How to install Windows 10 on Asus X540 Laptop. Enable USB Boot in Bios Settings

Training ( )

If the installed operating system still allows you to work, there are three fundamentally important steps to take first:

Prepare the necessary drivers (for a video card, network). Having them, it will be possible to find the rest of the elements in the future.

Check your computer for viruses with Comodo Internet Security or AVG AntiVirus Free

Copy documents from system drive.

If your device no longer allows you to complete the above points, try to find another one with which you can still do this.

Important drivers for the Eee PC model or any others are on the official website.

But copying documents from the system disk in case of laptop inoperability will not be so easy. If the device allows it, we move it to a safe place. If not, open the laptop, take out the hard drive and try to connect it to other equipment. Pulling out the data you need.

Create bootable portable memory

It should be said right away that you can reinstall the OS in different ways. Previously, it was popular from disk, since there was simply no USB memory. In the early days, many motherboards did not support such devices. But over time, it became possible to carry out the necessary procedure from a flash drive. And even today this option often becomes the only one, since many models simply may not have a suitable drive.

We’ll look at a no-disk option using only compact portable storage:

We find the image of the required OS. Usually Windows 7 is downloaded from different torrent trackers.

Install the UltraISO application. Since the program is paid, in order to use it, we press the “Trial period”. this will be enough for our purposes.

Go to the “File” menu and then “Open”.

Add the previously downloaded system image.

We go to “Bootstrapping”, and then “Burn the image”. A new window will open where we select “USB-HDD”, and then “Format”. We confirm the action.

At the end we are interested in “Record”.

Installation

Well, now let’s move on to directly hosting Windows 8 or any other OS version on the device:

When the system restarts, the display will show a message telling you to press any button to continue. Do it.

A plate will appear where you need to specify your preferred language. As a result, we select “Install”.

The “License Agreement” appears. We confirm reading.

Then we need a “Full Installation”.

Now we decide whether the process will take place with or without the removal of sections. Personally, I recommend allocating about 50 GB to the system disk. If you already have one, just click on the desired drive and then “Format”. We confirm our actions.

How to reinstall Windows on Asus laptop? Step-by-step instruction

Good day, blog visitors.

Any computer, regardless of the “stuffing” and the software used, sooner or later needs a clean installation of the operating system. This is due to various reasons. a new version has appeared, the old one is out of order, there is a desire to remove errors and others. Of course, reinstalling Windows on a laptop on Asus or any other manufacturer will help in all these issues. But today I’m just going to talk about the process associated specifically with the equipment from this computer giant.

BIOS setup

Now we need to set the boot via BIOS and some other elements. To do this, we perform a number of actions:

First you need to get to the above place. We reboot the device and immediately at startup press “Del”, “F2” or another key indicated on the monitor. it all depends on the model. For example, on k53s, the first option is suitable.

Then we go to the “BOOT” tab and select Hard Drive BBS Priorities. We need to put the USB stick first.

After we find “Launch CSM” and indicate “Enabled”.

Open “Security” and remove “Boot Control”.

At the end, press “F10” and confirm the action. This will save everything that we set, and then reboot the system.

Using the fallback area

Also on some models, such as x54h, it is possible to use the recovery area. This is some space on the hard disk, which makes it possible to restore the system without a removable disk.

Important! If, after purchasing a laptop, the operating system has already changed, most likely it will be impossible to do this.

So, in order to use the tools from the backup department, we do a number of actions:

We restart the system and immediately hold down “F9”.

A menu will appear where we need to specify “Windows Setup” and confirm the action.

A corresponding message will appear at the end.

Turn on the device and specify the settings, as usually happens when you first start.

Well, as mentioned above, such a solution will help to cope with many problems. Sometimes even it comes up when the FN button does not work. But again, not on all models.

Hope this article helps you. Subscribe and tell your friends about the blog.

How to install Windows 10 on an Asus laptop with UEFI (using the ZenBook UX310UA model as an example)

Not so long ago, I came across a compact laptop complaining about the impossibility of installing Windows 10 (the error “Installing Windows on this disk is not possible. Perhaps the hardware of this computer”). Well, I had to figure it out

In fact, the problem was (I think) related to the fact that the user incorrectly created the bootable media and tried to install the system from it. Although, I will immediately note that in some cases, incorrect BIOS / UEFI settings may be to blame.

installing, windows, asus, laptop

In this article, I will show a step-by-step example of installing the OS on an ASUS ZenBook UX310UA laptop (I will add that on many ASUS laptops, especially from this line, the steps will be similar).

