My iPhone XS or XS Max Won’t Turn On! Here’s The Real Fix.

If you have an iPad equipped with a Face ID scanner (without the Home button)

This method is completely identical with the latest iPhone models: you need to press and quickly release the volume up button. Then press and quickly release the volume down button. Then press and hold the power button until the device restarts (the Apple logo appears).

iphone, turn

If you have an iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone SE (2020), iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone 12, iPhone 12 mini, iPhone 12 Pro or iPhone 12 Pro Max

Press and quickly release the volume up button. Press and quickly release the volume down button. Then press and hold the side button until the Apple logo appears.

Your iPhone or iPad battery is completely discharged?

If your iPhone or iPad is discharged, connect it to the power adapter and charge it for 15 minutes, then try to turn it on without disconnecting from the charger.

If the battery is completely discharged, then sometimes after 5-15 minutes of charging, by pressing the power button, you can see an image with a lightning and an outlet on the screen of a smartphone or tablet. This means that not enough time has passed since charging started. Wait a little more.

On the left is a screenshot of an iOS device that is not connected to the charger, on the right. it is charging:

iPhone or iPad is frozen, does not turn on, or does not respond to buttons. What to do?

Don’t panic if your iPhone or iPad won’t turn on or respond to buttons when you try to turn it on. There are two ways to quickly bring it into working order, which we will tell you about.

The first two reasons iPhone won’t turn on are not related to hardware or software glitches. Most likely, the smartphone is simply discharged and needs to be recharged, or it freezes, in which case a forced reboot will help.

If you have an iPhone 7 or iPhone 7 Plus

Press and hold both the Power button and the volume down button on the left for 15-20 seconds, after which the Apple logo will appear on the screen.

If you have an iPhone 2G, iPhone 3G, iPhone 3Gs, iPhone 4, iPhone 4s, iPhone 5, iPhone 5c, iPhone 5s, iPhone 6/6 Plus, iPhone 6s / 6s Plus, iPhone SE (2016), or iPad with a Home button

To revive the above iPhone and iPad models, just press and hold the Power button and the Home button at the same time for 15-20 seconds, after which the Apple logo will appear on the screen.

iPhone or iPad is frozen, won’t turn on or respond to buttons (may be black screen)

A common problem. A fully charged iPhone (iPad) is frozen (the program is frozen) or has completely turned off. Pressing the screen or the side button, unfortunately, does not lead to anything and does not start the device.

Do not worry! In 99%, nothing terrible happened, the smartphone automatically went into the so-called “save mode”, this happens if you very rarely restart the device.

It should be noted that resuscitation methods may differ depending on the device model. so.

Nothing helped?

The above situations are standard and, as a rule, are resolved in an elementary way. However, if the solutions provided did not help, you are most likely experiencing one of the following problems:

  • The battery or power controller is out of order.
  • Defective adapter or USB cable. Replace the defective charger;
  • Dirty cable connector. Clean the cable connector;
  • Using a non-original charging cable. Replace the used cable with the original one or its MFI analog;
  • Mechanical damage to the charging connector or other mechanical damage to the device. Contact the service center;
  • Defective device. Contact your place of purchase for a warranty replacement.

If when you turn on the iPhone or iPad shows the apple logo on the screen without booting the system, try to force restart the device (described above), and if using it does not bring any result, restore the device using this instruction.

How can you fix an iPhone problem without leaving your home

First, make sure the battery is charged and not the cause. Connect iPhone to original charger and press “Power”. The device turns on quickly under normal conditions, but if the iPhone has not worked for a long time, then, most likely, the battery went into deep discharge mode and you need to wait about half an hour. Check if the charger is heating up, if there is any dirt in the connector. The iPhone may not start because there is not enough current (this happens when using cheap chargers and connecting the battery to the USB port of the computer).

