iPhone does not turn on and asks to urgently connect it to iTunes, what to do?

The problem is frequent and well known to servicemen, not fixing it takes about half an hour of work and 1500-2000 rubles of money. In order not to waste the family budget, we will try to turn on the iPhone on our own, at home.

Hard reboot

iphone, update, itunes

Instructions on how to make a hard reboot, if the iPhone does not turn on, the iTunes icon and cable appear on the screen

  • We hold down the lock button and the “home” button
  • We are waiting for about 5-10 seconds
  • Chances are, phone glitches will disappear
  • If it does not help, look at the previous section, and repeat everything according to the instructions.

The reasons

There are many reasons, it is difficult to systematize them, but several popular ones can be distinguished:

  • The firmware flies. it is because of this that the iPhone 5, 6, 7 models do not turn on, iTunes and the lace are on. We will consider how to reflash the device in the next section.
  • A hardware error, as a result of which some system files were deleted or corrupted, again, a flashing will help. Craftsmen call it “iPhone hung on a string”.
  • The error can occur after falling onto a hard surface
  • Water ingress into the device.

What to do if the iPhone seems to be loaded, but does not turn on, issues a “string” and asks to connect to iTunes? Consider the options for solving the problem below.


To turn on the broken iPhone, we follow the instructions clearly. If you don’t understand something, at the end of the article there will be a video instruction on how to turn on an iPhone of any model through the official iTunes software if it does not turn on. The instruction is applicable to all models of Apple smartphones, 4, 5, 5S, 6, 6 plus, 7, 7 plus.

  • Download a program called iTunes from the official Apple website (link).
  • Install iTunes and download the firmware for your iPhone model.
  • We turn off the iPhone and connect it to the computer using a standard cable from the kit (you can replace it with a good copy).
  • For 5 seconds, hold down the “HOME” and “POWER” buttons together, wait about 10 seconds.
  • After 10 seconds, release “POWER” (aka blocking), but leave “HOME” pressed!
  • After a while iTunes will display a message about DFU mode, now we proceed to restore the firmware.
  • In the iTunes program, find the “Restore” button and hold down “Shift”, press it.
  • In the window that appears, select the previously downloaded file with the extension.ipsw, confirm the choice.
  • The firmware recovery process has started, now we are waiting for completion.

It must be remembered that when flashing, all data will be erased. If you do not have a backup or you have stored all the photos on a deceased device, without using iCloud, it will not be realistic to restore them. In this case, you need to immediately contact authorized service centers, they will help, but they will ask for good money for the work.

Possible difficulties

If errors occur during the flashing process, for example, an error warning appears. then the situation is much worse. Most likely, an important microcircuit inside the phone is damaged, it is unlikely that it will be possible to fix it on your own. In this case, you will have to contact the repairmen, since it is not realistic to re-solder the microcircuit without special equipment. Although our craftsmen have learned to do this too, I will leave a video about soldering the microcircuit with my own hands, suddenly someone will come in handy.

Sometimes there are other types of problems when the iPhone does not turn on, a daisy is spinning on the screen and nothing happens. Most likely, you will have to reflash the device, but first we will try to do a hard reboot, it will suddenly help. Do not be alarmed, there is nothing complicated and scary, you will not even lose data, as if you still decide to reflash your iPhone.

Method 3. DFU

DFU stands for Device Firmware Update and is the deepest recovery mode for iPhone or any iOS device. It will completely destroy information on your iPhone but after that it will work as if it were just out of the box. The device will stop freezing, it will work faster and there will be no crashes or errors in applications.

The first step is to launch iTunes and connect your phone. For iPhone 6S, hold the Sleep / Wake and Home buttons at the same time for about 8 seconds. For 7 and newer versions, also hold these buttons together with “Volume Down” for 8 seconds. After 8 seconds, release the Sleep button, but continue to hold the Home or Volume Down buttons, depending on the model. Your iPhone screen will go dark for a while and then the device will enter DFU mode. Release all buttons and select “Restore iPhone”. This solution is used by professionals and it helps when iPhone freezes on iTunes and in other situations.

