Ip Camera Outdoor How to Connect

Posted on : 17.12.2020
Ip Cameras 

How to set up an IP camera: instructions, useful tips

IP camera. It is a digital video camera that can transmit data over Internet protocols on a network. This is a handy device, but in order to get full-featured access to all its options, you will need to make certain settings.

camera, outdoor, connect

An IP camera (outdoor or indoor) can also be described as a camera and a computer combined in one unit. The main components of this device include a lens, an image sensor, one or more processors, and memory. Processors are used for image processing, video compression, and network function analysis. The memory is used for storing firmware (computer program) and for local video recording. Thus, it is not necessary to connect the IP camera to the computer to ensure its smooth operation.

Like a computer, a network camera has its own IP address, connects directly to the network, and can be placed wherever there is an available connection. The IP camera, which is slightly more expensive, independently provides the functions of a web server, FTP (File Transfer Protocol) and e-mail, and also includes many other network and other IP protocols. This differs from a webcam, which can only work when it is connected to a personal computer (PC) via a USB or IEEE 1394 port. over, its software must be installed on a PC.

The current wireless IP camera can be configured to transmit video over the network for live and / or recording, or continuously, by schedule, by event, or by authorized users request. Captured images can be transmitted in Motion JPEG, MPEG-4 or H.264 video using various network protocols, or uploaded as SEPARATE JPEG images embedding FTP, Email or HTTP (Hypertext Transfer Protocol).

In addition to video recording, some manufacturers’ network cameras provide event management and “smart” features such as video motion detection, sound detection, active tampering alert and auto-tracking. Most devices also offer I / O ports, which allow connection to external devices such as sensors and relays, and the IP camera recording can be broadcasted. Other features may include audio capabilities and built-in Power over Ethernet (PoE) support. Many gadgets also support Advanced Security and Network Management. A modern outdoor IP camera allows you to capture high-definition images even in poor visibility conditions.

Connection features

Some IP cameras require an additional recording device, while others can record their videos directly to a NAS (Network Attached Storage) or PC that is configured to function as a server. Some of them even have built-in Micro SD card slots, and can save content directly to this physical medium. They may even have built-in servers, so sometimes you can access the recording remotely. How to configure the IP camera correctly? How should synchronization with the Internet be performed?

Where to begin?

If you are creating your own server, the IP camera software must be selected and you will need to install it yourself. You can connect several recording devices to get a more complete picture of what is happening in the monitored area.

Can alternative gadgets be used?

Instead of using a classic IP camera, you can use a simple “WEB camera” and connect it via USB to a computer running the appropriate recording software. This device is usually cheaper than an IP camera (which is an order of magnitude more expensive), although it may not have Some fundamental features (such as the ability to night vision to record what happens in absolute darkness).

Another difference is that the webcam must be connected directly to the computer via USB, while the IP camera can be located in a completely different place and synchronized via Wi-Fi.

First of all, you need to choose some kind of webcam surveillance software. These applications are used to capture and record video that enters the lens. You should remember that the software for IP cameras (which can control regular “web” ones) may be paid, but you can still achieve some savings.

If you do this, you will have to keep your computer running 24/7, at least if you want to record the events of the whole day.

Smartphone as a capturing device

If you have an old, unused Android phone, you can repurpose it into a camera for network security. After all, any such gadget has a camera, Wi-Fi, and built-in computer functions. All this should be filming, saving and recording video.

Network or IP cameras, in turn, are designed to work in a local area network (LAN) and over the Internet. On the LAN, they are managed within the computer network to which they are attached. With the additional configuration of this local network, you have the ability to allow cameras to monitor Not only local, but also remote, as well as via the Internet. How to set up an IP camera in LAN?

Local access

Before you can configure your camera to work over the Internet, it is recommended that you enable all the desired options for local access first. Review the technical documentation that came with your device for instructions on initial setup. Once the camera is configured for local access, you are ready to start configuring it to access it remotely over the Internet.

Remote access

Before configuring the IP camera in the local network to allow shooting from a remote location, it is recommended to examine the properties of the network administrator to ensure that you have the appropriate authority. Otherwise, you cannot remotely access the camera.

In order to configure the camera to work over the Internet, you will need to configure the Port Forwarding service. It allows you to access the camera from a remote location by forwarding network ports used by the Internet. These ports are usually forwarded to your network router to forward the ports used by the camera.

