iPhone does not see Bluetooth devices

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

Usually, the iPhone does not see the Bluetooth device due to the use of non-original wireless headsets or connection problems. Lack of access does not always indicate the presence of hardware problems, for the elimination of which you must contact a qualified technician. Before sending iPhone for repair, complete the network setup and check the availability of the connection.

If you cannot connect wireless headsets or activate Bluetooth due to wear or breakage of internal elements, then professional repair is required.

How to reset all settings

When the iPhone is frozen, there are often wireless problems as well. To restore the functionality of the smartphone, restart the gadget. After restarting the iPhone, all applications will close, the damage will be repaired, and the RAM will be cleared.

If Bluetooth stops turning on, try disconnecting and reconnecting it. Restart the system completely on both the accessories and the gadget. In more complex cases, it is recommended to reset all mobile phone network settings.

  • in the “Settings” menu, select the “General” category
  • find the reset tab
  • click on the “Reset network settings” button

Updating wireless settings does not delete content, but back up your data just in case.

If, after the reset, you cannot connect to available wireless networks, disconnect from the unresponsive device. To do this, turn off synchronization in the network settings. After a few seconds, try to find the connection again.

In some cases, Bluetooth may not respond due to the transfer of files containing viruses. To remove all malicious applications and documents at once, restore the software.

  • turn off the gadget
  • launch iTunes on PC
  • connect your smartphone to your personal computer
  • select a gadget in the program
  • click on the “Recover” tab
  • confirm action

You can restore software to iPhone not only via PC, but also via mobile Internet. The latest version of iOS is always available on the smartphone.

Why is the wireless connection not responding?

If the iPhone does not see a Bluetooth device, then the wireless network is not working properly. Most likely, Bluetooth stopped turning on for the following reasons:

iPhone can not find bluetooth devices [ Fix the pairing problem ]

  • the search for wireless networks is not functioning properly
  • the parameters are incorrectly set in the setup menu
  • mobile phone is frozen
  • defective headphones and other accessories
  • damaged bluetooth module

Pressing the button may also throw an error if the iPhone is overheated. Any temperature fluctuations will cause all applications to fail, so the wireless detection procedure may slow down.

Also, you will not be able to connect a headset or speakers if you use non-original accessories. Always select the devices that Apple recommends for your particular model.

Troubleshooting Hardware Problems

If, after a reboot, the wireless connections still do not work correctly, then the internal elements of the gadget are faulty. Damage to the modem, motherboard or antenna occurs due to mechanical damage or wear. In such cases, only qualified technicians will be able to find out exactly why Bluetooth cannot be connected.

Experienced craftsmen who specialize in the professional repair of Apple appliances are registered on the YouDo website. During the work, the Yuda performers use:

  • original parts
  • licensed software
  • modern tools recommended by the manufacturer

Experts guarantee that they will quickly determine why the iPhone does not see a Bluetooth device, and then accurately and efficiently eliminate the breakdown.

Kirill

Hello, there you need to install a special application for the iPhone so that the headphones can be connected and seen.

If you cannot pair your Bluetooth accessory

Learn what to do if you still can’t pair your Bluetooth accessory with your device.

Some iOS 8.3 users are unhappy with Bluetooth. Problems arise with connectivity to car systems, as well as wireless headphones and speakers. At the same time, some users report that gadgets work, but with errors.

In some cases, iPhones play music through the car audio system without problems, but cannot make or answer calls. How to solve the problem?

Unpairing a Bluetooth Accessory

To unpair a Bluetooth accessory, go to the Bluetooth Settings menu, select the accessory you want, tap the info button. and then “Forget this device.” This will remove the accessory from the list of available Bluetooth devices.

To add a Bluetooth accessory to your device again, put it in discoverable mode and repeat the steps above to pair it.

Evgeny

Good afternoon, it is difficult to answer exactly, you need diagnostics (free of charge), after diagnostics, we will identify the malfunction

iphone, bluetooth, pairing

Rebuild the device

If resetting the network settings did not help, you need to perform an operation to return the iPhone and iPad to its original state. reset the operating system. You can clean your mobile device through iTunes or using the OS itself. In the latter case, you need to go to the Settings. General. Reset menu. Various parameters are available here for “zeroing” the system. You can learn more about this here.