Installing Windows 10 on an ASUS laptop

Creating a bootable USB drive

To work, you need the Rufus utility and a boot image with Windows 10 OS.

And so, insert the USB flash drive and launch Rufus (Important! All data on the USB flash drive will be deleted, so copy everything you need from it).

Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32), “Standard Windows installation”. Click the “Start” button (the settings are shown in the screenshot below).

Update from 01/24/2019 (since the Rufus program has been slightly updated, and its design has changed. I will give one more screen for version 3.4 so that no one gets confused).

In general, the flash drive is ready, you can move on

Loading the optimal settings in the BIOS. enter the boot menu.

BIOS settings are not always set by default (default). Therefore, first of all, I recommend to go into the BIOS and restore them.

By the way, you can immediately connect the bootable USB flash drive created in the previous step. I recommend connecting to a USB 3.1 port (installation will be faster, especially if your flash drive supports this standard).

To enter the BIOS, immediately after turning on the laptop (the ASUS logo should appear) press the F2 key (preferably several times, to be sure).

READ  Installing the Xiaomi 70mai dash cam pro dash cam

In BIOS (UEFI). first of all go to Advanced Mode (F7 key). see the bottom of the window.

In the Save Exit section, select the Restore Defaults option. Then save the changes. the “Save Changes” button (you can simply press the F10 button. after which all changes will be saved and the laptop will go to reboot. enter the BIOS again with the F2 key).

Restore Defaults. restore the default settings

After restoring the settings, entering the main BIOS (UEFI) window again, press the F8 button (enter the Boot Menu). In it you should see our USB flash drive. select it and press Enter.

installing, windows, asus, laptop

Boot Menu. select bootable media

Next, the laptop must start installing Windows. a “circle” should run in the center of the screen

If the installation does not occur. check if you wrote down the installation USB drive correctly and set the UEFI settings.

Windows 10 setup process

The first window is a greeting with a choice of language (I omitted it, just press Enter). In the next window. click the “Install” button.

Next, a window will appear with the terms of the license. agree and click “next”.

In the window with the choice of installation option, select “Custom: Windows installation only (for advanced users)”.

deleting all partitions on the hard drive

After that, you can create one partition on the entire disk and install it into it (some recommend creating two partitions. one for installing Windows, the other for user data). If you create two partitions, then under Windows I recommend allocating space for at least 100 GB.

In my case, I just created one partition for the entire disk (931.5 GB) and clicked “Next”.

By the way, if at this step you see an error that “Windows cannot be installed on this disk” (see the screen below), then you most likely created the bootable USB flash drive incorrectly (see the first part of this article). It is also possible that you downloaded an “incorrect” ISO image with the system.

Actually, if all is well, the installation of Windows should begin. Here you just need to wait while the files are copied (if you connected a flash drive to USB 3.1, then wait not long, 5-6 minutes).

When the files are copied, the laptop will reboot and the installation will continue. Several windows will appear in front of you: but there is nothing interesting in them, you will need to enter a username, set network settings (you can also skip all the steps and do it after). I lowered all these windows, tk. They are of no practical interest, and I think that everyone will cope with them on their own

Actually, this completes the installation. Then you can start installing the drivers (in my case, it was enough to go to the official website on this page: https://www.asus.com/ru/Laptops/ZenBook-Classic-Series-Products/).

But to be honest, just in case, I also resorted to Drive Booster and for extra. 5 minutes I updated not only the drivers, but also all sorts of libraries: DirectX, Visual C, Net FrameWork, etc. (without going anywhere and without looking for anything

How to install Windows 10 on an Asus laptop with UEFI (using the ZenBook UX310UA model as an example)

Good day.

Not so long ago, I came across a compact laptop complaining about the impossibility of installing Windows 10 (the error “Installing Windows on this disk is impossible. Perhaps the hardware of this computer.”). Well, I had to figure it out.

In fact, the problem was (I think) related to the fact that the user incorrectly created the bootable media and tried to install the system from it. Although, I will immediately note that in some cases, incorrect BIOS / UEFI settings may be to blame.

In this article, I will show a step-by-step example of installing the OS on an ASUS ZenBook UX310UA laptop (I will add that on many ASUS laptops, especially from this line, the steps will be similar).

Installing Windows 10 on an ASUS laptop

Creating a bootable USB drive

To work, you need the Rufus utility and a boot image with Windows 10 OS.

