Table of Contents

Apple iPhone: Cannot Verify Server Identity

We are preparing yesterday a guide to bypassing the limit for downloading files larger than 100 Mb for Apple iPhone users who are sitting purely on the mobile Internet, when suddenly the following appears on the screen:

Unable to verify server identity. Safari cannot verify the identity of the certificate, “www.Apple.com”. To continue, view the details of the certificate.

It seemed that he didn’t really do anything, only delved into the date and time settings, but the phone started complaining either about invalid certificates or about the server’s identity. Here’s another such notice:

Verification failed. The certificate for this server is not valid. You may be connecting to a server that mimics “setup.iCloud.com”, which could put your confidential information at risk.

Well, since Safari refuses to open Web pages, the App Store also stopped working, decided to launch the mobile browser Chrome, but everything is dull there too:

Your connection is not secure. Attackers may try to steal your data from www.Apple.com (for example, passwords, messages or bank card numbers).

It turned out to be the fault of the incorrectly set date and time. If you encounter such warnings, then set the date and time in the iPhone correctly. instructions.

Identity, certificates and servers will work immediately as usual. If the year in the iPhone has gone very far, then turning on and off the Automatic toggle switch, which is located. Settings. Date and time, helped to quickly return the correct date. The errors above disappear immediately.

Introducing iPhone 7 to DFU. Method 1

To put 7 in DFU mode, you need a computer with iTunes connected to the Internet, a USB cable and the phone itself. If the computer does not have access to the Internet, then iTunes will display the following:

iTunes could not connect to the iPhone software update server because you are not connected to the Internet.

Make sure your internet connection is active and try again.

  • We connect the iPhone 7 to the computer with a USB cable, it is desirable that the cable is native or certified.
  • Run the iTunes program on the computer.
  • On the turned on iPhone 7, we hold down two buttons at once. Volume Down and the Power button (Off), hold both until the device turns off.
  • As soon as the phone turns off, immediately release the Power button, while continuing to hold the volume down button.
iphone, cannot, verify, server, identity

Attention! In DFU mode, the screen is black, if you have a cable and an iTunes icon on the display, then the iPhone 7 is in Recovery mode (recovery mode), and not in DFU.

We hold the volume down button until iTunes starts suggesting any actions, he offered us to check the update:

iTunes needs to check for carrier settings updates for iPhone.

Click. Check, after which iTunes reports successful entry into DFU:

iTunes detects iPhone in recovery mode and phone screen should be pure black.

Turn on DFU mode in iPhone 7 and 7 Plus

Apple iPhone models prior to 6S enter DFU mode like this. old DFU.

With the release of the iPhone 7 and the older iPhone 7 Plus, the input to DFU has changed, all subsequent models with a touch button are waiting for the same account. If you do not know whether the touch button is in your iPhone or not, then keep in mind. the touch button does not create the effect of pressing at all when the phone is turned off. The lack of a physical button was reflected in other instructions as well:

DFU iPhone 7 Plus Input

If the first method does not work, then try the second method of transferring to DFU:

  • We connect the smartphone to the computer. Run the installed iTunes
  • Turn off the iPhone 7, if you do not know how to turn it off, see. here.
  • After waiting a little for the phone to turn off completely, hold down the volume down button and On. (Off), keep them for 10 seconds.
  • After 10 seconds, release the Power button, while continuing to hold the Volume Down button.

If it doesn’t work the first time, use the second hand of the watch for an even 10-second countdown. All other actions are the same as in the first method. You need to continue holding the Volume Down button until the reaction in iTunes.

iPhone 7: Quit DFU

To get the iPhone 7 out of DFU mode, we hold down for 10 seconds, simultaneously pressed the Volume Down and Power On buttons, after which an apple appears and the phone turns on in normal mode.

Having changed your mind about restoring iPhone 7, you can exit DFU by pressing the button. Eject iPhone, in iTunes, after which you need to wait a little and the phone will reboot itself into working mode.

IPhone Activation Fails After Resetting iPhone, Activation Error, 0xE8000013, 0xE8000015 (Solution)

Why were not enough circumstances and methods of their elimination been examined? The fact is that with the help of them you can solve the bulk of the problems that appear when the server certificate is invalid. If they did not help, then for you it is unlikely that you can already remove the malfunctions, and here you need the help of a specialist.