Obtaining an IP address

In order for the IP camera to transmit data via the Internet, you need to correctly configure the network protocols. To access the router on your network to set up port forwarding, you will need the IP addresses of the router to which the camera is connected. You can get this information by asking your network administrator for your network, or by opening a command prompt in Windows and entering the Ipconfig / all command. To open a command prompt window, you will need to click on the Start button and then proceed to click on Run.

After doing one of the above, you will get the IP address of the router. You will need it in order to access your router to set up port forwarding. The IP address of the network router will be displayed as the default gateway.

Accessing your network router

You will now need to navigate to an accessible router by entering its IP address in your web browser. Then you need to go to the configuration section, where port forwarding is configured.

Enter the local IP address of the camera, as well as its unique name associated with the specific port to be forwarded. As a rule, port 80 is used by default. However, it is advisable to invite information from your device manufacturer for additional configuration details. For example, a wireless IP camera with advanced settings may require more data to enable all options.

Some devices require more than one port to be targeted in order to get all the features offered by the functionality of the gadget. You will also be given the opportunity to choose the protocol which will be used. Common options are UDP or TCP. Your router may also have additional options. In most cases, you will need to select the “Both Simultaneously” protocol option. This will allow UDP and TCP to bind to forwarded ports. Once you have completed entering all the configurable options, click on the “Apply” button to save the selected settings.

Once the settings have been saved in the router’s configuration, you should be able to see this information displayed in the list. There may be other default entries (will be present in the same list). The parameters of your connected device will be at the bottom of it under the heading IP Network Camera.

Internet access

Now that you have configured port forwarding on your network router to allow the camera to access over the Internet, you can start configuring access to control it. It is recommended that you initially try to get it from a remote location and not on your local network. This is desirable to ensure that port forwarding is configured correctly.

How to set up an IP camera finally?

When in a remote location, you will need to enter the public IP address provided by your Internet Service Provider (ISP) in order to be able to access the camera. If you do not know it, contact your provider’s technical support or online services that allow you to determine the details of your Internet connections. You will NOT be able to access the camera using a private IP address as it cannot be seen on the Internet (it is only available within the local network where the device is connected). In addition to entering a public IP address, sometimes you need to enter a port in the address bar. In most cases, port 80 will be redirected automatically, and therefore this period can be left blank when trying to access the camera. However, there are times when the IP camera will not use port 80. If this happens, you will need to enter the full IP addresses followed by a colon and the port number used in the connection.

How to set up and connect an IP CCTV camera?

So, everything you need has been purchased, installed, and you can’t wait to see what happens at home in your absence, while on vacation with a tablet in another country. Therefore the next step. setting up IP video surveillance. For its implementation, it is good to have a general understanding of the construction of computer local and global networks based on IP-addressing. But even without knowing this specificity, the task can be solved. What awaits us? self-configuration of the IP camera.

The capabilities of digital (network) video surveillance cameras allow you to connect them to a network and receive video from them according to the following scheme:

  • Through a router
  • Via computer
  • Through the DVR

We take into account whether a wired camera or transmitting a video signal via a wireless communication channel. In the first case, it is necessary to prepare a patch cord from Category 5 UTP cable (twisted pair). Also, do not forget to install the wireless camera closer to the Wi-Fi access point. And of course, except for the IP settings. remember about the possibility of setting the frame resolution, recording rate, motion schedule (if it is a PTZ camera) and other options available for editing after the video camera is “displayed” on the network.

Before you start connecting the equipment to the network, you need to find out the network settings. This is possible in two ways. Using the data provided by the Internet provider (ISP), or on the computer, select “Start”, type “СMD” in the search bar for programs and files, and in this command line mode, execute the command “ipconfig” (if you do not know how to view the network properties in Microsoft OS ). The data we need. netmask, gateway, local IP address of the computer (for example 192.169.0.11), port number (usually 3128, 80, 8080, etc.).

