iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 keeps restarting on apple
For iPhone and iPad, after updating to iOS 11 and iOS 12, a problem arose, it often appears. it constantly reboots on an apple. Several situations can be distinguished: iPhone hangs on an apple and a blue screen; iPhone restarts on apple and red screen; iPhone hangs on an apple and restarts; iPhone does not turn on, lights up apple and turns off; iPhone does not turn on; Apple burns and restarts; iPhone does not turn on flashing apple, etc.
If you come across one of the above, you can fix them in the following ways.
Common way to solve reboot problem on apple is DFU Mode
We can restore the gadget when iTunes does not recognize your device. But with these methods, all data will be erased.
For iPhone 6S, SE and below, please do this:
First we connect the device to the computer, turn on iTunes.
Press the Home and Power buttons at the same time, hold for 12 seconds, then release the Power button, but continue to hold the Home button until the iPhone is detected in iTunes.
Next, press the “Recovery” button in the program and wait patiently while the iPhone reboots. If the above methods cannot solve the problem, try using Tenorshare ReiBoot.
For iPhone 7 and iPhone 7 Plus, please do this:
Press and hold the side button and volume down at the same time.
After 8 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.
In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.
For iPhone 8, iPhone 8 Plus, and iPhone X, please do this:
Press and quickly release the volume up button.
Press and quickly release the volume down button.
Press and hold the side button until the screen turns black, then press and hold the side button and volume down.
After 5 seconds, release the side button while continuing to hold the volume down button. If the Apple logo appears, the side button was held down for too long.
In DFU mode, there are no identification marks on the screen, the screen is completely black, iTunes will inform you that the device is in recovery mode. If your device displays a screen that says to connect your device to iTunes, repeat these steps.
If this method fails to fix the problem, try using Tenorshare ReiBoot.
What to do if apple is on on iPhone but won’t turn on
Do not worry, now we offer 2 ways to get out of the restart on an apple: enter the iPhone into DFU mode, or to the service center, the most effective method is Tenorshare ReiBoot.
Why iPhone X / 8/7 / SE / 6s / 6 / 5s / 5 hangs on the apple and turns off?
Everyone knows iPhone X / 8/7 / SE / 6s / 6/5 / 5s often have problems. Especially, when updating the firmware, it may not start, but show an apple, then either with one strip. What is causing this? Maybe the firmware is not compatible with your device. Or the problem is that the malfunction is caused by system crashes.
An efficient and fast way to solve the reboot problem on apple. Tenorshare ReiBoot
Click the button and download the Tenorshare ReiBoot software from the official website for free. Install the utility on your computer (there is support for Mac and Windows).
Before restoring, you need to put your phone into recovery mode to see the device. Press and hold the Home and Power buttons at the same time, and then release the buttons until the connection to iTunes appears on the screen. Connect your iPhone to your computer using a USB cable. Then run Tenorshare ReiBoot software on PC, it will automatically recognize your device.
Click on the active Fix Now button. And select “Next”, the firmware will load.
Note: Users should make a backup before getting started. Tenorshare ReiBoot does not theoretically bring any data loss, but Tenorshare recommends backing up beforehand to prevent accidents.
After downloading, click “Start Repair”. A system restore is in progress and your phone will then reboot. The device will be ready for use. And your problem will be solved.
If the solutions did not help, then you should contact the service center. After replacing the screen or battery, the device restarts.
Tenorshare ReiBoot provides all users with five ways to enter and exit “recovery mode” for free. This will definitely fix some of the problems they have.
With such a review, using the Tenorshare ReiBoot tool, you can solve not only this problem when the iPhone freezes in headphone mode, but also others that may arise after updating iOS 11. For example, if your iPhone turned into a brick after installing the new iOS 11, or freezes on a call (during an incoming call). There may also be a situation when the phone is frozen on the cord and the iTunes icon, a black or blue screen, the display does not respond to touch. You can download the Tenorshare ReiBoot program for free on the official website of the developers.
Why iPhone 5s restarts on its own?
There are often situations when the iPhone 5S constantly reboots, and spontaneously. There may be several reasons leading to iPhone restart: presence of Trojans and viruses, incorrect installation or incompatibility of installed software.
