Make sure the iPad connector isn’t clogged

It is also not uncommon for the iPad to not charge, and at the same time does not turn on, due to the fact that the charging port of the tablet is clogged. This happens most often on old tablets that have been in active use for several years.

Clean the charging port, for example with a toothpick. It is important to proceed with care and use gentle strokes to remove accumulated debris from the connector. In especially advanced cases, a lot of debris accumulates in the connector, for example, as in the image below:

After cleaning the connector, try charging iPad again. If the iPad does not turn on now, we go to the programmatic ways to solve the problem.

Charger

The first and most common reason iPad won’t turn on is low battery power. The tablet just turns on for a split second, the Apple logo appears on the screen, then everything goes out. In this case, the low charge icon may not appear, the user will only see a black screen.

The solution is very simple. connect the iPad to the network using the charger and wait 10-20 minutes. During this time, the battery will be able to consume enough energy to turn it on again. Then start iPad again.

It is important to connect the iPad to a power source only through the “native” charger. If possible, do not use chargers from iPhone and other iPad models, as well as any analogs. They often overheat the tablet, and this can cause damage to the tablet itself. In the screenshot below, you can compare what the iPad and iPhone adapters look like.

If, after charging for 20 minutes, iPad still does not turn on, check the functionality of the USB cable and / or outlet itself. Use them to connect another phone or tablet and see if it charges. If so, move on to other solutions to the problem.

Enter iPad into Recovery Mode

The next effective way to solve the problem is to activate Recovery Mode on iPad. Successfully Putting iPad Into Recovery Mode To Bring It Back To Life With iTunes.

In order to enter iPad into recovery mode, follow these steps:

Press and hold the Home button on the iPad and connect the tablet to the computer using a USB cable.

Continue holding the Home button until the iTunes logo appears on the iPad.

If the iPad reacted and entered recovery mode, you will have the opportunity to restore the tablet to work.

After entering iPad into recovery mode, you need to launch iTunes. As soon as the program starts, it signals that the iPad is found and suggests updating or restoring the device.

First of all, you need to try to update the iPad, as in this case it will be possible to get rid of the problem without losing data. However, if your iPad has previously been updated to the latest version of iOS, then, of course, it will not be possible to update it.

In this case, all that remains is to select the “Restore” item. After restoring, iPad will start to turn on, but all data on it will be deleted. This method is only recommended if you’ve recently backed up your iPad data.

How to turn on iPad if it won’t turn on?

Restore iPad in DFU Mode

iPad won’t turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for putting the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.

iPad won’t turn on. restore via DFU mode

Download the latest version of dr.fone utility from the program’s official website.

Install dr.fone and run the utility. At the same time, it is important to close iTunes, as Apple’s program will interfere with the recovery process.

In the main window of dr.fone, select Repair. The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or freezes in recovery mode.

In the window that opens, click Start to start the iPad detection process.

Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this. click the Device is connected but not recognized button.

In a new window, the program will ask you to enter the iPad into DFU mode. For this:

Press and hold the Home and Power buttons at the same time for 10 seconds.

Release the top Power button, but continue to hold the Home button for another 10 seconds. until the utility detects your iPad.

If you did everything correctly, then your iPad will appear in the utility window:

Note that at this stage, dr.fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.

After successfully entering iPad into DFU mode, click Next.

In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.

After the firmware has finished downloading, it remains to press the Fix Now button to start the recovery process. Make sure that the Retain native data checkbox is checked. this parameter is responsible for saving all data on your device.

If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. over, the breakdown can be absolutely any. only in the service center will help to determine what exactly broke.

READ  How to connect iPad to TV via HDMI

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram,. Instagram Viber, Zen.

Rate: (4.54 out of 5, rated: 26) Loading

Hard reset iPad

Let’s start with the simplest way to bring the iPad back to life, which is often a lifesaver. It’s not uncommon for iPad to not turn on due to a software error that needs to be reset. This is very easy to do. you need to perform a so-called “hard” reboot.

To do this, on the iPad, you need to simultaneously hold down the Home and Power buttons and hold them until the Apple logo appears on the tablet screen (10-15 seconds).

If the Apple logo appears, the iPad is saved! The tablet will turn on and work as before. If the “hard” reboot did not lead to anything, then you should proceed to the following methods.

ipad, turn

IPad recovery

The most radical solution to the problem of not turning on the iPad is to reflash and restore it. In addition, this option is the last one that a user can apply at home.

