Device firmware

If the iPad has turned off and does not respond to touch after jailbreak, update, installation of a previous version of iOS, or an apple hangs on the screen, then you need to restore the device. But before proceeding with this procedure, make sure that a backup copy of the data is stored on your computer or in iCloud: when flashing, all information from the iPad will be deleted.

First try to restore iPad Air or Mini in Recovery Mode:

  • Connect iPad to computer, launch iTunes.
  • Click “Restore iPad”.
  • Wait for iTunes to download and install the latest iOS.

If the tablet does not respond to actions and still turns off and does not turn on, then you need to do a recovery in DFU mode. To put the tablet in DFU mode, connect it to a computer with iTunes open, and then hold down the Power and Home keys for 10 seconds. After 10 seconds, release the Power button, but hold Home until this message appears:

Recovery is performed according to the algorithm described above. You can also download the firmware yourself and select it by clicking “Restore” while holding down the Shift key.

ipad, turn, update

Disconnecting iPhone during a call: finding and fixing the cause

Hard reboot

If your iPad Mini or Air isn’t shutting down due to a dead battery, try reanimating it with a quick restart. This method works for most users, so be sure to use it.

Press and hold two buttons. Home and Power. On iPad Mini, Air, 2, and 3, these buttons are in the same place. Hold the keys until you see an apple on the screen. If the tablet does not respond to a hard reboot (the apple is off), then proceed to the next troubleshooting method. device firmware.

iPhone turns on and off immediately: how to restore a smartphone

iPad won’t turn on: diagnostics and troubleshooting

If the iPad won’t turn on, the problem could be due to both software glitches and hardware malfunctions. With the first, the user can cope independently, but in case of breakdown of individual components of the tablet, it is recommended to immediately contact the service center.

Contacting the service center

If the firmware did not help return the iPad Air or Mini to a working state, it still turns off and does not respond to touch, then take the tablet to a service center. Why is it not recommended to do it yourself? Troubles such as moisture, damage to components, breakage of the power button, etc. require qualified repair. It is almost impossible to make it at home.

Do not forget to read the Комментарии и мнения владельцев, there is also a lot of useful information. If there is no answer to your question, and there is an answer to later Комментарии и мнения владельцев, then the answer to your question is contained in the article, respect someone else’s time.

Hard reset iPad

Let’s start with the simplest way to bring the iPad back to life, which is often a lifesaver. It’s not uncommon for iPad to not turn on due to a software error that needs to be reset. This is very easy to do. you need to perform a so-called “hard” reboot.

To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).

If the Apple logo appears, the iPad is saved! The tablet will turn on and work as before. If the “hard” reboot did not lead to anything, then you should proceed to the following methods.

Enter iPad into Recovery Mode

The next effective way to solve the problem is to activate Recovery Mode on iPad. Successfully Putting iPad Into Recovery Mode To Bring It Back To Life With iTunes.

In order to enter iPad into recovery mode, follow these steps:

Press and hold the Home button on iPad and connect the tablet to the computer using a USB cable.

Continue holding the Home button until the iTunes logo appears on the iPad.

If the iPad reacted and entered recovery mode, you will have the opportunity to restore the tablet to work.

After entering iPad into recovery mode, you need to launch iTunes. As soon as the program starts, it signals that the iPad is found and suggests updating or restoring the device.

First of all, you need to try to update the iPad, as in this case it will be possible to get rid of the problem without losing data. However, if your iPad has previously been updated to the latest iOS version, then, of course, it will not be possible to update it.

In this case, all that remains is to select the “Restore” item. After restoring, iPad will start to turn on, but all data on it will be deleted. This method is only recommended if you’ve recently backed up your iPad data.

Check the cable and charging adapter

First of all, you need to make sure that the iPad has stopped turning on, not due to a low battery. Many will be surprised, but often the problem is really that the iPad is completely discharged, but does not charge due to a broken cable or charger.

Making sure the problem isn’t with the accessories is pretty easy. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the following methods.

iPad won’t turn on. what to do? 5 ways to solve the problem

iPad is recognized as the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, for example, the tablet may stop turning on. What to do if iPad won’t turn on? In this manual, we talked about the most effective and efficient ways to solve the problem.

iPad won’t turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last. at one of the stages, your iPad will work again!

Make sure the iPad connector isn’t clogged

It is also not uncommon for the iPad to not charge, and at the same time does not turn on, due to the fact that the charging port of the tablet is clogged. This happens most often on old tablets that have been in active use for several years.