If you see a black screen and the phone buzzes and beeps intermittently but won’t turn on, try restarting it. Algorithm:

  • press the “Sleep / Wake” and “Home” buttons at the same time (if you have an iPhone 7 or 7S, use a combination of “Power” and “Volume”)
  • hold (about 10-15 seconds) until the Apple logo loads

A hard reset will not erase iPhone data (contacts, pictures, videos, etc.). If the smartphone still does not turn on, you will have to act more radically:

  • connect the original USB cable to the computer and open iTunes
  • press the “Power” and “Volume” buttons (for 7th generation models) or “Power” and “Home” (for iPads, iPods, iPhones 6 and earlier models); release them only when the screen goes blank
  • press Home and, connecting the USB cable to the smartphone, hold the button until the iTunes logo turns on and the plug icon appears
  • confirm the procedure for updating iOS (if you want to keep the data) or restoring iPhone (if the information has already been saved on another medium)

The new software installation process takes about forty minutes. At this time, it will seem that the iPhone has turned off. the screen will turn off, the phone will not vibrate, buzz and get very hot. During the procedure, the Internet connection should work well, otherwise the software will not load.

What can cause the problem with iPhone

The reasons for iPhone breakdown can be software and hardware. In cases where the phone freezes or turns off, because incorrectly configured and buggy, most likely you can fix it on your own. At home, you can also disconnect and reconnect the battery if you are experienced in iPhone disassembly and have tools: spudger, suction cup, tweezers.

If iPhone won’t turn on due to complex hardware problems, it’s best to contact a qualified technician right away. Visit an Apple Service Center if you suspect a manufacturing defect. And urgently seek help from the workshop if you spill liquid on your iPhone: tea, coffee, juice or other drink. You cannot dry the display with a hairdryer, you need to immediately carry the gadget to the master. It is important to clean the contact pads and boards in time to prevent corrosion inside the iPhone.

Basically, problems with the iPhone (difficulty turning on) arise for the following reasons:

  • The battery is completely discharged or was in the cold (in this case, you need to wait. the phone does not turn on only temporarily)
  • the smartphone has been dropped, improperly repaired or flooded
  • a factory defect of parts is allowed (for example, a power controller, a U2 microcircuit or a battery. the phone will not turn on without them)
  • software malfunction (iOS itself or other software)
  • a charger is used that is broken (that is, the iPhone does not turn on, although it hangs on the charge, since it simply does not charge)

Find the cause of the breakdown, act consistently and you may not have to spend money on repairs.

IPhone Symptoms

IPhone problems can manifest themselves in different ways, depending on the nature of the problem. Possible situations:

  • the screen is black or has gone out, the phone does not respond to button presses and touching the sensor
  • The iPhone turns on, but it gets very hot (you can feel the display or adapter hot) and quickly discharges (the battery lasts for several hours, even if the indicator is on and the gadget hangs on charge all night)
  • the smartphone is charged, but you cannot turn it on. the logo flashes for a long time, iOS does not start
  • iPhone keeps turning off spontaneously
  • iPhone won’t turn on, although it beeps and vibrates

If you have been using your iPhone in the cold for a long time and cannot turn it on, the situation is normal, since the battery is designed only for a certain temperature. Wait until the battery warms up to room temperature, and only then start diagnostics.

iPhone won’t turn on

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

What to do when your Apple iPhone X won’t turn on

If the iPhone is disconnected, does not charge or turn on (for example, vibrates, shows the logo and turns off immediately), do not rush to go to the service and call the wizard. In some cases, problems with Apple technology can be solved without qualified intervention. Perform diagnostics at home, try to understand why the smartphone turns off. Try to find the exact cause of the iPhone breakdown and fix it on your own.

Software settings ok: what to do

If everything is in order with iOS, firmware and applications on iPhone, contact the specialists.

Of course, if you have the tools you need, you can disassemble the iPhone yourself and, for example, turn off and reconnect the battery. But without experience and qualifications, you can accidentally damage other parts and, of course, violate the warranty conditions.

Owners of iPhones with a valid warranty can contact the employees of an authorized service center to make repairs free of charge. If the warranty is violated (for example, iPhone has survived drops in water or shocks requiring replacement of the case), the best way to solve the problem is to call an experienced technician at home.