How to fix iPhone stuck on lanyard. 4 ways

Sometimes it happens that the iPhone freezes and the iTunes logo is visible on it, which indicates that the firmware recovery process is starting. After a certain time, the phone will update the software and return to normal operation. But in some situations, a USB cable icon appears on the screen, the gadget refuses to work and many do not know how to fix it and what to do in such a case. Let’s look at the main causes of this annoying error and how you can fix it.

Method 1. forced device reboot

One of the most common reasons is a software update. If you updated the phone’s firmware shortly before the problem appeared, then you should wait for the recovery and automatic reboot to finish, or resolve it forcibly. A hard reboot is used for this.

This method of “fixing” recovery mode differs depending on the model of the Apple device, but it will help in a situation where the iPhone is stuck on the strap.

For iPhone 8 and later, press and immediately release the Volume Up / Volume Down rocker, and then press the Home button. Hold it until you see the Apple logo.

For iPhone 7 Plus, simultaneously press the Power button and the volume down rocker, respectively, until the company logo appears. If iPhone 6 is stuck on a lanyard or another iPhone model, you must simultaneously hold down the Home and Power buttons. The drawing should disappear and then the iPhone wakes up.

Why is this happening?

The well-known rule says “the best defense is an attack” and, accordingly, at the beginning you should find out the cause of this problem. Why is iPhone stuck on iTunes lanyard in this mode? In addition to software updates, this can also be:

  • Software failure (installing new software solves the problem);
  • Broken processor;
  • Mechanical damage or after an impact (some part may have broken, which does not allow the iPhone to work);
  • The power microcircuit is out of order (after a shock or contact with moisture).

Every problem requires an individual solution.

Method 2. Fix iPhone Stuck on iTunes Lanyard Using iTunes

If method number 1 did not help you, the iPhone froze in recovery mode and you saw a notification that the phone needs to be restored through iTunes, then follow these instructions. This is an easy process, and first you need to connect your device to your computer and launch the program. The phone then has to start the treatment itself. If this does not happen, hold down Home and Power and hold until the iTunes icon appears on the device screen.

Then click “Update” and wait for the operation to finish. By choosing this function, you can save data to iPhone, but if you select “Restore”, then all information and phone settings will be lost forever.

Method 4. Tenorshare Reiboot

In some cases, the so-called Recovery Loop occurs, i.e. Recovery loop. This means that after any of the above recovery methods, the phone will continue to show a black screen and the same hated iTunes and cable icon to no avail. The reason lies in operating system update misses or iOS firmware recovery errors.

Fortunately, there are many effective programs available to treat this problem. To fix this with the Tenorshare ReiBoot utility, you need to perform a few easy manipulations in a couple of clicks. Now the question “iPhone stuck on iTunes what to do?” won’t seem so intimidating.

Connect your iPhone and go to the utility. Then select the free function “Exit Recovery Mode”.

If it still does not solve your problem, then select the “Fix the operating system (fix all iOS freezes)” option and click “Start”.

A recovery window will appear in front of you, on which you should select “Fix it now”. Reiboot will start downloading the firmware package and after the download is complete, click “Start OS Recovery”.

This process may take a little time, but it will help to revive your device if the iPhone is frozen in recovery mode and get rid of this problem.

You need to click the “Update” button, then the firmware download will start, and then its installation will start.

Important: you should first make sure that you are using the latest software version on your computer. You can find out how this is done in our article: “Updating the iTunes program”.

Then follow the instructions on the screen.

Possible problems

When updating the iPhone via iTunes, the user may encounter a number of problems. Let’s consider the options for fixing two of them. The first is related to the fact that the prompt for installation is not shown. The second failure prevents the smartphone from syncing with the PC.

Situation 1: You are not prompted to install

If the offer to update iPhone via iTunes does not appear automatically, you can start the procedure manually. To do this, go to the menu of the connected device in the program window. Click on the “Review” item. In the right window, activate the “Update” option.

How to Update iPhone via iTunes on Computer

Often, firmware updates on Apple mobile devices “over the air” are impossible for some reason. For example, the lack of Wi-Fi in the house, but there are other circumstances. In this case, it will be possible to install the latest firmware using a computer and a special program. Let’s figure out how to update iOS through iTunes.