Why does iPhone X restart itself?
iPhone X is sealed, but the inside of the smartphone is still vulnerable to moisture. The tightness of the smartphone was broken after mechanical damage or opening; The device reboots after the Apple icon appears (reboots on an apple).
How to reset the operating system on iPhone?
To do this, follow these steps:
- Go to the device menu in the “Settings” “General” “Reset”.
- Click “Erase Content and Settings”.
- Enter your device password or Apple ID password to confirm.
What to do if the iPhone turns on and off by itself?
- make sure the battery is charged and not discharged anytime soon
- prepare your computer and USB cable
- sync iPhone to PC
- turn off your iPhone while holding down the Home button and the Power button.
- hold down the power button and wait for the iTunes application logo to appear on the screen.
Why iPhone 6 keeps restarting?
Typically, the iPhone will restart on its own for several reasons. If the car’s battery is unstable, or the car’s alternator is junk, fluctuations in the mains voltage can damage the phone in a few seconds and the iPhone 6 turns off.
Why iPhone 8 restarts on its own?
If your battery becomes unusable, iPhone may start to turn on and off by itself at regular intervals. The work of the power source can be lost due to the following actions: the iPhone was often charged from the iPad charger, frequent recharging of the phone in the car.
Why the iPhone does not turn on the apple is burning?
The main root cause of the problem, if an apple is on on the iPhone, the phone does not turn on, is a banal lack of energy for the smartphone, since the iPhone battery has a very low percentage of charge. In this case, after restarting the smartphone, it is quite possible to face such a situation.
Breakage symptoms
The main symptom causing the problem is that the iPhone restarts without stopping. In addition, the following factors may indicate a device failure:
- disconnection during calls;
- excessive heating during charging, in most cases the device heats up and reboots at the same time;
- inability to turn on the device;
- the appearance of a blue screen.
The specific symptomatology is directly related to what, in fact, the failure occurred. To solve each problem, it is recommended to carry out a full diagnostics of the device under service conditions.
Breakdown reasons
The main situations that cause the phone to reboot on an apple include power supply failures due to:
- by connecting your iPhone to an iPad charger,
- frequent power surges in the network charging the device,
- charging in the car.
In this case, the reason is the instability of the current level, which entails the failure of the battery and requires a complete replacement of the iPhone battery.
How to restart your iPhone if it’s frozen on the Apple logo — Apple Support
However, in addition to the instability of the current, the problem that the iPhone heats up and restarts can be provoked by:
- physical damage, including shocks and falls, while the battery may deform and lose contact with the phone;
- software crashes;
- failure of elements and components;
- moisture ingress and, as a result, corrosion;
- breakdown of the power amplifier and the inability to adjust the current inside the gadget.
iPhone reboots itself
Often, iPhone users complain that their device restarts every 3 minutes. This situation is not only annoying, but also prevents you from using the device at all. In this case, the need for a qualified and quick repair of equipment is obvious.
The best way to solve the problem with a phone that constantly reboots is to contact a professional service center. The masters of jobsservice.com.ua will diagnose the cause of such a situation as soon as possible and quickly fix the problems, giving you the opportunity to use a working device without constant reboots.
Trying to fix the problem with restarting iPhone
- First of all, it is recommended to install the available updates of the IOS operating system. perhaps this is what will help solve the problem.
- Next, we install updates for all applications. If the reboot occurs when the application is opened, then be sure to delete it and reinstall it.
- In addition, clearing the memory can help, which will increase the performance of the device.
Additional expert recommendations include:
- Forced reboot to enter recovery mode with a twenty-second hold on the home and start buttons;
- Performs a copy of all files by creating a backup and then a full reset of the operating system.
If none of the above helped. contact jobsservice.com.ua professionals to diagnose other problems.
We also recommend reading an additional article at the link below, which may help you determine the cause of the breakdown yourself:
Why does the iPhone restart itself. reasons and explanations
In this article, we will figure out why the iPhone X / 8/7/6/5 reboots itself, we will find the reasons and try to fix them.
Our site is not responsible for your actions. We recommend that you seek professional help from the service center for the repair of iPhones and other mobile equipment.
Example. On December 2, 2017, many iPhone owners began to reboot themselves. The reason for this is a bug in iOS 11.1.2: if any notification came from any application, then the phone went into reboot. Apple promptly released update 11.2 that fixed the problem.
iPhone restarts itself due to software error or crash
Modern applications, especially unofficial publishers, can cause devices to malfunction. It is not difficult to identify the “culprit” of the breakdown. To do this, view the event log in the smartphone.