As you know, an organization or users can use the Apple Developer Enterprise Program software to create corporate programs for iOS and install them for their own use or in organizations. But before that it is necessary to pass the check and if the application is installed “manually” then the check must be carried out in manual mode.

Bypass activation. Exit to the iOS 7 menu

  • Incorrectly set time.
  • A discrepancy with the software designed to view the global network.

And how to remove these difficulties? At the moment, attention will be paid to this issue.

Most popular reason. If the time or date is incorrect on the computer, then when all the files are received, the machine sees that the characteristics do not match, and informs the user that the server certificate is invalid. This is all done in order to protect the person who goes to the web, and to prevent the loss of important data for him. It is not at all difficult to correct this problem. for this it is enough just to correct the time to the current date and hour, and this difficulty will not be. This case accounts for approximately 95% of similar incidents.

What if the discrepancy is not in time, but in something else? And no matter what you do, the server certificate is invalid and remains in this status? And with all this, access to data should be obtained urgently? Well, if there is no time to find the real reason, then you can do it simply and perfectly. just turn off the certificate verification. To do this, you need to go to the options of your own browser, then go to the security section and perform the necessary actions (a more specific plan directly depends on the program used). And the computer will not be able to block access to the website because the server certificate is invalid. But do these acts with respect to only those network resources that you trust.

Can’t check iOS app, iPhone. what to do?

We are preparing yesterday a guide to bypassing the limit for downloading files larger than 100 Mb for Apple iPhone users who are sitting purely on the mobile Internet, when suddenly the following appears on the screen:

Unable to verify server identity. Safari cannot verify the identity of the certificate, “www.Apple.com”. To continue, view the details of the certificate.

Verification failed. The certificate for this server is not valid. You may be connecting to a server that mimics “setup.iCloud.com”, which could put your confidential information at risk.

Well, since Safari refuses to open Web pages, the App Store also stopped working, decided to launch the mobile Chrome browser, but everything is dull there too:

READ  How to enable geolocation on iPhone 8

Your connection is not secure. Attackers may try to steal your data from the www.Apple.com website (for example, passwords, messages or bank card numbers).

It turned out to be the fault of the incorrect date and time. If you encounter such warnings, then set the date and time in the iPhone correctly. instructions.

Identity, certificates and servers will work immediately as usual. If the year in the iPhone has gone very far, then turning on and off the Automatic toggle switch, which is located. Settings. Date and time, helped to quickly return the correct date. The errors above disappear immediately.

When you open your browser, you plan that everything will be in normal mode. But what if the computer doesn’t want to work properly? And reports that the server certificate is invalid? In this case, you need to check how everything works, whether everything is set correctly, and if there are any problems. You can see this message on large websites (invalid Google server certificate, “”), which simply cannot make such an oversight.

To begin with: what is this designation used for? What does it mean when the computer reports that the certificate presented by the server is invalid? Thus, the computer says that the electrical documents of the website that it provided have some kind of incorrectness, so the machine has reason to hesitate as to its authenticity or its usefulness. This discrepancy may appear both due to problems on the server side, and due to incorrectness on the user’s EOM. If we consider the first version, then here it may be like this:

  • There is a problem with the website of the certification authority. All this evidence is given out by special organizations. And like any other, they are not immune from probable troubles like terrorists, earthquakes, landslides, damage to transmission lines and many other troubles. But this happens very rarely, and there is little hope for this point.
  • Website obstruction due to technical problems or willful harm. Here, too, something can go wrong. The sysadmin pressed something wrong or the attackers are attacking the server, the result is one. the server certificate is invalid. But this also happens occasionally.

The main obstacles of this type occur mainly on the user’s client computers. There may already be a much wider range of circumstances, therefore the main ones will be named:

Causes of iOS program verification error

The error “Cannot verify the program” most often occurs when trying to establish a connection to the site https://ppq.Apple.com. you can check and open the link in your browser. The reason for this is blocking the address by your network, provider or sanctions. For example, in countries protected by the Great Firewall of China. China or North Korea. A bundle of Shadowrocket and a VPN client has proven itself as a solution.