Updating your smartphone via a computer

You can open the update window for a mobile device if you connect it to a computer and then activate iTunes. The program will automatically display a smartphone. If he does not have the latest iOS, then there will be a proposal to install the modern version.

How to sync iPhone with iTunes

When you sync iPhone with iTunes, you can transfer information from your phone to your PC, or vice versa. In addition, you can send each other music, pictures, movies, make backups and keep them in working order, restore individual information and all iOS if necessary. In this article, we’ll take a look at how to properly sync iPhone with iTunes.

To connect your phone to a PC and sync it using iTunes, you need a USB cable and perform some manipulations:

Launch iTunes and connect iPhone to PC. You will see the inscription “Do you want to allow this computer to access information (device name)”. Click “Continue” and perform some actions on the iPhone.

We unlock the iPhone and answer “Trust” to the question “Trust this computer?”. And then we enter the password.

Go to iTunes and authorize the PC. This is done in order to restore the “trust relationship” between devices, as well as to be able to use the information that is stored on them.

Open the “Account” block. It’s located at the top of the app. We successively press “Authorize” and “Authorize this computer”;

Enter your username and password from your Apple ID account and click “Login”;

See how many PCs are authorized under this account and click “OK”.

The process of recognizing the iTunes iPhone begins. A picture of a phone or tablet appears at the top. Click on the picture and select the desired item.

The transition to the Apple manual. the device can be done through the sidebar of the application. In the catalog “Devices” you will find its name.

By going to the desired section of iTunes, you can synchronize certain types of information, for example, music. There is a special tab for this. The steps are very simple. Just mark the desired item and click “Apply”. You can work with “Photos”, “Movies”, “TV Shows” in the same way.

In this case, we need to synchronize all the information. Therefore, we remain in the “Overview” catalog. This is where the backup will be created, and you can store it both in the cloud storage and on a PC.

A computer is more suitable for force majeure. when restoring an iPhone or when upgrading to a more modern model. In other cases, you can use an iCloud backup. You can create and restore it without using a PC.

Below the information backup block there is a section containing parameters for automatic synchronization. Here you need to note the first two parameters so that synchronization is performed every time you connect and to perform it over Wi-Fi.

Click “Synchronize” to start the process of information exchange.

Important. Today, iPhone Wi-Fi syncing is only possible if you have iOS 12 or lower.

The process can be monitored in a special area.

After syncing is complete (1), you can proceed to disconnect iPhone from PC via Safely Remove. To do this, click on the appropriate button (2) and remove the cable.

iTunes, while considered universal, has never been the benchmark. For example, Apple does not use it entirely in the macOS environment, but divides it into several components. And on Windows, iTunes gives errors and works intermittently. This also includes the issue of synchronization.

It cannot be performed for various reasons, and most often from. per:

malfunction of both a mobile device and a PC;

As you can see, it is easy to sync iPhone with iTunes, and problems that arise in the process of work are easily eliminated.

Fixing unknown error 3194 in iTunes when restoring iPhone

Owners of “apple” devices. iPhone (3gs, 4S, 5S) and iPad may be familiar with the unknown error 3194, which appears when updating iOS. It can also appear in iTunes when you try to restore the iPhone firmware. Despite the fact that this problem, in principle, is not critical and is solved quite simply, it can thoroughly fray the nerves of an inexperienced user. Why might error 3194 occur? The point is that iTunes cannot connect to the Apple update server and request the SHSH hash. The reason for this may be both an outdated version of iTunes, and a modified system hosts file, in which the address of the official Apple server was replaced with the Apple caching server.

There are several ways to solve the problem. If for some reason you do not want to change anything in the settings of your computer, no question. Just install the latest iTunes on your friends or family’s computer and update your iPhone’s firmware. If you want to eliminate the unknown error 3194 directly on your PC, then you need to do the following:

Remove iTunes, download the new version from here and install.

It is worth noting that most often this is where the problem is fixed. If the iTunes update did not help, go to method 2.

Editing the hosts file. Close iTunes and launch notepad with administrator rights:

In the “File” menu, select the “Open” item and go to the C: \ Windows \ System32 \ drivers \ etc \ folder. The hosts file lies there.