Please note that creating a backup copy at this stage is impossible, therefore, if shortly before the breakdown it was not created automatically or manually, then the user runs the risk of losing all files without the possibility of recovery.

In a situation with a non-working tablet, only iTunes will help you reset the iPad and set it up as new.

  • Using a USB cable, connect your iPad to your computer and open iTunes.
  • Click on the device icon on the top bar.
  • Press and hold the Power and Home buttons. An apple icon will appear on the screen, which will go out almost immediately.
  • In the opened iTunes dialog box, click “Restore iPad”. “Restore and Update”. Please note that after flashing the device will have the latest version of iOS installed.
  • After rebooting the device, the system will prompt the user to configure it as a new one or restore data from a backup.

IPad won’t turn on. What to do?

Sooner or later, some part of iPad users are faced with such a problem. Their iPad won’t turn on. over, this attack does not bypass users of both the first tablet models and the newfangled iPad Air, iPad mini 2, etc. What to do in such cases? Let’s try to figure it out together.

To answer the question, we need to try to understand why this could happen.

Fix An Ipad That Won’t Turn On Or Start-Easy Ipad Tutorial

The most commonplace reason is that the iPad is discharged to zero (the battery has run down). As a rule, in such cases, the iPad has enough charge to show you an empty battery (but sometimes we don’t even see that). In any case, if you see only a black screen, I advise you to connect your iPad to a power source and wait at least 5-10 minutes (Apple recommends charging at least 20 minutes) for it to charge at least a little. After that try to enable.

If a red battery appears on the screen, this is a sure reason that the iPad is low. Just charge it. If it does not charge, then try changing the power source (change the USB input, if charging from a computer, change the outlet, change the wire, etc.)

The second most popular reason is that iPad won’t turn on after jailbreak (or installing some tweaks from Cydia). And the third reason is that there was some kind of unexpected glitch in the system (as a rule, this does not happen by itself, so this happens less often). Often this is accompanied by the appearance of a white apple on the screen or a wire, hinting about the need to connect to iTunes.

In both cases, I recommend the following algorithm of actions:

a) Hard restart iPad. To do this, press the Home and Power buttons at the same time on the iPad. Wait about 10 seconds. Even if there was an apple (or any other image) on the screen at that moment, it will disappear. This means you have completely turned off the iPad.

b) If after a hard reset the iPad still does not turn on, then only restoring the iPad will help you. In other words, a complete flashing of the device. But do not rush to run to the service, this procedure can be done at home.

If you are not strong in this topic, then I recommend reading the articles:

These three articles are enough for you to feel confident and restore your iPad without any problems.

The only caveat is that after the restore, you will lose all your data if you don’t make a backup. Be sure to try making a backup in iTunes on your computer, if possible and the iPad allows you to do it (article on backups).

If iPad still won’t turn on

If all else fails, then you need to contact an Apple service center for a solution to the problem. Apparently, something serious happened to your tablet. In this case, I can only wish you good luck

Fix iOS bugs

Another way to recover iPad is to use a third-party program that fixes errors in iOS devices and DFU mode. By using this option, the user will not lose important data. In this article, we will look at how to work with dr.fone.

  • Connect iPad to computer and open dr.fone. Close iTunes as it will interfere with recovery.
  • Click “Repair”.
  • Click on “Standard Mode”. This function will allow you to correct some system errors and not delete data from the device. However, the user can take advantage of the advanced mode “Advanced Mode”, where a larger list of problems is eliminated, but all data from the iPad is deleted.
  • In the next window, the user will see an inscription that the device is not connected. First we have to put it into DFU mode. Click “Device is connected but not recognized”.
  • Press and hold the Power and Home buttons for 10 seconds. Then release the Power button, but continue to hold the Home button for another 10 seconds. Wait for the iPad to be detected by the program.
  • In the window that opens, click “Next”. “Download”. “Fix Now”. Make sure that the checkbox next to “Retain native data” is checked, which ensures the safety of data on the tablet.
READ  How to Remove Activation Lock on iPad

How to avoid future problems

It may sound like a cliché, but prevention is better than cure. Here are two tips to prevent your iPad from getting locked out of the wrong password:

  • Remember your password or disable it. If you don’t have sensitive information on your iPad, it’s best to just turn off password usage. This is done in the “Settings” “Screen and brightness” “Auto-lock”. Or write down the code and store it somewhere.
  • If you’re going to give your iPad to kids, disable the passcode or change the default auto-lock time from 30 seconds to 1, 2, 3, 4, or 5 minutes. Where to do this is described in the paragraph above.
ipad, turn

0: Check if there is a progress bar on the screen

If there is a progress bar under the apple, your device is either installing a system update or repairing itself. In this case, do nothing and wait for the process to complete.