Clean the charging port, for example with a toothpick. It is important to proceed with care and use gentle strokes to remove accumulated debris from the connector. In especially advanced cases, a lot of debris accumulates in the connector, for example, as in the image below:

After cleaning the connector, try charging iPad again. If the iPad does not turn on now, we go to the programmatic ways to solve the problem.

Restore iPad in DFU Mode

iPad won’t turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for putting the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.

iPad won’t turn on. restore via DFU mode

Download the latest version of dr.fone utility from the program’s official website.

Install dr.fone and run the utility. At the same time, it is important to close iTunes, as Apple’s program will interfere with the recovery process.

In the main window of dr.fone, select Repair. The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or freezes in recovery mode.

In the window that opens, click Start to start the iPad detection process.

Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this. click the Device is connected but not recognized button.

In a new window, the program will ask you to enter the iPad into DFU mode. For this:

Press and hold the Home and Power buttons at the same time for 10 seconds.

Release the top Power button, but continue to hold the Home button for another 10 seconds. until the utility detects your iPad.

If you did everything correctly, then your iPad will appear in the utility window:

Note that at this stage, dr.fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.

After successfully entering iPad into DFU mode, click Next.

In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.

After the firmware has finished downloading, it remains to press the Fix Now button to start the recovery process. Make sure that the Retain native data checkbox is checked. this parameter is responsible for saving all data on your device.

If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. over, the breakdown can be absolutely any. only in the service center will help to determine what exactly broke.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram. In contact with. Instagram. Youtube.

iPad won’t turn on, apple is on and off

If you are faced with a situation where your favorite iPad does not turn on, the “apple” is on and off, do not rush to carry the device to the service center. There are several ways in which it is possible to restore the tablet to work at home.

Reboot the device

Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps:

  • press the Home and Sleep keys at the same time
  • hold them for 10-15 minutes until the “apple” logo appears on the display
  • wait for the tablet to reboot

This reboot method restores almost all Apple gadgets in case of any software failure. This method is often used after installing a tweak from Cydia or a jailbreak, after which the iPad freezes quite often.

Flashing the gadget via iTunes

This is a rather aggressive way to deal with software bugs, but if the iPad “hangs on the apple” and stubbornly does not turn on, then flashing is the last thing you can try at home. The bad method is that you run the risk of erasing all or part of the data on your device after updating the iPad. This will happen if you have not backed up iPad to iTunes in the recent past.

Re-flashing in situations where the iPads freeze when turned on is performed in several stages:

  • install the latest version of iTunes on your computer
  • connect to the PC iPad, which turns off or constantly reboots on the “apple”
  • select the appropriate device type in the program settings and wait for the program to download the latest software version for it
  • simultaneously press and hold the power and Home buttons on the iPad. an “apple” will appear on the iPad screen, which will go out
  • follow the instructions in the iTunes dialog that opens on the PC screen

The program will prompt you to set up an iPad that is frozen and does not turn on as brand new (with a return to factory settings and a complete loss of all data) or restore the last backup.

Charging check

The very first thing to do, if the iPad does not turn on, the “apple” lights up, then goes out, is to check the state of charge of the device. It is possible that you missed the signal on the iPad screen that its battery is in a low state. At the same time, the charging icon itself may not blink. the iPad will react to a full discharge with a completely black display, on which the apple logo will appear for only a second. Even if the tablet “hangs on an apple”, the cause of the malfunction may be the same.

  • connect an iPad, which has an “apple” on and then turns off, to a “native” charger (charging from phones, iPad mini and other Apple gadgets is not suitable)
  • wait at least 20 minutes
  • start iPad again
READ  How to turn off call blocking on iPhone

The use of the “native” charger is extremely important. Analog chargers are capable of overheating the iPad while it is connected to the network, which leads to various problems in its operation. Incorrectly used iPads freeze when turned on and stop charging at all. IPhone and iPod freeze in the same way.

If after charging your iPad still does not turn on, also check that the charging cable and outlet are working properly. connect some other phone or smartphone to them and make sure that they are charging. If gadgets work with this cable and outlet, please go to other iPad recovery methods.

Repair for mechanical damage

All described methods are suitable for home DIY repair of an iPad that is frozen and will not turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.

Additional signs of this are the following interference:

  • when turned on, the screen lights up and flashes
  • there are streaks and other imperfections in the image before it fades
  • the appearing “apple” has a fuzzy white color

If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.