Application malfunction reports are available in general settings (usage and diagnostics information). If unstable work persists after installing a specific product, then the problem area has been calculated. Note that the emergency shutdown record is always after fixing the activation of a certain function or installing an application.
Periodic shell updates can also play a cruel joke on the smartphone user. Incorrectly executed firmware. installing the current operating system in the device’s memory. leads to spontaneous shutdown. It is recommended to make sure that the operating system is installed correctly, and also check its compliance with the technical capabilities of a particular iPhone model.
If the software or the operating system of the model itself is not the reason for the shutdown, then the breakdown lies in the hardware of the smartphone. In this case, you need to contact the service center specialists to fix it.
Hardware failure. iPhone restart reason
The battery is often the weakest link in the iPhone. The battery can simply lose contact, which is quite enough to disrupt stable operation. Please note that over time, any iPhone gives “backlash”. small gap between the fixing elements of the device cover.
The battery may simply be worn out and not able to withstand the load. Naturally, if the battery has lost its capacity, the smartphone will turn off. Remember that a full charge of the battery is only 400 cycles. After reaching such a limit, the capacity of such an important component will steadily fall. In addition, a voltage drop directly during charging can cause breakage of the battery contacts.
Malfunction of the smartphone board, which usually manifests itself after intense shaking or strong impact. Such a “breakdown” in the electrical signal transmission circuit leads to the shutdown of the apparatus when its position changes abruptly. At the same time, such a problem often leads to breakdown of other iPhone components.
Failure of the smartphone processor leads to the impossibility of its full use. It is not uncommon for the iPhone to turn off during the startup phase. “Freezing” occurs at the stage of displaying the splash screen. Usually, malfunctions, as well as a complete burnout of the central processor, are restored by replacing the component.
Malfunction of one of the signal power amplifiers. Modern devices contain several types of amplifiers. In this case, incorrect operation or breakdown of one of the elements leads to disturbances in the distribution of voltage in the smartphone. Such fluctuations cause the device to turn off.
The electronics of the device will eventually be destroyed by moisture trapped inside the case. Water causes oxidation of materials and leads to inevitable damage to connectors, contacts and iPhone components. Therefore, a strong wetting of the device, for example, due to heavy climatic precipitation, or a direct hit of the device into a liquid is considered one of the main reasons for the subsequent malfunction.
If the iPhone spontaneously restarts, it is recommended to entrust the device to professional engineers. Remember. independent attempts to restore its work often lead to breakdown of other small units and an increase in the cost of repair.
IMPORTANT.
If you choose “Update iPhone”, then all personal information will be SAVED on it. But updating the iPhone that hangs on the apple is not always possible. Sometimes you have to perform “Restore iPhone” which leads to the complete destruction of all information on the iPhone. You can only recover deleted information if you have backed up iPhone before.
If an error appears during the recovery or update process, we recommend contacting one of our service centers. Where comprehensive and always free diagnostics of your iPhone will be carried out. As soon as possible, we will establish the true problem and determine the best ways to solve it by agreeing on the timing and cost of repairs with you.
Self-service iPhone recovery via iTunes
“Hard” rebooting different iPhone models
First, try to force restart your smartphone. As a result, all non-critical errors will be fixed, the cache memory of the device will be cleared and your smartphone should boot normally. You can see how this is done on different iPhone models in the picture above or you can read in our article on this topic.
If the reboot does not help and the smartphone still hangs on the apple, you need to go to more radical methods. flashing the iPhone. Follow the instructions below exactly and you will probably be able to independently get the iPhone out of the state when it hangs on an apple or constantly reboots.
- To get started, download and install the latest version of iTunes on your computer.
- After that, use the cable to connect the iPhone that “hangs” on the apple. It should be automatically detected by the system and iTunes.
- Then follow the instructions and prompts of the iTunes program to “Update” or “Restore” iPhone. iTunes will independently select and download the latest firmware version for your iPhone model and install it.
iPhone hangs on the logo: causes and solutions
And so, if you are faced with a problem when your iPhone does not boot, hangs on an apple or asks to connect it to iTunes. firstly, do not panic. The problem is solvable in 90% of cases and is quite simple. You may even be able to restore the phone to work on your own.