How to fix a program trust check error

In order to get around failures when connecting to https://ppq.Apple.com, we need to resort to using Shadowrocket and VPN. For this

  • Download Shadowrocket from the AppStore. At the time of this writing, the program costs 2.99
  • Then we set ourselves a working VPN from the AppStore or search on the Internet.
  • We launch the VPN client in Shadowrocket. we get access to the verification servers and check the applications.

Shadowrocket is a useful utility of its main advantages are the following:

  • Capture all HTTP / HTTPS / TCP traffic from any application on the device and redirect to a proxy server.
  • Recording and displaying HTTP, HTTPS, DNS requests from iOS devices.
  • Rule Settings for Domain Matching, Domain Suffix, Keywords, CIDR IP Range Range, and / or GeoIP Search.
  • Measurement of traffic and network speed over WI-FI, cellular, direct and proxy connections.
  • Blocking ads by domain.
  • Local DNS mapping.
  • Work with 3G, 4G networks.
  • Decryption of HTTPS traffic.
  • URL rewriting.
  • Full IPv6 support.

As you can see, the Shadowrocket utility will be useful not only for checking the trust in programs, but also for blocking ads by domain name and full-fledged work with URL addresses and HTTPS traffic.

SIM card check

Before contacting the provider’s support, it is worth checking if the SIM is inserted correctly. If inserted in the wrong side, then put it in the correct slot, and also check the activity of the card.

IPhone hardware issues

Problems can occur due to glitches in the phone. These include:

iphone, cannot, verify, server, identity
  • failure of the visibility of the SIM card;
  • constant network search, even without a SIM card.

The expert in the service center can determine the exact problem.

SIM card not supported

  • contact your provider for a new card;
  • try to activate with a different sim card;
  • check the official website for information on the phone;
  • contact the official representative.

IPhone 4 / 4S / 5 / 5S / 6 / 6S / 7 / X activation error: what to do if an update is required after a factory reset

In 2021, iPhones from Apple are gaining even more popularity. When trying to reinstall the firmware from an old version to a new one, an error may appear in the form of a failed activation of the iPhone 4 / 4s / 5 / 5s / 6 / 6s / 7 / X. We have prepared a detailed article telling about all the nuances of work.

Updating

In cases where programs fail and it is not possible to activate your account, an update will help. The process does not take much time and for a sufficiently stable Internet or computer.

Activation via iTunes

In cases where internet connection did not solve the problem. The firmware is being downloaded via iTunes, you should update to the latest version before starting. Steps:

  • run the program on a computer and connect a smartphone to it;
  • we go through authorization and choose a device from the proposed ones;
  • click on “Browse” and select “Update” in the block with a description of the device;
  • follow the instructions during the update and complete the action with activation;
  • disconnect the phone from the PC after the message about the successful unlocking.

The reasons

Any operating system can have bugs in work, but among mobiles, iOS is the most vulnerable. Common causes of activation failure are:

  • unstable operation of the company’s servers, in such cases it is highlighted. it is not possible to contact the server;
  • the server is temporarily unavailable. means that repairs are underway and the update can be downloaded from the official iTunes;
  • an authentication error can occur due to an unstable connection, as well as with a compromised firmware and an old account;
  • an error in the cellular network when replacing the SIM, in which case you need to replace the card with the operator or change the provider;
  • failure to verify Apple ID, may occur when connecting to a computer through a broken cord.

How to fix “your iPhone could not be activated because it cannot contact the activation server

The error can be caused by maintenance work on the server or blocking access. To fix it:

  • go to the company’s website and check information about the health of the servers and the release of new firmware;
  • check access via Wi-Fi router.

Some routers are configured to block the domain and prevent actions. Also, during the release of new versions, there is a high percentage of server load, and the connection may be interrupted. In this case, you need to wait and try again the next day.

“Unable to Verify Server Identity” Error on iPhone and iPad. How to Fix?

Hello everyone! But today I was really very scared. Why? Simply because by going to any application on my long-suffering iPhone (which requires logging in and entering a password) or to any page in the browser, I could not do anything. Websites did not open, Qiwi, Internet Bank, App Store, etc. did not open. Depending on what was used on the screen, a window appeared with different inscriptions.