Alexandra

Good day. try restarting the device itself

Removing old devices

Your smartphone memory can be overloaded with old gadgets that you no longer use. Clean the list of devices from them. This can be done in this way:

  • Go to Settings. Bluetooth.
  • Click the “i” icon next to the device you are not using.
  • Select “Forget This Device”.

Remove all old devices in this way.

Doesn’t work on iPhone: One comment

I have original Airpods, my iPhone se does not see any Bluetooth devices at all. Headphones are displayed on other phones from which we can conclude that they are working properly. What should I do with this problem if neither resetting the network nor restarting helped.

There is also a problem with Wi-Fi, the phone sees all Wi-Fi and connects, but not to my home one. Tell me what to do with these problems.

Bluetooth is a technology for connecting devices that has been developing since 1994. Interface standards have changed, modern gadgets support communication at a distance of up to 400 meters. This method of wireless connection shows good results, but there are times when the iPhone does not see the Bluetooth device.

Bluetooth on Apple smartphones allows you to connect selfie sticks, wireless headphones and portable speakers, TVs, smartwatches, Mac computers and other equipment. A pair of devices works over a long distance without wires. Why can’t my iPhone find a Bluetooth speaker and other wireless devices? Let’s start with instructions on how to pair your phone with gadgets.

READ  How to add conversation sound on iPhone

Simple solutions

Often the problem can be solved with very trivial steps. You should always start with them when a problem arises. This will save you a lot of time, and the question of why Bluetooth does not work on the iPhone can be quickly resolved.

  • Check if wireless is turned on. This applies to both the smartphone and the connected gadget. The device should be put into pairing mode. To do this, you need to hold down the power button and hold it for up to 30 seconds.
  • Charge the battery. Wireless communication does not work well when the batteries are low on the devices. Better to charge them and try again.
  • Bring the device closer. This will eliminate the interference factor. Sometimes a wall or other wireless device can block the signal. The module may not “see” another device due to the long distance.
  • Turn off Bluetooth and turn it on again. Do this first on the phone, then on the second device.
  • Remove all accessories and optional devices from your phone, if applicable. This is especially true for non-original accessories.
  • Check the gadget on another smartphone or PC to see if it works correctly with other devices.

How to get a forgotten bluetooth device back on iPhone

Much to the delight of users, Apple has added a small but very useful and convenient feature in iOS 9 that allows you to quickly and painlessly disconnect your iPhone and iPad from a Bluetooth device connected to it.

Previously, in order to turn off, say, a wireless speaker, you had to go to the Bluetooth settings, select the device you want to disconnect, and click on “Forget this device.” Many active users of a Bluetooth headset spent a lot of time on this whole process, because you need to turn off the audio speaker every time someone calls.

HOW TO FIX BLUETOOTH AND PAIRING PROBLEMS IN IOS!

A new feature in iOS 9 allows you to simply unplug your Bluetooth device rather than “forgetting” it. To use it, you need to go to Settings on an iPhone or iPad running iOS 9 beta, tap on the Bluetooth screen, and then touch the icon to the right of the name of the device you want to disconnect. If there is no connection with a wireless device, only the “Forget this device” option will be displayed on the screen. After clicking on the icon, you need to select “Disable”.

The new feature is extremely convenient as it allows you to easily mute speakers and switch between multiple Bluetooth devices (for example, if you want to listen to music on headphones).

Bluetooth is a versatile technology that works well on both Android devices and Apple gadgets. However, I have run into the issue many times where Bluetooth is not working on the iPhone or is not functioning as it should. iPhone may not see a wireless device, drop connection, or be unstable. I will describe all the problems, their causes and solutions below.

How to connect iPhone and device via Bluetooth

Bluetooth on iPhone cannot find devices in some cases due to incorrect connection. Consider, how to connect wireless headphones to iPhone and other equipment.

  • Open smartphone settings, go to “Bluetooth”.
  • Set the switch to active position.
  • From the list, select the desired device and click on it.

