Table of Contents

Check the cable and charging adapter

First of all, you need to make sure that the iPad has stopped turning on, not due to a low battery. Many will be surprised, but often the problem is really that the iPad is completely discharged, but does not charge due to a broken cable or charger.

Making sure the problem isn’t with the accessories is pretty easy. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the following methods.

Make sure the iPad connector isn’t clogged

It is also not uncommon for the iPad to not charge, and at the same time does not turn on, due to the fact that the charging port of the tablet is clogged. This happens most often on old tablets that have been in active use for several years.

Clean the charging port, for example with a toothpick. It is important to proceed with care and use gentle strokes to remove accumulated debris from the connector. In especially advanced cases, a lot of debris accumulates in the connector, for example, as in the image below:

After cleaning the connector, try charging iPad again. If the iPad does not turn on now, we go to the programmatic ways to solve the problem.

Enter iPad into Recovery Mode

The next effective way to solve the problem is to activate Recovery Mode on iPad. Successfully Putting iPad Into Recovery Mode To Bring It Back To Life With iTunes.

In order to enter iPad into recovery mode, follow these steps:

Press and hold the Home button on iPad and connect the tablet to the computer using a USB cable.

Continue holding the Home button until the iTunes logo appears on the iPad.

If the iPad reacted and entered recovery mode, you will have the opportunity to restore the tablet to work.

After entering iPad into recovery mode, you need to launch iTunes. As soon as the program starts, it signals that the iPad is found and suggests updating or restoring the device.

First of all, you need to try to update the iPad, as in this case it will be possible to get rid of the problem without losing data. However, if your iPad has previously been updated to the latest version of iOS, then, of course, it will not be possible to update it.

In this case, all that remains is to select the “Restore” item. After restoring, iPad will start to turn on, but all data on it will be deleted. This method is only recommended if you’ve recently backed up your iPad data.

Why the screen went blank

If your iPad fell and the screen does not turn on, then the reason most likely lies in mechanical damage to one of the modules. Chips and cracks on the case or display confirm this. The screen unit, as the largest element of the device in terms of area, is most often damaged. If there are no other breakdowns, then it is simply replaced in the conditions of the service center.

It is quite simple to check the performance of other modules. restart the device while holding down the “Power” and “Home” buttons. If there is sound, but the image still does not appear, contact the specialists.

  • discharged battery of the gadget;
  • mechanical damage to the “Switch on” button;
  • damage to the motherboard;
  • short circuit;
  • software glitches.

Note. If the tablet screen extinguished due to moisture or after dropping the device into water, do not try to turn it on, and immediately contact the service center.

% discount on iPhone repair

Anyone who signs up by phone or leaves a request

Phone (multichannel): 8 (812) 389-54-66

iPad is recognized as the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, for example, the tablet may stop turning on. What to do if iPad won’t turn on? In this manual, we talked about the most effective and efficient ways to solve the problem.

iPad won’t turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last. at one of the stages, your iPad will work again!

iPad mini screen won’t turn on

Falling as a result of careless handling, short circuit due to water ingress or failure of one of the apparatus modules turns it into a “brick”. What to do if iPad has a black screen and the device won’t turn on? Let’s try to figure out the causes and remedies for the malfunction.

Restore iPad in DFU Mode

iPad won’t turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for putting the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.

iPad won’t turn on. restore via DFU mode

Download the latest version of dr.fone utility from the program’s official website.

Install dr.fone and run the utility. At the same time, it is important to close iTunes, as Apple’s program will interfere with the recovery process.

In the main window of dr.fone, select Repair. The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or freezes in recovery mode.

ipad, mini, turn

In the window that opens, click Start to start the iPad detection process.

ipad, mini, turn

Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this. click the Device is connected but not recognized button.

ipad, mini, turn

In a new window, the program will ask you to enter the iPad into DFU mode. For this:

Press and hold the Home and Power buttons at the same time for 10 seconds.

Release the top Power button, but continue to hold the Home button for another 10 seconds. until the utility detects your iPad.

If you did everything correctly, then your iPad will appear in the utility window:

ipad, mini, turn

Note that at this stage, dr.fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.