Note: If you do not have Windows, but Mac OS X, then you need to select the “Go to folder” item in the Finder in the “Go” menu and go to the / etc directory. There, using TextEdit, open the hosts file.

We find the line: “ gs.Apple.com” and delete it. We save and close the file. Launch iTunes again and try to update your iPhone or iPad. If you are restoring device firmware, you will need to put your iPhone into DFU mode. This is done by pressing the lock button for 3 seconds, then, while holding it, press the main button and hold both buttons for 10 seconds, after which we release only the lock button, and continue to hold the main button. The result should be like this:

In this case, iTunes should also display a window with a message that the connected device is in DFU mode. Click the “Restore iPhone” button:

Try to restore the firmware again.

If all else fails…. In this case, check if iTunes is blocked in the firewall or antivirus you are using, otherwise you will not be able to access the server until you remove it from the blocked ones. The second point. after the elimination of the unknown error 3194, new ones may appear. 14, 21, 1015, 1600, 4013, etc. In this case, you need to try to install the latest firmware from the Apple website.

Fixing unknown error 3194 in iTunes when restoring iPhone: 19 Комментарии и мнения владельцев

The information is helpful, thank you. It is also interesting that in the search engine this site is higher than the site “you-know-who”, which also has a similar infa)

“ gs.Apple.com” this line is missing

iTunes updated, deleted, reinstalled, checked hosts, still gives an error. tried on different computers. nothing helps

In the “File” menu, select the “Open” item and go to the C: \ Windows \ System32 \ drivers \ etc \ folder. The hosts file lies there.

And should. Perhaps you have it hidden and therefore not displayed.

Thank you so much! The first tip helped! It turns out it was necessary to update iTunes

Hello. I had a jailbreak installed on my iPad, I decided to erase everything from the iPad that I could not do, now my iPad is rebooting all the time and the apple is on fire. So I decided to try to restore through dfu and got out error 3194. Now I updated iTunes, and I’m downloading the update. question. when jailbreak will it work ?

updated iTunes but the downloaded iOS disappeared what to do?

Maybe you just need to download it again.

Hello, I did everything as you wrote, it still gives an error what to do?

Hello, I want to upgrade to iOS 8.4, I don’t know if this is possible or not? I do not want to use iOS 9. iPad is jailbroken

For those who do not have the Hosts file. Think a little. Sometimes, at least. Notepad automatically searches for.txt files, and hosts, if you have not touched anything before, “lies” as a regular file, which is not displayed if you search for.txt. At the bottom right when searching, change from.txt to All and everything will “lie”.

Hello. I had a jailbreak installed on my iPad, I decided to erase everything from the iPad that I could not do, now my iPad is rebooting all the time and the apple is on fire. So I decided to try to restore through dfu and got out error 3194. Now I’ve updated iTunes, and I’m downloading the update. question. Will it work with a jailbreak? ——————————————————————————————————————————————————————————————————————————— The same story, only with the iPhone 4, there was a jailbreak, dropped the content and settings. made a custom firmware through sn0wbreeze, through iTunes I upload, error 3194, in etc. host everything is clean, no Apple, even initially there was no.

Hello, can you help with iPhone error 3503

Can’t update iPhone. what to do and what to do?

Hello everyone! Most recently, I faced such a problem. my iPhone categorically refused to update to the new firmware version, both through iTunes and through iCloud. I just displayed the inscription. “Failed to install the software update. An error occurred while loading iOS. ” Although, in fact, the update was not only available, but already downloaded to the device. A riddle? Even some! But the “answer” was successfully found by me and now my iPhone is running the latest mobile axis.

And, of course, I could not help but share this joy and wrote detailed instructions on how to successfully solve the problems associated with installing new firmware versions on Apple devices. Wow, how bent! 🙂 Let’s go!

The first thing you should pay attention to is whether your device supports the version of the software that you are trying to install. For example, iOS 14 (as well as its modifications) can be “put” on:

  • iPad mini 4th generation, iPad Air 2nd generation, iPad 5th generation, iPad Pro and older.
  • iPhone 6S and all subsequent devices in Apple’s smartphone lineup.
  • iPod touch 7th generation.

