Reflash device

Installing a new version of the system by flashing the device requires special skills and knowledge, so it is better to entrust this method to a specialist. Before performing the procedure, it is recommended to create a BackUp, which will allow you to recover data in case of problems during operation. Then you need to find the required version of the system. the file of the “.ipsw” format (they can be found on special forums and sites on the network). To avoid an error in the operation of iTunes, you need to disable the “Find iPhone” function in the device settings.

Once the preparation is complete, you can start running the installation. To do this, you need to connect the switched off device to the computer, while holding down the “Home” button. As a result of this action, the recovery process will start, and a message will appear in the window that opens that “You need to restore the iPhone before using it in iTunes”.

After confirmation by clicking the “OK” button, an iTunes window will open on your computer. Holding down the “Shift” button, select the downloaded file with the system firmware in the explorer and start the download and installation process. During the update, the device will reboot several times. it is necessary to leave the iPhone connected to the computer until the end of the installation.

How to recover after unsuccessful completion of the procedure

If the iTunes logo and charging cable are displayed on the screen after the update, then an error occurred during installation. It is possible to fix it by restoring the system. for this you need to connect the device to the PC and select “Restore” in iTunes.

What to do if there is not enough memory

If the device does not have enough memory to install updates, it is recommended to transfer some of your personal files to iCloud or another cloud storage.

Using iCloud

To create a backup copy of your phone via iCloud, you need to go to the phone settings, select the “iCloud” menu item and click on “Create backup”. Backing up takes a long time and requires a lot of data transfer. Because of this, before starting the process, it is recommended to connect the device to the WI-FI network, make sure there is free space in the cloud and ensure that the battery is sufficiently charged.

Through DFU mode

The most time consuming way to update iPhone is to install the system via DFU mode. DFU (or Device Firmware Update) is a specialized emergency mode for fixing problems with the operating system of a device. It is used for devices with jailbreak (jailbreaking the device to be able to bypass Apple’s prohibitions on installing third-party software).

To update iPhone via DFU, you need to connect your phone to your computer using a USB cable, and then hold down the power and home button for 15 seconds. After this time, release the power button and wait until iTunes recognizes the device in DFU mode. As a result of these actions, the iTunes window will open, in which it will remain to perform actions similar to the classic flashing.

How to update Safari and other regular programs

After installing a new version of the system, there may be problems with updating the standard iPhone programs, for example, Safari. To solve it, go to the phone settings on the update tab and click “Update” opposite the desired application or “Update all”. After that, you will need to enter the password for the account to start the installation.

How to update iOs with jailbreak

On a jailbroken device, when updating, the window for checking for a new version of the system freezes, and there is no way to solve this problem. To install the new version of iOS on a jailbroken iPhone, you must either rollback the jailbreak or use the DFU mode. If you try to install an update without rolling back the jailbreak, there is a possibility that the installation will be blocked and the phone will stop functioning.

Which iPhone, iPad, and iPod touch models support the update

As a reminder, the iPad is now being updated separately from the iPhone and iPod touch. The system that is installed on tablets is called iPadOS and will be released on September 30.

IOS 13. Released. How to update iPhone and iPod touch. “over the air” and via PC

upgrade, iphone

Apple has released the final version of iOS 13 for supported iPhone and iPod touch models. The update is now available for download and can be installed over the air or through iTunes / Finder.

How to update to iOS 13

First, free up some space. Upgrading to iOS 13 weighs up to 3.1 gigabytes depending on the device, which means that your device must have at least 3.5 gigabytes of free space.

Second, create a backup. Before installing the update, organize a full backup of the system, applications and your personal data. This can be done using iCloud in device settings or using iTunes / Finder on your computer. When creating a backup from a PC, Safari bookmarks, mail accounts, notes, call history and calendar events will be additionally saved.

READ  How to send full video to iPhone

Updating to iOS 13 through settings

Step 1. Go to “Settings” → “General” → “Software update”;
Step 2. Wait for the update to appear and click “Download”;
Step 3. To start the update, click “Install”. You can also tap Later and choose Remind Me Later or Install Tonight. If you chose the latter option, just put the device on charge before going to bed. it will update automatically.

Updating to iOS 13 via computer

iphone 5 update ios 11 2021 || iphone 5 update new trick 2021 || Install iOS11 iPhone5 || ComTech

Step 1. Make sure you have the latest version of iTunes installed on your computer. In the case of macOS Catalina, you’ll have to use the Finder;

Step 2. Connect your device to your computer, open iTunes / Finder and select your device in the left menu;
Step 3. Download the iOS 13 image for your device from this site (when it appears there);
Step 4. Press the “Update” button while holding down the Option (Shift) key and select the iOS 13 firmware downloaded earlier;
Step 5. Confirm the installation and wait until the end of the procedure;
Step 6. Settings gadget from scratch or restore the created earlier backup. only suitable with iOS 12.4.1 or earlier.

How to downgrade from iOS 13.1 beta to the released iOS 13

Step 1: Download the firmware file: select the desired section (iPhone, iPad or iPod touch), click on the model of your device and download iOS 13 (or 12.4.1);
Step 2: Connect your iPhone or iPod touch to your computer using the supplied USB cable and open iTunes / Finder;
Step 3: Now you need to put the device into DFU mode. If you own an iPhone 7 and 7 Plus or iPhone 8 and 8 Plus, then read this guide, and if you have an iPhone X and newer, follow this guide. For older iPhones, follow these steps:

  • Connect your device to your computer;
  • Turn off the device;
  • Now press and hold the “Power” button for 3 seconds;
  • Then hold down the “Home” button without releasing the “Power” button for 10 seconds;
  • Release the Power button but continue to hold the Home button until iTunes notifies you that the device is in recovery mode;
  • In the appeared click on the “Ok” button.