After successfully entering iPad into DFU mode, click Next.

ipad, mini, turn

In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.

ipad, mini, turn

After the firmware has finished downloading, it remains to press the Fix Now button to start the recovery process. Make sure that the Retain native data checkbox is checked. this parameter is responsible for saving all data on your device.

ipad, mini, turn

If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. over, the breakdown can be absolutely any. only in the service center will help to determine what exactly broke.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us on Instagram. Viber.

iPad is recognized as the best and most reliable tablet. Even older iPads perform well after years of heavy use. However, iPad may experience crashes, for example, the tablet may stop turning on. What to do if iPad won’t turn on? In this manual, we talked about the most effective and efficient ways to solve the problem.

iPad won’t turn on? All the most effective ways to solve this problem are described below. We recommend that you follow one by one from the first to the last. at one of the stages, your iPad will work again!

Check the cable and charging adapter

First of all, you need to make sure that the iPad has stopped turning on, not due to a low battery. Many will be surprised, but often the problem is really that the iPad is completely discharged, but does not charge due to a broken cable or charger.

It’s easy to make sure the problem isn’t with the accessories. Try charging another device, such as an iPhone, using the cable and charging adapter. If charging starts, then the accessories are not damaged and you can proceed to the following methods.

Flashing the gadget via iTunes

This is a rather aggressive way of dealing with software bugs, but if the iPad “hangs on the apple” and stubbornly does not turn on, then flashing is the last thing you can try at home. The bad method is that you run the risk of erasing all or part of the data on your device after updating the iPad. This will happen if you have not backed up iPad to iTunes in the recent past.

READ  How to set parental controls on iPad

Re-flashing in situations where the iPads freeze when turned on is performed in several stages:

  • install the latest version of iTunes on your computer
  • connect to the PC iPad, which turns off or constantly reboots on the “apple”
  • select the appropriate device type in the program settings and wait for the program to download the latest software version for it
  • simultaneously press and hold the power and Home buttons on the iPad. an “apple” will appear on the iPad screen, which will go out
  • follow the instructions in the iTunes dialog that opens on the PC screen

The program will prompt you to set up an iPad that is frozen and does not turn on as brand new (with a return to factory settings and a complete loss of all data) or restore the last backup.

Reboot the device

Another way to restore any Apple smartphones, when the iPad does not turn on, the “apple” is on and off “, is to reboot the device. This is done in three steps:

  • press the Home and Sleep keys at the same time
  • hold them for 10-15 minutes until the “apple” logo appears on the display
  • wait for the tablet to reboot

This reboot method restores almost all Apple gadgets in case of any software failure. This method is often used after installing a tweak from Cydia or a jailbreak, after which the iPad freezes quite often.

iPad won’t turn on, apple is on and off

And get the best deals from trusted masters.

  • Compare and choose the best conditions
  • Feedback from interested professionals only
  • Don’t waste time communicating with intermediaries

If you are faced with a situation where your favorite iPad does not turn on, the “apple” is on and off, do not rush to carry the device to the service center. There are several ways in which it is possible to restore the tablet to work at home.

Charging check

The very first thing to do, if the iPad does not turn on, the “apple” lights up, then goes out, is to check the state of charge of the device. It is possible that you missed the signal on the iPad screen that its battery is low. At the same time, the charging icon itself may not blink. the iPad will react to a full discharge with an absolutely black display, on which the apple logo will appear for only a second. Even if the tablet “hangs on an apple”, the cause of the malfunction may be the same.

  • connect the iPad, which has an “apple” on and then turns off, to a “native” charger (charging from phones, iPad mini and other Apple gadgets is not suitable)
  • wait at least 20 minutes
  • start iPad again

The use of the “native” charger is extremely important. Analog chargers are capable of overheating the iPad while it is connected to the network, which leads to various problems in its operation. Incorrectly used iPads freeze when turned on and stop charging at all. IPhone and iPod freeze in the same way.

If after charging your iPad still does not turn on, also check that the charging cable and outlet are working properly. connect some other phone or smartphone to them and make sure that they are charging. If gadgets work with this cable and outlet, please go to other iPad recovery methods.