Reboot and reset network settings

If Bluetooth stops working, slows down, gets lost or does not turn on at all, then first of all you need to restart the device. A regular restart will clean up RAM, delete temporary files, and fix minor temporary program errors. You also need to restart the gadget.

If this action does not help, you need to reset the smartphone network settings:

  • Go to Settings. General.
  • Select the “Reset” tab
  • “Reset network setting” item.

This will not delete data from the phone. the action is safe enough. However, I still advise you to make a backup of important information.

In the case when the normal operation of the module has not been restored, and the smartphone does not search for the network and devices, it is necessary to break the connection with the device that is not responding. To do this, go to network settings and disable it. Then, after a short pause, find and connect again.

Maybe the reason is not your phone.

Try pairing your gadget with any other iOS device (iPad, MacBook, iPod or other iPhone). If everything works, then the problem is with your iPhone.

If you have another Bluetooth accessory of the same type, it is worth checking to see if it will work with your iPhone. If that doesn’t work, then the problem might be with your accessory.

Restart Bluetooth

It’s amazing how many problems a method to turn a feature on and off can solve.

  • Swipe up from the bottom of the screen to bring up the Control Panel.
  • Click the Bluetooth icon to disable the function.
  • Touch the Bluetooth button again to enable this function.

Alternatively, you can follow the same steps, but by pressing the Airplane Mode button, to turn off all Bluetooth, Wi-Fi and connectivity and then turn them back on.

After that, try connecting to the desired device again. If it didn’t work, then move on.

Remove old devices

If your smartphone contains old devices that you no longer use for Bluetooth syncing, then deleting them correctly can help.

  • Open “Settings”.
  • Click “Bluetooth”.
  • Click on the Info icon (i) next to the device name you want to forget.
  • Click “Forget this device” and confirm.

When the old devices are removed, try to reconnect. If the problem persists, then go to the next step.

Hard reset

The next thing to try. it is iPhone hard reset.

  • Swipe up from the bottom of the screen to bring up the Control Panel.
  • Disable Bluetooth function.
  • Do a forced / hard reboot. You can find out how to do this on different iPhone models in another article: “How to restart an iPhone”
  • Wait until the smartphone restarts.
  • Swipe up from the bottom of the screen to bring up Control Center again.
  • Turn on the Bluetooth function.

Try connecting your smartphone to the device again. If there are no improvements, then move on.

How to Fix iPhone Bluetooth Connection Issues?

If your iPhone won’t connect to other devices and accessories via Bluetooth, here are some tips to help fix it.

There are several ways to troubleshoot Bluetooth connection problems that you can do before contacting a service center. The fact is that this problem most often lies in the software, and a few simple steps can fix it.

Service center

If you have an iPhone, iPod, or iPad that you couldn’t connect to your Bluetooth accessory or other device. And none of the above methods helped to fix the situation. Then, we recommend contacting our service center:

  • 7-978-844-48-47;
  • Mon-Sat: 9:00. 20:00;
  • Sun: 10:00. 16:00.

How to connect a speaker to an iPhone phone

Many iPhone and iPad owners would like to connect their device to a Bluetooth speaker, since they are gaining popularity all over the world at a tremendous speed, and there is no headphone jack on new iOS devices. Apple aims to lure us into the wireless world of which Bluetooth speakers are a part.

It’s pretty easy to connect a Bluetooth speaker to your iPhone or iPad. It may not be as easy as plugging the cable into the headphone jack, but nonetheless. Below we will explain how this is done.

For the instructions, we used a portable Bluetooth-speaker “JBL GO”, but the method will be the same for other speakers.

How to connect iPhone and device via Bluetooth

Bluetooth on iPhone cannot find devices in some cases due to incorrect connection. Consider, how to connect wireless headphones to iPhone and other equipment.

  • Open smartphone settings, go to “Bluetooth”.
  • Set the switch to active position.
  • From the list, select the desired device and click on it.
READ  Put a song on iPhone call via iTunes

How to connect a speaker to an iPhone or iPad

  • Wait for the iPhone or iPad to find the Bluetooth speaker. It will appear in the “Other Devices” section. Then click on the column name.
  • Wait while the device connects to the speaker. After that, it will appear in the “My Devices” section, and next to it will be the word “Connected”.
  • Now you can close the Settings. The bluetooth speaker will output audio from your device from now on.

