How to fix the iPhone continues to restart the problem

Apple constantly releases updates to enter new features and correct errors. But sometimes the update process also brings some problems to users.

Many iOS users complain that iPhone 6 continues to restart after installing iOS

Perhaps it will be difficult for you to solve the problem with the iPhone. In some cases, you need to go to Apple Store and ask for help from technical support.

In fact, you can try to fix the iPhone continues to reboot the release yourself with a suitable guide. In this post, some effective solutions for rebooting the iPhone will be listed, step by step.

Forced restart to fix iPhone hang on Apple logo

If your iPhone has no other problems, you can independently eliminate the iPhone jam on the Apple logo loop. It will not delete the contents and settings of the iOS after restarting. over, the forced restart of the iPhone is a powerful solution to eliminate most errors.

  • Fix the jam iphone 12/11 / xs / xr / x / 8/8 plus on the Apple logo by compulsory restarting the volume button and then quickly release it. Press the volume button, and then quickly release it. Later, hold and press the side button until Apple‘s logo appears.
  • Decide iPhone 7 or iPhone 7 plus, stuck on the Apple logo, forced rebooting pressing the side buttons and the volume buttons for at least 10 seconds do not release them until you see the Apple logo.
  • Forced restart iPhone 6 and earlier iOS models stuck on Apple logo.Press and hold the “Home” button and the top (or side) button about 10 seconds until the Apple logo appears.

Device does not start after restart

If, after the procedure forced reboot, your iPhone 8, iPhone 8 Plus or iPhone X still does not turn on, it could be discharged. Yes, you did not even notice this.

In this case, connect the device to wired charging (it is preferable) or put on a wireless station and leave for a watch. After a couple of minutes it will appear:

If the charging screen does not appear within an hour or displays the need to connect to the power source, do not despair. Just check the connector, USB cable and power adapter.

First make sure that all 100% is that all connectors are securely connected, do not have damage and not clogged with mud. Try another cable or power adapter. If deaf. in service.

Note that in winter the battery can be greatly discharged due to low temperatures. over, it may not give the necessary power, and the device will simply turn off.

Of course, everything written above is true for iPhone 7 and below. There are simply no nuances besides the lack of support for wireless charging in this case.

Causes of enlightenment of smartphone

If your iPhone is hung on an apple, it means that there has been a software failure. There may be two reasons for this: in the first case, such a situation is observed after flashing software through Wi-Fi, however, according to developers, this problem has been fixed in new IOS versions.

Another common cause of the iPhone hanging on the apple is the installation of unsuitable from unverified sources. IPhones are designed only for legal software that can be downloaded via iTunes, any attempts to install “pirated” firmware can lead to malfunctions.

Similarly, the iPhone does not perceive illegal programs. Their installation immediately causes a software failure. In addition, such programs may contain viruses that cause problems in the system, so it is better not to risk and upload only official applications created specifically for Apple gadgets. In addition, it is worth considering that in some cases the problems of this kind may be caused by the failure of the processor, Flash chip or printed circuit board. in this situation it will be necessary to replace the spare parts. In most cases, if the iPhone hung on the apple, it helps the complete flashing of the device software. to make it best in service. Since independent actions can aggravate the situation.

Why not turn on iPhone: put the diagnosis

Externally, similar symptoms may be a consequence of completely different faults. The correct diagnosis is 90% success, so below we will analyze the possible breakdown options in detail.

Not turning on

The device cannot turn on, and there are several reasons for this:

  • Battery in deep discharge. The device cannot start with an uncharged battery and cannot be charged either, since because of the deep discharge it is blocked by the controller.
  • The battery failed. The battery is designed for about 500 cycles charge-discharge. If you actively use the device and charge it every day. in less than two years the battery will become inoperable. In practice, this is happening even faster.

iPhone does not turn on, burning “apple” and goes out

A white “apple” is lit on the screen or continuously, before the battery is discharged, or the device is cyclically overloaded every few minutes. This can happen for the following reasons:

    The swollen battery deforms the device fee. This malfunction is more characteristic of the third generation iPhone, where the battery is set between the “trough”. the bottom of the case and the motherboard. The deformation of the board leads to a violation of contacts and as a result of the device “hanging” on the screensaver. After replacing the battery to the new normal operation of the device can recover, and maybe not. If we get lucky.

What to do if the iPhone hung on the apple

Recently, the long-awaited update of iOS 13. we talked about its main chips in a separate article. Sometimes the upgrade carries not only cool functions, but also a bunch of bugs. Sometimes the update installation leads to the fact that the smartphone freezes on the download screen and do not want to turn on. Also such a problem may occur after the device is rebooted. Sometimes iPhone freezes when connected to PC or unsuccessful Jailbreak. what it is, read here.

Less often the problem occurs due to the hardware. as a rule, after unsuccessful or independent repair. To prevent such a sad outcome, we advise you to use only Apple authorized service centers only.

Fortunately, in many cases, everything is easy to repair yourself without referring to the service. We will tell you several proven ways that will help to reanimate the iPhone, which turns on to the apple and turns off.

Hard reboot when the iPhone does not turn on and burns apple

Turn off and turn on again. this method helps in most cases not only when IPhone breakdown, but also with PC, routers and mobile gadgets. The startup process Hard Reset depends on the model of your iPhone.

How to forcibly restart the iPhone with the “Home” button

Old iPhone models are still equipped with the Home button. these are all devices from the first iPhone, published before iPhone X. The most popular of them: iPhone SE, iPhone 5 / 5S, iPhone 6 / 6S / 6 Plus / 6s Plus, iPhone 7/7 Plus, iPhone 8/8 Plus.

