What to do when the iPhone fell in the snow

And get the best offers from trusted masters.

  • Compare and select the best conditions
  • Responses only from interested specialists
  • Do not lose time to communicate with intermediaries

The iPhone fell in the snow, the speaker does not work. a typical situation for Apple technology owners who like to talk on the street. Unlike Sony, Apple produces high.tech, but water.permeable gadgets. After the fluid penetration, breakdowns occur: phones are spontaneously turned on, sound in the speakers does not work, strips on the screens appear, and so on.

If the phone falls and moisture gets inside the speakers, you can not work with it, as before. If you dropped the iPhone in a puddle or snow, shed tea, coffee or juice on it, you must turn off the device and take emergency measures, wait for complete drying and prevent the corrosion of internal details:

iPhone 7 / 7 Plus: How to Fix Black Screen/ Wont Turn On/ Blank Display

Do not underestimate the situation if, at first glance, the iPhone fell into a snowdrift of snow without negative consequences. Most users have disappeared sound, spots appeared on the screen and there were problems with the connection only after several months from the date of the phone falling.

iphone, fell, snow, does, turn

To start

Follow our instructions built on the principle of a simple solution to a complex. The manual is universal and is suitable for the iPhone of all models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, SE 2, 7, 7 Plus, 8, 8 Plus, X, XS Max. XR, 11, 11 Pro, 11 Pro Max, 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 Mini, 13 Pro, 13 Pro Max.

Connect to the charger

Perhaps the smartphone just lay without charging for a long time, for example, after a long non.use. the battery was completely discharged. Put the iPhone to charge for at least 15-20 minutes. Use original or high.quality accessories. Do not take it with a broken or broken cable. If everything is done correctly, the phone will show the battery indication with a minimum charge level.

You can try to turn on the device in 20-30 minutes. But most often, after complete discharge, the battery does not come to life and you have to change to a new one.

Make a “tough” reboot

Когда iPhone постоянно (циклически) перезагружается, горит или мигает яблоко, крутится кружок загрузки, можно попробовать привести девайс в рабочее состояние через принудительную перезагрузку.

This is a rough start that helps if the device slows down (dulls), dropping part of the errors in the iOS system. For different models, the discharge will be slightly different:

  • Before the 6s model: hold the Power button “Home” for about 7-10 seconds. As soon as the apple logo appears, you can release the keys.
  • For models of the 7th version: hold the “volume down” “Power”. We are waiting for the screen to go out, and an apple logo will appear. Now you can release the key.
  • For models from x (11, 12, 13 of the model) and higher: once press the “upward up” key, then press the “volume down”, then squeeze the “side button”. Wait for the darkening of the screen and the appearance of the Apple logo. We release the side key.

The same advice works if the iPhone works in DFU mode. It is better to charge the phone in advance to at least 50-60 percent of the charge, and only then make a hard reboot from mechanical buttons.

Restore the phone using specialized

Very often, due to iOS failures, the iPhone turns on, but the screen remains black. At the same time, forced restart with mechanical buttons is useless. For software repairs and and? We recommend using Tenorshare Reiboot to use malfunctions.

  • Download and install Tenorshare Reiboot on a computer.
  • Connect the iPhone to the computer using a USB cable and start Reiboot. When the program automatically finds the iPhone, the main menu containing three available functions will appear on the screen. Select the option “Restore the operating system”.
  • On the main page, select “Start”.
  • You will get to the firmware loading page. From here, look at the desired path and click “Download”.
  • Wait for the successful completion of the load. It can take some time. After all loading the package with the firmware, press the “Restore now” button.
  • Wait a while until the process of installing a new version of iOS is completed. At this stage, your iPhone will automatically restart and load the working version of iOS.

After frost or severe heat

A temperature sensor is installed in the device, which works at a highly high or low temperature.

For the iPhone, this indicator is in the range from 45 ° C to.5 ° C. When this temperature is reached (for example, after frost), the emergency mode is turned on.