Connect the tablet to a power source and do not touch it until the process is complete.

If this is a software update, your iPad will automatically reboot after installation. You may have iOS auto-update enabled and your tablet decided to download the update now. Do not interrupt its download.

If there is no progress indicator, then the tablet is really frozen. Follow the steps below to fix it.

Moisture ingress

If an apple appears when you turn it on, and then the screen turns off immediately, the cause may be moisture on the tablet. If this was the case, take the tablet immediately to the nearest service center. Specialists will disassemble, dry, clean, test for performance. You shouldn’t do all this yourself, as you can make it even worse. During cleaning, specialists will be able to identify and eliminate other possible problems, if any.

The situation when an apple appears and then disappears from the screen can be associated with other problems, malfunctions, including insufficient battery charge.

Using EaseUS iPhone Recovery

This program allows you to restore iPad from iCloud backup without using iTunes. It will come in handy if for some reason you cannot connect iPad to iTunes.

  • Download software for Mac or Windows from the links. Windows, Mac.
  • Once you have downloaded and installed EaseUS on your computer, run the file and select “Recover from iCloud” on the left panel.
  • Select a backup and click the “Scan” button to download it to your computer.
  • After the scan is complete, you will be prompted to select the data you want to recover.

When you have selected everything you need, click the Recover button to restore data, applications and documents to the disabled iPad.

iPad won’t turn on or charge

If your iPad won’t turn on or charge, you need to understand the reason for this behavior. Situations like this occur quite often. Finding out what happened is, in principle, not difficult. The malfunction can be caused by:

  • General malfunction of the tablet computer. you will have to contact the service center;
  • Battery malfunction. contact the service center to replace the battery;
  • Faulty cable or charger. you need to check their integrity and, in case of failure, purchase new ones.

As practice shows, at home we can only do the last of all of the above.

What to do if iPad won’t turn on

Sometimes the owners of iPads face a problem when the device does not turn on or the apple icon just lights up on the screen. There are several reasons for a possible breakdown, some of which can be solved at home without contacting a service center.

The problem with turning on the tablet can be caused by several reasons: a breakdown of an internal component or a failure in the system. In the latter case, simple actions that do not require opening the device can help.

Doing a Reset

Laptops, like stationary PCs, appeared on the market much earlier than tablet computer devices. People who have been working at a computer for years know what to do in the event that the equipment is tightly hung up and does not even show signs of restoring their own performance. In this situation, you must press the “Reset” button. It is absent in laptops, so you need to press and hold the power button. After a short time, the laptop turns off. It remains to start it in a new way.

What if the iPad doesn’t want to turn on? Try to force restart your tablet. It is important, however, to ensure that the data stored in the internal memory is not lost. The lack of a Reset button on the iPad is no reason to panic. We will act in a different way. Press the power and Home buttons, hold them for 10 seconds and wait for the tablet to start rebooting. This is evidenced by the appearance of a bitten apple on the screen. After rebooting, iPad will be fully functional.

It is important to understand that although this method of rebooting does not entail the loss of user information, it will not hurt to periodically create backups.

IPad won’t turn on. what to do

Owners of Apple iPad tablet computers consider their technology so reliable that sudden failures and malfunctions plunge people into a stupor. If your iPad won’t turn on, don’t be scared. you can fix any situation. It is quite possible that it did not break, but simply hung, because software breakdowns are not rare. In this review, we’ll go over all situations and figure out what to do if your iPad won’t turn on or charge.

If iPad won’t turn on, then the problem may lie in a low battery level. A deep discharge often results in tablet computers not turning on at all or turning off one to two minutes after starting. Therefore, the first thing you should do in this situation is to put the tablet on charge and leave it alone for several hours. During this time, the battery will charge, and you can try to turn on the iPad again. most likely, a new attempt will be successful.

Have you charged your iPad but it turns out it won’t turn on again? In this case, you need to check the functionality of the charger. It may not provide the required charging current, interfering with the normal charging of the battery. Leaving the iPad on a long charge will have absolutely no effect if the charger is broken. To check the operation of the memory, use another tablet or iPhone. You can also try a different charger on your tablet or even try to recharge from the USB port of your computer.

