Table of Contents

Reset settings and content

Back up your device before performing a factory reset or content reset. Otherwise, after the reset, you will lose personal files that were stored in the iPhone memory.

  • Open the “General” section in the settings.
  • Select “Reset”.
  • Click “Erase Settings and Content”.

After the reset, restore the data from the backup and check if the camera is working.

Ways to fix the error

On the official Apple support page, the following guidelines are given to remove the black screen when turning on the camera:

  • Make sure nothing is blocking the lens. If the mobile device is in a non-original case, remove it and check if the camera works.
  • Force quit the Camera app.
  • Restart your device and try turning on the Camera app again.
  • Switch between the main and front cameras several times. If the display remains black when both modules are activated, contact the service center.

Of the listed methods, a separate explanation requires a forced termination of the program. To execute it:

    Double click on the Home button to bring up a list of recently used programs.

If the methods described on the Apple support page did not help you, then try the methods described by users who have encountered a similar problem: their iPhone also does not have a black screen camera.

Troubleshoot iPhone camera problems

If your iPhone is not working with a black screen, the problem may be due to a software error or hardware damage to the device. You can fix the problem yourself, but if the above methods did not help, contact the service center.

User methods

A large number of iPhone owners have faced problems with the camera. Sometimes errors appeared after updating the device and disappeared after the developers made corrections. But more often the problem is individual. However, most users agree on how to fix it.

Enabling and disabling power saving mode

Power saving mode appeared in iOS 9. The device prompts you to switch to it when the battery charge drops to 20%. The mode also turns off automatically as soon as the battery is charged to 80%. Forum users report that forcing power saving on / off removes black screen when camera starts.

  • Open the settings, go to the “Battery” section.
  • Slide the Power Save Mode switch to the On position.
  • Wait a few minutes, go to settings again and turn off power saving.

If this method does not help, move on to other methods.

Hardware faults

If the listed methods do not help, you will have to climb inside the device. It is not recommended to do this without the necessary experience. The maximum that can be done in this case is to gently push the lens. If a black screen is displayed due to the lack of contact of the camera module with the ribbon cable, then this may help.

iPhone 8 plus Rear Camera not working!Back Camera blank screen fix.

It is better to entrust the check of the loop and the camera itself to specialists from the service center. Even if there is no visible damage, simply removing and reinstalling the ribbon cable can fix the problem.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

Problem iPhone cannot take photo error

When your iPhone’s rear camera is down and you see the “can’t take photo” error, it’s usually a storage issue. Below are some things you can try to troubleshoot this error.

Instead of using the default iPhone camera app, download it from the App Store. This is a temporary fix that will allow you to take a small amount of photos, but it will fix the error.

iphone, camera, working

Open the Settings app and select General iPhone Storage. In this menu, you will be able to see which applications are taking up the most of the iPhone’s memory. Several ways to free up storage space: Move your photos and videos to your computer and delete them from iPhone, uninstall some apps, and delete old texts and emails.

It should go without saying that deleting multiple texts and emails doesn’t really matter. However, if you write to someone a lot, your chat history will start piling up.

IPhone Blurred Camera Problem

The last problem we are going to solve. this is if you have a blurry iPhone camera. Below are some of the solutions we found that might help fix this.

Use a clean towel to clean the camera lens.

Force close all other open applications.

Open the “Settings” app, go to “General Reset” and select “Reset all settings”.

When you take a photo, change the camera mode to “Auto”.

Cleaning the lens may seem obvious, but it will surprise you how many people touch these lenses without realizing it or adding smudges to them.

Problem Camera app missing

While it’s unclear, your iPhone‘s camera isn’t working, possibly due to the lack of the app itself. This is usually the result of human error and therefore you can easily find and fix the problem. Here are two possible fixes:

Use the search function to find the camera app in case you’ve accidentally moved the app.

Go to Settings General Limitations and check if the Camera app has a limitation. If so, tap the slider and enter your password to disable camera restrictions.