A small but very versatile utility for creating bootable media. Allows you to create flash drives for BIOS and UEFI (for GPT and MBR disks), with different OS (Windows 10 is supported!). In addition, it is completely free and supports Russian.

Windows 10 ISO image

Requirements: you need an image that does not exceed 4 GB in size. Second, discard the different 20-in-1s at once. you need a simple option like “Windows 10 x64 home”. those. in the image one specific system (ie do not use any “Win 10 home / Pro / Ent x32 x64, 5 in 1”). There are a lot of such images on the net. (for example, can be downloaded from the official Microsoft website).

And so, insert the USB flash drive and launch Rufus (Important! All data on the USB flash drive will be deleted, so copy everything you need from it).

Next, specify the ISO image (recommended for installation above), then select the option “GPT for computers with UEFI interface” (file system. FAT 32). “Standard Windows Installation”. Click the “Start” button (the settings are shown in the screenshot below).

Update from 01.24.2019 (since the Rufus program has been slightly updated, and its design has changed.I will give one more screen for version 3.4 so that no one gets confused).

In general, the flash drive is ready, you can move on.

How to create a bootable UEFI GPT flash drive with Windows 10, or why errors occur when installing the system on a new laptop (PC). a guide for beginners.

Loading the optimal settings in the BIOS. enter the boot menu.

BIOS settings are not always set by default (default). Therefore, first of all, I recommend to go into the BIOS and restore them.

By the way, you can immediately connect the bootable USB flash drive created in the previous step. I recommend connecting to a USB 3.1 port (installation will be faster, especially if your flash drive supports this standard).

We connect the flash drive to the USB 3.1 port (installation will be faster!)

To enter BIOS. Immediately after turning on the laptop (the ASUS logo should appear) press the F2 key (preferably several times to be sure.).

In BIOS (UEFI): first of all go to Advanced Mode (F7 key). see the bottom of the window.

In the “Save Exit” section, select the “Restore Defaults” option. Then save your changes. the “Save Changes” button (you can simply press the F10 button. after which all changes will be saved and the laptop will go to reboot. Enter the BIOS again with the F2 key).

Restore Defaults. restore settings to default

After restoring the settings, entering the main BIOS (UEFI) window again, press the F8 button (enter the Boot Menu). In it you should see our USB flash drive. select it and press Enter.

Note: in the boot menu, you (most likely) should display 2 lines with the name of the installation flash drive. You need to select the one opposite which “UEFI OS” appears ().

Boot Menu. select bootable media

Next, the laptop must start installing Windows. a “circle” should run in the center of the screen.

READ  Installing CCTV Cameras In A Private House

If the installation does not occur. check if you wrote down the installation USB drive correctly and set the UEFI settings.

Windows 10 setup process

The first window is a greeting with a choice of language (I omitted it, just press Enter). In the next window. click the “Install” button.

Next, a window with the license terms will appear. agree and click “next”.

In the window with the choice of installation option, select “Custom: Windows installation only (for advanced users)”.

In some cases, reinstalling the OS may be the reason for the refusal of warranty service (although this is quite rare, but still. Most often, the warranty is given for hardware, and you can install any software.).

deleting all partitions on the hard drive

After that, you can create one partition on the entire disk and install it into it (some recommend creating two partitions, one for installing Windows, the other for user data). If create two sections. then under Windows I recommend allocating at least 100 GB of space.

In my case, I just created one partition for the entire disk (931.5 GB) and clicked “Next”.

Boot Menu. choose bootable media, if at this step you see an error that “Windows cannot be installed on this disk.” (see the screen below). then you most likely created the bootable USB flash drive incorrectly (see the first part of this article). It is also possible that you downloaded an “incorrect” ISO image with the system.

Actually, if all is well. Windows installation should begin. Here you just need to wait while the files are copied (if you connected a flash drive to USB 3.1, then wait not long, 5-6 minutes).

When the files are copied, the laptop will reboot and the installation will continue. Several windows will appear in front of you: but there is nothing interesting in them, you will need to enter a username, set network settings (you can also skip all the steps and do it after).

I lowered all these windows, tk. they are of no practical interest, and I think that everyone will cope with them and independently.

Actually, this completes the installation. Then you can start installing the drivers (in my case, it was enough to go to the official website on this page: https://www.asus.com/ru/Laptops/ZenBook-Classic-Series-Products/).