The most profitable option is to entrust the repair of a non-bootable iPad to the Yuda performers. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:

  • solder the dangling cable
  • will replace the broken glass of the screen
  • carry out professional software installation

iPhone 6/7/8 / X stuck when updating iOS 12 / iOS 13 firmware

Many of us believe that the iPhone is stable and free of glitches and freezes. This opinion is wrong. There are many cases of iPhone 6 or iPhone 7 freezing when installing a system update, unresponsive to user input, and won’t turn on. This could be due to a hardware failure, system error, or system malfunction. Quite often this happens when you boot a new system that has not passed the test of time.

iOS 12 just came out, so it’s pretty common to hear complaints from users that iPhone 6/7 freezes when updating iOS 12 via iTunes or over the air and requires an iTunes connection. What needs to be done in this case.

iPhone 6/7/8 / X Stuck When Updating iOS 13 / iOS 12 / iOS 11 Firmware: What to Do

The new iOS 12 software has already begun to be downloaded and installed on iPhone, iPad and iPod Touch. The most common problem that users encountered while installing the firmware. iPhone X / 8/7/7 Plus, SE, 6s / 6s Plus / 6/6 Plus, 5s / 5c / 5, freezes when updating the iOS 12 firmware. the bug appeared regardless of what software was installed. a test version for developers or public testing participants. A similar situation can be encountered during the download of the final version of iOS 12. What if the iPhone freezes while updating the iOS 12 firmware? If you are looking for the simplest solution in this situation, use the Tenorshare ReiBoot program.

What to do if iPhone freezes when updating iOS 12?

First you need to calm down and try to solve the problem on your own. The easiest method is to force restart your iPhone. This is done by simultaneously holding down the HOME button and the power off button. IPhone 7 users should hold down the volume button instead of holding down the HOME button.

If a forced reboot has brought your device back to life, consider yourself fixing the error yourself. If the problem is still not resolved, it’s time to move on to a more reliable and proven method. the Tenorshare ReiBoot program.

Download the Tenorshare ReiBoot program from the official website, install it on your computer and run.

Connect iPhone 6/7 with a USB cable to a work computer.

Click on the active button “Enter recovery mode”. Wait a while for the device to enter recovery mode and iTunes will recognize it. Please note that with Tenorshare ReiBoot you can restore all data on your device, provided that you did not make a backup.

Then click on the “Exit recovery mode” button when it becomes active. iPhone 6/7 will be restarted and ready to go.

Tenorshare ReiBoot is compatible with iOS 12 and earlier mobile platforms. With its help, you can solve not only the problem “iPhone 6/7 freezes when updating the iOS 12 firmware”, but also other system errors. the iPhone is frozen in recovery mode, in DFU mode, iTunes does not recognize the iPhone, etc. You can download Tenorshare ReiBoot for free.

Common types of iPhone diagnostics and troubleshooting

Corrupted firmware

If the hard reset doesn’t work, the firmware might be corrupted. In this case, you need to restore your iPhone.

iOS crashed

If your iPhone has enough battery, you can consider the cause of the iOS crash.

So the next step is to try and fix the problem. make a full reset. For iPhone 6 and earlier, press and hold the Power and Home buttons together for at least 10 seconds until the Apple logo appears. For iPhone 7 / 7Plus, press and hold the Power and Volume Down buttons for at least 10 seconds until the Apple logo appears.

iPhone won’t turn on after iOS 10 / 10.3 update, how to fix it?

I recently updated my iPhone 6 to 10.3 and it was unable to turn on after the update. I tried to connect it to a power source, my computer, but it doesn’t seem to recognize anything. How can i solve this problem? Please help!

As an iPhone or iPad user who has experienced a major iOS software update such as iOS 9, you should be well aware that each software update can lead to some tricky iOS system issues.

iOS device gets stuck in recovery mode, iPhone black screen, Apple logo frozen, etc.

these issues happened again in the latest iOS 10.3 update.

This post will tell you about the reasons iPhone won’t turn on after updating and how to fix it if your iPhone won’t turn on. Now let’s get started.

iPad Becomes Completely Dead Won’t Turn On

Low battery

When your iPhone is completely discharged, it will not respond to touches or attempts to turn on the phone.

Your phone may not have enough battery for the entire update process. So the solution is to simply plug it into a power source and leave it on for an hour. Your device should come back to life. If not, move on to the next trick.

Hardware problem

If you have tried all of the above methods, but your phone still won’t turn on, then something is wrong with the hardware.You should take your phone to the Apple Store and take a professional test.