If you have not previously enabled restrictions, it is unlikely that this will be the cause. But, if you’ve used this iOS feature, this may be why the iPhone’s front camera isn’t working.

How to fix iPhone camera not working

Apple has been at the forefront of technology since the release of the iPod Touch. Since then, they have done nothing but surprise us with their innovative products over and over again. The sleek design, flawless performance and overall functionality of Apple products. it’s just fantastic. But recently there have been some complaints about the iPhone camera not working.

Some people choose to use their iPhone primarily for taking photos, and as such, camera problems can be frustrating. There are many different camera issues that you as an iPhone user may encounter, and as such, we’ll show you how to fix them.

PS: for people who have problems with FaceTime camera not working or Android camera not working, here are the best solutions for you.

General fix for iPhone camera not working

Is’ iPhone camera not working ‘or’ iPhone front or rear camera not working Still bothering you? Don’t worry, even if none of these fixes fix your iPhone, there is one final fix you can try. iMyFone Fixppo iOS System Restore can fix most iPhone problems in just a few minutes, including “iOS 11 notifications not working”, iPhone emails disappeared, Mac camera not working, iPhone red screen of death question and Apple music crashing. There is nothing complicated about this solution, and no matter what iPhone you have, you can use this program. How to use iMyFone Fixppo (iOS System Recovery).

Use the steps below and you can use iMyFone Fixppo iOS System Restore to fix ‘iPhone camera not working’ ‘iPhone rear camera not working’. All this takes a few minutes of your time and a little patience.

Step 1. Download iMyFone iOS System Recovery on your computer and install it.

Step # 2. Connect your iPhone via USB cable and run the program to start.

Step # 3. In the main menu, you must select “Standard Mode”. If this method is not successful, then you can try “Advanced Mode” using the same steps.

Step # 4. Put iPhone into DFU mode using the on-screen instructions. Be sure to select the specific iPhone you have so the correct instructions are displayed.

Step # 5. When your iPhone is in DFU mode (or recovery mode), some information about your device will be displayed. Make sure the information is correct and click “Download” to continue.

Note: if you believe that any information is incorrect, you must amend it accordingly.

Step # 6. iMyFone Fixppo iOS System Recovery will download the required firmware and then click “Run”.

Step # 7. A new iOS firmware issue will now be installed on your iPhone to fix the issue.

As we said, if standard mode does not solve the problem, then Advanced mode try This mode will destroy all your personal data, although it will most likely fix the problem at hand.

One of the great things about iMyFone Fixppo iOS System Recovery is that for any issues you encounter, be it an iPhone camera or a device stuck on the Apple logo, this program can fix it for you.

READ  How to make interest on iPhone 11

IPhone camera not focusing problem

When you take a photo with the iPhone camera, focus is not always a requirement. Some people use this feature out of habit, while others use it to enhance the quality of their photos. However, failure to focus the camera can significantly reduce the quality of the photo. Here are some tips to fix this problem.

Click on the area you want to focus on more than once. You can also try tapping lightly as the touchscreen can be a problem.

Turn off your iPhone, wait a few minutes, then turn it back on. This will reboot iOS, which will check that it is installed correctly, and if not, then this will be fixed.

Focus problems are usually hardware-related and therefore you may have to fix the issue yourself. Obviously some of these fixes won’t hurt.

Camera app freeze issue when switching between front and rear camera

Is your iPhone’s front camera not working when switching between front and back? Or maybe the rear camera isn’t working? This is, unfortunately, fairly common among newer iPhone models. 3 general fixes for this:

Force restart iPhone by holding the Volume Down and Power buttons until the Apple logo appears.

Open the “Settings General Restrictions” menu and turn on the “Camera” slider.

Double-click the Home button and swipe up on the Camera app to close it.

Again, this is relatively easy to fix. If they don’t work, reinstalling the firmware by performing a factory reset may be worth trying.

Major iPhone camera software fixes

If you run into any oddities with iPhone camera not working, it is recommended that you try some general software troubleshooting tips. Test your iPhone camera again after each of the tips below.