YouDo is a great alternative to free classified ads. Benefits of the service for iPhone owners:

  • performers provide only reliable data, undergo a special check (verification)
  • technicians quickly and accurately find the cause of the breakdown if the iPhone constantly turns off, does not respond to buttons or does not work at all
  • professionals provide on-site iPhone repair services, set reasonable and provide guarantees for up to 1 year
  • private traders and firms use only original Apple spare parts (batteries, power controllers, etc.) and professional tools (allowing you to carefully disassemble the iPhone case, disconnect the battery, repair the motherboard)

Apply for in a couple of clicks, select an artist and call him at any convenient time. Tell the phone technician all the details: why the iPhone turned off, how long does the phone blink or vibrate, have you tried to disconnect the battery and restart the device, how much the charger heats up.

If the iPhone does not turn on due to faulty hardware, performer Yudu will fix the breakage within 1 hour.

IPhone X won’t turn on. what to do?

If your iPhone stops turning on, you don’t need to panic right away. A black screen can mean that the smartphone is frozen, in which case a reboot helps. But there are other reasons due to which the iPhone X does not turn on, then it is necessary to restore the device at a service center. If you need the help of specialists who thoroughly know the device of gadgets and are able to quickly fix any breakdowns, contact the Apple SC

Reasons iPhone 10 won’t turn on

Often, the device does not boot due to screen malfunctions. In this case, the owner of the smartphone may face the following problems:

  • Display stays black after charging, although iPhone 10 can produce sound and vibration.
  • the screen works and displays a picture, but does not respond to touch;
  • the apple logo appears on the display and iTunes does not recognize the device;
  • after talking, the iPhone screen does not turn on.

The most common reasons why iPhone X won’t boot are:

  • the battery does not charge, although the cable is connected and the charging indicator is displayed;
  • the operating system of the smartphone is damaged;
  • there were problems in the operation of components.

What to do if iPhone won’t boot / work

Often the problem can be solved with a forced reboot of the device. To do this, you must first click on the top of the button that controls the sound. Then you need to click on the bottom of this button. After that, press and hold the side button of the smartphone, and release it when the logo appears on the display. After reboot, the device will work properly.

Low battery power may be the reason iPhone won’t boot or work. In the new device, the battery charge is enough for several hours of use and for setting up iOS. When recharging again, you need to make sure that the cable is securely connected to the smartphone and to the power adapter. When the phone is charging, there should be an image of the battery on the screen. When charging for the first time, you must leave the smartphone connected to the mains until the battery is fully charged.

If iPhone 10 won’t turn on and freezes on startup, it will need an iTunes update. Before performing recovery operations, you must back up the data contained in your phone. A copy can be saved on a computer or virtual cloud. In update mode, iTunes reinstalls the operating system and applications, but does not delete files from the iPhone. When you enable recovery mode, it is reset to factory settings.

When the smartphone does not work due to software problems, it is a warranty case. They will be able to help at an Apple Authorized Service Center. Contact us for free iPhone 10 warranty repairs.

Physical damage and water ingress into the phone require non-warranty repair. If your iPhone X does not turn on or freezes, seek help from the Apple service center Our experienced technicians will diagnose and quickly revive your smartphone for free.

Check the battery

How to turn on the phone if it does not turn on and does not charge with any charger? In this case, it is worth checking if the battery is connected correctly. Remember. have you dropped your device lately? If dropped, the cover could be damaged, which presses the battery to the contacts. This is especially true for older models with removable batteries, which are not very securely fixed in the case.

If the phone has not been dropped and the battery shows no signs of damage, try restarting or resetting the gadget to factory settings.

Reboot your smartphone

What to do if your Android phone or iPhone won’t turn on? If you have tried all the methods, you can turn to another one. forced reboot. Perhaps the gadget has turned off and does not want to work due to the last installed application or a firmware update that caused the system to crash. The smartphone could simply freeze and stop responding to button presses. making it seem to the user that it will not turn on.