First of all, pay attention to what preceded the iPhone freezing on the apple and no longer turning on. Perhaps the phone was being updated, perhaps it was dropped on the floor or liquid got on it. All of these can affect the performance of your iPhone and lead to the problems described above.
The main reasons for iPhone freezing on an apple:
- “Crooked” installed firmware;
- Installed custom firmware. jailbreak;
- Defective iPhone battery;
- Failure of some of the elements of the motherboard: flash memory, processor, modem.
Almost all of these problems are solvable and repairable, except for the processor blade. It cannot be replaced with a new one and is very difficult to reball. In this case, it will be quite problematic to repair a smartphone. In other cases, when the problem concerns software, restarting the device or flashing the iPhone almost always helps. If the problem concerns hardware, then you will probably have to seek help from a service center, for example, fixlab.com.ua, which specializes in complex repairs of motherboards for smartphones, tablets and laptops.
DFU mode on iPhone and iPad
If the computer does not see the connected iPhone, you need to put it into a special Device Firmware Update mode or DFU mode. This is a special mode for updating and restoring firmware on Apple devices when standard methods do not help. It’s easy enough to enable Forced Recovery, but the process is slightly different on different iPhone models. How to enable DFU-mode on your device can be found on the official Apple technical support website.
If you did everything correctly, iTunes will automatically recognize the iPhone in recovery mode and a special notification will appear on the screen.
iTunes detects iPhone in DFU mode
Then follow the instructions on your computer screen. The process is very similar to the regular firmware described above.
IPhone Motherboard Repair
If none of the above methods helped you, then the problem is clearly deeper than a software failure and you need to contact a specialist for qualified iPhone repair in Kiev.
IN service center FixLab on Demeevka you are always waiting for a polite and competent staff who will fully advise you on the repair of your Apple smartphone. Thanks to our experience and the availability of modern equipment and a large warehouse of spare parts, we carry out 70% of repairs on the same day.
You can read reviews about our work on Google maps or on social networks. Regarding the repair of iPhones that freeze when loading and which are not helped by flashing, then often the case lies in the broken contact between the motherboard and the elements installed on it, usually flash memory or a modem. As a result of falls or other mechanical influences, the factory soldering may be broken, and there may be no contact in the right places. This leads to the fact that the system cannot boot to the end.
FixLab service center engineers are competent enough to identify and fix most of the malfunctions in your smartphones and tablets. For example, in the case of a “dump” flash memory, we will reball a flash on an iPhone in just one working day. And in a day, a fully working and serviceable smartphone will be in your hands!
What to do if iPhone keeps restarting by itself
Even if you use Apple’s equipment, this does not give a full guarantee of its stable operation. Unfortunately, any technical device can break or malfunction, including popular iPhones. And one of the most common problems is the spontaneous restart of the iPhone, although the user did not perform any action for this. And if you are faced with a similar situation, we advise you to carefully read this instruction, because in it we have collected almost all the main reasons due to which such problems may arise, as well as ways to solve them.
Removing previously installed applications
Remember the last time you did on your iPhone when it was stable? If you’ve installed any app from the App Store, we recommend uninstalling it. You just need to analyze your recent actions in order to pinpoint the source of the problem. To uninstall the program, you need to do just a few clicks: find it on the iPhone desktop, click on it and hold it for a few seconds until a cross appears, and click on it to confirm the deletion.
If you have installed several programs at once, uninstall all. You can download them again at any time, even if you don’t remember the names. They appear in your Apple ID account under “Purchases”.
There is also a separate item in the iOS settings, thanks to which you can understand which programs can cause problems.
- To do this, go to the “Settings” of your iPhone, then to the section “Privacy”. “Analysis” and “Data Analysis”;
- At this point, there will be different entries with diagnostic information. You need to scroll through it and see which applications have been mentioned several times lately;
- If there are any, then you need to try to remove or update them in the first place in order to exclude this item from possible causes. In some cases, it is this option that helps restore the performance of the device.