That’s all, you connected a portable Bluetooth speaker to your iPhone or iPad!

The speaker will now output audio from the device by default, as long as it is not too far away, or until you disconnect the speaker from it.

To disconnect a portable speaker from your device, you just need to turn it off, do it in Settings in almost the same way as we connected it, or just turn off Bluetooth.

It is also worth reading how to switch the audio source on iPhone during phone calls. If a speaker is connected to the smartphone, then the audio of calls, most likely, will be output through it, and not through the speaker of the smartphone. If you have a car with Bluetooth, then you probably faced a similar problem (autoplay music).

Bluetooth speakers are very convenient as you can control your music from anywhere and you don’t need to use any wires. Of course, Bluetooth technology isn’t just limited to audio output. You can connect a keyboard, headphones or other accessories to the device.

Don’t miss the Apple news. subscribe to our Telegram channel, as well as to the YouTube channel.

Bluetooth is a technology for connecting devices that has been developing since 1994. Interface standards have changed, modern gadgets support communication at a distance of up to 400 meters. This method of wireless connection shows good results, but there are times when the iPhone does not see the Bluetooth device.

Bluetooth on Apple smartphones allows you to connect selfie sticks, wireless headphones and portable speakers, TVs, smartwatches, Mac computers and other equipment. A pair of devices works over a long distance without wires. Why can’t my iPhone find a Bluetooth speaker and other wireless devices? Let’s start with instructions on how to pair your phone with gadgets.

Reasons Why iPhone Can’t Find Bluetooth Devices

Problems when connecting gadgets can be associated with hardware problems or software glitches.

The first reason is not smartphone related. Bluetooth connection is not enabled on the device. In most cases, to change the mode, the speakers have a button that switches playback from a flash drive, radio and Bluetooth. Try to hit the key.

The second reason. If iPhone is not looking for Bluetooth devices, sometimes problems appear due to low battery levels. One (or both) of the gadgets is not sufficiently charged and the equipment does not have enough voltage to connect. Make sure that the battery level on the devices is normal. If necessary, charge.

The third reason why the iPhone does not find the Bluetooth speaker, or the pairing fails, may be due to a software error. The solution is simple. “forget” the device in the smartphone settings.

  • Go to “Settings”.
  • Select the “Bluetooth” tab.
  • Click on the exclamation mark in front of the column, then. “Forget this device”.

Sometimes the problem is solved by simply rebooting the phone. Perhaps after that he will see the column, look for other devices.

The fourth reason why the iPhone does not find the speaker via Bluetooth is a hardware malfunction of one of the devices. If Bluetooth does not turn on on iPhone, chances are that the part is defective. To confirm this, try connecting the device to another phone, and another speaker to yours.

If the problem is confirmed, you can do reset (remember to create backups). The problem remains. contact the service center, they will replace the defective parts. After repair, the interface will turn on and work.

Fifth reason. There are frequent problems when the phone cannot connect to wireless headphones, printer, monopod, TV, and other multimedia devices. Most of the problems are similar to those when the smartphone has no connection to the speaker. In some cases, the problem appears due to incompatibility of hardware versions.

Why is it important? An old phone model may not connect correctly with devices, not find them due to technical limitations. In this case, only the selection of suitable models of wireless equipment or the purchase of a new smartphone will help.

Our experienced team of editors and researchers contributed to this article and reviewed it for accuracy and completeness.

The wikiHow content management team closely monitors the work of the editors to ensure that each article meets our high quality standards.

This article will show you how to connect Bluetooth speakers to your iPhone so you can play music or other sounds through them.

Alexandra

Good day. try restarting the device itself

Andrew

Good day! Try to remove the connection and reconnect.

If you cannot connect to one of the following devices

To pair a Bluetooth accessory (such as a wireless keyboard) with your iOS or iPadOS device, try the following steps.