To restart an old iPhone (up to the sixth line), you must simultaneously press and hold the Sleep / Wake and Home keys until the Apple logo appears on the display. On iPhones of the seventh series, it is worth using a different combination: the side power and volume down buttons. IPhone 8, iPhone 8 Plus, iPhone SE, and all new devices without a Home button are rebooted using the following combination:

  • press the volume down and then volume up one by one;
  • press and hold the side button.

Android devices usually do not require such tambourine dances. they can be rebooted with a long press of the power button. However, some models use a key combination to force a restart: “Volume up” “Power on” or “Down” “Power on”. Try different options if necessary.

Why the phone won’t turn on and what to do about it: 6 tips

We figure out what to do if the phone does not turn on, and find out the most common causes of the problem.

Sometimes smartphones get into trouble. For example, if the phone falls down and does not turn on. what to do in this case? It is even worse if the gadget did not fall and generally worked fine, and now it charges, but does not turn on. Fortunately, you can fix many issues yourself by resetting your smartphone to factory settings or by updating your charger. We will tell you more about what actions you need to take if the device does not respond to pressing the power button.

Warm up or cool down the smartphone

Sometimes your phone won’t turn on or charge due to unfavorable temperatures, for example, if you’ve been out in the cold for a long time or left your device in the sun on a hot day. In the first case, he could pass out due to the cold. some phones still do not tolerate low temperatures, especially iPhones. In the second scenario, the battery will not charge until it cools down. this is necessary to protect the device from overheating.

Try to warm up or, conversely, cool the phone to room temperature. To do this, you do not need to use a refrigerator or put it on a battery. just leave the gadget in a room with a constant climate and wait a little. If the failure was related to the temperature regime, then the smartphone should quickly recover and start charging. This usually takes no more than half an hour. If it still does not turn on, try other methods from our material.

Recharge your smartphone

The most common reason why the phone turned off and won’t turn on is a banal battery drain. If the smartphone has not been dropped into water or exposed to extremely low or high temperatures, it can be immediately connected to the charger. Just in case, check different sockets and chargers. perhaps the adapter or cable that you use with your smartphone is out of order.

Dry the device

If your smartphone stops working after you drop it into water or get caught in the rain, most likely it’s all about moisture that has got inside the case. over, if the gadget does not have water resistance, which would help it survive swimming.

In this case, you need to open the cover of the device, remove the SIM card and memory card, wipe all parts with a dry cloth and leave to dry disassembled. We do not recommend drying the apparatus with a hairdryer or hiding in rice.

For more information on what to do if you dropped your smartphone into the water, we talked about it in a separate article. It also happens that even IP68 certified devices “sink”. We figured out if they can be repaired under warranty:

Reset smartphone to factory settings

Any malfunction can be rectified by restoring the factory settings. However, this option should be used only as a last resort, since when you reset the device to factory, you will lose all the data that was stored on it. If the information could not be saved somewhere else, it is better to turn to less stringent methods.

Nevertheless, even a person far from technology can reset a smartphone to factory settings. We have made detailed instructions to help you restore the parameters of devices on Android and iOS.

If, after all the manipulations, the smartphone still does not turn on, contact the manufacturer’s service center. perhaps they will repair it under warranty.

Disconnecting iPhone during a call: finding and fixing the cause

IPhone problem: shut down and won’t turn on

The iPhone has turned off and does not turn on, what to do. this question is asked by many owners of Apple smartphones when faced with an unpleasant situation. A device’s reluctance to turn on is not necessarily an indication of a serious hardware failure that will require costly repairs to fix. In some cases, the problem is caused by a software glitch that you can fix yourself.

Inclusion methods

Before attempting the troubleshooting steps listed below, check for two factors that are not in any way related to failure, software or hardware. The first factor is the charge level of the device. If the battery is discharged, then the phone could well turn off on its own and not turn on again. Connect iPhone to charger and wait 15 minutes, then try turning on your smartphone again.

If a fully charged iPhone turns off, check the second factor. switching to save mode. It can happen if you rarely restart your phone. To bring the smartphone out of this state, perform a hard reboot.

