of the battery.
  • You can record video in various formats.
  • This program is compatible with other applications.
  • When using the free version of the application, a watermark is imposed.
  • Many advertising banners in the free version of the application.
  • Many users have problems when entering such applications as Zoom or Skype.

Webcam from the phone using the IP Camera Adapter program

IP Camera Adapter is a utility that is installed on a user computer. It is compatible with the IP Webcam application, which is described above and is intended for smartphones.

  • The ability to use a webcam using mobile Internet and Wi-Fi.
  • You can configure the sound, quality and orientation of the camera.
  • It is possible to record video and audio in various formats.
  • You can derive the date and condition of the battery.
  • You can use a smartphone as an IP camera.
  • You can’t connect using a USB cable, only a wireless connection is available.
  • If you use the free version of the application, watermark will be imposed on the video.

How to make a webcam from a smartphone using the DroidCam program

This application will help quickly turn a mobile device into a webcam. You can communicate in video conferences and conduct broadcasts on various platforms, in particular, such as Twitch and YouTube. In addition, using this application, you can use a smartphone as an IP camera.

  • You can use both Wi-Fi and USB connection.
  • The application can work in the background.
  • Intuitive user integration.
  • The ability to record video with sound.
  • Advertising in the free version of the application.
  • Quality from 720p is available only in the paid version of the application.
  • In the free version of the application, you can not use the flash, Focus, approximation and other functions of the mobile device camera.

We turn Android into a webcam using DroidCam

DroidCam Wireless Webcam is one of the most popular and simple applications for such purposes. It allows you to easily turn the Android phone into an IP camera with access on a local network or (after some manipulations)-via the Internet or in a webcam for use on a computer via Wi-Fi or USB cable.

  • Download the free DroidCam application on your Android phone from Play Market. https: // Play.Google.COM/Store/Apps/Details?ID = COM.DEV47Apps.DroidCam. You can immediately start it, after the screen with basic information, the camera is automatically activated and in the application window you will see the address of the webcam in the local network. Attention: both the computer and the phone must be connected to one network. If this cannot be implemented, then an additional method of connecting via USB will be described.
  • Download and install the DroidCam Client program on the computer from the official website https: // www.DEV47Apps.COM/DroidCam/Windows/
  • Launch DroidCam on the computer and enter the IP address displayed on the phone. If desired, mark the “Audio” item to transmit not only the video, but also the audio. Press the Start button.
  • As a result, after connection, you will see the image from the phone camera in the DroidCam window. This window can be curtailed (or press Ctrlh to turn the program into the notification area), and then open any program in which you need a webcam, if necessary, select the desired DroidCam camera in the program settings.
  • If you need to choose a front or main phone camera, you can go to the DroidCam settings on the phone and open the “Camera” item.

Most applications for video conferences of the DroidCam webcam work successfully, but I failed to force it to work in the built-in Camera Appendix. Unfortunately, in my case, the camera turned out to be inverted (although, in general, you can change the position of the phone), and the options for the turn and reflection of the camera are not available in the free version of DroidCam.

If you cannot connect the computer and phone to one network, you can use the phone connection via USB, for this:

  • Turn on the USB debugging on your Android phone, connect the phone with a cable to the computer and allow the debugging on the phone screen. Launch the DroidCam application on Android.
  • In DroidCam, select a USB connection on a computer, specify your device on the list and click Start.
  • The remaining steps will be the same as in the previous case.

Using the IP Webcam application

A great option for those who do not want to limit themselves to the framework of a USB-wire or a reception zone. The application, of course, allows you to connect a smartphone as a wireless webcam, however, the main value of the utility is the function of turning the gadget into an IP camera for video surveillance at any distance.

To use IP Webcam, the user needs:

  • Download and install IP Webcam on your smartphone.
  • Download and install ipcamadapter on a personal computer.
  • We launch the program and set the main video transmission parameters, such as resolution (maximum 800 x 480), such as a camera (main or frontal), focus, flash, color balance and personnel restrictions per second.
  • We set up the type of network connection: select between IPV4 or IPV6, drive the port number (initially 8080 is installed here) and put the password for additional safety.
  • Press the “Start Broadcasting” button.
  • Choose the item “How to connect” and the method of connecting directly (mobile network or Wi-Fi).
  • We get the address of the format http: // 168.one.40: 8080.
  • We use this IP to access broadcasting through any browser, VLC player or Skype.
  • We set up the viewing, listening mode and quality parameters, approximation and the like.

Among the advantages of IP Webcam, expanded functionality and a simplified connection process that does not require the installation of additional drivers specifically for your gadget is especially highlighted.

Skillful use of a smartphone makes it a useful and almost indispensable device. Installing one application gives access to a huge number of potential functions, so do not neglect the excess opportunity. The main thing is to carefully follow the instructions and do not get carried away with hidden supervision.

BYRGPUB.COM 2022