  • Close all applications on your iPhone.
  • Reboot your device.
  • Update iOS by going to Settings General Software Update,
  • Go to Settings General Reset Reset All Settings.This doesn’t delete any of your content like photos or apps, but it resets all iPhone settings.
  • Finally, resetting your iPhone

and set it up as a new device. This erases everything and is a last resort, but should fix any software issues that are preventing your iPhone camera from working.

Major iPhone camera hardware fixes

If you’ve tried all of the above and your iPhone’s front or rear camera still isn’t working, you might have a hardware issue. Try the troubleshooting below to fix this:

  • Double check that the camera is not covered by a case or sticker.
  • Make sure the camera lens is free of smudges, dirt, or debris. Stains and fingerprints should be easily wiped off with a microfiber cloth.
  • Contact Apple Support to arrange for hardware repairs at an Apple Store or an Apple Authorized Service Provider. If your iPhone is out of warranty, you may have to pay for this repair yourself.

min

You wouldn’t buy a new smartphone if it didn’t have a camera on it. So what’s good about your iPhone when the camera isn’t working?

Here are the most common problems you may encounter with your iPhone camera, as well as everything you can do to fix them.

IPhone camera flash not working

While most photos look better without flash, sometimes you need this extra light for dark conditions. If your iPhone isn’t working, try these tips:

from the Control Center.

  • Make sure you set the flash to On or Auto in the Camera app. To do this, tap the lightning bolt on the left side of the screen to see flash options (you can’t use flash for panoramic photos or time-lapse videos).
  • Be careful when using the flash for long videos or in hot environments. If your iPhone gets too hot, it can turn off the flash completely until it cools down again.
  • Camera app is missing or freezes

    If you can’t find the Camera app on the home screen, or the app freezes when switching between cameras, it might be due to a limitation on your iPhone. You can check this in the Screen Time settings:

    • Go to Settings Screen Time & Privacy Restrictions,
    • Click on Allowed Apps and enter your Screen Time password, if you have one.
    • Make sure you turn the camera app on; The switch should be green.

    iPhone photos turned upside down incorrectly

    This problem often occurs when you rotate iPhone horizontally to take a landscape photo. After taking a photo, it reverts to portrait orientation in your photo library. Try these tips to fix it:

    • Open Control Center on your iPhone and tap the lock icon with a circle around it to turn off Rotation Lock.
    • To open Control Center, swipe down from the top-right corner on iPhone X or later, or swipe up from the bottom of the screen on iPhone 8 or earlier.
  • Before taking a photo, make sure the icons in the Camera app are rotated to the new horizontal position. If not, rotate iPhone back and forth until they do.
  • You can always edit your images later from the Photos app or other third-party iPhone image editing apps.
  • ,

  • If you’re wondering why your selfies always look mirrored, Apple just designed the front-facing camera. The camera works like a mirror, but the photo flips, as if someone took it for you.
  • Photos on iPhone are blurry or out of focus

    If photos taken with the iPhone camera are blurry or out of focus, try the following fixes:

    • Make sure the front and rear camera lenses are clean. Wipe off stains or fingerprints with a dry microfiber cloth. If you see dirt or debris behind the glass, take your iPhone to an Apple Store or Authorized Service Center for repair.
    • Remove all metal or magnetic iPhone cases and camera accessories. They can interfere with optical image stabilization on iPhone 6S Plus, iPhone 7, iPhone X, or later iPhones. This may explain why the camera is not working.
    • If the Camera app says AE / AF Lock at the top of the screen, tap an empty spot to re-enable autofocus. You may have accidentally locked focus by pressing and holding in the Camera app.
    • Keep your hand still while pressing the shutter button. Sometimes it’s easier to press one of the volume buttons to take steady shots. Be careful in the dark when the shutter needs to stay open longer.