IPad Mini not turning on Solution

Repair for mechanical damage

All described methods are suitable for home DIY repair of an iPad that is frozen and will not turn on, provided that the damage to the device was not mechanical. If your tablet has turned off and no longer boots after it fell, then the reason for the constant reboot of the device may be an interrupted cable.

Additional signs of this are the following interference:

  • when turned on, the screen lights up and flashes
  • there are streaks and other imperfections in the image before it fades
  • the appearing “apple” has a fuzzy white color

If your iPad goes out due to mechanical damage, do not repair the device yourself. Try restarting your tablet or charging it as described above, then flashing the device. If none of the methods helped, and the iPad restarts and goes dead, take it to the service center.

The most profitable option is to entrust the repair of a non-bootable iPad to the performers of Yud. They will restore the tablet, which does not turn on and does not charge, as quickly as possible right at your home:

  • solder the dangling cable
  • will replace the broken glass of the screen
  • carry out professional software installation

Luck and Health Blog

A lucky man. this is a person who did what others were only going to do. Jules Renard

ipad, mini, turn

(http://www.doviendi.ru/wp-content/uploads/2014/05/iPad.jpg) The iPad Mini is dead and does not turn on. what is the reason?

Today, many can no longer imagine their life without the use of tablets. And this is understandable, because with their help you can watch a movie, read a book, and play a good toy. This is great fun while traveling, and for many it is also an irreplaceable assistant in their work. However, like any modern technology, iPads are prone to various breakdowns and sometimes cause problems to their owners.

Often iPad Mini users complain that the device runs out of power and stops turning on. It happens for everyone in different ways: someone is discharged to zero, and someone simply has not turned on the device for a long time. But the result is the same for all. the tablet does not respond to the Power button and does not turn on. Often the reason for the unwillingness to turn on is the freezing of the tablet computer. The solution to the problem will be a forced reboot, for which you need to simultaneously press the Home and Power buttons. They should be held until the tablet begins to show signs of life and the Apple logo. an apple. appears on the screen. If this procedure did not help and the iPad did not turn on, then you need to carry out the procedure for restoring the tablet through the iTunes application.

Another solution to the problem would be to completely discharge the tablet, for which you need to put it on charge and wait a few hours. It does not mean at all that the device will work immediately after turning it on, but if charging and restarting the device did not help, then you need to take the iPad mini retina (http://www.ifeelgood.ru/ipad_mini_2_service) to repair “”, where the service center specialists will conduct comprehensive diagnostics and identify the exact reason for the failure of the device from work.

Experienced experts say that one of the reasons why the iPad Mini does not turn on is a malfunction of the connector, which happens from some kind of mechanical damage. Moisture on the connector can also lead to corrosion of the contact and the failure of the tablet. Such a malfunction is eliminated in the workshop within an hour.

When the lower cable breaks or an important power microcircuit fails, this can also be the reason for refusal to work. Replacing the microcircuit is the most difficult operation and will take more time from the master, because you need to break the integrity of the tablet and completely disassemble it. The reason may be a broken or incorrect firmware of the iPad Mini, as a result of which the user sees only the black screen of the device. You can fix the problem only by completely reinstalling the operating system.

Whatever the reason for the refusal of the tablet, it is not recommended to repair it at home, since often after such an intervention, it is more difficult and much more expensive to resume the full operation of the device, and sometimes it is simply impossible. Therefore, you need to entrust this work to professionals.

If iPad is dropped and won’t turn on

ipad, mini, turn

If, after a fall or a strong blow, your precious Apple tablet stops turning on and generally shows signs of life. then this article is for you! Today you will learn about possible iPad breakdowns after a fall, as well as options for repairing and restoring its performance. Looking ahead, we want to draw your attention to the fact that we will talk about hardware failures, because contrary to popular belief, software failures in such cases are quite rare.

On the Internet, you will find many “clever” tips for rebooting and programmatically restoring the iPad after a crash. You should not trust them, because in most cases, when falling, it is the mechanical damage to the internal parts of the tablet that occurs. On handicraft advice, such as: “Check if your iPad is charged”, we will also keep silent, as a matter of course. Really, it is very strange, having let the tablet go on the asphalt, plug it into a power outlet in order to check if it is discharged. Remember, if the iPad fell and stopped turning on, or began to work intermittently. the reason is purely technical!

