Water got into the IPhone speaker
And get the best offers from trusted masters.
- Compare and select the best conditions
- Responses only from interested specialists
- Do not lose time to communicate with intermediaries
If the iPhone was filled with water. the speaker does not work, it is urgent to perform a number of procedures that will extend the service life of the phone. The serviceability of the internal elements of the smartphone completely depends on how quickly and correctly you will act. In addition to the processes of iPhone oxidation, damage to contacts and microcircuits due to close. Water is an impeccable conductor of electricity, so even a few drops of rain can lead to a malfunction of the board, connectors and speakers of the mobile device.
Experts offer a number of actions that remove moisture from iPhone. Their timely execution will prevent damage to a mobile phone. If, after independent cleaning from water, sounds are still poorly audible or some of the device functions do not work, refer to a qualified master.
First actions after moisture hit
If the iPhone fell into the water, and you immediately pulled it out, remove all drops of water from its surface. Glue a smartphone that is wet with a dry napkin or a soft cloth. To avoid fluid entering and oxidation of electronic components, dry the phone that was wetted. There are three ways for this:
The most effective and safe way to minimize the effect of moisture on the Apple device that was soaked is to use a special iPhone drying cover. In it, the phone should spend at least 48 hours, after which its performance will be fully restored. It is good to use such a gadget after you got with your iPhone in the rain, accidentally dropped it into the toilet, flooded coffee or other liquid. Before drying the device, it must be turned off.
If there is no case, minimize the effect of moisture on the hitline, the usual rice will help. The procedure for restoring the smartphone, which was wet in the rain, visited the water or on which something spilled, is simple:
- Take a deep cup, put the iPhone in it, who visited the water (toilet, puddle)
- Pour the phone with rice
- dry the smartphone in this way at least a day
The rice should absorb all the water and stop the corrosion process on the internal elements of the iPhone. The disadvantage of this method is the inevitable hit of rice particles into the camera, speakers and other smartphone connectors. After you dry the phone, camera, screen sensor and headphones and charging entrances will have to be cleaned.
If you decide to dry your phone with a hairdryer, avoid strong heating. It is best to first disassemble the iPhone model and pull out its battery. After that, direct the minimum air flow to its internal components, because both Apple sensor and cameras, display, speakers are extremely sensitive to any overheating. Unacceptable:
Otherwise, you will need to replace the screen and other repairs of “Yabloko”.
You can also disassemble and dry the iPhone, which hip or completely “drowned” in the water, naturally. Pull the battery and leave the device open for a day. If after falling into the water your smartphone worked and did not turn off, the listed measures should be enough to completely restore the phone.
The smartphone fell in the snow and the sound does not work. what to do
As soon as the iPhone fell into water or wet snow, you need to urgently turn off the device (if it does not turn off automatically when it fell). When you dropped the iPhone, you can not check:
Do not turn on the wet gadget. then it is likely that damage to the speakers and other components will be minimal. If the speakers do not work on iPhones, the repair will be inexpensive. And in order to change the display module or motherboard affected by snow, you will have to pay a large amount.
The most reliable way to save internal details, if you dropped the iPhone, quickly take it to an authorized service center or a qualified Apple repair specialist. If you yourself are taking the iPhone, found in the snow, make sure that the gadget does not accidentally turn on. In this case, it is necessary to abandon the use of a towel: the humidity inside the iPhone will increase, and the situation will only worsen.
What to do if the iPhone fell in the snow and the service center does not work, or you decided to go there the next day:
- The most important thing is to turn it off and not turn on (unfortunately, you can’t remove the battery in iPhones. it is likely that the device will work poorly, for example, the sound will disappear)
- Remove covers, bumpers and other accessories, remove glass and films from the screen if moisture got there
- Wipe the surface from snow and drops of water, dry the connectors with a cotton swab (dirt in nests is the main reason that the speakers do not work on iPhones and sound disappears)
- Put the device in a container with raw (in no case prepared) rice. the croup has high hygroscopicity, works as a silica gel filler
- Close the container and leave for 24 hours
- extract the iPhone, remove stuck groats from the connectors
You should not have illusions that the rice has removed all the moisture and restored the iPhone. As a rule, the gadget begins to work poorly (the sound disappears, there are problems with the screen) only a few weeks after the iPhone fell in the snow. Even if it seems to you that the cause of the breakdown is eliminated, you need to take the iPhone to the service center or call an experienced master for diagnosis.
Using network services and mobile applications
If there are very few moisture in the phone, you can use special programs. They will make your speaker work at different frequencies. Due to the reproduction of various frequencies and vibrations of the sound of the dynamics, they will be cleansed of water. And you can use their restored functionality.
The popular representative of this genre is the popular English.language service FixMyspeakers.com. Go to it on your smartphone and click on a large button in the center. Loud sound from the speaker will help to save it from the problem.
Other services of this plan are Speaker Cleaner, Soundabout.
How To Fix Muffled iPhone Speakers in 51 Seconds #Shorts
How to quickly dry the speakers of iPhone X, iPhone 8 or 7s
The current iPhone contacts with the aquatic environment are not afraid as old as old. And if you carefully drop modern iPhone on some sea (or to the toilet, for example), that is, the probability that almost nothing is terrible to happen to it.
Almost-this is because even if the device does not break and does not drown, then you still have to somehow remove moisture at least from under the gratings of the speakers. Otherwise, if you do not dry the speakers, then they will sound unpleasant deaf and/or very quietly.
It is noteworthy that this problem is not new and has existed since the time that Apple introduced the IPhone 7S and 7S Plus model to the world, which, unlike all previous ones, are made in buildings with the protection of the IP67 level (from water, dirt and dust).