Have you checked it? Does your technique fit this list? If the answer is yes, then we proceed as follows.

In the main menu, go to settings. basic. profile (at the very end of the list).

By the way, it was this method that helped me, for some reason it interfered with the update. “iOS beta Software Profile”. Apparently because I often install test firmware and get access to new functions before anyone else 🙂 Do you want it too? Read. How to Install iOS Betas.

After removing it, everything went “like clockwork” and took a fairly small amount of time (about 20 minutes).

In any case, here are a few more points that can prevent the installation of new software and it makes sense to pay close attention to them:

  • Check the charge level, it should be more than 50% or simply connected to the mains charger (Important! It is recommended to use the charger from the outlet!).
  • It may well happen that Apple’s servers are overloaded. this often happens on the days of presentations and the release of new versions of iOS. How to check their status at the moment. read here. In this case, it remains only to wait, usually not much (from 1 hour to a day).
  • A trivial thing. check if the Internet is functioning normally, if the connection is poor, the update process can take a long time.
  • In the case when the update cannot be performed directly from the device, then you can and should use iTunes for this operation. Make sure the version of the program is the latest (how to do it?). Almost always, when you connect your iPhone or iPad to your computer, iTunes itself will offer to install a new version of the software. If this does not happen, then we will install the update forcibly. To do this, we use this instruction for restoring the software (Attention! Create a backup copy so as not to lose all data).
  • Changing the USB port, Lighting cable, Wi-Fi hotspot, computer in the end can also help troubleshoot problems.

As you can see, there is nothing complicated. all the tips are quite simple and easy to do at home. But, at the same time, their implementation will almost 100% help to put the fresh version of the software on your iPhone. So we need to act!

Addition! Updating over Wi-Fi may be interfering with an inoperative fingerprint reader. Is the fingerprint sensor not functioning on your device for some reason? Installing a new firmware version is possible only through iTunes. And one more thing. if you are faced with the error “Unable to check for iOS update“, then this instruction will suit you. Wow, I don’t seem to have forgotten anything 🙂

After all the manipulations, the iPhone still does not want to be updated or does it get incomprehensible errors? Write in the Комментарии и мнения владельцев. we will figure it out together!

Updating iPhone with iTunes

Apple is one of the most progressive companies in the world and is constantly working to ensure that customers are as comfortable as possible with its products. An important point of this policy is to keep the iOS and Mac operating systems up to date. Updates usually optimize device performance, but may also contain new features or, for example, extend the battery life of the device.

In order to update the firmware (iOS) of your iPhone to the current version, you will need a computer with Internet access and iTunes installed, a USB cable and, of course, an iPhone.

PC connection

We connect the device to the computer using a cable and check the stability of the Internet. If the network is unstable, it is best to postpone the procedure, as network outages may prevent firmware updates or even result in data loss. It is worth noting that the iPhone must be officially jailbroken, otherwise after the iOS update via iTunes, it will stop receiving the cellular signal and, in fact, turn into an iPod.

Useful multimedia software for Mac from Movavi

Compatibility check

If the above conditions are met, we continue. On your computer, open iTunes and go to the “Overview” tab. The latest version of iTunes does not have such a tab, so in the upper left corner of the screen you need to select the phone icon and click on it. After a second, an information window will appear.

At the top of the screen, you will see the memory card capacity, the iPhone serial number and the current iOS version number. The same window contains information about the need to update the iPhone.

  • If the message looks like “iPhone software is up to date, iTunes will check for updates”, then the iPhone firmware version is up to date and no update is needed.
  • And if the message says “A newer version of iPhone software is available”, then you can safely update, although before starting the update via iTunes, we recommend that you make a backup copy of the data so that in case of unforeseen situations, you will not lose it (in the same window, click on button “Create a copy now”).

Day One Diary: How To Record Without Paying Developers

Error 4005 when restoring and updating iPhone

Most often, the owners of the iPhone 4S contact the service centers for the repair of smartphones, who complain about problems with the firmware. As a result, the irreplaceable gadget either does not turn on at all, or an error appears on the screen. Often, such breakdowns can lead to not the most pleasant consequences: the loss of all personal data or the complete failure of the phone (in this case, iPhone recovery is impossible).