Setting up IP video surveillance through a router or computer is done either using the software (a CD with the software is included in the delivery package), or through a browser, in the address window of which the standard IP of the device is typed. For example, in Hikvision cameras. 192.168.0.64 (login admin, password 12345). typed in the browser. On the opened browser control page, enter the Given values ​​of the login and password. After that, the IP addresses of the device (constant, usually for access from the Internet), the mask and the network gateway provided by the provider are entered. Note that the installation of IP-video surveillance cameras can be within a local network, where it is necessary to register a pre-prepared route of IP packets on a router or computer for broadcasting video to the Internet from a LAN. An example of such a command in cmd:

Route ADD.P 10.1.1.1 MASK 255.255.255.255 192.168.0.100 METRIC 1

Here 10.1.1.1. video distribution server address (for example, your computer), 192.168.0.100. network camera address. We recommend that you check with Forter’s consultant for more precise commands.

It is much easier when self-configuring an IP camera is reduced to replacing its standard address with one adapted to the local network. THOSE. Change the standard 192.168.0.64 to 192.168.1.100.

When installing IP-addressing via software (for HikVision, for example, SADP), the program after initialization on your PC finds all installed cameras of this manufacturer. After that, you only need to enter the necessary information on the network in the program window. There is software of a universal type that can recognize video cameras from different manufacturers.

When connecting a camera through a DVR, everything is much easier. After connecting the device, in the corresponding register menus, windows will open for editing the IP address, netmask, gateway. We fill them in by analogy with the above values. and you can monitor your object from anywhere in the world!

How to set up and connect a video surveillance IP camera?

So, everything you need has been purchased, installed, and you can’t wait to see what happens at home in your absence, while on vacation with a tablet in another country. Therefore the next step. setting up IP video surveillance. To perform it, it is good to have a general understanding of the construction of computer local and global networks based on IP-addressing. But even without knowing this specificity, the task can be solved. What awaits us? self-configuration of the IP camera.

The capabilities of digital (network) surveillance cameras allow you to connect them to a network and receive video from them according to the following scheme:

  • Through a router
  • Via computer
  • Through the DVR

We take into account whether a wired camera or a video signal transmitting over a wireless communication channel. In the first case, it is necessary to prepare a patch cord from Category 5 UTP cable (twisted pair). Also, do not forget to install the wireless camera closer to the Wi-Fi access point. And of course, except for the IP settings. remember about the possibility of setting the frame resolution, recording rate, motion schedule (if it is a PTZ camera) and other options available for editing after the video camera is “displayed” on the network.

Before you start connecting the equipment to the network, you need to find out the network settings. This is possible in two ways. Using the data provided by the Internet provider (ISP), or on the computer, select “Start”, type “СMD” in the search bar for programs and files, and in this command line mode, execute the command “ipconfig” (if you do not know how to view the network properties in Microsoft OS ). The data we need. netmask, gateway, local IP address of the computer (for example 192.169.0.11), port number (usually 3128, 80, 8080, etc.).

Setting up IP video surveillance through a router or computer is performed either using the software (a disc with the software is included in the package), or through a browser, in the address window of which the standard IP of the device is typed. For example, in Hikvision cameras. 192.168.0.64 (login admin, password 12345). typed in the browser. On the opened browser control page, enter the Given values ​​of the login and password. After that, the IP addresses of the device are entered (permanent, usually for access from the Internet), the mask and the network gateway provided by the provider. Note that the installation of IP-video surveillance cameras can be within a local network, where it is necessary to register a pre-prepared route of IP packets on a router or computer for broadcasting video to the Internet from a LAN. An example of such a command in cmd:

Route ADD.P 10.1.1.1 MASK 255.255.255.255 192.168.0.100 METRIC 1

Here 10.1.1.1. video distribution server address (for example, your computer), 192.168.0.100. network camera address. For more precise commands, we recommend contacting the Forter consultant.

It is much easier when self-configuring an IP camera is reduced to replacing its standard address with one adapted to the local network. THOSE. Change the standard 192.168.0.64 to 192.168.1.100.

When installing IP-addressing via software (for HikVision, for example, SADP), the program after initialization on your PC finds all installed cameras of this manufacturer. After that, you only need to enter the necessary information on the network in the program window. There is software of a universal type that can recognize video cameras from different manufacturers.

When connecting a camera through a DVR, everything is much easier. After connecting the device, windows for editing the IP address, netmask, gateway will open in the corresponding register menus. We fill them in by analogy with the above values. and you can monitor your object from anywhere in the world!

How to connect an IP camera directly to a laptop?