    IPhone rear camera not working

    Select the device that needs repair:

    Nowadays, it is difficult to argue with the fact that the invention of Steve Jobs. iPhone or iPhone. is one of the most popular smartphones in the world. Almost every owner of a “smart” device cannot but boast of his purchase on social networks and live. These mobile devices are distinguished by a rather high cost, therefore, at the slightest problems, they are taken to service centers for repair.

    If the rear camera does not work in the iPhone (iPhone), then there may be several reasons for this. The most common among them are falling or getting moisture into the device.

    IPhone (iPhone) rear camera not working, what to do?

    If the rear camera does not work in your favorite iPhone (iPhone), then most likely, it is unlikely that an ordinary user will be able to fix the cause on his own. Sometimes the iPhone won’t even launch the Camera app. In this case, the failure may be due to a lack of RAM. Therefore, to take a picture, you need to close all applications and games, thereby reducing the load.

    Also, a simple reboot of the smartphone sometimes helps to get the camera back to work. Optionally, this can be done through iTunes, returning to factory settings. You also need to know that in some cases this problem can be solved by deleting the catalog with photos. Deleting this folder returns the iPhone camera to work.

    In any case, you can try all the suggested actions. If these tips do not help, then, most likely, the problem is hardware and you simply cannot do without service help. Quite often, iPhone diagnostics indicate that you still need to change the camera itself. And this can only be done by experienced craftsmen.

    The main symptoms of a malfunction in the operation of the rear camera:

    One of the most common problems with rear camera breakage is physical damage. Since the main camera reliably adjoins the communicator cover, any damage to the case can affect it. In this case, the glass on the eye may remain intact, but its replacement may still be required. Exception: slight concussion that was received during the impact. The camera cable will simply lose contact, then you will have to go to our Apple-SAPPHIRE service center to correct it.

    An equally common cause is fluid leaking into the interior of the device. There are a lot of potential paths for its penetration: from the audio input to the microphone hole and speaker grill. But the consequence for any option will be the same: moisture will get to the contact area of ​​the rear camera, after which it will settle in the form of oxides. As a result, this will disable not only the camera, but the entire smartphone.

    As in the situation we have analyzed above, only a complete replacement of the rear camera will help. It will be almost impossible to restore the old camera. In addition, you will have to remove traces of electrochemical corrosion, otherwise the smartphone will face other troubles.

    In the simplest cases, the duration of iPhone repair is from 30 to 40 minutes. This time difference is directly related to the features of the configuration of various generations of devices. Therefore, to get to the rear camera, you need to remove the display module. But most of the time is usually taken up by disassembling / assembling a smartphone. On the replacement itself, our masters will spend no more than 10 minutes.

    Why customers choose us:

    IPhone repair in our service center in most cases is carried out in front of the owner and takes from 10 minutes to 2 hours.

    • Original components.

    We work directly with the manufacturer and offer our customers original components, the price of which is included in the cost of repair.

    • High quality.

    Smartphone repairs are carried out under strict quality control, which guarantees flawless operation and that you will not face such problems in the future.

    • Certified masters.

    We employ only experienced specialists. Trusting the technician to us, you can be completely sure that the repair will be carried out at the highest level.

    • Modern equipment.

    We have branded equipment, which allows us to make repairs of higher quality and faster.

    READ  Put a song on iPhone call via iTunes

    No matter how difficult the floor is, you can familiarize yourself with the cost of repairs directly on our website.

    Unlike many of our competitors, we provide a repair warranty, as well as all components that have been replaced.

    Camera (black screen) and flashlight not working in iPhone. how to fix?

    Hey! Just recently, I had to update an iPhone 5S on iOS 10 to one friend and everything would be fine, but then I would not write this article 🙂 In general, the next day he came to me and said literally the following: “Apple is all scoundrels They artificially make devices obsolete. they force them to buy new ones. Look, after the update, my rear camera stopped working (there is now always a black screen), and the flashlight does not turn on, it constantly writes about some kind of overheating, although the device is completely cold “.