Battery wear
The battery capacity on the iPhone is constantly wearing down, especially when actively using the device. After about 2-3 years, the battery capacity decreases by 20-30%, and in some cases by 50%, if the device was charged very often. As a result, this affects not only the battery life, but also random reboots. We recommend that you check how much battery capacity you currently have. Starting with iOS 11, this can be done right in the iPhone settings:
- Go to “Settings” and click on the item “Battery”;
- Here find the “Battery Status” tab and click on it;
- A tab will open in front of you, where “Maximum capacity” will be written. The values are indicated in percent and mean how much the battery is from the original;
- For example, the default battery is 100% capacity. If it is indicated that there is 90% left, then you have already lost 10%. That is, by fully charging the smartphone, it holds 10% less charge than the default when it was purchased;
- If it shows values below 70-80%, you need to replace the battery.
For users who have an iOS version below 11, it is recommended to either update the operating system or download a third-party application to check battery wear, for example, AIDA or other similar utilities.
Recovery through third-party programs
Even if you are unable to restore the gadget to work using standard iTunes tools, you can use third-party utilities. Often they cope with their task many times better than regular means. For example, the Tenorshare ReiBoot program is excellent for this, which is constantly supported by the developers of this company.
Removing the SIM card
Another point that can affect the device reboot is improper installation of the SIM card, incorrect detection of it, constant search for the network. All you need to do is remove the SIM and try to work with the iPhone without it or install another one. This method solves the problem only in a small percentage of cases, but you should not exclude it.
Temperature changes
Any device can work only under certain weather conditions, including temperature. If you are in a place that is too hot or cold, your device may reboot. For example, in the cold, the iPhone will turn off altogether, and in the hot time of the day it simply overheats.
IPhone Restart Reasons
In most cases, these will be software failures associated with smartphone firmware, applications, optimization, however, there may be mechanical damage, which we also described in the corresponding menu items.
Why is my iPhone stuck during the boot process ?
Understanding the cause of the problem means that it can be avoided in the future. Here are the most common causes of iPhone freezing on the loading indicator:
Your device may malfunction as a result of the unstable version of iOS you are using. If the iPhone freezes when booting immediately after updating the iOS system, then the reason most likely lies in it.
Hardware problems
There might be a technical problem. If your device has been exposed to water or any component of the equipment has been damaged, its performance can be seriously impaired, which leads to various problems, for example, the device freezes during the boot process.
Malware attack
Probably the most common cause is a virus attack. Malware and viruses can affect the settings of your device and provoke this and many other problems.
Problems in boot settings
Errors in iPhone boot settings can also prevent iPhone from working properly and cause this problem.
Using recovery mode
If rebooting doesn’t help, you can try restoring your iPhone in recovery mode. Attention! All device data and settings will be erased. Follow the steps below to put iPhone into recovery mode.
Launch iTunes on your PC, and then connect one end of the USB cable to your computer.
Press and hold the Volume Up / Down button (Home button for iPhone 6 and later) for a few seconds. Without releasing the button, connect the other end of the cable to your device.
Release the button, then the iTunes icon will appear on the iPhone screen.
iTunes will automatically detect your device in recovery mode. Click “OK” to start the process. Check if the problem is resolved.
What to do if iPhone stuck on black screen while loading
Whatever provoked this error, the main task is to eliminate it; otherwise, you would not be reading our article now. Well, you’re in luck. One of the ways, or maybe all of the following, will return your device to working condition.
Restore iPhone in DFU Mode
If the recovery mode option didn’t work, you may need to put your iPhone into DFU mode. To do this, follow the instructions.
- Connect your iPhone to PC and launch iTunes.
- Press and hold the Power button and the Home button (iPhone 6s and earlier) or the Volume Down button (iPhone 7) on iPhone at the same time for about 8 seconds.
- After 8 seconds, release the power button while continuing to hold the Home button or Volume Down button until the message “iTunes has detected an iPhone in recovery mode” appears.
- Release the Home button or the volume down button, after which the screen of your iPhone should turn completely black. If this does not happen, repeat the whole process again.
For iPhone 8, 8 Plus and X, press and quickly release the volume up button, then press and hold the side button until the screen goes black.
Fix iPhone Stuck on Loading Screen without Data Loss
If you are looking for the best solution to fix this problem without losing your phone data, we recommend Tenorshare ReiBoot. This utility will help you fix any iOS crashes on your device, including freezing during iPhone loading, freezing at the Apple logo, recovery mode, black screen. endless download mode and other iOS problems. To correct your device using Tenorshare ReiBoot, download and install it on your PC, then follow the instructions.