If the smartphone has overheated, the user will see the message: “The temperature is raised, cool the device”. iPhone will refuse to work until the equipment is cooled. With too low temperatures, the phone will simply turn off. Warm the device for 20-30 minutes at room temperature to re-start. If the iPhone does not turn on, it is likely that it died in it. Characteristic symptom. does not turn on after discharge.

What to do is strictly prohibited

If the iPhone fell on a wet surface or into water. do not try to dry it yourself. Service centers have special tools to eliminate the problem. Gadget users are often trying to dry, but the probability of a capital breakdown of the iPhone is great. We list the main errors.

  • Independent opening of the body. This requires special screwdrivers, suction cups and other tools, depending on the model and the method of opening. Otherwise, it is not to avoid scratches, chips and other traces of illiterate autopsy.
  • Turning in a towel. It absorbs part of the moisture, and then create all the conditions for further maintenance of the humidity level. As a result. oxidation is accelerated, internal details begin to rot.
  • Drying drying or on the battery. The situation is like a towel. Especially if you turn on the hair dryer mode. If the iPhone is lying on the battery, then with slow evaporation of moisture we will observe the internal destruction of the device. IPhone owners often believe that drying in the sun is a natural and suitable method. In fact. direct sunlight are even more harmful than batteries.
  • Grunting alcohol. Ineffective way to “pull out” the liquid from the device. Even if it helps to dry the iPhone a bit, the screen will remain on the screen.
See also  Which should I choose iPhone XR or 11

If you decide to open the body! Keep in mind that the tightness will now be broken. In addition, prepare the tools first. Look here how to properly open and clean the iPhone from moisture with your own hands. be careful.

iphone, fell, snow, does, turn

Any attempts to shake out water or dry the gadget lead to the fact that moisture moves to other areas. A strong air flow from the hair dryer does it pretty fast. Do not experiment with an expensive device: it’s cheaper to show it to the master. Perhaps even a replacement of the dynamics is not required.

iPhone 5/5s/5c/SE: Won’t Charge, Won’t Turn On, Black Screen NO PROBLEM!

What to do next

After several days of successful drying of the phone, try to turn it on. If it does not work, you will have to contact specialists. Do not expect to use the guarantee: all iPhones are equipped with special internal moisture indicators. When fluids get on them, they change their color forever. Thus, it makes no sense to pretend that the device came out of LADA for unknown reasons.

If the iPhone has fallen into water, this can lead to significant problems with the battery. Problems become obvious not immediately, but only a few months later. The case is known when the iPhone 3GS was suddenly ignited, which more than a year before was redeemed in the pool. Its owner used the technique of drying with rice and all this time the phone continued to work perfectly.

Therefore, if after such a case your “apple” smartphone resumed normal work, do not hesitate with the creation of backup copies. Who knows, perhaps its restoration is only temporary.

For more difficult cases, when you need to disassemble the iPhone and clean the brush, we made more instructions, see here. There you will understand that it is important to clean the iPhone, since there are salt stains. This violates the correct job.

What do experts do if the iPhone fell into water or snow

When experts find out that the smartphone has fallen in the snow and does not work, they immediately disassemble the device. All spare parts are blown by compressed air, cleaned with a Click Click from minerals and salts, checked for performance. Damaged elements (speakers, GPS modules or other.) replace with new original accessories Apple.

  • Use a hair dryer (hot air stream accelerates the drying of the liquid, but you risk damaging the parts and move moisture to other areas)
  • Dry the device under direct sunlight, batteries and heater
  • pour alcohol (if the gadget fell in the snow and does not work, alcohol will help to extract moisture, but there is a side effect. stains on the screen)
  • independently work with iPhones without experience, qualifications, professional tools (suction cup, tweezers, mini-confrontation)

There may be such a situation: the sound disappeared due to software failures, and not because the iPhone fell in the snow. Then the professionals and the owners of the iPhone themselves can take the following steps: change the volume, restart the device, update the firmware or drop all the settings.