But to be honest, just in case, I also resorted to Drive Booster and for extra. 5 minutes I updated not only the drivers, but also all sorts of libraries: DirectX, Visual C, Net FrameWork, etc. (without going anywhere and not looking for anything).

A short video with the sequence of installing Windows on a device from ASUS.

Installing Windows 10 on a laptop: step by step instructions

Better to start by visiting a special page dedicated to Windows 10, posted on the official Microsoft website. Everything you need to install is collected here.

Experts advise against using third-party utilities of dubious origin. over, this time Microsoft specialists really prepared well, and their utilities are reliable and easy to use.

How To Install Upgrade to Windows 10 on Asus Laptop Free. Updated 2020

Is your laptop ready to install Windows 10?

This will be reported by a special utility that you can find on the support page. The general requirements are as follows.

  • Screen with a resolution of 800 × 600 pixels.
  • About 20 GB of disk space.
  • At least 1 GB for 32-bit or 2 GB for Windows 10 64-bit RAM.
  • Video card that understands DirectX version 9 or higher.
  • or less modern processor with a frequency of 1 GHz or higher.
  • PAE, NX and SSE2 support

Benefits of using Windows 10

Let’s try to answer the most important question: is it worth installing a fresh version of the operating system from Microsoft? You will not find any stunning or revolutionary innovations in comparison with 8.1. However, in every component the operating system has improved both in speed and controllability. Here are just five points that any laptop user might be interested in.

  • The most important news for all those who have taken hostility to the “tiles” of the eighth version. the return of the familiar desktop “Start” menu. It has become much smarter and more convenient to use. To run any program, you just need to type the first couple of letters of its name. Live tiles are still there, they have moved to the Start menu bar.
  • Significantly improved Mail and Calendar application will finally allow you to fully work with mail in standard Windows applications.
  • The new Edge browser is much faster and smarter than its slow predecessor IE.
  • The setup menu became clear to the user. A short list of the main points, with large, easy-to-understand pictograms. But the main achievement is a convenient search for settings. Just write what you need and get an approximate list of settings that will help you.
  • Thought over and improved file synchronization with OneDrive cloud storage and smartphones under all popular mobile OS.

And this is not a complete list of all the updates and innovations. So let’s get started with the installation. A step-by-step guide will help you understand all the main points of this process and do everything yourself.

How long does it take to install Windows 10?

It all depends on the speed of your Internet connection and the storage system. The process takes place fastest on an SSD drive, and takes a maximum of 30 minutes. On older laptops with a conventional 5400 rpm HDD, you need to prepare for an hour of device unavailability during an update, or even more.

How to install Windows 10 from a flash drive or DVD?

To install Windows 10 from a USB flash drive or disk, you need a system image, which can be downloaded from the above support page of the official website. There you will also find a utility for writing an image to a flash drive. Click on the Download tool now button, after selecting the version: 32 or 64 bit.

The program is called Media Creation Tool.

  • In Media Creation Tools, select the desired action: install Windows 10 on your laptop right now or create a bootable USB flash drive.
  • In the next window, decide on the OS edition, language and bit depth. The choice of bit depth is related to the capabilities of the processor. But even if the central chip is capable of supporting 64-bit computing, but the memory is less than 4 GB, then you can opt for the 32-bit version. There won’t be much sense in switching to 64-bit.
  • Specify the type of media for recording the image: a flash drive of at least 4 GB or a DVD disc. Most portable laptops do not have a DVD drive, so there are few alternatives.
  • After capturing the image, restart your laptop. If the boot from the flash drive does not start, then configure the order of devices to boot in the laptop BIOS. How to enter BIOS, read our article.

How to install Windows 10?

Windows 10 left the Technical Preview in August. Now not only enthusiasts and technicians can use it. The new operating system is better and more convenient than all previous versions of “windows”. Anyway, at the moment. However, many users are wondering “is it worth installing Windows 10 on your laptop?” The alternative for them is to stay on the previous stable version. In this article, we will reveal the benefits of using the new product from Microsoft, as well as explain in detail and step by step how to install Windows 10 on a laptop.

READ  Setting Up A Web-Camera On A Laptop

Important notes about installing and using Windows 10 on a laptop

In this new version of Microsoft’s operating system, keep in mind the following features.