It should be noted, very incomprehensible inscriptions. I, a long-term user of Apple gadgets, have seen some of them for the first time. There was a feeling that absolutely everything “broke” and some kind of local program apocalypse began. Any program, any site, any game refused to work. In more detail, this is what happened.

When using Safari, an error message popped up:

“Unable to verify server identity. Safari cannot verify the identity of the certificate. To continue see the detailed information of the certificate “.

And if you click “continue”, nothing happens.

At the same time, if we talk about various programs, then not everything is smooth there either. for example, Qiwi greeted me with a similar message:

How to Fix Cannot Verify Server Identity Pop-up on iPhone and iPad in iOS 14?

“The certificate for this server is not valid. You are connecting to a server that mimics w.qiwi.com, which may put your confidential information at risk. “.

Although, of course, I definitely did not connect to any “mock server”.

over. I don’t even know what it is! 🙂

I think okay, the iPhone is half the trouble, and I got to check it on the iPad, and then

At first I thought that I had caught a virus. But on the other hand, if you think sensibly, it is unlikely that the virus appeared on both devices at once, and there is no such “pest” on iOS. And here the question arose, what to do? How to get rid of this misunderstanding and where did it come from? I began to remember and

As it turned out, everything is very simple and no malware has anything to do with it. The fact is that in order to prepare beautiful screenshots and write one article, I had to rewind the date several years ago. And then quite right! I forgot to put it back.

So such problems with “invalid and unverified certificates” in the Safari browser and other applications can be solved quite simply. you just need to set the correct date on the iPhone or iPad (well, just in case, restart the device). After this procedure, the errors will disappear and everything will work as before.!

READ  Sync iPhone to Computer via iTunes

Internet connection problems

Lack of Internet connection may cause iPhone activation to fail.

Note! In addition to traditional networks, some wireless Wi-Fi are capable of blocking attempts by the gadget to activate.

  • some gadgets from Apple can only work with a SIM card of a certain cellular operator. Such devices are usually called contract or gilded. You can find out if this is so on specialized sites (for example, at IMEI.info);
  • some devices may display an “Activation Failed” message due to the fact that they could simply freeze;
  • a possible reason can also be the performed procedure of updating the firmware version to the latest version or restoring;
  • there are iPhones on which the beta version of the firmware is installed. Such a gadget cannot be activated because it is not registered with Apple.

IPhone 4, 5, 6, 7 activation failed. what to do

The key difference between smartphones from Apple and all similar ones is a close relationship with the manufacturer throughout the entire life of the gadget. All services provided by it are possible only with an activated device. However, the user may face a problem when the iPhone refuses to go through the activation procedure, making these functions unavailable.

Reset

iPhone may refuse to activate after a factory reset has been performed on the device. A similar problem is observed on iPhones with iOS 11 and higher, which have been repaired in an unofficial service. In such workshops, non-original components could be installed on the device.

Another case. the smartphone was bought from hands, while its origin remains a mystery with seven seals. Assembled do not understand from what in a semi-handicraft way, such a device, after resetting the settings for activation by a new user, may not pass it and become completely inoperable.

What is activation failure on iPhone 4, 5, 6, 7 and other models

When the message “Unable to activate iPhone” is displayed, the owner of such a device faces a problem. The fact is that in this case it will not be possible to use the gadget to the fullest: make calls, send messages, there will be no possibility of data synchronization and OS updates.

Hardware problems

The worst reason is that the modem is faulty, which is responsible for the activation. Only contacting the service center will help here, since it is not impossible to solve this problem on your own, but simply dangerous. After such a repair, you can finally break the device.

What does it mean if iPhone activation lock is set

IPhone Activation Lock is a method to protect your device if it is lost or stolen. Such a device cannot be used, since the iPhone is not activated, which means that it is impossible to work with it until a special password is entered.

This mode is enabled if the iPhone owner has enabled the Find My Device option in Find My. From this time on, the phone number will be displayed on the screen of the gadget, which should be used to call the person who found the device.

Note! The “Activation lock” option also allows you to remotely erase all data from the phone’s memory, so that unlocked people will not be able to use the owner’s personal data even when unlocking.