    I can certainly believe that Apple is somehow being forced to buy their new gadgets (for example, adding new chips). But not as barbaric. a simple update breaking cameras. Therefore, it was decided to try to correct this ailment and it worked! How? I’ll tell you now, let’s go!

    From the outset, it should be noted that with regards to this problem, the rear camera and flashlight are dependent on each other. The camera will show a black screen, and when the flash is turned on, it will say: “Flash is off. Cooling is required before using the iPhone flash. ” This is, so to speak, the main symptom.

    So, first of all, I climbed to look and see what people write about this. It turns out that the Apple forum already has a whole thread dedicated to this ailment. And there will be enough such “lucky ones” (with the camera not starting after the update) for the whole town. True, it mainly deals with the iPhone 5, but the 5S, as well as other gadgets on iOS, are also mentioned. Here are some tips and actions we managed to spy on. after completing them, the camera worked again for some:

    • Enable or disable power saving mode (how to do this?).
    • Switch cameras (from front to back) several times. Until the black screen disappears and it starts to turn on.
    • Apply a little pressure around the camera (very carefully!).
    • Close all applications that might be using the camera and try again.

    If it does not help, then we proceed with the standard set of Apple technical support tips designed to eliminate any error related to the iPhone and iPad:

    • We do a hard reset of the gadget. How? The answer is here!
    • Full reset of content and settings.
    • Restoring the latest current firmware via DFU mode.

    If this does not help, then you will have to climb inside the gadget.

    In the event that the device is under warranty, do it yourself oh how it should not.

    If the skills of assembly and disassembly are not alien to you, then we check and turn on / off:

    • Camera loop.
    • Battery.

    Perhaps they just moved away after a fall or other blow. If the phone is unofficially restored, reassembled, or has undergone some kind of “handicraft” repair, then very often it can be noted that there is no special film on the cables, which allows you to securely fix the cable in the connector. And at the slightest fall, it just falls out.

    Even if everything is in place and it seems to you that they are firmly installed to the end, to solve the inoperative flash and black screen when starting the camera, you need to pull them out and insert them. Yes, a simple reconnection is enough in most cases.

    It should be noted here that a friend bought an iPhone 5S on the market and who, how, and from what assembled it. we naturally do not know. In any case, if on the previous version of iOS this did not prevent the camera from starting normally, then after the update something went wrong and instead of the subject we saw a solid black screen.

    I hope that you will not get to the point of disassembling the device and making the camera with a flashlight work in other, simpler ways. Although there is nothing difficult in the last version, you just need to act carefully and not break anything else! 🙂

    No sound when recording video on iPhone or iPad

    If you encounter a problem in which the iPhone or iPad stopped recording sound during video shooting, or began to record it extremely quietly, then in most cases this is due to the blocking of the microphone on the back of the device. It is this microphone that is used during video recording.

    Check if the microphone hole is clogged with dirt and if it is covered by a protective film, glass or case.

    Upside down photos

    A common problem with horizontally oriented photographs. When loading such images, they are turned upside down.

    This often happens when taking a photo using the volume up button. In this situation, try the following:

    • Take a horizontal photo using the volume down button. This is due to the sensors of the iPhone (iPad) and the way they are programmed to put metadata into the image.
    • You can also edit the picture on your phone to make sure it is in the correct orientation, or change it on your computer using a photo editor.
    • Third party apps like Camera can fix the metadata encoding issue by making the image orientation always correct. At the same time, such programs do not start so quickly.

    Camera not working on iPhone or iPad: common problems and solutions

    Most iPhone or iPad owners use them to take great photos. Having a smartphone or tablet with you, you want to be sure that their stock camera will not let you down at the right time. However, sometimes it happens that the camera in the iPhone or iPad does not work correctly, which may be due to both software and hardware “stuffing” of the device.

    Listed below are some common camera problems on iPhone or iPad and how to fix them.

    Flash does not work on iPhone or iPad

    While photos tend to look better without flash, sometimes extra light is needed. If your iPhone’s flash doesn’t work, try the following:

    Check if the flash works when you turn on the Flashlight app.