  • Press and hold the Power and Home buttons for 15-20 seconds (relevant for all models released before the iPhone 7).
  • Hold down the Power button and the Volume Down key for 15-20 seconds (for iPhone 7 and 7 Plus).

After the logo appears, the phone will turn on and start working without errors. If there is no positive result, proceed to diagnose the device.

iPhone turns on and off immediately: how to restore a smartphone

Hardware faults

The most unpleasant thing that can happen to an iPhone is hardware problems. They can arise as a result of mechanical impact (shock, fall), ingress of moisture, improper operation, factory defect. What malfunctions the user may encounter:

  • Failure of device components.
  • Liquid penetration into the device case, corrosion.
  • Failure of the battery or power controller.
  • Defective charger, using a non-original cable.
  • Damaged or dirty charging connector.

Mechanical damage can lead to the fact that individual components stop working even if there are no external signs of failure. High-tech devices are quite fragile, so be sure to use protective accessories: case, bumper, film, etc.

Another important aspect is charging through the original device. Mismatching characteristics can render the power controller unusable, causing the phone to stop charging and turn on.

The iPhone turned off on its own and does not turn on, what to do. if the answer to this question remains unknown, it is recommended to contact a service center.

Do not try to open the device yourself, replace damaged components if there is no such experience.

Improper repairs can lead to serious problems, the elimination of which will take more time and money.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

Software problems

Apple devices are as prone to system glitches as other phones. The reasons may be different:

  • Too high load on RAM due to a large number of programs running in the background.
  • Incorrectly conducted jailbreak.
  • Incorrect device firmware, etc.

If a hard restart does not solve the problem, then it makes sense to restore your iPhone after backing up your data. To solve the problem, you need a computer with iTunes.

Important: during the recovery, all information will be deleted from the phone, so before performing the firmware, make sure that you have backed up your data.

  • Connect iPhone to Computer with iTunes Open.
  • Put the device in DFU mode. Hold Power and Home for 10 seconds, then release the Power button and hold Home for another 10 seconds until iTunes displays a message that the smartphone has been detected in recovery mode.

If DFU recovery does not resolve the problem, then there is a good chance that the problem is caused by a hardware problem.

Комментарии и мнения владельцев: 6

Thanks to all, this is my old computer tomorrow I will go for a new one, therefore, it does not download version 12.6

Guys, my aiped turned off by itself. I watched a movie on YouTube, then he told me that wifa, not then he threw me out of YouTube and turned off

I changed the module on an iPhone 4 with a non-working power button. To check the module, I switched it on through charging. Accordingly, he turned off by removing the battery to a hot one (i.e. on the turned on device). It no longer shows signs of life, the charging current takes, the short circuit board does not ring (at the terminals) What’s the matter, tell me.

Thank you very much for your advice, it helped a lot. The first time the phone turned off like that, I didn’t know what to do.

Breakage of the power button

If the phone won’t turn on or respond to the power button, there is a chance that the latter is out of order.

This could have happened as a result of a fall of the device or simply due to wear of contacts on old devices. In this case, you cannot do without specialists.

Broken battery

If the problem is not with the adapter or cable, then the problem is likely with the battery. Owners of modern devices with a monolithic case will not be able to replace the battery on their own, here you need to contact the specialists.

Why the phone won’t turn on: 10 reasons

Charger or cable out of order

If charging did not help and the mobile phone still does not respond to the power button, you need to dig deeper. Check the functionality of the charger and cable used. It is likely that one of these items is defective.

To check the cord, connect the device to the computer through it. If the gadget is charging, then the cable has nothing to do with it, and most likely it’s the adapter. Try to connect another smartphone (friend or neighbor) to this power supply. If it won’t charge, congratulations, you’ve identified the source of the problem.

USB flash drive problem

Sometimes an Android phone may not turn on due to a faulty memory card, or viruses that have stuck on the flash drive. Try to remove the MicroSD and turn on the smartphone without it.