Video surveillance systems have become very popular in recent years. Organize surveillance of your home, office, apartment or plot. means to secure your home or workplace. With the advancement of technology, analog cameras are becoming a thing of the past. Digital IP cameras offer high-quality images and are much simpler and more convenient to use, despite the fact that the cost of analog and IP devices is almost the same.

and more users began to try to figure out how to connect and configure devices on their own. The services of specialists will cost a lot, but resorting to them is not necessary, because you can connect the camera to a laptop and configure the interface yourself.

Attention! The article describes how to connect a digital camera to a laptop if you have an analog CCTV camera. follow the link below.

IP camera connection

You can connect an ip-camera to a laptop directly, but on condition that an equal device is involved. It is enough to have only a “twisted pair”. Ethernet cable. If the ip-camera has such a connector, you should take a USB with a converter.

often, 2, 3, 4, up to 16 cameras are used in the surveillance system. Then the connection is made through a router, which is much more complicated. over, if you need remote access, which allows you to see what is happening in the surveillance area of ​​the camera from anywhere by connecting to the Internet and entering the device address.

However, today you can buy ip-cameras equipped with wi-fi technology. If a wireless module is working on the laptop, just turn on the camera. And in the browser, enter the device address.

If the selected camera is wired, then first of all it must be connected to the power supply and to the network. Then connect the device and laptop with a standard RG45 cable.

Below is a diagram of connecting an ip-camera to a laptop.

Then you need to find out the ip-address of the used ip-cameras. All devices have a unique address assigned by the manufacturer. You can find it in 3 ways:

  • Installed the software that comes with the cameras;
  • I downloaded the utility from the manufacturer’s website;
  • In documents (in a box or label).

However, if you try to open it on the Internet without preliminary configuration. nothing will happen because the laptop and the surveillance device are on different subnets. This needs to be configured by assigning addresses to the laptop in the range 192.168.1.1. 192.168.1.254 but do not match the camera address.

IMPORTANT! If the IP cameras are 192.168.1.1, then on the laptop we put 192.168.1.2 with the mask 255.255.255.0. This is done so that the laptop can see the camera. If the address is 192.168.0.1, then set 192.168.0.2.

For example, let the addresses of the ip-camera be 192.168.1.1.

You can find out the IP address of the laptop as follows: on the Control Panel (control panel, you can call it by clicking start and typing control in the search), open the “Network and Sharing Center”. “Connections”, select the “Ethernet” section, then open the “Information” section. String of IP addresses.

Change the ip-address of the laptop 192.168.1.2. (Since in our example the IP camera addresses are 192.168.1.1)

Open your browser. Now if you enter the specified address in the address period, the image from the camera will appear there. You will also need a password and login.

Important! Any browser is suitable for working with an ip-camera. Pre-configured Internet Explorer should be used.

After starting, click: Service. Internet Options. Safety. There you should select the setting of the nodes, in the line sites add a subnet in which the cameras will function. Can:

  • Register the address as 192.168. ;
  • Enter specific IP address of the camera.

In the security settings, you must also enable all permissions.

How to make an ip camera from a laptop

Many people want to organize video surveillance of their own workplace and strive to install powerful ip-cameras for this, which need to be connected via a router, video recorder or capture camera. This is a reliable and high-quality method, but very expensive. Much easier to use laptop webcam.

You will need to register, after which a window will open with a list of connected devices.

The simplest option, and not allowing, however, View the image on the network. creation of a video archive on the laptop itself. To do this, you should allocate at least 100 GB of space. you just need to locate a folder on your computer and make sure there is enough free space on your hard drive. If there are several cameras for the planned video surveillance system, you can take care of buying a cloud service.

The setup is complete. The program will show a special window and a site where you can view the image from the ip-camera. A great way to keep an eye on your work area or babysit from the next room.

For remote viewing, you can download the application on Android. This will allow you to always be aware of what is happening, even from the phone.

Ivideon is NOT the only program that allows you to organize surveillance through a webcam. You can also use:

  • Abelcam. a paid program that allows you to organize surveillance with one device for free (trial version). Supports all kinds of cameras. The interface for customization is pleasant and easy to understand.
  • Axxon Next. allows you to organize monitoring simultaneously from 16 cameras. The disadvantage is the complex interface. customization will take time and patience. Also there is no possibility to connect high-definition cameras.
  • Globoss. program with a unique ability to use web and IP cameras at once. Only 2 devices can be used for free, in the licensed version a maximum of 12 connections are available. It is possible to organize remote monitoring.