The fall of a gadget worth a thousand dollars in water is a real tragedy for the owner. He should immediately have an impressive account before his eyes, which will be presented to the repairmen after the “resuscitation” of the device if it is possible. In such a situation, greed often prevails over common sense, and then the owner of the “drowned” iPhone begins to “delve” on the Internet, trying to find “folk” means of removal of moisture.

To argue that there are no effective methods of “folk treatment”, of course, no qualified specialist will be taken. At the same time, each master will confirm that most of the tips that are found on the Internet are given by amateurs and are only able to push the iPhone to “death”. There is a list of mandatory actions that the owner of the “flooded” iPhone must perform; going beyond this list and the desire to show the initiative leads to a huge risk.

For many users, probably, the fact that water is far from the most dangerous liquid for mobile devices will be the discovery. The negative impact on the technique is exerted by salts and minerals contained in the water. They are chemically active substances in the oxidation reaction. that is, when oxygen contacts, the metal structure is harmful.

The danger of liquid for technology can be judged by the PH. level of acidity (or hydrogen indicator ). The lower the pH, the more dangerous the environment is. Water is an absolutely neutral liquid. its value is PH 7. Fluids with a higher level of acidity. usually alkaline. For the iPhone they carry the least threat.

The enemy needs to know in the face. what liquids can instill the gadget instantly?

With long.term contact with the listed substances, the gadget will be already impossible to save.

On the contrary, almost harmless to the smartphone in terms of oxidation sea ​​water (pH = 8.0), ammonia (pH = 11.5), chlorine (pH = 12.5). Distilled water is completely harmless, from which all salts and minerals are generally removed.

The oxidation of the elements of the smartphone is not the only danger. It should be remembered that water is an excellent electricity conductor. That is why the penetration of fluid into the body can provoke short circuits. which will be repeated until the food is disconnected in its entirety. Even one closure may be enough to “fry” a couple of microcircuits-several such circuits will definitely send the gadget “to the other world”.

See also  How to connect both wireless headphones Mi

It depends on how quickly and accurately the owner of the iPhone will act, whether he will be able to “reanimate” the device.

The order of salvation iPhone

If the iPhone fell into the water, immediately pull it off, turn it off. Then wipe the device by removing visible traces of moisture. The problem of Apple phones is that they can’t just remove the battery. If there are no tools for opening the iPhone housing at hand, immediately take the device to the service center. No need to wrap it in a towel or any other fabric. so you will only increase the humidity level.

You need to go directly to the repairmen, and not to the reception center of the service center, from where the phone will go to restore at best in a few hours. The faster the experts will take up the correction of your mistake, the higher the chances that the phone will continue to work.

“Drinniki” in a hurry is versed in the last screw. Each component on which there are traces of water is blown by a flow of air and is checked for more serious damage. The greatest danger to the device is damage to the motherboard. Replacing it is as expensive as going to the store and buy a new phone.

To restore chips and contacts, experts use a powerful soldering station. First of all, the components are cleaned of minerals and salts using a microscope, a brush with a soft pile and a special solution.

After cleaning, the master evaluates the degree of damage. If the phone did not swim for long and was immediately brought to the repairmen, then everything will end well. If at first the user tried to get rid of moisture with “folk remedies”, and turned to specialists a few days/weeks later, when serious problems appeared in work, then restoring such a gadget will be very problematic and expensive.


They may appear in the following cases:

In most cases, the malfunction is directly related to a damaged screen or body, which allows you to simply replace these parts. When exposed to moisture or pollution of the phone (connectors, buttons, touchscreen, speakers), simple drying or cleaning can help.

With damage to the system board and processor, the situation is much more difficult. it is possible to eliminate their problems only by completely replacing these parts. Below we will talk about other cases associated with mechanical damage to the iPhone.