Open the ReiBoot software and then connect your iPhone to your computer using a USB cable. The program will immediately detect your device. Select the “Fix operating system” option in the Main Menu.
Click on “Start” and download the required firmware package to your device. Click on “Download” to start the process.
IPhone repair at a service center
If none of the above solutions helped you get rid of the stuck iPhone loading indicator, you should contact an Apple service center. If the device is still under warranty, the repair will cost you free of charge. To avoid long queues, make an appointment by phone in advance to hand over the device for repair.
Restart iPhone
Rebooting the device is the simplest and, at the same time, quite effective way to fix any error. Therefore, it is better to start with her. Below are the restart methods for different iPhone models.
For iPhone X / XR / XS / 8/8 Plus: Press and release first the volume up button, then the volume down button, and then press and hold the side button until the Apple logo appears.
For iPhone 7/7 Plus: Simultaneously press and hold the Volume Down and Power buttons until the device restarts.
For iPhone 6 / 6s and earlier, iPad: Press and hold the Home and Power buttons until you see the Apple logo.
What to do if iPhone stuck on apple and won’t turn on
Is your iPhone stuck on an apple and you don’t know what to do? We have prepared instructions to help you get out of this unpleasant situation.
A white / black screen and an apple with a constant reboot is probably one of the most frightening pictures for an iPhone owner. Although, if you understand and know how to act in this situation, then you will understand that everything is not as bad as it seems.
Follow our instructions and you will undoubtedly be able to fix the problem with the frozen apple on the screen of your device.
Method 2 Enter iPhone Recovery Mode
IPhone recovery mode involves resuming the firmware of the device. All procedures are done using iTunes.
Here’s how to use recovery mode:
- To get started, you need a PC with iTunes installed and a USB-A to Lightning or USB-C to Lightning cable.
- Connect your iPhone to PC.
- Open iTunes on PC.
- Press and hold the Home and Power buttons at the same time.
- Keep holding the buttons even after the recovery menu appears.
- Release buttons, connect iPhone to iTunes / Finder.
- Hold down the power and volume down button.
- Keep pressed until the recovery screen appears.
- Connect to iTunes / Finder for recovery.
For iPhone 8 and later:
- Press the Volume Up key for a few seconds.
- Repeat with Volume Down.
- Then pinch and hold Power.
- Release when your iPhone connects to iTunes.
- You should see the following message: “The iPhone has a problem that needs updating or repairing.”.
- After that, click “Restore” and wait for the download.
Method 1 Force reboot
- Hold down the Home button and keep it pressed for 10 seconds
- After the screen goes out, press the Power button again until the Apple logo lights up.
- The phone will restart on its own and the logo will disappear if there was no serious system damage on the device.
For iPhone with TouchID (iPhone 7 to iPhone 8)
- Press on Power and volume button.
- Everything goes out, the Apple logo appears again.
- Then turn on the device again.
For iPhone with FaceID (and iPhone SE (2020)):
- Click on the Volume up button.
- Then press the volume down button.
- After that, hold down Power for 10 seconds.
- iPhone should restart.
Please note that you will need to enter your device PIN to continue using it.
What to do if iPhone is frozen on apple
But, if you’ve screwed up a bit, there is still a safe chance to bring your iPhone back to life without going to a service center. Read about it below.
IPhone hardware problems
Let’s start with the unpleasant. If your iPhone was prone to drops, shocks, contact with water or poor-quality repairs, after which, in fact, a problem appeared in the form of a permanent apple on the screen. you need to contact a service center.
The cause of the breakdown may be a faulty / outgoing cable, damage to the iPhone processor or its other components. Apple iLab Service Center Wizard will help you fix such problems.
Method 3 Enter DFU mode
Using this method will delete all information from the iPhone. If you’ve already created backups, you can download them later from iCloud.
DFU or device firmware update allows you to connect to iTunes and bypass automatic updates. This allows you to change the iPhone firmware to any version.
We wrote about this method for iPhone X / XS / 11 earlier. Using this mode, you can restore the firmware of the device.
How to enter DFU mode on iPhone with TouchID (physical button):
- Connect your iPhone to PC with iTunes.
- Press and hold the Home and Power buttons at the same time. You need to hold for ten seconds.
- Then stop holding Power.
- Keep the Home button pressed for another 10 seconds.