Repair iPad after a fall

If we take, for example, the statistics of malfunctions associated with the fall of the tablet, then the problems with the screen will be in the first place. The iPad display breaks, becomes covered with a network of cracks, and the sensor stops working. But today we will consider the case if the screen still survived, but the tablet stopped turning on. In this case, the most common cause is: disconnection or damage to the system cable of the device, damage to the power connector, breakdown of the motherboard. You need to understand that when hitting, the thinnest elements first of all suffer: loops, connectors, contacts. The worst outcome is if the motherboard gets cracked, or components (transistors, capacitors, etc.) fall off from it.

It is almost impossible to install a broken iPad on your own, so contact our Apple Pro service center or St. Petersburg! You will receive professional and, most importantly, absolutely free diagnostics, after which the state of the device will become clear. Based on the results of the inspection, the service specialists will offer you the most optimal repair options and, possibly, replacement of the iPad screen glass. We are waiting for your visit, rest assured that the problem with the non-working iPad will be successfully solved!

Why iPad home button isn’t working

There are many factors that can cause the iPad Home button to stop working. Even if your Home button is unresponsive, it is possible that there are no hardware problems at all. When you press a button on your iPad, this is the software that tells your device to complete the task.

So you may just run into a small software glitch when your iPad Home button is not working.

How to Get Rid of iPad Home Button Not Working Effectively

There are countless reports on the web of people experiencing problems that the iPad home button stops working. No matter what you do to keep your iPad safe and sound, there is still a chance that the Home button will suffer the effects of normal wear and tear. Beyond hardware, software issues can cause the Home button on iPad to work abnormally.

In this article, we will show you 6 tips to solve this problem effectively.

How to fix iPad home button not working

Apple introduced a virtual home button to the iPad. You can head to Settings General Accessibility AssistiveTouch to enable it. To fix Home button on iPad not working you can try the tips below.

repair iPad home button in portrait / landscape orientation

It’s hard to explain why, but portrait and landscape orientations can solve the problem that the Home button on iPad does not work.

Step 1 Keep pressing the Home button while your iPad is in portrait orientation.

Step 2 While holding down the button, turn on iPad in landscape orientation.

Step 3 Then turn the iPad back to portrait mode. Make sure your iPad screen is rotating when switching between modes.

Step 4 Then release the Home button. Your iPad 2 home button should now work.

Get rid of iPad button doesn’t work with 5-finger gesture

Multitasking. This is an important iPad feature to fix a variety of issues, including the unresponsive Home button.

Step 1 Turn on AssistiveTouch on your iPad, tap Device. Yet. Gestures and select finger gesture 5.

Step 2 Tap the screen to enter the multitasking screen and release all background apps.

Step 3 Now try the Home button on iPad to see if it works now.

home cleaning button

The Home button is open, so it inevitably accumulates dust and debris. This can cause the Home button on iPad to stop working. The solution is simple: clean the Home button with a cotton swab. Remember you must do it carefully.

One-Stop Way to Fix iPad Home Button: FoneLab iOS System Restore

If you tried the above tips and the Home button on iPad still works, FoneLab iOS System Restore can help you get rid of the problem.

FoneLab allows you to transfer iPhone / iPad / iPod from DFU mode, recovery mode, Apple logo, headphone mode, etc. to normal without data loss.

  • Fix Disabled iOS System Issues.
  • Extract data from disconnected iOS devices without data loss.
  • It’s safe and easy to use.

Bonus: iPad data backup

If your iPad won’t turn on, it means something is wrong with your device. There is a chance that your data will be lost during troubleshooting. That is why we recommend FoneLab iOS Data Backup & Restore.Its main features are:

One-click iPad backup.

Support contacts, call history, messages, photos, video, audio, etc.

Preview your data on your iPad and select specific files to back up.

Don’t interrupt existing data on your iPad.

Make backups for iPad 5/4 / Pro / Air / mini and earlier devices.

Add a password to your backup to prevent other users from seeing your data.

Recover Lost Data on Your iPad Easily.

In short, it is the best option for making a backup when you are solving an issue that iPad does not include.