    • In Windows 10, even more clearly than in the G8, the concept of applications and user data is separated. Never place your documents and photos on the system drive. If you ever need to do a full system reset, they can be removed. But the system also recovers completely, even if system files and applications are damaged.
    • An Internet connection is required throughout the installation of Windows 10 on a laptop to download important update files and device drivers.
    • When installing “tens” on an old laptop, released more than five years ago, make sure there are drivers for this version of the OS for all devices in the laptop. For example, while support for some sound cards is limited.
    • The installation disc or flash drive can be left in case of system recovery after a serious failure. But this happens very rarely. Therefore, most users do not save the recovery disc. You can always make a new one.
    • It is not recommended to use pirated distributions for installation. Your laptop’s operating system needs constant updating, which is not guaranteed by the pirated installation kit.
    • After installing Windows 10 on a laptop, it will not be superfluous to install an antivirus. Many free programs: AVG, Avast, for example, have already released their versions under the top ten.

    Should you install Windows 10 on your laptop? The answer is yes. The laptop will run faster, and you will get new applications and an easier-to-manage OS. Honestly, there isn’t much to customize. This is the first version of the OS that works great out of the box.

    How to install Windows 10 or Windows 7 on an asus vivobook

    Despite all the “attractions” of the asus vivobook, and there are quite a few of them, the owners have difficulties with installing Windows 10 / Windows 7, especially if they are trying to install from a flash drive.

    DVD drive is easier, but since it is not in asus vivobook 17, asus vivobook max, asus vivobook flip, asus vivobook 15, x540sa, d540n, x540ya, x712fa, a512f, x540na, x540ma dm298, 15 a512d, m712d, you have to buy a drive USB.

    Although it is not expensive, then who wants to toil with this now, if it is easier from a flash drive and it is now at hand for almost everyone.

    There is also a problem for those who install Windows 7, since drivers are usually provided only for the tenth version.

    Although not all the way here either. I recently bought a vivobook with a ten, and Wi-Fi worked extremely poorly.

    I wanted to download from the official resource, but alas, they weren’t there, I couldn’t even find my model, but let’s get back to the installation.

    How to install Windows 10 Windows 7 from a USB stick on an asus vivobook

    If nothing is done then your asus vivobook will not see the stick, so you must follow my steps to continue.

    In short, you need to create a UEFI flash drive with the Rufus program, then some may see the flash drive right away.

    If such an opportunity does not appear, then you need to go to the BIOS menu (as you ruled immediately after switching on, press “Esc”).

    Go to security secure boot disable save and exit. Then go to BIOS boot CSM menu to enable savd and exit. Step by step it is something like this.

    Insert the USB stick. Turn on the vivobook and immediately press ESC 5-10 times to open the boot menu. Then find the “Enter Setup” option, select it and press Enter.

    Once logged in, go to “Advanced” by pressing the right arrow key. There select “USB Configuration” and go to “XHCI Preboot Mode” and disable it.

    Now go to “Security” and disable “Secure Boot Control”.

    The next step is to enable “Launch CSM” on the download tab, but you will be denied the “Enable” option.

    To be able to enable Launch CSM, press “F10” and select “Yes” to save the configuration and exit.

    Now quickly press ESC 5-10 times and you will get into BIOS again. Now go to the Boot tab and you will see the Launch CSM option is available, just enable it and press the F10 button again to save.

    Then quickly press the ESC key 5-10 times to open the boot menu.

    Congratulations! Now you have the option of successfully unlocked boot and you can safely install Windows 10 or Windows 7 from a USB flash drive without straining your asus vivobook.

    just keep in mind that at the time of reading this entry, ASUS may make changes and this option will not work. Then write in the comments. Success.

    Prepare Windows installation media

    You can install Windows from both DVD media and USB stick. The latter option is more popular since most modern laptops do not have a DVD drive.

    Buy or burn your own operating system DVD. Download the ISO image of the system from the Microsoft website.

    Users, as a rule, create bootable USB-sticks on their own or ask from friends. Use UltraISO Premium to create an ISO ISO image for Windows.

    One year warranty for a new part

    If we replaced the cooler, and it broke down after 10 months. we will replace it with a new one for free.

    Preparing a Windows installation

    At the very first stage, you need to prepare the laptop for installation in advance. As a rule, the boot starts from the hard disk on which the OS is installed, but sometimes in the BIOS, previous installers may leave the verification of the installation media in the DVD drive. That is why you need to go into BIOS and install boot from DVD or USB-media, depending on where you will install the system from.

    Popular services

    In order to install Windows yourself, you will need to carry out a number of preparatory work, thanks to which the installation will go perfectly.