- If your screen is blank, your iPhone is in DFU mode.
- Now, when you launch iTunes, you should receive the following message: “iPhone has detected iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes “.
- You can restore your phone to factory settings or upload a backup.
To exit this state: you need to hold down Home and the power button.
How to enter DFU mode on iPhone with TouchID (touch button. From iPhone 7/7 Plus):
- Connect your iPhone to PC with iTunes.
- Press and hold the Volume Down and Power buttons at the same time. You need to hold for ten seconds.
- Then stop holding Power.
- Keep the Volume Down button pressed for another 10 seconds.
- If your screen is completely blank, your iPhone is in DFU mode.
To get out of this state: you need to hold down Power and Volume Down.
- Connect your iPhone to PC with iTunes.
- Hold down the Volume UP button for a few seconds. Letting go.
- Then press the volume down button. Letting go.
- Then click on Power until the screen goes out.
- When the screen goes out completely, press the volume down button again.
- We hold until the screen turns off completely and this will mean that your phone is in DFU mode.
The Apple logo should not be in DFU mode! If it appears, then you did something wrong. Repeat your steps one more time.
You can get out of this state if: press Volume Down and Power.
Hypothermia or overheating
With hypothermia or overheating of the iPhone, sometimes, but still there are cases that the device freezes on an apple and refuses to boot.
In this case, you need to give the iPhone time to “recover”. The main thing for the device is to provide it with a place at room temperature, away from open sunlight or freezing temperatures.
But we do not recommend trying to warm or cool the iPhone using aids.
iPhone is frozen on an apple. Why is this happening?
If your iPhone stuck on an apple and won’t turn on after an iOS update, the reasons for this could be a software error or system failure, or a hardware malfunction of the phone. In order to talk about possible options for action in a particular case, we will consider them in more detail.
iPhone won’t turn on due to software glitch
If you tried to update your iPhone, and it freezes on the apple and does not turn on, most likely this is a consequence of a system error. In this case, iOS cannot boot, and the iPhone reboots to the Apple logo cyclically. Most often this happens due to an incorrect completion of the update installation. If the phone had little free space, or there was not enough battery power when installing an update, the likelihood of this outcome will be much higher.
iPhone won’t turn on due to hardware failure
Symptoms and appearance can be difficult to distinguish between iPhone failure caused by software bugs while updating iOS from the consequences of hardware problems with the phone. The fact is that during the update process, almost all key components of the iPhone are checked. If something does not work, then when the firmware is updated, the phone may either not turn on at all, or freeze on an eternal reboot.
If the iPhone stuck on an apple and turns on only when connected to a charger and immediately turns off after disconnecting, the cause of this is most often a battery malfunction. Also, in such cases, there are often problems with the operation of the power circuit: damage to the battery connector on the board, incorrect operation of the charge microcircuit or breaks in the power supply of the board components.
complex cases include problems with the power or overall performance of the NAND memory chip, due to which the iPhone cannot boot and reboots cyclically. And, probably, the most serious thing that can be. “blade” of the central processor of the device. Unfortunately, the percentage of successful repairs with a guarantee of stable operation in such cases is extremely small.
What to do if iPhone stuck on apple and won’t turn on
With each new version of the software for the iPhone, the security of the operating system and the stability of its work increase. The process of updating the iPhone operating system is simple. you can install the latest version directly on the phone itself through the built-in update system via Wi-Fi. Despite this, many owners of Apple smartphones are faced with a problem when, after an iOS update, the device does not boot (iPhone hangs on an apple). Why is this happening, how can the problem be solved and how to avoid it. in this article we will take a closer look at this issue.
iPhone is frozen on an apple. What to do?
The most correct solution, if your iPhone is frozen on an apple and does not turn on, is to contact the service center in a timely manner. This can be especially relevant and critical in cases where the information in the device’s memory is extremely important. If the problem is of a programmatic nature, the specialists of our service center will be able to solve it quickly and efficiently. If, nevertheless, the problem is more serious, after carrying out technical diagnostics, we will be able to accurately determine its causes and offer a solution.
Are you facing a problem and your iPhone is frozen on an apple? Have questions? Welcome to the comments below. Tell us (preferably as detailed as possible) about the malfunction of your phone, indicate the exact model and firmware version of the device and get a preliminary consultation from the service center staff absolutely free!