    If it doesn’t work, restart your device. If it does not help, alas, in this case you need to contact the service center.

    Make sure your device is set to the desired flash mode (Auto, On, or Off) by tapping the lightning bolt icon in the upper left corner of the screen in the Camera app.

    Be careful when using the flash when shooting video or in high temperatures. If the device gets too hot, the flash will automatically turn off until it cools down.

    Black screen when launching iPhone or iPad camera

    A black screen is displayed when launching the built-in (or third-party) camera application. In this situation, try the following:

    • First of all, make sure nothing is blocking the camera lens. You may have fitted the case incorrectly or something is covering the camera hole.
    • Close (unload) the Camera app (swipe up on the app card in the multitasking bar) and then try launching it again.
    • If this method does not work, try restarting your device and restarting the camera. Also try switching between the front and rear cameras to see if a black screen appears on both. If the problem is with only one of them, you may have to take the device to an Apple repair service.

    Camera app not found or freezes when switching between cameras

    If you’re having trouble finding the Camera app on your home screen, or it freezes when you try to switch between cameras, it might be due to your restriction settings.

    Open “Settings” → “General” → “Restrictions”.

    Starting with iOS 12 (Settings → Screen Time → Content and Privacy → Content and Privacy → Allowed Programs).

    Make sure the switch for the camera is on (green).

    Ways to fix iPhone camera not working after updating to iOS 12

    No matter how fine-tuned the operating system of your mobile device is, it is always possible for an accidental error to appear due to poor interaction between different applications or simply a system failure. Most users have had a problem with a non-working camera at least once, and, of course, you need to know in what ways you can fix it. And it’s even better to prepare for such troubles in advance, and in our article we will show you exactly how.

    Force restart an iOS 12 device

    a fairly effective method for resetting many errors. The procedure is similar for all iPhone models, but differs in the combination of buttons due to design features:

    For versions of iPhone 6s and older models, as well as on iPad and iPod touch, you need to simultaneously hold down the Home button and the side button until the restart and the Apple logo appears;

    How To Fix iPhone 8 Rear Camera Not Working. Motherboard Repair

    Press and hold the Power / Lock and Volume Down buttons at the same time and wait for the Apple logo to appear.

    For X / 8/8 Plus. quickly press and release the volume up button, then also to decrease the volume, then press and hold the side button until the “apple” appears.

    IOS version update

    If the camera malfunction occurs immediately after updating iOS or installing a new application, depending on the situation, there are options with restoring the system from a backup or installing a different firmware version. In the latter option, you can use FOTA (Firmware Over The Air). this is the official update of the phone system via the Internet: “Settings.” “General.” “Software update”, where you need to select your update. Or install the firmware via iTunes. In any case, you must first make a backup copy.

    All these procedures are quite complicated, and an application is becoming more and more popular, with the help of which you can organize both updating and fixing iOS errors in a few clicks, and with saving data and without creating copies.

    Camera switch

    The most primitive way to deal with an occasional glitch is to simply close the camera application and start it again. If there is no improvement, try testing the camera itself using any application that has access to it, such as FaceTime or Skype. Also, just in case, it makes sense to check the restrictions settings:

    READ  How to set a passcode on iPhone 7

    “Settings”. Screen Time. “Content and Privacy”. “Allowed Programs”. The camera switch must be on (green).

    A common case when the camera shows, but does not fire due to insufficient space for storing photos and videos. You just need to free up space by transferring media files to iCloud or to your computer. At the same time, it would be nice to get rid of other accumulated unnecessary applications, documents and files. The Tenorshare iCareFone app can be a huge help. For those who have not met this name, this file manager for iOS 12 (and earlier versions) not only transfers any content between the gadget and computer in Win and macOS, but also recovers data, and also solves many problems with iOS on iPhone / iPad / iPod.