You can read more on How to Use FoneLab to Fix iPhone Blue Screen of Death.

How to update your iPhone or iPad to the official iOS 11 if it’s iOS Beta

  • Go to Settings → General → Profiles.
  • Select an iOS Beta Profile.
  • Remove the beta profile by clicking Remove profile.
  • Enter your password if prompted and click Delete again.
  • Turn off your iPhone or iPad by holding the power button and sliding the Power off slider.
  • Turn on your iPhone or iPad while holding down the power button.

Have questions?

Do you still have questions about removing the beta version of iOS and installing the official one? Leave them in the Комментарии и мнения владельцев and I will answer them.

Updated September 2017: Updated for iOS 11.

iOS 12: New features and supported phones

With iOS 12 open public beta available to iOS users and upcoming iPhones (rumored to be iPhone 9 and iPhone XS, or maybe iPhone 11), it seems like the right time for Apple’s truly new features to be ready to go.

Naturally, as with any pre-release firmware, create any precious data ahead of time after installation.

Apple’s upcoming release is not making any radical changes to the user experience on its devices, but rather focuses on improving performance on older iOS phones and tablets, as well as putting more emphasis on healthier smartphone use.

Where is device control located on iOS and other versions

IPhone device control. where is it? Usually, this setting item is hidden from the user, it is available only for developers. Therefore, to open and find it, you need to install configuration profiles. They give users a whole range of new opportunities.

New developments often frighten users because of the increased risk of data loss due to software inaccuracies. There is a high probability of falling into the hands of scammers and intruders. There is a fear that some of the data may be lost.

In fact, everything is not so scary and largely depends on the owners of Apple devices themselves, their attentiveness, caution. You should not download dubious profiles, trust unknown people, and perform all operations only from the developer’s official website, where he provides official and secure versions.

Support.Apple.com/iPhone/restore on the screen. how to remove

Everything that interests you is collected on one page. Find answers or contact support.

Before you start

I write about this in almost every tutorial, and I’ll say it again: Back up your iPhone before you start. It is worth spending a few minutes to save the data than to regret later if something goes wrong.

How to Activate Old iPad after Update: How to Fix iOS 3 Activation Error

iOS 9.3 launched in April 2016 and brought a number of new features including password protection in Notes and Night Shift. But some owners of older iPads fell into a trap trying to turn their devices back on after completing an update.

Users received the following error message:

Your iPad cannot be activated because the activation server is temporarily unavailable. Try connecting your iPad to iTunes to activate it, or try again in a couple of minutes. If the issue persists, contact Apple Support at

Your iPad cannot be activated because the activation service is temporarily unavailable.

Many users did as it was indicated in the first message, but faced disappointing results. One user posted on Apple’s discussion forums that they connected to iTunes hoping to fix the problem, but received a different error message:

iTunes was unable to verify your device. Please disconnect and reconnect your device. If the error persists, contact your nearest Apple Store for help. To find your nearest Apple Store, click here.

Other users followed these instructions and delivered their devices to the Apple Store. but in at least one case, the employee who was handling the complaint was completely dumbfounded. And yet others will not be able to access the Apple Store or find it inconvenient.

Fortunately, Apple has released additional tips for those in this situation. Here’s how to fix a bricked iPad. most likely an iPad 2. that won’t turn on after installing iOS 9.3. You will need a PC or Mac or access to one. This is based on Apple’s official advice, but we have added a few of our own Комментарии и мнения владельцев that we hope will be helpful.

Connect your iPad to your Mac or PC. (Interestingly, Apple admits that some iPad owners may not actually own a PC or Mac and advises them to visit an Apple Store or authorized reseller and use their capabilities. Of course, this is not the best solution if the nearest retail outlet is a few miles away) At this point, it would be nice to back up your iPad, either locally or to iCloud, but if your device is completely unresponsive, you won’t be able to do that.

READ  It may take a few minutes for ipad to activate

Open iTunes and make sure you have the latest version. (At the time of this writing, this is iTunes 12.3.3.)

Restart your iPad (still connected) by pressing and holding the Power (Sleep / Wake) and Home buttons at the same time. Keep holding them until you see the recovery mode screen. You may need to keep pressing them longer than you think: the screen will go black and then after a few seconds the Apple logo will appear, but you need to hold the buttons for another 10 seconds or so until the iPad enters recovery mode.

You will be given the option to restore or update in iTunes. Select Update.