How to Back Up iPad Data Easily

Step 1 Install the best iPad backup tool

Install FoneLab on your computer and open it. There is another version for Mac computers. Choose iOS Data Backup Restore to Launch the Best iPad Backup Tool.

Step 2 Preview your data on iPad

Tap on the iOS data backup option and then connect your iPad to your computer. This will be recognized automatically. Select Standard backup or Encrypted backup and reset your password. Click the Start button to go to the data type window. Here you can choose which data you want to save.

Step 3 Backup iPad in one click

Finally, click the Next button to start the process.

In a few seconds, you will receive a congratulatory message. Now you can safely correct the error.

You may be interested in: How To Effectively Fix Mac That Won’t Turn On

Equipment check and recharge

First of all, you need to make sure that all of your iPad’s hardware is working well, especially the battery. Then connect your iPad to a power source using the original cable.

If the iPad battery is completely discharged, a red low battery icon appears. The iPad usually has more battery than the iPhone, so you need to charge it for at least an hour. It will come back automatically. Remember to charge iPad using the USB cable from your computer. IPad takes longer to charge.

Force restart iPad

ipad, mini, turn

Some people have reported that their iPad won’t turn off when they open a certain app. We always suggest that you get apps from the Apple App Store, in part because apps from unknown sources can cause a lot of problems like iPad freezing. The simplest solution. force restart iPad.

Press and hold the power button, which is usually located in the upper right corner, and then press the Home button. Keep pressing them until your iPad vibrates and the Apple logo appears. Then your iPad will restart and you can get rid of the problem.

How to fix an issue where iPad 5/4 / Pro / Air / mini won’t turn on

I remember a blue screen flash right after my iPad went black and then my iPad wouldn’t turn on no matter how I press the power button, how to fix it?

The most common reason for disconnecting an Apple tablet. discharged battery.

Most of the time, your iPad will spontaneously suspend processes if you don’t use it for a few minutes, but some active apps prevent it. This will drain your iPad’s battery. In fact, it still consumes battery power even when your iPad is in sleep mode.

This post will show you what you can do when iPad won’t turn on.

DFU restore iPad

A more dramatic solution to get rid of an issue that iPad Mini doesn’t include. recover DFU on iOS device.

Step 1 Hold down the Power and Home buttons on the device at the same time. Release the power button while continuing to hold the Home button for a while when the Apple logo appears.

Step 2 Next, connect your iPad to your computer and launch the latest iTunes. When prompted, click the “Recover” button to start recovering iPad in DFU mode.

Note: As the warning message says, restoring will delete all your media and other data on your iPad.

Alternatively, you can reset iPad restore your iPad to its original point. However, you must do it carefully, because it will erase all data and settings permanently.

Put iPad into Recovery Mode.

ipad, mini, turn

As the name suggests, Recovery Mode is an essential troubleshooting solution for iOS devices. To fix an issue where iPad won’t turn on, you need a computer, the latest iTunes, and a Lightning cable.

Step 1 Open iTunes and connect one end of the Lightning cable to your computer.

Step 2 Press the iPad Home button and connect the other end of the cable to the iPad. Release the Home button after iTunes detects your device.

Step 3 iTunes will then detect the error and advise you on the correct solution, such as updating the software. You can follow the instructions on the screen to solve the problem simply.

In this tutorial, we talked about what you can do if your iPad won’t turn on. Many facts can lead to black screen on iPad. However, you can fix the problem without seeking technical support. Before troubleshooting, you’d better back up your iPad using FoneLab iOS Data Backup Restore. Not only is it easy to use, it also allows you to efficiently back up your iPad.

How can I speed up my iPad? You can find out the reasons why iPad is slow and how to speed up iPad in this post.

Meeting the iPad with the white screen of death? Explore this article and find the best iOS system recovery fix to get iPad back to normal.

When your iPad freezes constantly, you should know various methods to solve the problems with the best solutions from the article.

IPad won’t turn on? It’s not worth worrying. there is always a way out!

iPad is a functional device that works on the basis of the modern operating system iOS.

Like any other technology from Apple, iPad tablets are distinguished by high performance and reliability, ease of use and stability of work. But still, sometimes there are cases when difficulties arise during the operation of these devices. These include situations when the gadget stops responding to its control or simply does not turn on.