How to properly connect an IP camera

Being more high-tech devices in comparison with conventional webcams, IP cameras contain an Internet server, a network interface and can directly connect to the Internet. Connecting an IP camera through a router is possible via Wi-Fi or by wire (over long distances), power is supplied through the ETHERNET connector.

About the features of the device

IP cameras use web protocol to transmit video signal. These devices are used mainly for surveillance and control systems when guarding various premises, transmitting a video signal through the World Wide Web. The cameras have a digital proximity function and a motion sensor.

Video captured by the IP camera can be viewed from any computer connected to the network. The use of IP cameras is justified when there are a number of video surveillance devices.

Differences between an IP camera and a regular webcam and advantages:

  • Autonomy of work (without the obligatory connection to a PC).
  • Constant monitoring of the protected premises.
  • Full functionality requires a router and an IP address.
  • To see the picture from the camera from any PC on the network, you just need to enter the IP address of the camera in the search bar of your browser.
  • High quality video resolution with zoom capability.

Usually, the installation process takes place simultaneously with the planned renovation of the premises, which makes it possible to lay a cable (at large distances between cameras), but if you are not upset with wires in a conspicuous place, connecting and configuring an IP camera to a computer through a router Possible at any time, here is a choice After you.

It is possible to completely abandon the laying of wires using a Wi-Fi router for IP cameras, but there will already be limitations associated with the distance from the router to surveillance cameras, the presence of obstacles in the form of walls, furniture, because the quality and strength of the Wi-Fi signal is in direct dependence on THESE factors.

Remember that most routers DO NOT distribute a Wi-Fi network over sufficiently long distances, therefore, in order to avoid problems with the quality of the Wi-Fi picture or sound, setting up an IP camera through a router makes sense in small rooms in the area of ​​reliable signal reception by network devices. In all other cases, a wired connection is required.

How to configure an IP camera via a router

So, we got an idea about IP cameras, now let’s figure out how to connect an IP camera to a router.

Choosing a connection method without using a wire or wired.

If we choose the second method, we need a special UTP cable in order to connect the router to the camera. Next, go directly to setting

  • We connect all the elements of the future surveillance system:
  • We enter a special panel for controlling the camera.
  • For this step, we need the IP addresses assigned to our camera to set the same subnet to the computer settings (in most cases, you will find the IP addresses on a special sticker on the bottom of the device or in the product passport). Let’s say the value is 192.168.0.20.
  • Open the “Network Control Center” in the computer (“Start Control Panel Network and Internet”). In this menu, go to “Local Area Connection” and then to “Properties”. In the window “Internet Protocol version 4” make the following settings.
  • So, we have done the subnet setup. The next step is to launch the browser.
  • In the search bar, we drive in the address of the IP camera (192.168.0.20) and enter the necessary data for a successful login (you will also find the data either on the device itself or in the passport).

With just one camera, nothing else is needed. If there are more cameras. move on.

  • We change the IP address depending on the spread of the local network values.

Knowing the address of the router (we are looking for it in a similar way), we set it for our camera, changing the fourth value in it. Let’s say: the address of the router is 192.168.1.2. We select, for example, the camera addresses 192.168.1.11, set the checkbox next to “FIXED IP” and enter the corresponding values.

  • Save all changes, disconnecting the computer and the IP camera.
  • We connect the camera and router via the LAN connector. We set up a LAN connection (if we use a wired connection between a computer and a router). In this step, we set up the auto-acquisition of the IP address and DNS.
  • We find in the WIRELESS menu to ensure the wireless network connection in an automatic manner. Here we need the SSID and password. After that, saving the process and restarting.
  • We disconnect the first camera from the router and connect the rest in order. Their characteristics will be identical, with a difference only in IP addresses and ports. After completing this process, you can start configuring the router itself.

How to connect an IP camera to a router

Different manufacturers have different setting menus, but the general course is about the same: we need a Forwarding menu item (or something similar). To do this, turn on the virtual server and make data entry (see Fig.). If there is more than one camera, then such actions must be carried out for each separate camera.

If you have a static IP address, enter in the search bar of your browser: http: // your address: 8181. After that you will go to the tab showing the view from the first camera.