  • If you have a sixth iPhone or a model older, it is necessary to hold the “Home” button to reboot and the power key is about 10 seconds until the apple icon disappears from the screen. Also he should not flash.
  • If you have an iPhone 7 or older, simultaneously press the volume and power reduction buttons and hold them until the white logo of the manufacturer disappears.

During the reboot, the phone will restore all disturbed processes and starts normally. Remember that after that you need to enter a password from your Apple ID account.

How to make a hard reset on the iPhone without a button

There is no button home on new iPhones. Namely. on the iPhone X, iPhone XS / XS Max, iPhone XR, iPhone 11/11 Pro / 11 Pro Max. But for them you can conduct a forced reboot if the iPhone does not turn on, and the apple is lit.

The process is a bit more complicated than for old models.

  • Click on the volume button and release it.
  • Also press the volume key.
  • Hold the power button and hold it until the screen is walked (the Apple logo will disappear), and the device will start a reboot.

We use Recovery Mode if the iPhone does not turn on

In order not to lose information on the iPhone, you can try to use the recovery mode. it is Recovery. This method will be the most effective if the problem arose after unsuccessful system update. Smartphone reinstalls iOS without erasing your personal data.

  • Connect the iPhone to the computer using the Lighting wire.
  • If you have iPhone 7 and older, press the power button simultaneously and reduce the volume. If an older iPhone model. HOME and inclusion key.
  • Wait for notifications that the smartphone is translated into recovery mode, and follow the tips on the PC screen.

Recovery via DFU mode

In case, if your iPhone does not turn on, the apple is lit and goes out when rebooting. there is a special firmware update mode, it is the DFU mode (Device Firmware Update). With it there is a compulsory system rollback, error diagnostics and emergency device update.

If you did not help the option with reboot and restoration, then DFU will become a kind of “plan b”. We still do not recommend starting with him. try first Hard Reset and Recovery, and already if nothing works, go to recovery through DFU.

DFU mode works mainly on old iPhones. Here’s how to turn it on.

  • Connect the iPhone to PC using iTunes.
  • Simultaneously press the power buttons and “home” as when rebooting and hold them ten seconds.
  • Release the POWER key, but keep home while iTunes will not have a message about the introduction of a smartphone to DFU mode.
  • Follow the on-screen guidelines to reset the iPhone settings.

Unlike Recovery mode, DFA works with a shut off, on which no icons are displayed. While updating the firmware from the iPhone, all data will be deleted: you will have to re-specify your Apple ID and configure iOS settings. To not lose important files when resetting the device, save them in advance in the cloud. For more information about backup, we wrote in a separate article.

Contact your service

If the Tips described above did not help you, it is possible that everything is in the hardware. Recently cleaned iPhone in doubtful service? Or, maybe they tried to replace something inside the device themselves, and after repair, extra details remained?

If you bought a gadget recently, you can contact Apple support and use the warranty. If the device has been for more than a year, you should find a reliable service center and show the device to specialists. Read more about repairing iPhone. on the official page of the manufacturer.

Water entering

Water, along with dust. Chief Enemy Digital Technology. When moisture gets inside the gadget, the device stops working correctly. It can manifest itself that the iPhone turns off by itself and turns on only with charging. So as not to ruin the device fully apply to the service center, where the iron is dried. Independently get rid of moisture inside the smartphone is not recommended.

If your iPhone behaves strange: it turns off by itself, even with the remaining charge of 15% or 30%, then you should know that this is not news and you are not the only one who collided with a similar problem. Users reported this issue everywhere from the date of IOS 9. And even now, in 2016, many of them come across this problem. If your iPhone is suddenly turned off, even if there is a sufficient charge in the battery, try the following recommendations for troubleshooting the problem:

iphone, apple, solve, constant

Fix the infinite download loop by recovery in recovery mode

If a rigid reboot does not help, try moving the iPhone to recovery mode and restore the device in iTunes.

You can exit the reboot cycle after the restoration of iTunes. Here are the steps to enter the recovery mode:

Step 1 Connect the iPhone to a computer and open iTunes if it does not open automatically.

Step 2 iPhone 6 and earlier users, please hold the power and main buttons for at least ten seconds and hold them until you see the Apple logo until you see connect to iTunes Displaying the screen on your iPhone screen. If you are using iPhone 7 or 7 Plus, instead, press the volume button. For iPhone 8 and later versions, you should click and release the volume button, and then the speed reduction button.

Step 3 Now your iPhone is in recovery mode. You will see a pop-up message in iTunes asking you to restore or update, select Restore, it will erase all your contents and settings on the phone. After the recovery process is completed, the device will be loaded in normal mode.

If your iPhone hangs in recovery mode, you can find out how to exit the iPhone recovery mode.

If the iPhone is hung on the “apple“, does not turn on and does not respond to a connection to a computer or reboot, you have a good chance to return the smartphone to life yourself. It is easiest to do this through the ReiBoot program, which will do everything for you, but if you wish, you can risk and try to do everything by hand.

DIY repair will not cost you anything (except probably nerves), while for the use of all the ReiBoot options will have to pay: the license costs only 1,509, 2,517 or 3 021 per month, year and unlimited use, respectively, thanks to the temporary Promotion TenorRu30. It gives a 30% discount. Even the maximum version is still less than the service in the official service of Apple. besides, if you do not help you, developers are ready to return money within 7 days from the date of payment.