If the traditional apple logo does not appear on the iPad screen when you press the power button, do not panic and jump to conclusions. over, you should not immediately disassemble the gadget on your own to correct the situation. Such actions can aggravate the situation and entail serious negative consequences.

iPad mini suddenly won’t turn on? Change Power Management ic

What to do if iPad won’t turn on?

In most cases, this complexity can be resolved in just a few minutes. Consider several effective ways to solve this problem.

  • Sometimes the reason that the tablet stopped turning on can be a banal battery discharge. At the same time, simply connecting the tablet to a power source can help solve a seemingly insoluble problem. If this method did not lead to the desired results, then you can proceed to using the following methods.
  • The method described below is suitable for bringing back not only iPads, but also iPhones. It consists in simultaneously pressing and for a long. at least 10 seconds. holding the Home button and the on / off key of the device. If an apple logo appears on the screen of the device, it means that your gadget will soon start functioning normally.
  • If all of the above methods did not help solve the problem with the iPad, then a more radical method should be applied: restoring the operating system of the device using iTunes. To do this, you must follow these steps:
  • connecting the tablet to a computer using a USB cable that comes with Apple iPad;
  • installing iTunes software;
  • launching iTunes. This is followed by a transition to the tab, which is called “Overview”, and the simultaneous pressing of two keys. Home and the on / off button with holding them for 10 seconds.
  • iOS recovery.

If all the above methods did not lead to anything, then the only correct way out would be to contact the experienced craftsmen of a professional service center. Competent masters of the iFix SC will be happy to help you resume your iPad. With our help, your tablet will quickly turn on again and work like a clock.

IPad won’t turn on. What to do?

Sooner or later, some part of iPad users are faced with such a problem. Their iPad won’t turn on. over, this attack does not bypass users of both the first tablet models and the newfangled iPad Air, iPad mini 2, etc. What to do in such cases? Let’s try to figure it out together.

To answer the question, we need to try to understand why this could happen.

The most commonplace reason is that the iPad is discharged to zero (the battery has run down). As a rule, in such cases, the iPad has enough charge to show you an empty battery (but sometimes we don’t even see that). In any case, if you see only a black screen, I advise you to connect your iPad to a power source and wait at least 5-10 minutes (Apple recommends charging at least 20 minutes) for it to charge at least a little. After that try to enable.

If a red battery appears on the screen, this is a sure reason that the iPad is low. Just charge it. If it does not charge, then try changing the power source (change the USB input, if charging from a computer, change the outlet, change the wire, etc.)

The second most popular reason is that iPad won’t turn on after jailbreak (or installing some tweaks from Cydia). And the third reason is that there was some kind of unexpected glitch in the system (as a rule, this does not happen by itself, so this happens less often). Often this is accompanied by the appearance of a white apple on the screen or a wire, hinting about the need to connect to iTunes.

In both cases, I recommend the following algorithm of actions:

a) Hard restart iPad. To do this, press the Home and Power buttons at the same time on the iPad. Wait about 10 seconds. Even if there was an apple (or any other image) on the screen at that moment, it will disappear. This means you have completely turned off the iPad.

b) If after a hard reset the iPad still does not turn on, then only restoring the iPad will help you. In other words, a complete flashing of the device. But do not rush to run to the service, this procedure can be done at home.

If you are not strong in this topic, then I recommend reading the articles:

These three articles are enough for you to feel confident and restore your iPad without any problems.

The only caveat is that after the restore, you will lose all your data if you don’t make a backup. Be sure to try making a backup in iTunes on your computer, if possible and the iPad allows you to do it (article on backups).

If iPad still won’t turn on

If all else fails, then you need to contact an Apple service center for a solution to the problem. Apparently, something serious happened to your tablet. In this case, I can only wish you good luck

iPad Becomes Completely Dead Won’t Turn On

How to start iPad?

To turn on your device: Press and hold the power button at the top of your iPad until you see the apple logo. This means the device is booting. Enjoy!

What to do if iPad mini won’t turn on?

This is very easy to do. you need to perform a so-called “hard” reboot. To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).

How to set up iPad from scratch?