    Well, finally, you can reset all iPhone settings to factory settings: “Settings”. “Basic”. “Reset”. Reset all settings. Remember that the data will be saved, but the settings will have to be restored again. When the simplest options have been exhausted, you should move on to more stringent.

    IPhone camera stopped working, fix problem via Tenorshare ReiBoot

    Two clicks to fix problems with the current version of iOS 12 and below. that’s why many users download this program in advance and store it on their computer in case of unforeseen troubles. In the main window there are only three buttons for starting different modes of operation, which are able to solve most of the problems that arise. In milder cases, it will be enough to “Enter recovery mode” and “Exit recovery mode”.

    To fix the iOS system, launch the application and connect the mobile device to the computer using a USB cable.

    Click “Fix Operating System” in order to optimize the performance of the system, then click “Fix Now”.

    When the process is complete, click on the start recovery button. It will take a few minutes for the iPhone to restart, do not remove the cable until the process is complete. Settings and data will be kept intact.

    Thus, Tenorshare ReiBoot is one of the best programs that helps iPhone / iPad / iPod touch owners to solve various problems related to device freezing (during startup, on the Apple logo, on a black screen, etc.) with the iOS system. (stuck in DFU mode, in recovery mode) and failures when syncing / updating / restoring the device without losing or corrupting data.

    Insufficient memory / low battery

    • camera does not work
    • black screen is lit in the “Camera” application
    • the message “The camera cannot be used” was displayed
    • insufficient space on iPhone or low battery

    Reasons: Not enough space on iPhone or low battery

    Fix: clearing iPhone memory / charging device

    Lovers of selfies and photographing everything around can be upset, because the memory on the iPhone, unfortunately, is not endless. So is the battery charge. If there is not enough memory on your iPhone, it’s time to get rid of something extra. If the problem is with charging, it’s time to recharge the device to continue using its camera.

    Crash in third party camera app

    • third party camera app
    • installed on iPhone
    • does not display picture
    • black screen is on when turned on
    • faulty application
    • the app does not have access to the camera
    • reboot third party camera / iPhone app
    • reinstalling a third-party camera application, opening access to the camera

    If it crashes in a third-party camera application that you installed on your iPhone, the first thing to check is if the camera works in the official Camera application. If everything is fine in it, then you should look in the settings to see if the application is allowed to access the camera or reinstall the application if it is faulty.

    Note: this method can also help if you do not have a camera / application icon on your desktop

    First way: How to check / open access to the camera on iPhone:

    • Go to Settings app
    • Then open the Screen Time tab
    • After that, you need to open the Content and Privacy panel and go to “Allowed Applications”
    • Check the list of available applications (the switch must be green).

    Method two: How to check / open camera access on iPhone:

    • Open the settings app
    • Go to the “Privacy” panel
    • Then go to the “Camera” tab. It will display all applications that have access to your iPhone’s camera.
    • Activate the switches in green in the applications that you select.

    If that doesn’t work, you can reinstall the third-party camera app by first uninstalling it.

    Remove the iPhone app from the home screen:

    • Tap and hold your finger on the application icon on the desktop
    • Click “Remove Application”.

    We remove the application through the settings:

    • Opening the settings
    • Go to the main settings tab
    • Opening the “iPhone Storage / iCloud” panel
    • Open the tab with the desired application and click delete.

    Voice-Over function is on

    • camera does not work
    • black screen is lit in the “Camera” application

    Reasons: Voice-Over function is enabled Correction: Voice-Over function is disabled

    Apple has developed a special Voice-Over feature for the iPhone to make it easier for blind or visually impaired people to use the iPhone. However, if this feature is enabled, you may experience a black screen when activating the camera on your iPhone. Therefore, the function can be disabled.