According to Apple, iTunes will now try to reinstall iOS “without erasing your data.” At the time of writing, the iOS version to be installed is iOS 9.3, but don’t worry. there shouldn’t be any issues this time. (Well, Apple admits this step may not always work. Advises that if the update process takes more than 15 minutes, your iPad will exit recovery mode and you will have to repeat steps 2 and 3.) One user reports seeing a message about the error again during this process, but says that you should ignore it and wait.

ALL iPads Fixed: Not Rebooting, Black Screen, Won’t Turn On (2 Ways)

After the update is complete, leave iPad connected to your computer. Now you need to complete the process of setting up activation for your iPad using iTunes.

That’s Apple’s advice, but Apple forum user ottoindo (which we’ve already quoted a couple of times) adds a few extra steps that might help if the official method doesn’t work for you. We have renumbered them to match the steps above, but otherwise we quote ottoindo verbatim:

6b. After iOS 9.3 download completes, you will need to retry.This time, your iPad will ask if you want to restore it.

After the restore is complete, you will be asked to choose whether you want to activate the iPad as a “new” device or restore it from the latest backup. Choosing a new iPad option will format your iPad to look like new, and restoring it will bring your data back again.

fix iPhone lock after iOS 14 update using iTunes / Finder

If iOS 14 update locks your iPhone / iPad, try restoring your bricked iOS device to normal using iTunes or Finder.

Connect your locked iPhone / iPad to your computer via USB cable.

Launch iTunes (Windows PC and macOS Mojave and earlier) or Finder (Catalina and later) and click Refresh to return your locked iPhone / iPad to normal.

This is the traditional method for fixing iOS system errors using iTunes, but it may not be 100% effective. If you don’t want to use the workable UkeySoft FoneFix software, you can try regular update / restore using iTunes or Finder.

Hard reset iPhone or iPad with brick

Force reboot. This is a common method for fixing various iOS freezes, with its help it is easy to jump out of a locked device. When your iPhone / iPad locks up on / after updating to iOS 14, the first thing you can try. this will force restart the device.

For iPhone 8 and later, iPad without Home button: Press and release the Volume up button Press and release the Volume down button Press and hold the Side button until you see the Apple logo screen.

For iPhone 7 and iPhone 7 Plus: Press and hold the Volume Down and Sleep / Wake buttons at the same time until you see the Apple logo screen.

For iPhone 6s and earlier, iPad with Home button and iPod touch: Press and hold the Power and Home buttons simultaneously until you see the Apple logo screen.

Usually your iPhone / iPad will restart normally. Otherwise, you should try part 2 of this article to find a more efficient solution.

fix iPhone brick after iOS 14 update with UkeySoft FoneFix (no data loss)

UkeySoft FoneFix provides users with the perfect solution to fix system problems for all iPhone, iPad, iPod touch and Apple TV models. It can successfully fix iPhone / iPad problems blocked by iOS 14 update such as black screen, boot loop, stuck on Apple logo, stuck in recovery / DFU mode, iPhone keeps restarting, blue screen of death, iPad won’t turn on, etc. No matter what situation you find yourself in, you can quickly and safely restore your locked iPhone / iPad to normal without data loss with just a few simple clicks.

UkeySoft FoneFix software features

  • Fix Locked iPhone, iPad to Normal Quickly.
  • 2 Modes to Repair Locked iPhone / iPad: Standard Mode and Advanced Mode.
  • Easily Fix iOS 14 Update Stuck Issues on iPhone / iPad.
  • Also fix freeze issues when downgrading iOS 14 on iPhone / iPad.
  • Suitable for over 30 iOS, iPadOS and Apple tvOS system problems.
  • One click to enter or exit recovery mode on iPhone / iPad.
  • Only fix your iOS back to normal, no data loss.
  • Supports all iPhone, iPad, iPod touch and Apple TV models.
  • Fully compatible with the latest iOS 14.

How to fix the bricked iPhone or iPad iOS 14 update

Justin Sabrina Updated on October 19, 2020

“The iOS 14 update just locked my iPhone X when I tried to update new software. How can I fix my bricked iPhone X? “

IPhone / iPad lock problem often occurs when iOS system update. Likewise, we’ve received complaints from many iOS users that their devices are locked. After updating to iOS 14, iPhone stopped responding and became inoperable. Why does iPhone freeze after iOS 14 update? And How To Fix iOS 14 Update Blocking iPhone or iPad?

iPhone stuck on Apple logo after updating to iOS 14? Does the Connect to iTunes screen appear when updating to iOS 14? IOS 14 update causing iPad to freeze in recovery mode and unresponsive? iPhone stuck in boot loop after iOS 14 update? As they say, the simpler, the harder it is. Upgrade to iOS 14 on iPhone / iPad. simple process, but the device is easily blocked due to update failure. Instead, the iPhone gets stuck on Apple logo / black screen / blue screen / white screen, recovery mode / DFU mode, boot loop, continuing restart, etc., and you cannot access the locked device normally.