READ  How to connect headphones to iPad

If you are sure that literally a few hours ago the battery was full, put your tablet on charge anyway. it is possible that the battery was completely discharged in those few hours.

Self-repair and repair in service

On various Internet resources, you can find many tips on how to do your own iPad repair if it does not turn on. We do not recommend using them. The fact is that disassembly, especially assembly, is a complex and painstaking task that requires skills and experience, as well as knowledge. Otherwise, you will cause even more harm to the tablet, which will entail quite large material expenditures. Therefore, you can check the performance of individual units, and entrust the repair to specialists.

iPad won’t turn on or charge

If your iPad won’t turn on or charge, you need to understand the reason for this behavior. Situations like this occur quite often. Finding out what happened is, in principle, not difficult. The malfunction can be caused by:

  • General malfunction of the tablet computer. you will have to contact the service center;
  • Battery malfunction. contact the service center to replace the battery;
  • Faulty cable or charger. you need to check their integrity and, in case of failure, purchase new ones.

As practice shows, at home we can only do the last of all of the above.

Hard reboot

If the tablet turns off and does not turn on, although the user is sure that the charge is sufficient for the device to function properly, you can use a “hard” reboot. This is a forced process that forces the system to discard all operations in progress and restore correct operation. For this you need:

  • simultaneously hold down the “Home” and “Power” buttons;
  • wait until the brand logo appears on the screen;
  • do not turn off the tablet until the process is complete.

If this option does not solve the problem, you may need to contact the service center or resort to recovery via iTunes. Any forced reboot resets all temporary data on the device.

Restore iPad in DFU Mode

iPad won’t turn on despite all the above methods? Fortunately, the most effective way to solve the problem remains. It provides for putting the tablet into DFU mode and restoring its operation using a third-party utility to fix errors for iOS devices.

iPad won’t turn on. restore via DFU mode

Download the latest version of dr.fone utility from the program’s official website.

Install dr.fone and run the utility. At the same time, it is important to close iTunes, as Apple’s program will interfere with the recovery process.

In the main window of dr.fone, select Repair. The utility allows you to fix various errors on iOS devices, including problems due to which the iPad does not turn on or freezes in recovery mode.

iPad 2 not charging? try this.

In the window that opens, click Start to start the iPad detection process.

Since your iPad will not turn on, the program will not detect it until it enters DFU mode. In the next window, the utility will notify you of this. click the Device is connected but not recognized button.

In a new window, the program will ask you to enter the iPad into DFU mode. For this:

Press and hold the Home and Power buttons at the same time for 10 seconds.

Release the top Power button, but continue to hold the Home button for another 10 seconds. until the utility detects your iPad.

If you did everything correctly, then your iPad will appear in the utility window:

Note that at this stage, dr.fone utility has the option to launch an interactive tutorial showing how to properly enter iPad into DFU mode.

After successfully entering iPad into DFU mode, click Next.

In the new window, click Download to start downloading the latest firmware for your iPad. The utility itself will download the required firmware version for subsequent recovery.

After the firmware has finished downloading, it remains to press the Fix Now button to start the recovery process. Make sure that the Retain native data checkbox is checked. this parameter is responsible for saving all data on your device.

If none of the above methods helped, then, unfortunately, we are talking about a breakdown of the iPad. over, the breakdown can be absolutely any. only in the service center will help to determine what exactly broke.

Please rate 5 stars at the bottom of the article if you like this topic. Subscribe to us Telegram,. Instagram Viber, Zen.

articles: (4.54 out of 5, rated: 26, your vote has been added) Loading

Charger

The first and most common reason iPad won’t turn on is low battery power. The tablet just turns on for a split second, the Apple logo appears on the screen, then everything goes out. In this case, the low charge icon may not appear, the user will only see a black screen.

The solution is very simple. connect the iPad to the network using the charger and wait 10-20 minutes. During this time, the battery will be able to consume enough energy to turn it on again. Then start iPad again.

It is important to connect the iPad to a power source only through the “native” charger. If possible, do not use chargers from iPhone and other iPad models, as well as any analogs. They often overheat the tablet, and this can cause damage to the tablet itself. In the screenshot below, you can compare what the iPad and iPhone adapters look like.

If, after charging for 20 minutes, iPad still does not turn on, check the functionality of the USB cable and / or outlet itself. Use them to connect another phone or tablet and see if it charges. If so, move on to other solutions to the problem.

BYRGPUB.COM 2021