Usually, by default, everyone has a dynamic address. In this case, Proceed as follows: turn on the DNS client in the WAN menu. For example, ASUS provides its server and its use for free. Otherwise, we may use third-party services (NO-IP and others).

After saving all the set parameters, we can go to the address received during the service registration. Congratulations: From now on you are aware of all the issues of connecting an IP camera to a router via Wi-Fi.

What is a router for?

I work as a private computer foreman. I have been professionally engaged in computer repair for over 12 years, as an amateur since the 90s. For two years she worked as the head of a service center specializing in connecting subscribers to the Internet and computer assistance.

Dahua IP camera setup

Many Owners buyers want to make sure that they can easily connect and configure the equipment before purchasing a video surveillance system.

Sometimes it can be difficult to connect Dahua IP camera by yourself. And the manual that comes with the part can be useless, since it describes everything too complicated.

How to connect dahua ip camera?

  • Before you start installing the software, you need to connect the camera to a router and a power source. This is done using a LAN cable. He will help you set up everything correctly.
  • Then you can start installing the software. Usually a disk with everything you need is attached to the equipment, but if it is not there, then you need to download the Config Tool. This program is necessary to find out the IP-address of the device.
  • We define devices connected to the network. At this stage, you can change the IP address of the cameras.
  • Now you need to open the browser and enter the IP address of the camera and press the enter button. You will see fields for entering your login and password. Enter admin in both terms. If the camera is installed for the first time, the program will ask for the installation of a plug-in in order to view video streams.
  • Next, in the field that appears, open the “Settings”. IP camera. All further settings of the modes, setting the necessary parameters, connecting the IPC will be done through this utility. For example, in order to set the main or additional streaming mode, you need to go to the video tab and using the path tab, you can specify the storage location.
  • If you need to change IP addresses, then click on the “Network” term, it is located on the left side of the screen. Open the TCP / IP tab and enter the new device address. After that, you need to save the new data. If you need to receive an image from a camera to a smartphone, then there you need to open the “Easy4ip” tab and mark “On”. Then the video can be viewed through the application. At the end of the setup, you need to save all changes.
  • If the cameras have a built-in WI-FI module, then in the “Network” tab you need to select “WI-FI”. In this case, when activating the camera, you will need to select a wireless connection. To do this, select your home network. Then enter the password from the router and connect the device. After the camera is connected, its status will say “connected”. After that, the cable is no longer needed, it can be disconnected.
  • Remember! After completing the above steps, you need to restart the Config Tool, re-enter the IP address of the camera in the address bar of the browser and log in. After that, you can continue to configure the equipment.

After the wireless connection mood, you need to correctly set the storage location and video quality. To do this, you need to do the following:

  • In the “Recording and storage” tab you need to set a convenient mode for you. It can be the main one when monitoring from cameras is ongoing or recording by motion sensor and alarm.
  • To select the exact location for storing files, click “Archive storage”, and then “Storage”. Data can be on SD card, FTP, NAS.
  • Also, when connecting an IP-camera, do not forget to set the correct date and time. To do this, open the “System” tab in it, click on “Basic settings”, select “Date / Time” and Install. Here you can also add second users, set rights for them to view images from the camera and access video recordings in the archive.

After you have completed all the above simple instructions, the IP camera can be used. She is absolutely ready to go. Do not look at the seeming simplicity in setting up, many experts advise to entrust this business to professionals if you are NOT sure of your competence. He will be able to correctly configure the equipment and use all the capabilities of the camera so that the device’s operation is as useful and efficient as possible.

Dahua IP camera by default

In order to view the image from the camera, you need to know its IP. In order to find it out, you can use several ways.

For a start, it’s worth looking at the instructions. There they usually write what standard IP addresses are assigned to the camera. If the device has already been used, then there is a possibility that its IP was changed. Then you need to reset the settings to the standard ones. In order to do this, you need to enter the settings and use the “Reset” button.

Secondly, along with the equipment, there must be software, with the help of which the camera is connected to the network, and the necessary settings are made. Using it, you can also change the IP address of the device.

Also, to find out the IP address of the device, use the IP address scanner. This simple program can be used not only for cameras, but also for other devices. To do this, you need to specify the coverage of the address in it, which you want to scan. After that, a list of scanned addresses will appear, and the ones that are available will be marked. If you do not know the IP addresses of the device, then write the interval from 192.168.0.0 to 192.168.255.255, while the program may take a lot of time to scan.