Reasons for activation failure on iPhone

Failure to activate the iPhone does not occur out of the blue, it is preceded by some actions of the user himself. Although there are cases of breakdown of the device itself. Below is a description of why iPhone cannot activate.

What to do if iPhone 4 / 4s / 5 / 5s / 6 / 6s / 7 / X activation fails

If the service notifies you about technical server problems, then the only way out is to wait for the servers to work again.

If activation is blocked, then the previous user did not change accounts and did not delete data from his iCloud. The presented security measure was developed in case of smartphone theft. To unlock a gadget, you need to specify the ID and code associated with the old account (previous owner). It is also necessary to erase the account, replacing it with a new one.

cannot verify server identity,How to Fix cannot verify server Identity keep popping up iPhone iPad

The second solution to block activation involves a call to AppleCare, where specialists will help with the question if the user can prove that the iPhone belongs to him.

Apple server is temporarily unavailable

The presented error will show the user an inscription. the server is temporarily unavailable. That is, it was not possible to get activation information from it. In this situation, your efforts are powerless. Server performance depends entirely on the company. The only way out is to wait for the developers to be able to bring up the servers and make them work.

Information about their work can be obtained on the official website. https://www.Apple.com/ru/support/systemstatus/. Active ones are marked in green, and disabled ones are marked in red.

Mobile network blocking check

Check if your mobile network is working. Possibly the reason is related to poor online connection. Use Wi-Fi.

Internet connection problems

The next reason implies an unstable internet connection. In other words, it is not possible to contact the server to which the information from your smartphone should be received. Check the stability of the mobile network. It is recommended to connect to Wi-Fi to solve the problem.

Reset

IPhone activation error after factory reset? When Apple released the updated iOS 11 firmware, it made some changes to its smartphone repair policy. If the phone has undergone repair work, during which defective parts were replaced, then it is important that purely original components are installed in it.

The use of “left” components will definitely block the device after you reset the settings. At the same time, it will not be possible to activate the system.

It should be noted that older versions of the operating system are not affected by this factor. That is, you can safely reset the parameters without fear that your mobile phone will turn into a “brick”. The policy presented has been changed for iOS 11 and 12 only. Refurbished phones should therefore be avoided.

Thus, the company decided to add additional security measures. When the user has reset the settings when the device boots up, the system sends the component information to the Apple Technical Center. If the security system detects non-original parts in the phone that are not in the official database of the company, it will automatically block it.

The solution to the problem is to contact the service under warranty.

IPhone 4 / 4s / 5 / 5s / 6 / 6s / 7 / X activation failed. reasons and what to do?

IPhone activation failure can occur on different smartphone models. The presented problem can occur due to several reasons. To fix the error, you need to check what influenced its appearance.

Reboot

In some situations, a reboot or reset may help. IPhones reboot when you hold down the Home and Screen off buttons.

Resolving the error “Unable to establish a reliable connection to the server” in Google Play

One of the most popular operating systems for mobile devices today is “Android”. It has a number of huge advantages over its competitors and is practically the undisputed leader. However, more recently, there have been reports of problems with one of the main services of “Android” devices, namely Google Play. When logging in, the application started giving an error: “Unable to establish a reliable connection.” The system help provided by the vendors is of no help. Then how to solve the problem that has arisen?

Youtube

The last method of solving the problem lies in additional programs. It is assumed that the user cannot log into Google Play due to out of order addressing settings in the “Google”.account.

The utility for watching videos from YouTube (any other program that uses a Google account for registration), preinstalled on many “Android” devices, will help to cope with the problem. The bottom line is that you just need to launch the application and through it go to your GMail account.

Fast and easy

To begin with, we will give a method that does not require any complex and dangerous operations with the gadget from you. The simplest fix for the “Unable to establish a reliable connection” error is based on system settings. You just need to check the system date and time on your Android device. They should match the real ones within one minute. This is due to restrictions on the validity of program certificates. If the date is incorrect, the phone will consider that the certificate has not expired yet or has already passed.