  • On your iOS or iPadOS device, go to Bluetooth Settings and make sure Bluetooth is turned on. If you can’t turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad, or iPod touch. Then try pairing and connecting again.
  • Make sure the Bluetooth accessory and the iOS or iPadOS device are close to each other.
  • Turn the Bluetooth accessory off and on again.
  • Make sure the Bluetooth accessory is turned on and fully charged or connected to a power source. If the accessory uses batteries, check to see if they need to be replaced.
  • If you are using an app with your Bluetooth accessory, select Settings Bluetooth Privacy on your iOS or iPadOS device and make sure the Bluetooth setting for that app is turned on.

Alexander

Good day! It is necessary to diagnose, if the device is new. contact the warranty service. Because the problem may be in the board itself.

Setting up Bluetooth on iPhone

Before buying any device, make sure it is generally compatible with your iPhone model: headphones that worked with the 4S may not pair with the 6 Plus. If there are no problems with compatibility, proceed with setting up the connection:

  • Activate Bluetooth on the device you want to connect to iPhone. Look in the instructions for how to do this. by pressing a special button, entering a password, etc.
  • Open the iPhone settings and go to the “Bluetooth” section. Slide switch to active position.

Scanning of the surrounding space will begin (the range of the technology is about 10 meters, it is better to place the devices nearby) If the device is not found, check that you have correctly turned on Bluetooth on it and search again.

Check the iPhone’s status bar to make sure the accessory is connected. If the Bluetooth icon is blue or white, then the device is connected and working correctly. If the icon is gray, the accessory could not be found.

Hardware errors

If other methods do not work, then the phone may have been damaged. It will cause a lot of problems in which Bluetooth on the iPhone does not find a device. Damage may result from shock, short circuit, moisture or overheating. Also, a malfunction of internal elements can occur due to wear.

In the iPhone, all wireless technologies are structurally connected, so problems with Wi-Fi, Bluetooth and Internet connection overlap with each other. You should contact the service center. There, specialists will check the iPhone, identify the cause of the physical problem, and replace it if necessary. The cause of the malfunction may be in the antenna, Wi-Fi chip, motherboard.

READ  iPhone 11 can't see SIM

So, what if you can’t connect Bluetooth on iPhone? Be calm and follow step by step from this instruction. Sooner or later, the problem will be resolved. The iPhone is a reliable gadget, and from iOS 3.1 and iPhone 4, it supports Bluetooth. Therefore, your problem will definitely be solved.

How to fix Bluetooth issues in iOS 13

Disable bluetooth and do a forced reboot

First, turn off Bluetooth via Bluetooth Settings using the toggle switch.

Force restart your iPhone. On iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, and iPhone 11 Pro Max, a forced reboot is done as follows:

  • Quickly press and release the Volume Up button.
  • Quickly press and release the Volume Down button.
  • Hold the Side (Sleep / Wake) button until the Apple logo appears on the screen.

On iPhone SE, iPhone 6s, iPhone 6s Plus, iPhone 7, iPhone 7 Plus, iPhone 8, and iPhone 8 Plus, simultaneously hold down the Home button (on iPhone 8 and iPhone 8 Plus, the Volume Down button) and the Power button until the logo appears on the screen Apple.

After your iPhone restarts, turn Bluetooth back on via Control Center or Settings.

Try connecting to the accessory again. If the problem is not resolved, go to the next method.

If the previous method did not work, try to forget all connected devices, and then reconnect them.

  • Open Settings and go to the Bluetooth section.
  • Click on the “i” icon next to the name of the device with which you are having problems.
  • Click “Forget device” and confirm your action.
  • Now try reconnecting it.

This method should solve the problems with cutting and stopping tracks.

Reset network settings

If none of the previous methods helped, you can try resetting your network settings. This action will also reset all Wi-Fi settings, so you will have to connect to networks and configure the VPN again.

  • Open Settings, go to General Reset.
  • Click Reset Network Settings.
  • You will need to enter a password.
  • Then confirm your action.

Your iPhone will restart. When it turns on, try connecting the device to it again.

Restore iPhone and set it up again

This is not the best solution, but if none of the previous ones helped, you will have to turn to it. You need to restore your iPhone via iTunes and set it up again. This will erase all of your settings that may have been causing the problem. Read more about this in the instructions below.