Screen breakage

It may be that the phone is actually turned on, you just do not see the picture due to a broken display. Usually, the matrix does not die immediately, the breakdown can be determined by indirect signs. Therefore, remember. have your smartphone recently had any problems with the screen: burned-out pixels, incomprehensible stripes, yellow or purple spots, problems with the sensor, etc.

Battery discharge

Yes, trite, but it is likely that Smart is simply discharged. The problem of deep discharge is overlooked by many, so before doing anything further, just plug the device into an outlet.

In this case, you should not try to turn on the device right away. let it calmly charge for at least an hour.

How to erase iPhone if the screen doesn’t work?

Erasing Data from an iPhone, iPad, or iPod touch

  • Go to the menu “Settings” “General” “Reset” Then click “Erase content and settings”.
  • Enter your device password or Apple ID password when prompted. Then confirm that you want to erase the data from the device.
  • Wait for the data to be erased

How to turn on iPhone 10 if it won’t turn on?

Press and quickly release the volume down button. Press and hold the top button until the device starts to reboot. Continue holding the top button until the device enters recovery mode.

How to restart iPhone if black screen?

  • Hold down the Home button (the largest button on the phone, bottom middle) and the Sleep button (the one on top that can unlock the smartphone).
  • Hold down the buttons for 10 seconds.
  • Your iPhone should restart. The screen will light up, an apple will appear.

What to do if iPhone has a black screen but it works?

You can restore a black screen on a working iPhone by rebooting. When the device freezes, restart usually helps. Press the power button and the Home button at the same time and hold for 20 seconds until the corporate logo appears. If the dark screen does not disappear after that, then the problem should be looked for in another.

How to unlock iPhone if the screen is broken?

Step by Step to Unlock Broken Screen iPhone

  • Start Unlocking iPhone on Computer
  • Connect iPhone to Computer
  • Put iPhone into recovery mode
  • Download firmware package
  • Start Unlocking iPhone with Broken Screen
  • Step 6.

Force iOS update

The firmware update usually takes about 40 minutes. After the performed procedure, your iPhone and display should take some time to work. It usually takes up to 40 minutes for iOS to download from Apple servers. Usually, an emergency reboot of the device helps to cope with any failure during the firmware update, but if this does not happen, try entering DFU Mode and resetting the settings to factory settings.

Mechanical damage is a reason to contact the service

As we said, there are probably two main reasons why your screen went dark. The first is if the cable that connects the LCD display to the logic board disconnected (came off) when dropped, the second. the display itself is broken. Only experienced service technicians can determine the exact cause. The service center “iMobi” will conduct a free diagnosis of your device and tell you exactly what kind of repair you need.

If the problem is with the cable, then this fix is ​​relatively simple: the wizard will open your iPhone and reconnect the digitizer cable to the logic board.

If the LCD is broken, that’s another story, but doable. Replacement of the screen (display) iPhone (Kiev) in the Apple service center “iMobi” will be done quickly and inexpensively using original spare parts.

What to do when your iPhone is on but the screen is black.

Even the highest quality smartphones periodically fail. any user can suddenly face such a problem as a black screen on the iPhone. You have rebooted your iPhone, connected it to the charger, and your iPhone screen is still black, take your time to get upset. Perhaps, restoring the device is not as difficult as it seems at first glance. Various breakdowns can lead to the appearance of a black screen, which in some cases can be eliminated by yourself.

In this article, we’ll explain why your iPhone screen won’t turn on and what you can do to fix it.

When iPhone won’t turn on due to full battery drain

Battery is completely drained. Another reason iPhone has a dark screen is when the battery is completely drained. If you used the gadget in the cold, and after that found that it went out and does not respond to attempts to turn it on, follow the following algorithm:

  • warm the device in your hands
  • connect the device to the charger
  • wait 15 minutes

After that, the download should start automatically. If this does not happen, check if the charging is working properly. It might be worth replacing it.

Why does iPhone have a black screen

Black screens on iPhones can be for a variety of reasons, from hardware glitches to firmware issues.