Power controller

One of the widespread problems is associated with a power controller. a small detail, the breakdown of which leads to a rapid loss of charge. The user does not have time to blink, the phone is already completely discharged. First of all, you can try to replace the battery, but this is only one of the possible options for such a situation.

First, let’s make sure that the matter is really crazy for the power controller.

The following signs should be available:

Attention! Repair of this part is rather painstaking and requiring special skills process. In the presence of the above signs, we recommend contacting the service center.

Water hit

The ingress of the apparatus into the water is one of the main fears of the owners of smartphones. What to do if the iPhone fell into the water and does not turn on?

In such a situation, it is necessary to act without delay:

Voltage drops

You are worried about quick discharge of a smartphone? This may also be due to improper feed, especially if non.original charging is used. This can cause irreparable damage to the battery and lead to voltage differences, from which the smartphone can burn.

To avoid unjustified costs of repairing system fees and batteries, it recommends replacing charging with the original.

The battery has become a spent

The iPhone battery, of course, is not eternal. Over time, the device begins to discharge faster and even completely turn off. Only one tool can help here. replacing the battery.

To extend the life of the battery, pay attention to the following tips:

  • Always charge the smartphone up to 100%, avoid frequent short.term charges;
  • Use the original charger;
  • Do not reboot the phone with unnecessary applications. their work also affects the aging of the battery.

iPhone does not turn on

iPhone does not turn on. one of the most frightening users of situations. What are its reasons? This will be considered later.

Due to a broken charging connector

This case is associated with the inability to charge the device. This is a very common breakdown that occurs during critical contamination of the charging connector. Also, the connector can simply break with a sloppy attempt to charge the phone.

You can try to solve this problem yourself, cleaning the connector, but this does not always work out at home. With strong contamination, the best solution will be to contact specialists.

After the firmware

This problem occurs directly during the firmware, when the phone suddenly turns off.

In any of these cases, you do not need to panic. a new firmware of the device will help.

After falling from a height

The reason for the occurrence of problems if the user dropped the phone is quite clear. Most often, it lies in the disconnection of one of the loops leading to the battery, screen or button of turning on.

With a strong blow, problems could have arisen and more serious. violation of soldering on the system board or breakdown of one of the microcircuits. If you have the necessary skills, you can try to eliminate the breakdown yourself by promoting the smartphone and connecting a problem loop. If not, you have to contact the service center.

After replacing the display

Another common problem. Its cause is mainly incorrect assembly or problems with a train leading to the screen. You can eliminate the problem yourself by dismantling the body and checking the problem loop, or with the help of a specialist.

iphone, fell, snow, does, turn

After resetting the settings

If the iPhone does not turn on after resetting the settings, then the following procedure can help:

When charging

Disconnects of the device during charging are most often associated with the problems of the battery or non.original charging. It may also be due to the breakdown of the power controller, which we have already talked about above.

After Jailbreak

Hanging the device after Jailbreak is another common problem.

After rebooting

What to do if the phone does not start after rebooting and only vibrates? In this case, a forced reboot will help in this case. To do this, it is enough to squeeze the “Noma” and “Power” buttons for a few seconds until the Apple logo appears on the screen.

See also  How to throw information from iPhone on iPhone

Attention! Forced rebooting does not delete any data from the device. It can be carried out even if the screen went out, and the buttons do not respond to pressing.

What to do and what to do if your iPhone is in water or snow.

One of the most unpleasant situations that the owner of a modern iPhone may face is the fall of an expensive device in snow or in water. Such a nuisance usually occurs in the autumn-spring period and in winter, when people conduct their conversations on the street, not paying attention to cloudy weather. You can accidentally drop the phone in a puddle or snow under your feet. Moisture can fall into the device and at the moment when a conversation is being conducted on a mobile phone in the rain.