I will clean up

This method is suitable for those who do not have any important data saved on the device. Although, in fact, photos and videos can always be transferred to a computer, and applications can be downloaded again, especially if you have synchronized your data with your Google account. Then even when reinstalling, all application data will have to be preserved. So, there are two ways to resolve the “Unable to establish a reliable connection to the server” error.

  • Reset your phone to factory settings. You can use special programs that are offered by application developers, or find instructions that are suitable specifically for your model of “Android” device. After all, each manufacturer has its own tricks and protection mechanisms.
  • Add a new account. As you understand, old data will not be copied to new versions of applications, but on the other hand, you can avoid problems with transferring other information, which must be saved when the phone is completely cleaned. To add a new account, do the following:
  • Download the AddAccount application via a computer or phone browser.
  • Save the downloaded APK file to the start directory on your phone’s memory card.
  • In a standard browser, enter: content: //com.Android.htmlfileprovider/sdcard/add_account.APK.
  • Follow the link.
  • Run the program. Enter your mail on Google and click Add Account.
  • If you receive a message about an incorrect password, enter it and continue. That’s it, you have a new account.
READ  How to activate iPhone without a SIM card

In addition to the cardinal methods, there is also a less dangerous solution. “Failed to establish a reliable connection to the server.” this is an error related to the temporary and personal data of the application. Therefore, possible ways out of the problem situation can be looked for in another area.

Freedom

As statistics show, sometimes problems with Google Play can be associated with other applications. In particular, the Freedom program. She is responsible for purchases in the application we are considering. The problem that you cannot establish a reliable connection to the server can occur if you downloaded and uninstalled Freedom, having previously forgotten to turn it off. As is clear from the above, in order to get everything back, download and install this utility. After that, enter it and stop by clicking on the Stop button. Then you can safely delete.

Reboot on your iPhone

If you notice a pop-up message stating that your iPhone cannot verify the identity of the server, try restarting your device. In fact, it can be a basic but very effective solution that you can try. Restarting can fix many of the issues related to your iOS devices. If your iPhone is unable to authenticate the server due to a minor glitch, you can easily overcome it by restarting.

To reboot on your iPhone, you have to follow the steps given below.

  • Press and hold the power button of your device until you see the slider. This slider appears at the top of the display.
  • When you see the slider, you have to drag it with your finger to the right side of the screen. It should turn off your iPhone easily.
  • Now that you’ve turned off your device, you should wait for about a minute or so. Then press and hold the power button of your device for a few seconds.
  • You will be able to see the Apple logo on the screen as soon as the device starts up again. Release the power button.

Now you can check if you can open the mail app and send an email.

Main Features Associated with iMyFone Umate Pro

  • Umate Pro. it is special software that can solve problems such as “iPhone cannot authenticate the server”, iPhone screen is Black, iPhone keeps restarting, iMessage does not work
  • One-click operation to troubleshoot mail problems
  • Easily removes all unnecessary files, cache and temporary files on your iOS device
  • This clears your personal data and makes your device more secure.
  • Can be used to reset all settings of your iPhone and fix all glitches
  • It does not cause data loss on your iOS device
  • You don’t need to install any app on your iPhone, iPad or iPod

Using iMyFone Umate Pro fixes “Server Authentication Unable to Authenticate” issue

As you may have already seen, not being able to send an email at a critical time is really frustrating. When it comes to a question like “Can’t verify the identity of the iOS 13 server” you need to fix that. Otherwise, sending emails or receiving important emails can be a nightmare for you.

Some of the common methods we use to fix iPhone related issues can be temporary. Some of these problems can arise at one time or another. If you need to resolve iOS related issues, you need to find a professional tool. You must remember that “the server cannot be authenticated.” this is another problem that comes up on your iPhone. Any iPhone can experience a lot of minor glitches if you use it for an extended period. In other words, there is no unbeatable iPhone yet. Applications, including Mail, can freeze due to clogged cache memory, junk files, and many other problems. Thus, having a powerful tool to deal with such cases is a must.