Setting up for remote viewing from an Android mobile device

To follow video streams using your smartphone, you need to install the software on your device. There are many programs designed for THESE purposes, for example, gDMSS Lite.

We launch the application on the smartphone and add a new device. To do this, go to “Devices” and then click P2P and enter any name for the device. After that, you need to enter the serial number of the device in the “SN” line, and in the “User” and “Password” terms, enter the standard password and login “admin”. When you have finished filling out you need to click on the “Display” button, which is located below. After that, the camera should appear on the smartphone.

Configuring Dahua IP Camera for Remote Viewing via Internet

IP cameras connected to the Internet allow you to access the image and monitor wherever you are. To do this, you need to have an external static IP. To find out the network IP addresses, you can use the services of other services. The provider will provide the user with a static address, provided that the IP address specified in the properties of the local connection and the addresses that can be seen on the site are the same. If everything matches, there shouldn’t be any problems with accessing the video stream via the Internet.

If suddenly the IP address is different when connecting to the Internet, then the address is dynamic. Then, if it is impossible to connect the service of a static IP address, you will have to resort to the help of third-party services, such as DynDNS.

In principle, setting up ip cameras for remote viewing using the Internet does not fundamentally differ from setting up local networks. If you have to use special services to work with the device, then you need to Register for them and, possibly, pay some kind of payment, additional configuration may also be required. For example, on DynDNS, you need to change the IP to the one that assigned the service to you. You can also use cloud services to solve problems with dynamic IP addresses.

IP CCTV camera setup: connect and configure

IP camera. a digital video camera that transmits video images in a digital stream over a network. Such a device. it is not just a device connected to a receiver or transmitter, but a full-fledged participant in the network. The camera has the ability to connect via wire or WI-FI, depending on the model. The connection and setup procedure is easy to perform independently. The main thing. know how to do it right.

Difference from a webcam

Webcam and IP device. these are different devices, contrary to the opinion of some users. The webcam mechanism allows you to communicate with other people via Skype or other similar programs. IP device is designed for video surveillance and displaying images in a digital stream.

The IP camera has its own address, through which it connects to the network.

Types of devices

There are several types of IP cameras:

  • Swivel;
  • Cylindrical;
  • Dome;
  • Square;
  • Case.

From non-rotatable Dome and case devices are the most popular.

Depending on the place of use, the following devices are distinguished:

  • Street;
  • Indoor use.

Various types of devices are used for video surveillance. The main thing. install and configure the camera correctly.

Watch the video describing the models of the best PTZ IP cameras for the home:

Where to install?

Correct installation of the IP camera. guarantee of normal operation. Since the device works on WI-FI, it is important that it is located near the router. If you put the device too far away, there will be problems with image transmission and there will be regular failures of a different nature.

However, it is also not recommended to place the camera too close to the receiver to avoid interference with the router. The bottom line. place the device at an average distance from the router.

Connection and configuration

The device is connected to a computer and a video surveillance camera is set up. The installation process goes like this:

  • Fix the antenna;
  • The device is connected to the network;
  • The provider’s network cable connects the device and the computer.

After that, the IP camera is configured:

  • Login to the “Network Control Center” section;
  • Go to the sub-item “Local Area Connection”;
  • Select the “Properties” tab;
  • Open “Protocol version 4”;
  • IP addresses are driven into the corresponding window, which is indicated on the device case;
  • Login to the browser;
  • The address of the surveillance camera is driven into the search bar;
  • Enter the file with device settings;
  • Login and password are entered into the windows, which are indicated on the box from the device.

If only one device needs to be connected to the Internet, the procedure will be completed. If there are several cameras, then they act as follows:

  • Change IP addresses. To do this, put an icon in front of the inscription “Fixed IP” and drive in the data. To perform manipulations, you need router addresses. The same address is set for the camera, but the last digit is changed.
  • Opposite the inscription “Port Number” enter or select the numbers 8181. If there is such a setting, set the value of the WEB port 80 and save.
  • The cable is disconnected from the computer and inserted into the LAN port located on the router. After that, on the computer, they enter the local network connection settings. Clears all parameters, and then ticks the boxes opposite to automatically obtain IP and DNS.
  • Return the patch cord back to the network card. They go to the new device address and enter the username and password in the appropriate columns. After that, go to the “Wireless” sub-item. Enter all the data of the Wi-Fi network. Settings save and reboot the device.
  • The camera is turned off, the second device is connected and the procedure is repeated. The address for the camera is set the same as for the previous device, but the last digit is changed, and the numbers 8282 are entered into the port window.