Manufacturers of popular “smart phones” are trying to prevent moisture in the device in such situations, so they initially complete the phone with a special moisture.proof building. “Directly revolutionary invention!”. You say. Yes, but, unfortunately, such a leading manufacturer of smartphones as Apple has not yet set itself the goal of equipping its devices with similar protective buildings. This unwillingness to “branded” is explained: Apple uses in its digital technique only those modern technologies that are literally brought to perfection. “Raw” innovations are not customary to introduce.

When the iPhone accidentally gets into the water without a protective case, many owners are horrified and simply do not know what to do.

There are several universal tips that, if they do not correct, then, in any case, they will not aggravate the problem even more.

one. First of all, the mobile phone needs to be turned off and dried. It will not work to pull out the battery from the wet iPhone, since it is impossible to disassemble its case. A mobile phone of this type should lie down on at least 24 hours.

The case will also have to be removed. You should also check for the presence of moisture traces under the film. If such traces are detected, then the film will need to be removed.

It is important to immediately wipe the phone with a dry cloth. You can also often find the following recommendations: put a wet iPhone in a bowl with ordinary rice, since this croup has exceptional hygroscopic properties. You will have to upset you, as this technique works with old.style mobile phones, in which you can disassemble the case.

Only a qualified master should disassemble the iPhone. Even if the user is familiar with the process of disassembling his smart phone, you should not do it.

It is impossible to use a hairdryer and similar devices for drying the phone, because a stream of warm air, even at a minimum temperature, may not be eliminated, but rather, drive moisture even further inside the phone and further aggravate the situation.

Different sources are often advised to extract moisture from the body thanks to a straw or cotton sticks. These are also prohibited techniques: you can accidentally damage the exact iPhone mechanism.

Modern apple technology or other leading world manufacturers has one not quite pleasant feature. If the water falls inside the iPhone case, namely on its boards, then the owner may not feel the consequences of this unpleasant incident right away. For example, if the phone fell into the water today and after completely drying works as usual, then in a few weeks the sensor may stop responding, sound may disappear during a conversation, etc.P. Such consequences are always unpleasant for the owner of the iPhone. Given this fact, after the phone gets into the snow or into the water, it must be attributed to the service center to check the serviceability of all systems, even if everything works fine. The service center has qualified specialists who know what exactly should be done with the device that has passed the “bathing procedure”.

If the owner brought his phone injured from moisture to the service center, he must tell the master what exactly happened to the device (fell into a puddle, fell under a powerful stream of water, suffered under light rain). After all, each type of moisture exposure on a mobile phone differs both the consequences and the type of repair work that must be undertaken to eliminate them. Do not hide if the device is wet due to the guilt of the user. This fact will not affect the cost of repairs, and the master will facilitate the diagnosis and elimination of the problem. Sensors installed within each modern iPhone will help a professional. They respond to moisture and significantly simplify the diagnosis of a possible malfunction of the device. Due to their presence, you can accurately determine where the moisture was inside the device.

In a good service center, the masters will qualitatively dry all the components of the mobile device. If during the diagnosis it was found that the water fell on important components of the system, the company will offer to carry out the necessary repair work to eliminate possible malfunctions. After the repair, the client will not even notice that his phone is in contact with water or snow. the device will work like a new.

It will not work to hide the contact of the device with water or snow, since it can be determined by sensors. If the owner does not plan to sell his mobile phone from Apple, then timely and high.quality prevention of the device after such a “bathing” will help to avoid possible negative consequences.

If I have iPhone 7 and above

Owners of the iPhone 7 and above were more fortunate, they have declared protection under the IP67 standard. This means that the smartphone is able to withstand water at a depth of 1 meter for 30 minutes. But this is only in fresh water! Never dip iPhone or iPad in sea water!

Since snow is not a liquid, you should not worry about pressure. The maximum that can happen is snow in the speakers or Lightning connector. What to do with this, we have already told above.