Why iPhone / iPad became brick after iOS 14 update?

A broken iPhone means your iPhone becomes unresponsive and cannot be controlled. A locked iPhone / iPad appears when performing an update to iOS 14 / 13.7 / 13.6 / iOS 13.5 or any other version. Your bricked iPhone didn’t actually complete the update, it just froze, but you can’t use your device normally. Apple’s service system can be easily damaged, especially when a new system is released on the first day, so we recommend that you do not update your iOS system on the first day. There are many types of iPhone / iPad blocks. If you are not sure if your iOS device is locked, you can check:

iPhone / iPad won’t turn on iPhone / iPad stuck on Apple logo iOS device stuck on black screen with spinning wheel iPhone / iPad stuck in recovery mode iPhone / iPad stuck in boot loop iPhone / iPad stuck on white screen of death

If you come across the above situation, iPhone / iPad will be locked. Here we present 4 Ways to Fix Locked iPhone / iPad after iOS 14 Update These methods are suitable for iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone XS, iPhone XS Max, iPhone X, iPhone 8/8 Plus, iPhone 7/7 Plus. iPhone 6s / 6s Plus and iPad Pro / Air. / Mini too.

Tutorial: Fix iPhone or iPad with iOS 14 Update without Data Loss

Launch UkeySoft FoneFix on Mac or Windows PC. Download this UkeySoft FoneFix software on your Windows PC or Mac, then install and launch it. Connect your iPhone to your computer with a USB cable and wait for the software to recognize your device. Then select “Standard Mode” to fix locked iPhone after iOS 14 update without data loss.

Put your bricked iPhone into recovery mode. Then follow these steps to put iPhone into recovery mode.

For iPhone 8 and later, iPad without Home button: Press and quickly release the Volume Up button. Then quickly press and release the volume down button. Now press and hold the power button until you see the recovery mode screen.

For iPhone 7 and iPhone 7 Plus: Press and hold the side and volume down buttons at the same time until you see the recovery mode screen.

For iPhone 6s and older, iPad with Home button: Press and hold the Home and Power buttons at the same time. Keep holding until the recovery mode screen appears.

As you can see, UkeySoft FoneFix downloads the firmware package for your iPhone / iPad.

Fix bricked iPhone / iPad after iOS 14 update without data loss After downloading the firmware, click the Start button to start fixing the locked iPhone.

Finally, after fixing this issue, your iPhone or iPad will restart normally. If not, you can choose Advanced Mode, which is suitable for troubleshooting more serious iOS system problems.

fix iPhone lock after iOS 14 update in recovery mode

You may not know that iTunes Restore Recovery Mode can be used to recover a locked iPhone or iPad. If iPhone becomes bricked after upgrading to iOS 14, you can manually put your phone into recovery mode by following these steps and then use iTunes recovery function. Let’s start now.

Put iPhone / iPad into recovery mode:

For iPhone 8 and later, iPad without Home button: Press and quickly release the Volume Up button. Then quickly press and release the volume down button. Now press and hold the power button until you see the iTunes logo.

For iPhone 7 and iPhone 7 Plus: Press and hold the side and volume down buttons at the same time until you see the iTunes logo.

For iPhone 6s and older, iPad with Home button: Press and hold the Home and Power buttons at the same time. Keep holding until you see the iTunes logo.

Connect your iOS device to iTunes on your computer. If you have a Mac, use the Finder. ITunes now detects that your device is in recovery mode and you will be prompted to update or restore your device as shown in the screenshot below.

Click “Restore” to start fixing locked iPhone / iPad with iOS 14 update using iTunes. Please be aware that all iPhone data will be erased after recovery. If you have ever had an iCloud or iTunes backup, you can restore the backup to your device immediately.