There are many reasons for such troubles. It is possible that there was a download error or the user tried to install third-party software on the smartphone. Also, a fairly common cause of breakdown is a hardware malfunction, which can be caused by mechanical damage or moisture penetration into the iPhone 4S case.

However, this does not mean that in order to “reanimate” a smartphone, you need to spend money on expensive diagnostics. There is a chance to fix your phone yourself.

So, most often users are faced with an unknown error 4005. Let’s consider the probable reasons for the appearance of such an inscription and methods for solving the problem.

cable change

Replacing the USB wire has already been written about earlier. However, it is worth considering a few more features of the cable error. In some situations, the wire may simply be damaged. However, even Apple-certified cables may not work properly. Therefore, it is worth trying several different options before excluding such a cause of breakdown.

Problems connecting iPhone via USB

Error 4005 may be caused by a problem with the USB cable. This is also evidenced by codes 9, 13, 1600, 1643 and others. In this situation, the most logical solution would be to change the wire. If, however, reconnecting does not solve the problem, then it is necessary to check the settings of the antivirus programs, it is possible that they prohibit the connection of third-party cables. It is also recommended to restart the iPhone and disable the firewall and firewall for a while.

Synchronization problems

Quite often, error 4005 occurs while syncing iPhone, iTunes and computer. This is due to the fact that during the download of the data package, some of the necessary files are lost, and the software is not completely updated.

In this situation, there is no need to panic, since such a problem is considered the simplest one, which any user can cope with. The first thing to understand is that iTunes and iPhone were developed by the same company, respectively, such failures cannot lead to irreparable consequences in the form of a significant malfunction of the device. Don’t blame the developers either. IT technology is a collection of functions that need to be implemented in a tiny device. Therefore, such failures are quite normal costs. If there is error 4005 on the iPhone screen, then you can perform a few simple manipulations that will help restore iPhone without losing data.

How to Fix Error 4000 “The iPhone could not be updated. An unknown error occurred (4000).”


Before seeking qualified help, it is worth trying the simplest method of solving most problems. If an error occurs while synchronizing multiple devices, you need to restart both the iPhone itself and the PC. Typically, computers restart on their own, and the iPhone has to be turned off and on forcibly. To do this, you must simultaneously hold down the power button and the “Home” key and wait about 10-15 seconds. After this time, a sharp shutdown of the smartphone should occur. After that, you just need to wait until the device is fully loaded and check if the 4005 error has disappeared.

If the problem persists, then it’s time for more serious action.

IPhone Self-Update

So you, one of the owners of the coveted iPhone, use it with great pleasure, and the moment comes when you need to update iOS. The reasons why the update needs to be made are predictable: new functions and capabilities, bug fixes in the previous firmware version, an increase in the smartphone’s lifespan.

In addition, new applications in the AppStore no longer support the old firmware. All this puts you in front of the question: how to remove the old and install the new version of iOS? This article will teach you how to update your iPhone correctly and easily.

There are 2 ways to update your device. They differ from each other in that in one way you need to use only the iPhone, and in the other you need a computer. But in both cases, it is recommended that you back up your data on your computer or server to iCloud before updating.

If, suddenly, something goes wrong and the iPhone gives an error during or after the update, you can always restore your data and they will not be lost.

Method two (via computer)

How to install iOS using a computer. To do this, you need iTunes installed. You can download it from the official website Apple.com. Make sure it is the latest version. If the version is outdated, iTunes will need to be reinstalled.

  • We connect the iPhone via a cable, open iTunes. In a minute, the program will detect your device
  • Click on the phone icon. The main iPhone control menu opens. Click the “Update” button
  • We confirm the License Agreement and wait.

When the installation is complete, the device will reboot and be ready for use. This method is convenient to use when you are at home, the iPhone charge level may be below the cherished 50%.

Method one (via Wi-Fi)

How to update iPhone without a computer. You can update your device anywhere you have the Internet. The most important thing is to make sure that the battery charge is 50% or more. If the charge is less, then the iPhone will not want to update and will offer to connect the charger.