    • Open settings
    • Go to the Basic tab
    • Then open the accessibility menu
    • Disable Voice-Over function

    Hypothermia iPhone

    • iPhone camera displays black screen
    • iPhone is overcooled, iPhone won’t turn on after restarting (while you’re in the cold)

    Causes: temperature instability

    • go to a place with a stable room temperature
    • use protective iPhone case

    When trying to take a photo on an iPhone in winter, when the temperature outside is simply phenomenally low, users may encounter operating system problems. Don’t be surprised if your camera stuck in the cold or your iPhone stops working. This is Apple’s standard security system that disables your device when it is exposed to these conditions. Needed in order to avoid battery wear.

    As soon as you leave a place with a low temperature (20 ° C or lower), the iPhone warms up and you can turn it back on. Usually, after this “emergency shutdown” everything works as it should. If you want to avoid turning off in the cold, use a protective original Apple case made of leather or silicone, which is covered with microfiber inside.

    Crash in the Camera application

    • black screen
    • iPhone is frozen
    • the snapshot button in the app is not working
    • does not switch front / main camera mode on iPhone
    • bug of the “Camera” application
    • incorrectly installed iOS update
    • poor quality firmware
    • “Broken” version of iOS
    • unsuccessful jailbreak process
    • forced closing of the “Camera” application
    • emergency reboot / flashing iPhone via DFU mode
    • iOS restore from backup

    It is not uncommon for Camera to crash on iPhone. A similar nuisance can happen if you run too many applications in the background or incorrectly installed an operating system update.

    Usually, a simple forced closing of the application helps to avoid the problem, and a simple restart often saves. Nevertheless, if this did not help you and the Camera application on the iPhone still displays a black screen, you need to resort to restoring an iOS backup or repairing the device at an Apple service center.

    Overlapping / contamination of the chamber

    • iPhone camera is working, but black screen is visible
    • spots visible in the camera app
    • iPhone won’t focus on photo / takes blurry shots

    Reasons: a case or any other object of dirt is blocking the camera lens

    • removing iPhone from case
    • getting rid of the object that is blocking the lens

    It’s funny, but there are times when we simply forget that something may be blocking the iPhone’s camera. Also, the camera lens is prone to dirt. To avoid panic, first wipe the lens and check to see if anything is blocking the camera. It is trite, but sometimes the reason for the “malfunction” is simply an incorrectly selected case, careless handling of the iPhone or an incorrectly installed protective glass.

    Note: if your camera does not focus, the reason may lie in disabling autofocus. The AE / AF Lock indicator will light up on the screen in the Camera application. To disable it and fix the problem. just click on the focus icon and enable autofocus.

    What to do if the camera is not working on iPhone

    The iPhone camera is almost the most important and beloved part of an apple smartphone. High-quality hardware, a first-class operating system. literally everything makes the iPhone the leader among smartphones in photography. Despite the fact that the iPhone camera is physically damaged quite rarely (in comparison with other smartphones), it can still sometimes glitch and malfunction. We will tell you why this happens and whether you can fix this problem yourself.

    Camera and flash don’t work

    • the camera does not work, the black screen is on in the “Camera” application
    • camera flash does not work
    • iPhone flashlight does not work
    • damage to internal components of the iPhone camera
    • hitting iPhone in water
    • iPhone drop

    Fix: diagnose and repair the iPhone camera at a specialized service center

    The saddest breakdown is the breakdown of the camera module on the iPhone. You can calculate this breakdown yourself if you try to activate the flash / torch. It does not work. there is a problem with the entire camera module and, unfortunately, it is impossible to fix it yourself.

    However, you can contact the iLab service center or call our technician to your home so that he can quickly fix your iPhone camera.

    In this article, we have covered only the most common reasons why your iPhone’s camera may not work. In fact, there are much more of them, believe me. This is because iPhone and iOS are one-piece systems, in which the failure of one of the parts / components of the code can lead to the termination of the device.

    We are very glad if our advice was useful to you and we will be grateful for your feedback. Nevertheless, we strongly ask you not to ignore the breakdown of your iPhone and contact the service center in time, if you have such an opportunity.

    Remember: if you follow the iPhone well, it can serve you for a very long time and regularly.

    BYRGPUB.COM 2021