This is exactly when a tool like iMyFone Umate Pro comes in to play. This special software works on Windows and Mac computer systems. Umate Pro, of course. the best tool to solve a problem such as “cannot authenticate the server.” Whether you are using an iPhone, iPod, or iPad, this tool can fix it in minutes. iMyFone Umate Pro comes with special features like one-click cleaning to save you time. In addition to this, Umate Pro comes with many other features to fix many bugs. Umate Pro can easily remove hidden junk files, temporary files, junk and other unwanted stuff. With this tool, you can enjoy a smoothly working email app on your iPhone again.

Remove and add your email address

Another main method that you can try to resolve is deleting and adding your email address. According to this particular method, you will have to remove the email address from the application and re-enter it. This will allow you to reset your email ID. But you don’t have to worry at all. Just because you delete your email account from your mail app, you won’t lose any email. Your actual email account will remain intact.

To remove an email account from your iPhone, you can go to the Settings app. Then you should go to Accounts & Passwords. After that, you should go to Accounts and find the email account that is currently causing some problems. Then you have to click on the account and click on the red button that says “Delete account”. This button is located at the bottom of the screen. Then you can click “Delete Account” when prompted for confirmation.

The corresponding account has now been removed from the Mail app. After completing this process, you must re-enter the same email account. To do this, go to the Settings app again and click on Accounts and Passwords. Then go to the Add Account option. Then you can select the postal service you are using and provide the required information.

What to do if your iPhone cannot authenticate the server?

What if you need to send an urgent email but is stuck only while browsing the iPhone cannot verify the identity of the server message? If you have faced such a situation, you are not alone. Many other iPhone users were disappointed to see such a notification. Well, if you need to know how to fix this problem, read on!

We all use a variety of emails these days for various purposes in our daily lives. Many of us use our iPhones to send and receive formal and personal emails. In fact, the combination of iPhone and email is a wonderful communication tool that makes our life convenient. However, in some cases there may be technical failures that interfere with uninterrupted communication. “The iPhone cannot authenticate the server.” one of the common problems you may run into at some point. Needless to say, announcing this problem can arise when you desperately need to send an email. “Unable to verify server identity” notification is displayed as a pop-up message.

My iPhone “Cannot Verify Server Identity“! Here’s The Fix!

From now on, let’s find out possible fixes if your iPhone is unable to check the server’s security. Over iPhone stuck on checkingying Update, Checking error on iPhone issues, please click to find out the best solutions.

What to do if Touch ID doesn’t work on iPhone. How I solved this problem on iPhone 6S Plus

Last week, they asked to see why Touch ID suddenly stopped working on the iPhone 6S Plus, with which fingerprint unlocking occurs. In the settings, on the “Touch ID and Passcode” tab, the previously entered fingerprints were not found, and the function of adding a fingerprint itself was not active. This behavior of iOS did not bode well for the owner and clearly indicated a hardware problem. However, everything ended well. but let’s, in order.

Why is Touch ID broken??

There are breakdowns that cannot be fixed in regular services. I will say more. Not all Apple Authorized Service Providers have the required hardware. Such breakdowns, first of all, include the replacement of the Home button starting with the iPhone 5S, that is, those devices where there is a fingerprint scanner.

If you wish, you can replace it yourself, but you won’t be able to keep the Touch ID working. The fact is that Touch ID is tied to the processor of the device and is unique for each phone. You can perform the necessary calibration after replacing the Home buttons only with the help of a special device Horizon Machine, which Apple provides to official service centers (in theory, they should be in each, but not a fact).

So, it is useless to solve the problem with a non-working fingerprint scanner by flashing or restoring the device from a backup. no miracle will happen. Most often, a similar problem occurs due to physical damage to the Home button cable (moisture, inaccurate assembly / disassembly of the device), or the cable is simply not fully installed during assembly.

As it turned out, the latter. exactly my case. It turned out that the problem with Touch ID appeared after replacing the battery in one of the unofficial services. Having disassembled the phone, it turned out that the home button cable was not fully inserted into the connector.

Having reconnected the cable, at the same time I checked the integrity of the cable itself (on the iPhone 6 / 6S, it is not uncommon for them to break at the base of the button). If you decide to climb inside the device yourself, before disconnecting any cables, turn off the phone and disconnect the battery cable. These are not pleasant moments thanks to the curvature of some masters.

If you find the article useful, do not be lazy to like and share with your friends.

BYRGPUB.COM 2021