That’s all for how to fix iOS 14 iPhone or iPad update bricks. UkeySoft FoneFix. the best choice for users, because no one wants to face the risk of data loss. Of course, we always recommend that you back up your data before performing iOS 14 update or downgrade operations in case of data loss. If you are sorry and want to go back to the original system, UkeySoft FoneFix is ​​suitable for downgrading iOS 14 to iOS 13 without data loss. If you’d like to learn more, you can skip to the How to Downgrade iOS 14 section. Hope you get the answers you want here. If you have any questions, please let us know as soon as possible. Thank you.

What to do if iPad won’t turn on

Greetings, dear users and undoubtedly happy owners of an iPad. an Apple tablet computer based on the iOS operating system (at the time of this writing, the latest version is the eighth). If you are the happy owner of any gadget from Apple, for example iPad (2,3, Mini, Air), then most likely you are already accustomed to its stable and reliable operation, and for you the fact that the gadget does not turn on leads to dead end.

READ  How to take a screenshot on iPad 4

Those people who have never used tablet computers other than iPad (2,3, Mini, Air), probably, do not know that during the operation of the device any difficulties or problems may arise, for example, the device does not turn on.

In today’s article, we will analyze the situation when the iPad (2,3, Mini, Air) does not turn on. Those. the device does not react when the “turn on” button is pressed, and even an apple on a glass, black screen does not light up.

Faced such a situation? Do not rush to panic and look for a screwdriver to disassemble your iPad (2,3, Mini, Air), in general, I strongly advise you not to disassemble the tablet computer yourself if you have problems, you cannot fix the situation, but you can even worse to do. over, if the iPad (2,3, Mini, Air) does not turn on, then this problem in ninety-nine percent of cases can be solved, literally, in five minutes. Below I will tell you what actions you need to take for this.

My iPad Won’t Turn On! Here’s The Real Fix.

Method 2

The next step that needs to be taken to reanimate your Apple device (in fact, this method can bring back to life not only the iPad (2,3, Mini, Air) tablet computer, but also the iPhone smartphone) is to press and hold two buttons at the same time: button power on / off device and the Home button (the round button at the bottom of the inside of the Apple device). Press and hold these two buttons simultaneously for at least ten seconds. If after this time the apple does not burn, then go to the next way to make iPad work.

If the apple is on fire, then everything is in order (the gadget turns on), and your iPad or iPhone smartphone will start working after a certain amount of time (a few seconds).

Method 1

I, of course, assume that now there will be a lot of disgruntled exclamations, but believe me. the action described below is the first thing to take in a situation where your iPad (2,3, Mini, Air) cannot be turned on. Perhaps it just ran out of battery power. If you have not tried this method to “reanimate” your device, then do it right now. connect your tablet computer to a power outlet.

If this method did not help and the device does not turn on, go to heavier artillery.

Method 3

If the previous method did not help and the device still does not turn on, then use a more radical method, namely, restoring the iOS operating system using iTunes. This is done very simply, follow the steps described below:

  • Connect your device (iPad tablet or iPhone smartphone) to a personal computer using a USB cable, this cable must be included with the Apple device;
  • ITunes must be installed on the computer to which you connect the device. If this program is not on your personal computer, then you need to install it. You can do this by following this link. http://www.Apple.com/iTunes/;
  • Launch iTunes, then press the CTRLS key combination and select your device in the appeared side menu. Go to the “Overview” tab, now on your Apple device, hold down the buttons: home and on / off. Do not release the buttons for about ten seconds;
  • Next, a window will appear in the program in which you will be prompted to restore the iOS operating system.

Attention: when restoring the operating system on your device, you act at your own peril and risk, the author of this material is not responsible for your actions.

Method 4

If none of the proposed methods helped you, then only one thing remains. take your device to a service center.

That’s all for today, I hope now your iPad (2,3, Mini, Air) or iPhone turns on without problems.

Repair for mechanical damage

All described methods are suitable for home DIY repair of an iPad that is frozen and will not turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.

Additional signs of this are the following interference:

  • when turned on, the screen lights up and flashes
  • there are streaks and other imperfections in the image before it fades
  • the appearing “apple” has a fuzzy white color

If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.

The most profitable option is to entrust the repair of a non-bootable iPad to the Yuda performers. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:

  • solder the dangling cable
  • will replace the broken glass of the screen
  • carry out professional software installation

Any iPad model that reboots on an apple will work like new after the update. If your iPad does not turn on, the “apple” is on and off, leave a request for repair at youdo.com.

Malfunction of tablet elements

Another reason why the iPad does not turn on may be a malfunction of the gadget.

Switching to DFU mode

It is worth noting that this is a more extreme way out of the situation when the apple is on, but the iPad does not turn on. There are two methods for entering a gadget into a special mode.