Typical reasons why the iPhone screen won’t turn on:

  • If the phone is dropped on a hard surface or other mechanical damage that can damage the display, the flex cable may come off.
  • Full discharge of the smartphone, which can lead to the fact that the “apple” device stops functioning. vibrate, transmit signals, show an image of an apple, etc.
  • There is a bug in a specific application. In this case, the display darkens when you enter this application.
  • A failure occurred during the download phase of updates. At the same time, the apple icon is constantly on the screen and nothing else happens.

What to do if iPhone is frozen

Freezing is a problem that any computer technician faces. At some point, one of the programs begins to behave incorrectly or conflicts with another program, and as a result, the entire device is inoperative. This situation is called freezing.

iPhone is also prone to this issue and may freeze from time to time. Usually, when the iPhone freezes, it refuses to turn off or restart, which confuses the user. Most often old models freeze, such as iPhone 4, 4s, 5, 5s and 6. But sometimes even iPhone 6s and 7 users face freezes.

If you find yourself in such a situation, then this material should help you, here you will learn what to do if your iPhone is frozen.

iPhone frozen and won’t turn off or restart

Usually, if the iPhone freezes, users try to turn it off or restart using the standard procedure, namely by long pressing the Power / Lock button. Unfortunately, in most cases, when the iPhone freezes, this shutdown method does not work. iPhone keeps running and running frozen applications no matter how long the user presses the power button.

iPhone X wont turn on. fix

But, the iPhone has an alternative shutdown method that bypasses the iOS operating system. Due to this, this shutdown method works even on tightly frozen devices. The method consists in simultaneously pressing the Home button and the Power / Lock button.

The Home and Power buttons must be pressed simultaneously and held until the frozen iPhone turns off. After turning off, you need to wait a few seconds and make a short single press on the power button. After that, the iPhone will turn on and start working normally.

It should be noted that the key combination “Home Power” is also responsible for taking a screenshot. But, to get a screenshot on these keys, you need to press literally for 1 second, if you hold the keys longer, then the anti-freeze protection will work and the iPhone will reboot.

If you have an iPhone X or newer, then you need to use the new reboot method.

iPhone freezes when turned on

Pressing the Power On Home buttons at the same time allows you to turn the device off and on in any situation. However, this procedure does not guarantee that the iPhone will not freeze again during the startup process.

If your iPhone freezes before the device is fully loaded, then you can use the recovery mode called “Recovery Mode”. With it, you can restore your iPhone to its original state and bring it back to life. But, it should be borne in mind that this procedure is equivalent to a factory reset and leads to the deletion of all user data.

In order to enter Recovery Mode on iPhone and perform recovery, you need to do the following:

  • Turn off your iPhone and wait a couple of minutes for all programs to finish their work. If the iPhone does not turn off in the standard way, then you can resort to the combination “Turn on Home” described above.
  • Then you need to press the “Home” button and without releasing it, connect the iPhone to the computer via the Lightning cable.
  • Once connected, keep holding the Home button until the iTunes logo and cable image appears on the iPhone.
  • Now you need to release the Home button and start iTunes on your computer.
  • In the iTunes program, you need to go to the iPhone settings and click on the “Restore iPhone” button.

Thus, you can solve the problem with the iPhone freezing during startup, but, as already mentioned, for this you will need to donate all user files. You can read more about Recovery Mode in our article on resetting iPad to factory settings.

Also on Apple devices there is a so-called DFU mode or Device Firmware Update. If recovery mode does not help, then you can try to enter iPhone into DFU mode and try recovery again.

Curve firmware or Jailbreak installed

iPhone may freeze in “brick” state showing “apple” or constantly reboot due to unsuccessful firmware or installed Jailbreak. You can try to reflash the device by uploading a new version of iOS firmware to “tuna” (iTunes). Files are downloaded, here are all links to archives from the official Apple website or from the IPSW service for hacked gadgets. The whole procedure is described in detail here.

After flashing, do not forget to restore the backup saved on your computer.