  • Press and hold the top button until the Apple logo appears. If your iPad won’t turn on, you probably need to charge it. For more help, see
  • Do one of the following: Tap Configure Manually and follow the onscreen instructions.

How to turn on iPad for the first time after purchase?

First, turn on the devices by holding the power button on the side. After switching on, the display will show a greeting in several languages. Accept the terms of the user agreement.

  • Activate cloud storage.
  • Next, you will be prompted to activate the important function of finding your device in case of loss.

Why iPad charges very slowly?

Causes of the problem and how to fix it

purchase of an inappropriate charging model or cable; using an adapter from the “American” input to the “European”; constant discharge of the battery, which is highly discouraged; prolonged iPad inactivity.

How to restart iPad mini?

  • Press and hold any of the volume buttons and the top button until the Turn off slider appears.
  • Move the slider and then wait 30 seconds for the device to turn off.
  • To turn the device back on, press and hold the top button until the Apple logo appears.

Method 3

If the previous method did not help and the device still does not turn on, then use a more radical method, namely, restoring the iOS operating system using iTunes. This is done very simply, follow the steps described below:

  • Connect your device (iPad tablet or iPhone smartphone) to a personal computer using a USB cable, this cable must be included with the Apple device;
  • ITunes must be installed on the computer to which you connect the device. If this program is not on your personal computer, then you need to install it. You can do this by following this link. http://www.Apple.com/iTunes/;
  • Launch iTunes, then press the CTRLS key combination and select your device in the appeared side menu. Go to the “Overview” tab, now on your Apple device, hold down the buttons: home and on / off. Do not release the buttons for about ten seconds;
  • Next, a window will appear in the program in which you will be prompted to restore the iOS operating system.

Attention: restoring the operating system on your device, you act at your own peril and risk, the author of this material is not responsible for your actions.

Method 2

The next step that needs to be taken to reanimate your Apple device (in fact, this method can bring back to life not only the iPad (2,3, Mini, Air) tablet computer, but also the iPhone smartphone) is to press and hold two buttons at the same time: button power on / off device and the Home button (the round button at the bottom of the inside of the Apple device). Press and hold these two buttons simultaneously for at least ten seconds. If after this time the apple does not burn, then go to the next way to make iPad work.

If the apple is on fire, then everything is in order (the gadget turns on), and your iPad or iPhone smartphone will start working after a certain amount of time (a few seconds).

Method 1

I, of course, assume that now there will be a lot of disgruntled exclamations, but believe me. the action described below is the first thing to take in a situation where your iPad (2,3, Mini, Air) cannot be turned on. Perhaps it just ran out of battery power. If you have not tried this method to “reanimate” your device, then do it right now. connect your tablet computer to an outlet.

If this method did not help and the device does not turn on, go to heavier artillery.

What to do if iPad won’t turn on

Greetings, dear users and undoubtedly happy owners of an iPad. an Apple tablet computer based on the iOS operating system (at the time of this writing, the latest version is the eighth). If you are the happy owner of any gadget from Apple, for example iPad (2,3, Mini, Air), then most likely you are already accustomed to its stable and reliable operation, and for you the fact that the gadget does not turn on leads to dead end.

Those people who have never used tablet computers other than iPad (2,3, Mini, Air), probably, do not know that during the operation of the device any difficulties or problems may arise, for example, the device does not turn on.

In today’s article, we will analyze the situation when the iPad (2,3, Mini, Air) does not turn on. Those. the device does not react when the “turn on” button is pressed, and even an apple on a glass, black screen does not light up.

Faced such a situation? Do not rush to panic and look for a screwdriver to disassemble your iPad (2,3, Mini, Air), in general, I strongly advise you not to disassemble the tablet computer yourself if you have problems, you cannot fix the situation, but you can even worse do. over, if the iPad (2,3, Mini, Air) does not turn on, then this problem in ninety-nine percent of cases can be solved, literally, in five minutes. Below I will tell you what actions you need to take for this.

Method 4

If none of the proposed methods helped you, then there is only one thing left. to take your device to a service center.

That’s all for today, I hope now your iPad (2,3, Mini, Air) or iPhone turns on without problems.

BYRGPUB.COM 2021