The camera can be connected to an Android and iOS smartphone. Details in

Setting up on a router

If we talk about how to connect an IP camera to a router, then they do it as follows. Connect the router to the camera. To do this, either use the Corresponding wire, or connect using Wi-Fi.

Port forwarding is done so that the router shows the desired camera when accessing the local network address from the external one. To do this, go to the “Port Forwarding” section or any other similar one. Before that, in front of the inscription “Virtual Server” put an icon.

Then fill in the following columns:

  • Service name. give any name;
  • Port range. assign the value specified above (for the first camera it is 8181, for the second 8282, etc.);
  • Corresponding IP camera addresses;
  • Local port, which was specified during device setup;
  • TCP Protocol and Corresponding Number.

The same manipulations are performed for all devices, changing the data. After that, proceed as follows. In the browser search bar enter the following data: “http: // static_external_provider_address: 8181”.

If the IP address is dynamic white, then the procedure is performed through the DynDNS service. To do this, proceed as follows:

  • Enter the router settings;
  • Go to the “WAN” sub-item;
  • Select the “DDNS” tab;
  • Put a check mark in front of the “Yes” in the “Enable DDNS” column, set the Corresponding parameters and save them.

Camera connection via router completed.

For instructions on installing and configuring a video surveillance system, see the video format:

Configuration via utilities

Another way to set up your IP camera. through a proprietary utility. To do this, use a disk that was included in the set of the device. The first thing to do. connect all CCTV cameras to the network through a router. Further steps depend on the brand of the device.

Configuring the camera through utilities will be covered through a model from TRENDnet. The disk of such a device is equipped with two programs.

Ipsetup

It can be used to change the factory settings. The program is installed on the PC, after which a window appears on the screen, where all cameras that are connected to the device are indicated. Their name and address are indicated.

After the window appears, perform the following manipulations:

  • Click the cursor on the camera name;
  • The device is given its own name and authorized;
  • Set new IP addresses according to the range used in the local network.

After that, in the search window of the browser, you can set a new IP address of the device and configure the device accordingly:

  • In the “Network” menu, the main parameters are configured;
  • Section “Event Config” allows you to configure the motion detector and control it;
  • The “Event Setting” menu allows you to configure E-mail or FTP, where the data in the recording from the CCTV camera is received;
  • Section “Shedule Profile” allows you to set a schedule for the device so that the device operates at a specified time or around the clock.

Securview

With the help of such a program, you can add all images to one control panel, which are displayed in the “Live View” menu in the web interface, where one image is displayed from each device.

To do this, perform the following manipulations:

  • Install the program and run the application;
  • Enter the “Settings” menu;
  • In the “Camera List” item one of the devices is selected;
  • Click on the “Add Camera” button;
  • Enter the login and password of the device in the corresponding columns.

This manipulation is performed for all cameras. This will allow you to receive an image simultaneously from all devices.

P2P device setup

You can choose an alternative P2P camera, where P2P. it is a peer-to-peer communication protocol. Benefits:

  • Multifunctionality;
  • High rate of fault tolerance;
  • Easy to install and easy to customize;
  • Lack of binding to a static address;
  • The ability to use various devices for video playback;
  • Available depending on distance.

To configure the device, perform the following manipulations:

  • Download and install software that is compatible with the OS of the computer or the second device on which the viewing will be performed;
  • The camera is fixed and turned on;
  • The device is connected to the Internet using a wire or Wi-FI;
  • Start the program on the computer and enter the device ID code in the search window;
  • Enter the camera password in the corresponding fields.

Knowing how to set up an IP camera, you can independently perform all the relevant manipulations and carry out video surveillance of the object of interest. The main thing. follow the instructions above.

We hope that you will not have any problems while installing and configuring CCTV cameras. If you still have questions, write, we will try to answer as soon as possible. Thanks to all!

BYRGPUB.COM 2023