What to do if iPhone won’t turn on and doesn’t respond to anything

Sometimes gadgets fail at the most inopportune moment, forcing us to explore the Internet in search of answers. The iPhone is no exception. Today we will figure out what to do if the iPhone does not turn on, does not charge and does not respond to pressing.

We follow our instructions, built on the principle from a simple solution to a complex one. The manual is universal and suitable for all models: 4, 4s, 5, 5c, 5s, 6, 6 Plus, 6s, 6s Plus, SE, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11. 11 Pro, 11 Pro Max.

  • The charge level disappears before our eyes, 10 minutes was 90%, it was 20%,
  • The apple logo is on, it suddenly goes out, and then it does not load,
  • Display blinks cyclically,
  • Sometimes after a successful turn on, iOS shamelessly lags, glitches, slows down, lives its own life, and then hangs tightly,
  • Knocked out after talking or uninstalling an app.
  • To start
  • Connect to charger
  • Do a hard reboot
  • After frost or extreme heat
  • Main reasons
  • Lightning connector is broken or clogged
  • The battery died
  • The power button is broken
  • Burnt out charge controller
  • Faulty motherboard
  • Falling or drowning
  • Curve firmware or Jailbreak installed
  • Malfunction in the screen or video adapter
  • Question answer
  • Conclusion
  • Video

Malfunction in the screen or video adapter

It rarely happens that the display remains black, but periodically blinks in different colors or “streaks”. This problem indicates a breakdown of the Martica or the video adapter. This happens after hard landings on concrete or other rough surface.

Main reasons

If your case did not fall under the above scenarios, you may have to replace entire modules. Tens of thousands of components make up an iPhone, here are the main parts of the device that can cause problems.

To start

Remember! Li-ion batteries have a lifespan of about 3-4 years, or 300-400 charge-discharge cycles.

If the smartphone lasts longer than this time, it’s definitely time to go to the workshop.!

Do a hard reboot

You can try to “wake up” the device yourself: restart the device without disconnecting it from the charger. To do this, press the “Power” and “Home” buttons at the same time (or the volume down key for models from the 7th generation), hold for 10-20 seconds. To force restart the iPhone X, press the volume key up, then down and hold down the power button until the apple sign appears. For detailed instructions for each model, see here.

The battery died

This is the most common reason iPhone won’t turn on, other than charging problems. A sign of battery failure can be a sudden shutdown at a 10-30% charge remaining, a regular shutdown at a cold temperature (below 1 degree). A failed battery can be replaced: the cost of work together with a spare part will be about 2.000. 7.000 rubles. in the official service and at half the price of unofficial.

If the phone starts to revive after a long period of non-use, for example, it has been left in a drawer on the desktop for a long vacation, the battery may be deeply discharged (“sleeping battery”). In this case, the destruction of chemical bonds inside the battery occurs, and as a result, the voltage decreases to 1-2 volts. The power controller on the motherboard detects a critically low battery level and blocks the battery charging. Voltage blocking, protects the Li-ion battery from swelling, and prevents damage to the electronic filling of the iPhone.

Any complete discharge is a risk of loss of performance, you should not bring the phone’s energy to zero. Experts advise keeping the charge in the 80 to 20% range.

You can try to push the battery, but for this you have to remove the battery by disassembling the case. After removal, connect the cell to a universal charger, commonly called a “frog”. Thanks to the direct power supply circuit, there is a chance that the battery will come to life.

But this is a temporary solution, continue to monitor the device: the battery may be discharged too quickly and then you cannot do without a replacement in the service.

After frost or extreme heat

If you keep the iPhone in the sun for a long time, the battery will overheat more than 45 degrees, and will require cooling before starting work: a thermometer icon will appear and the inscription “temperature is high, cool the device”. Until the temperature drops, the functions of the device will be unavailable.

Cold below 3.5 degrees, also “turns off” the smartphone: after hypothermia, the device must be kept warm. Sometimes the cell phone immediately turns off by itself in the cold, this is a sign of a battery that has become unusable: there is a risk that it will have to be replaced.