Contact a specialist

If, after all this, problems still arise on your device, then you should contact a specialist. Perhaps the problem is in the details of the smartphone.

Don’t miss the Apple news. subscribe to our Telegram channel, as well as to the YouTube channel.

If your iPhone won’t connect to other devices and accessories via Bluetooth, here are some tips to help fix it.

There are several ways to troubleshoot Bluetooth connection problems that you can do before contacting a service center. The fact is that this problem most often lies in the software, and a few simple steps can fix it.

Hard reset

The next thing to try is hard resetting your iPhone.

  • Swipe up from the bottom of the screen to bring up the Control Panel.
  • Disable Bluetooth function.
  • Do a forced / hard reboot. You can find out how to do this on different iPhone models in another article: “How to restart an iPhone”
  • Wait until the smartphone restarts.
  • Swipe up from the bottom of the screen to bring up Control Center again.
  • Turn on the Bluetooth function.

Try connecting your smartphone to the device again. If there are no improvements, then move on.

Simple solutions

Often the problem can be solved with very trivial steps. You should always start with them when a problem arises. This will save you a lot of time, and the question of why Bluetooth does not work on the iPhone can be quickly resolved.

  • Check if wireless is turned on. This applies to both the smartphone and the connected gadget. The device should be put into pairing mode. To do this, you need to hold down the power button and hold it for up to 30 seconds.
  • Charge the battery. Wireless communication does not work well when the batteries are low on the devices. Better to charge them and try again.
  • Bring the device closer. This will eliminate the interference factor. Sometimes a wall or other wireless device can block the signal. The module may not “see” another device due to the long distance.
  • Turn off Bluetooth and turn it on again. Do this first on the phone, then on the second device.
  • Remove all accessories and optional devices from your phone, if applicable. This is especially true for non-original accessories.
  • Check the gadget on another smartphone or PC to see if it works correctly with other devices.

Possible problems and ways to solve them

First, decide on the problem: how exactly does Bluetooth “not work” on your smartphone? There are not many options here:

  • Bluetooth won’t turn on at all on iPhone.
  • Search for networks does not work properly.
  • iPhone does not see Bluetooth devices.
  • iPhone sees gadgets, but does not connect to them.
  • Device freezes during Bluetooth operation.

The situation when the iPhone cannot see the iPhone via Bluetooth is not a problem. This is a built-in feature of Apple products that protects iOS from viruses. Therefore, you will not be able to connect your iPhone via Bluetooth to another smartphone. However, from version 7 of iOS there is an AirDrop service that replaces this feature.

So, in order to solve the listed problems, you need to do a number of simple steps, starting from the most obvious.

Maybe the reason is not your phone.

Try pairing your gadget with any other iOS device (iPad, MacBook, iPod or other iPhone). If everything works, then the problem is with your iPhone.

If you have another Bluetooth accessory of the same type, it is worth checking to see if it will work with your iPhone. If that doesn’t work, then the problem might be with your accessory.

IPhone bluetooth pairing fails when connected

The iOS 13 update brings dozens of new features and changes, including Dark Mode, a new photo and video editor, updated Reminders, Maps, and more. However, along with this, the new version also contains problems. The most common problems are with Bluetooth. Below we will show you how to solve them.

Here are some of the most common Bluetooth issues on iPhones running iOS 13:

  • Bluetooth connection not available or specific Bluetooth accessories not available.
  • Audio sounds poor and choppy when connected to accessories.
  • Bluetooth accessories are not found by the device.
  • Some tracks are interrupted or skipped when connected to Bluetooth accessories or Airpods.

The first thing you need to do is make sure that the problem is with your iPhone and not with the accessory itself. To do this, try connecting the accessory to other devices.

Service center

If you have an iPhone, iPod, or iPad that you couldn’t connect to your Bluetooth accessory or other device. And none of the above methods helped to fix the situation. Then, we recommend contacting our service center:

Bluetooth is a versatile technology that works well on both Android devices and Apple gadgets. However, I have run into the issue many times where Bluetooth is not working on the iPhone or is not functioning as it should. iPhone may not see a wireless device, drop connection, or be unstable. I will describe all the problems, their causes and solutions below.

BYRGPUB.COM 2021