Second option

If the first method did not work. the iPad still does not load, the apple is on, you can try the second method. This method is considered more literate, but it is a little more difficult for new users of Apple devices:

  • We connect the device to the PC and launch iTunes.
  • Turn off the device and wait until the shutdown process is completed correctly.
  • We press on the “Power” button, and after three seconds. “Home”. Hold the keys at the same time.
  • After 10 seconds, release the power button, but continue to hold “Home”.

At the end of the procedure for entering the special mode, a message will appear in the iTunes application that the program has found your device in a recovery state. However, you will need to restore your iPad before using it with iTunes at the same time.

The same procedure can be performed in the case when the iPad 2 does not turn on, the apple is on.

IPad recovery

The most radical solution to the problem when the iPad is not turned on is to flash and restore it. In addition, this option is the last one that a user can apply at home.

Please note that creating a backup copy at this stage is impossible, therefore, if shortly before the breakdown it was not created automatically or manually, then the user runs the risk of losing all files without the possibility of recovery.

In a situation with a non-working tablet, only iTunes will help you reset the iPad and set it up as new.

  • Using a USB cable, connect your iPad to your computer and open iTunes.
  • Click on the device icon on the top bar.
  • Press and hold the Power and Home buttons. An apple icon will appear on the screen, which will go out almost immediately.
  • In the opened iTunes dialog box, click “Restore iPad”. “Restore and Update”. Please note that after flashing the device will have the latest version of iOS installed.
  • After rebooting the device, the system will prompt the user to configure it as a new one or restore data from a backup.

How to change flash memory on iPad

To access the NAND memory module, it is necessary to almost completely disassemble the device. In particular, separate the motherboard from the case.

As soon as the motherboard is removed, the faulty microcircuit is dismantled, observing strict temperature conditions. It is important to prevent overheating of components, for which special equipment and heating are used.

The old memory module is “soldered” from its place on the motherboard

Preparing contacts for installing a new microcircuit

Then the old memory module is placed in the programmer. The specialist checks whether information can be read from him in order to transfer it to a new microcircuit. If the memory module is completely defective, you cannot read the technical information from it, to which the serial number of the device and other data belong.

Reading information from the NAND flash memory module on the programmer

Before installing a new microcircuit, you can choose whether to increase the memory on the iPad or not. You can either simply replace the memory module with a new one, or install a microcircuit with a larger capacity. We recently talked about how it’s done.

The information has been extracted and can now be written to the new memory module. For this, professional equipment is used. Without the transfer of technical information, the iPad will not work with the new chip. The new memory module is checked on the programmer, then prepared for installation (BGA balls are restored) and placed on the board.

Before assembling, the engineer always checks the power consumption of the board and its start without peripherals, and also connects the board (yes, only the board!) To the computer to check the DFU mode. The device is flashed, which allows you to once again identify memory errors if any.

The board starts up with normal power consumption

Additional diagnostics after replacing flash memory

Only after that the motherboard is mounted in place, and you can proceed to reassembly. The screen is installed, all the cables and the battery are connected.

Reassemble in reverse order

If the device turns on but freezes during the boot process

If you see the Apple logo or a red or blue screen during startup, follow these steps.

  • Connect your device to your computer. On a Mac with macOS Catalina 10.15, open the Finder app. On a Mac with macOS Mojave 10.14 or earlier, or on a Windows computer, open iTunes.
  • Find your device on your computer.
  • With your device connected, follow the instructions below.
  • On iPad models that do not have a Home button: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Press and hold the top button until the device starts to reboot. Continue holding the top button until the device enters recovery mode.
  • IPhone 8 and later: Press and quickly release the Volume Up button. Press and quickly release the volume down button. Then press and hold the side button until the recovery mode screen appears.
  • IPhone 7, iPhone 7 Plus, and iPod touch (7th generation): Press and hold the Top (or Side) and Volume Down buttons at the same time. Keep holding them until the recovery mode screen appears.
  • IPad with Home button, iPhone 6s or earlier, and iPod touch (6th generation) or earlier: Press and hold the Home button and the Top (or Side) buttons at the same time. Keep holding them until the recovery mode screen appears.
  • When prompted to perform a repair or update, select Update. The computer will try to reinstall iOS or iPadOS without deleting data.

The software for the device will be downloaded. If it takes more than 15 minutes, the device will exit recovery mode and have to repeat steps 2 and 3.

BYRGPUB.COM 2021