Nevertheless, the manufacturer has not yet provided its smartphones with a system for removing water from under the gratings of the speakers. Even the new iPhone 8 and the flagship iPhone x. Although the Apple Watch Series 2 has such a system and, judging by the reviews of users, it functions quite efficiently.
But the owners of the iPhone to solve a similar problem need to look for something similar. And in this regard, then about that.
how to dry the speakers iPhone X, iPhone 8 and 7s
To begin with, we note that the method described below is categorically not suitable for earlier iPhone models, t.e. 6s, 6, 5 and other. which in which the design does not provide for the protection of the body from the water. They have to dry the speakers (if there is still any meaning in this) can only be the oldest.
To do this, put a shut on dry and well-absorbing moisture on a time and wait until it is moisture from under the sieves of the speakers to leak/evaporate naturally. Or immediately hand over the device in the SC, where it will be correctly diagnosed and professionally repaired (more details. see here).
If you have a more new iPhone, then the iPhone X, iPhone 8 and 7s, then you can use the more modern method to dry its speakers. For this:
#1. install the Sonic application
Find it in the App Store. Stage and install. In the process of the program, depending on the iPhone model, it may request a password, Touch ID or Face ID.
#2. How to dry the IPhone speakers using the Sonic application
After the successful installation of Sonic, remove moisture from under the gratings of the speakers in two ways:
Run the application, the volume of the speakers we set to the maximum, then with the ples on the screen we “wind up” the desired sound frequency and then tap the Play to enable playback. The frequency of 165 Hz is considered necessary in this case, here it is necessary to get into it. After that, the speakers of the smartphone, as it were, will begin to shake off water themselves.
If the iPhone was badly wet, and there are a lot of water under the gratings, then in the process of further drying you will see how it flows from there. over, it can flow out not only from the main speakers, but from the upper dynamics of the phone. One way or another, but now you just listen to your iPhone. When the sound of the speakers approaches normal, the application can be turned off (Stop button on the screen). The event should be busy no more than 2-3 minutes of time.
This is already in case when 165 Hz and manually dried the speakers did not work. We open the application, slip along the icon in the form of a drop of water in the center of the screen and, holding the press, set a higher frequency (than 165 Hz), after it release and wait for it and wait. You will not see any differences in the work of the iPhone and, most likely, you will not hear. Regardless of what frequency the application will choose. 440 Hz, 1080 Hz or even higher. After the end of the drying stage is completed, we test the result and, if necessary, repeat the procedure again.
In conclusion, we note that Sonic is a program is really useful and if you often find yourself with your iPhone next to reservoirs and other wet places, then this application is better to download in advance and keep in a smartphone. Just in case…
Where the water got into the iPhone: the speaker, under the display or the device does not turn on at all?
Initially, we will try to determine the “degree of disaster”. Surely, if you are already reading this article, then the drowned man is extracted from the liquid medium and off. Carefully inspect the iPhone screen for water clusters under it. Perhaps he will look as shown in the photo below.
If you find that the water is under the iPhone screen or the liquid completely filled the display and this is visible with the naked eye, we advise you to immediately proceed to the section of drying the device using silica gel.
The next problem in the degree of importance of the drowned man in the form of iPhone is a non.working dynamics of the device, after the gadget has visited the water or vice versa, the water independently entered the speaker’s speaker. We advise you not to waste time, and move on to reading the section “How to remove water from the IPhone dynamics”.
We smoothly approached one of the most difficult problems, the solution of which will not be able to an ordinary user. If the iPhone falls into the water and does not turn on, do not try to do this every time, after clicking on the “On/OFF” button. We advise how to perform each of the points of our instructions, including disassemble the iPhone. Carefully read the section of the instructions “disassembly iPhone or iPad”, as well as the item “What to do next with the device”, if none of the ways helped you.
Iphone malfunctions after contact with water
Contact with liquid may have different consequences. In one case, damage can be insignificant and visually invisible, and in others. more serious and noticeable, as well as expensive in the repair. Often, after water enters the display panel, bubbles are formed, the phone begins to work incorrectly. If, after flooding, the smartphone began to constantly reboot, spontaneously turn off, and also the screen defects appeared, then you should use professional help.
First of all, it is necessary to establish what damage to the iPhone 11 after contact with the liquid. To reliably find all the malfunctions, it is necessary to conduct a comprehensive diagnosis using specialized equipment, tools. The liquid can penetrate other nodes and details, gradually violating their operation and completely disable the device itself. At the first signs of incorrect work of the gadget, you should contact specialists. Only a thorough examination, professional diagnosis will help to find all damage.
Stage 2: Removing moisture that has fallen
After the phone has visited the water, you should get rid of the liquid that has fallen under the case. To do this, put the iPhone on the palm of your hand in a vertical position and, with small pathetic movements, try to shake out the remaining moisture.
When the main part of the fluid is removed, the phone should be completely dried. To do this, leave it in a dry and well.ventilated place. To accelerate drying, you can use the hairdryer (however, do not use hot air).
Wet Electronics. How to Make them Work?
Some users advise on their own experience to put the phone all night in a container with rice or cat filler. they have good absorbent properties, allowing you to dry the iPhone much better.
What can not be done
Inappropriate ways of drying the dynamics of a smartphone, which can be not only ineffective, but also dangerous, are common among users of mobile devices. The following methods are strictly forbidden:
Do not dry the phone with a hairdryer. The air flow temperature can heat up individual elements of the smartphone so much that some contacts will melt.
Important! If you are not sure that the methods described in the article fully returned the performance of the dynamics, be sure to contact the service center for help. This will protect the device from a serious breakdown.