  • To update, go to “Settings”
  • Through the main menu, go to the “Basic” tab
  • Select the item “Software Update”
  • We are waiting for the iPhone to check for updates.
  • As soon as the update is found, click “Download and Install”
  • We read the agreement. If you agree with the rules, click “Accept”

After that, wait for the iPhone to download the update from the Apple server (30 minutes). Then the device will reboot and the installation of new software will begin. After 5-10 minutes, the smartphone will turn on and be completely ready for use.

Installing the firmware downloaded earlier

This procedure is also referred to by some as updating, although I would call it a rollback or firmware restore. Let’s see how this is implemented using a computer.

First of all, you must have a firmware file directly on your computer. This can be a saved file from the time of past updates or a file downloaded from one of the sites that are designed to store all firmware versions.

The procedure itself is similar to the previous one, you connect your iPhone to your computer and wait for iTunes to find your smartphone, click on the phone icon. Device control opens. Here, instead of the “Update” item, select the adjacent “Restore”.

Next, select the firmware file that was downloaded in advance, and start the process by clicking “Open”. You are waiting for the start of the installation, confirm your intention by accepting the license agreement. After 5-10 minutes, the smartphone will reboot and be fully ready for use.

Using the above methods, you can update any Apple device, be it iPhone 3g, 4, 4s, 5, 5c, 5s, 6 or 6Plus.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

Keep your Apple ID close at hand

When there is not enough space to download and other possible solutions to the problem do not help. We are trying to restore access to Apple ID. This ensures that you can use all of Apple’s services, such as the App Store, iCloud and others.

  • Go to your account page. Click on the “Forgot your password” mark.
  • On the next page, you need to click the same.
  • Enter your details and your email address. If the entered address does not match, then you can try with another mail.

Find your password

If a password is set on your phone and tablet for security purposes, then you should make sure that you remember it. Perhaps a password will be needed to successfully complete the procedure, especially with the latest firmware versions. If you forgot it, then you need to contact the service center for recovery.

What to do if iPhone can’t download new version of iOS

Many fans of Apple technology sooner or later face a problem when the iPhone is not updated and, as a result, it is not possible to install the current firmware version. over, the situation is the same in iCloud and iTunes. The standard message about failure and error just appears and nothing else. In this case, the download has already possibly been performed. Let’s try to figure out what exactly is the cause of such a malfunction and how it can be eliminated.

Many users are wondering what will happen if not updating the device at all. What is it all for, if the iPhone is working fine anyway. In fact, with each update, Apple developers make devices better, add more changes, new features and remove mistakes made in previous versions.

So the phone will be able to serve you much longer. In addition, many applications in the AppStore system are simply not able to work with the old firmware.

Update download error

Your device seems to see a new version of the firmware and has already started downloading. However, then an inscription appears. “Error downloading update”.

Why is this happening? There may be several options:

  • Not enough memory. In this case, free up some space on your phone and try updating again.
  • Unstable network connection. Make sure iPhone is connected to the internet. If everything is fine, then it might be worth connecting to another wi-fi network.
  • Another reason is the various technical jobs at Apple. It’s enough just to wait a while.

If you don’t want to wait, you can try downloading the firmware from third-party resources. But in this case, there is a high probability of catching viruses. Therefore, this is an extreme method.

If you nevertheless decide to install updates via PC, then first download them from the official site. After that, proceed to the installation:

  • Launch iTunes.
  • Go to the section of the updated gadget.
  • Click on Shift, click on “Update”.
  • In the explorer, select the required file with the extension.ipw.

Need more space to install the update

Lack of space sometimes causes the error. If there is not enough space to install or download an update, iOS will automatically try to free up space. However, by default, the system will only delete information from those utilities that will soon be loaded in automatic mode. All information in this case will not be deleted or moved. Can be removed using iTunes.

If you can’t connect to iTunes, try to free up as much space as possible for the installation. Remove unwanted photos and videos from your phone.

How else can you update iOS

Situations can often be pretty commonplace.

For example, the battery charge must be over 50%. If it is less, then you need to try to connect the gadget to the network.

There may also be a problem with the Touch ID fingerprint scanner not working. If for some reason it does not work, then it will be possible to update only using iTunes.

We install the new version of iTunes, connect with the original iPhone cable, and agree with the messages of the system.

The main reasons for the failure

Usually, when the iPhone 5s (or other models), refuses to automatically update via Wi-Fi or other communication channels. Users start to wonder why I can’t update my phone to the current version.

There are several simple solutions:

  • Just restart your iPhone. Turn off and then turn on again. This helps to solve most of the problems in the OS.
  • If this does not work as expected, then try reconnecting your internet connection.
  • If this did not help, then you can restore the entire system.

The most common causes of this problem include:

  • Update error.
  • Incompatibility.
  • Lack of space.
  • No access to the server.
  • Incomplete updates.

How to update iOS of iPhone using iTunes 2020

Condition 3. Sufficient free memory on the device

Any file downloaded to the phone, including the system update file, needs a certain amount of available memory. Therefore, to make the installation of the new OS version as easy as possible, it is best to first clean your iPhone from the accumulated unnecessary files. This can include the cache, unused applications, media files or documents, copies of which are available on other media, etc.

Condition 1. Adequate battery power in the phone

Before proceeding with any important operations using iPhone, make sure that the device has sufficient battery power. Otherwise, the phone may simply not have enough power to complete the system update operation, and it may turn off directly during this process. It is recommended to have a battery charge of at least 50-70%, and if you have the time and opportunity, it is better to completely charge your iPhone before installing iOS 14.

Condition 2. iPhone has a stable wireless network connection

Another important factor in a successful iOS update is a strong Wi-Fi signal and a stable connection to it. To check if the network status is causing the iPhone to not update, try using the same network on a different device, or connect iPhone to a different Wi-Fi network with a stronger signal. In addition, you can try updating iOS on iPhone a little later, when the network congestion becomes much less.

Condition 4. Closing all applications and restarting the devicec

Condition 4. Closing all applications and restarting the device

How to upgrade iPhone to iOS 14 using Tenorshare ReiBoot

  • On an accessible computer or laptop with an Internet connection, open any browser and then go to the official website of the Tenorshare developer.

Install ReiBoot on your computer and then launch this program. Now, with the original USB cable, connect your iPhone to your computer.

You will enter a new interface where you will need to click “Standard Repair” to enter the firmware download interface.

Next, in a new window, you will need to allow the program to download the firmware package to your PC to install the latest official version of iOS, in our case, iOS 14. To do this, click the “Download” button in the program window.

Note: Using the “View” button you can specify the folder for saving files on your PC. Using the “Copy” button, you can go to the web page with the required firmware file in order to download it manually. Using the “Select” button, you can specify the location of the firmware file on your PC in order to add it to the program.

When the required files have finished downloading, select the “Fix Now” option. The process will take very little time. In the meantime, the iPhone will automatically reboot and turn on with iOS 14 already installed on it.

How to update iOS 14 on iPhone using iTunes

  • If you have iTunes on your computer or laptop, make sure you have the latest version of the program installed or, if not, update it. If this program is not available, download it to your computer and install.
  • Launch iTunes and connect your iPhone to PC with original USB cable.
  • After iTunes detects your device, click on its icon in the program. Then go to the “Overview” tab.

Now, on the right side of the program window, click on the “Update” function.

  • When prompted for confirmation, select the Download and Update option. Wait a while until the installation process on your iPhone of the latest version of iOS is completed.
  • Checklist of the conditions for the successful installation of the update directly on the iPhone

    Sometimes simple yet extremely common errors prevent the successful installation of an update to the latest version of the operating system on an iPhone. To check if they caused the problem if iOS 14 is not being updated, and also to exclude similar situations in the future, we suggest that you familiarize yourself with a short checklist of conditions that users should complete before proceeding with the software update procedure on their devices.

    Why iPhone won’t update to iOS 14?

    The reasons for the failure to update the iOS version can be very diverse: insufficient amount of available memory on the phone, failures in the wireless network or congestion of Apple servers due to a massive iOS update, damage to the installation file itself, insufficient iPhone battery power, etc. In some cases, such a reason is easy to identify and eliminate, in others it may remain unclear, and for this you can use the solutions we proposed below.

    BYRGPUB.COM 2022