Step 4: Press and hold the Alt / Option key on a Mac computer or the Shift key on a Windows computer, and then select “Restore iPhone” (iPod touch);
Step 5: In the window that appears, specify the path to the previously downloaded iOS 13 firmware file. IPSW;
Step 6: Select “Repair and Update” and follow the instructions on the screen;
Step 7: iTunes will check the firmware file and install it on the device. The process will take about 10 minutes;
Step 8: After the rollback process is complete, the device will display “Hello”. After completing the system configuration process, you can restore data on the device from a backup or configure the system from scratch.

IOS 11 on iPhone 5S: Is It Worth Installing Iyos 11 | how does it work on iphone

Hello! iphone 5s is one of the most popular Apple iPhones in Russia. In this video I will show how this iPhone.

Also, check your iPhone 5S for free storage space before installing the update. To do this, go to the “Settings” menu and open the “Device memory” section. Also, first ask how many gigabytes of memory this new iOS version is.

If everything is ok and ready to download software over Wi-Fi, then we will run a system update on the iPhone. To do this, open the “Settings” option on your smartphone, select the “General” section, and then the “Software update” subsection. After iPhone finds the update you want for iOS 10 and offers it to you, execute the Download and Install command, and then accept the Agreement by clicking the Accept button. The update will start downloading to your iPhone.

Apple Product Portal

How to update iOS firmware on iPhone 5 yourself?

If you are lucky enough to own an iPhone 5S, you probably want to update your operating system to the latest version to have the same features as iPhone 6S and above. The latest version of iOS 10 has high-tech capabilities, so in this article, we’ll show you how to update your iPhone 5S.

The tenth version of the system has proven its advantages in practice, now is the time for you to find out how iOS 10 works on iPhone 5S, if there is any incompatibility or slowdown, and answer the main question:

iPhone 5S may still get iOS 12 update

Apple often prides itself on how quickly and consistently it updates its iPhones to the latest iOS versions. Given that the company only has a handful of models and full control over the hardware and software side, this is not an impossible task. But even Apple has limitations: all iPhones have expiration dates. For the iPhone 5S, it seems to have arrived last year with the release of the iOS 11 update. However, there is now a small chance that the popular smartphone could get the latest iOS 12 firmware this year.

READ  How to reset iPhone if you forgot the passcode

However, it should be understood that the chance is small. The conclusion is based on an analysis of the source code of WebKit, the open source web engine that powers Apple’s Safari browser. Comments in one of the sections suggest iOS 12 is running on the iPhone 5S, at least in testing. But whether Apple’s plans extend right up to the full release of the corresponding version of iOS 12 is not clear.

If that happens, the iPhone 5S could be an impressive example of longevity. The iPhone 5S, launched in 2013, is somewhat of an iconic device. It was the last Apple smartphone to use the old blocky design and small display (aside from the iPhone SE, of course). It was also the first iPhone with a 64-bit processor, which gives hope that iOS 12 might actually come out for this device.

The likelihood of such a scenario raises the question of why Apple might take such an unexpected step? This may be due to the fact that iOS 12 is essentially a “half” launch, with more focus on bug fixes and performance improvements for iOS 11, which many users have been complaining about. Considering the outdated hardware, such optimizations are certainly not superfluous for the iPhone 5S. However, it is worth remembering that while we are talking only about the assumption.

If you notice an error, select it with the mouse and press CTRLENTER.

How to update iOS firmware on iPhone 5 yourself?

If you are lucky enough to own an iPhone 5S, you would certainly like to update the operating system to the latest version in order to have the same features as those of iPhone 6S and above. The latest version of iOS 10 has high-tech capabilities, so in this article we will tell you how to update your iPhone 5S.

The tenth version of the system has proven its advantages in practice, now it’s your turn to find out how iOS 10 works on the iPhone 5S, if there is any incompatibility or slowdown in work, and to answer the main question:

Before the procedure

If you are the owner of a 16 gigabyte version of “six”, make sure you have enough free memory in advance. Keep in mind that even if there is enough space to download the archived folder with updates, then when you unpack it and install it on the device, it will take a little more. Therefore, try to always leave a small margin beyond the specified size of the update package. If this is not done, an error may occur at any time. The download may be interrupted, the iPhone may freeze or get stuck in the recovery loop, and at best you will need to do everything again, at worst. force the gadget to be restored, with complete data loss.

Therefore, remember the three main things to do before updating iOS: make sure you have enough free space, update to the latest version of iTunes, and be sure to back up to your computer or iCloud.

This will minimize the risk of a failed update. And in the event of a system failure. you can recover all your data with virtually no loss.

To be sure to exclude the possibility of errors, it does not hurt to pre-update the operating system of your computer, built-in security programs, as well as the installed antivirus. After that, restart your PC to apply all updates, and you can proceed to download the new firmware to the iPhone.

Update

There are two main ways to download and install updates. The first. from the iPhone itself, subject to a stable connection to the network via Wi-Fi, the second. using an authorized computer, in the proprietary program menu. iTunes.

The main differences between them are speed and convenience.

The first option is convenient because nothing is required except a smartphone and the Internet. The device will carry out the entire procedure itself (if you choose this method. be sure to put the iPhone on charge. it is not known how long it will take to download and install). IOS takes longer to load because, physically, a router that distributes Wi-Fi makes the data transfer speed slow.

The second one is much faster, but you can’t do without a PC and a cable connection.

In order to make an update from the device itself. go from the settings menu to. Basic, and in them select the item. Software update. After searching the network for the latest iOS updates, a proposal will be displayed to download and install them. to do this, click on the corresponding message below. Then confirm your agreement to the proposed terms of use. After that, you don’t need to do anything else, the iPhone will do everything by itself. Just wait for the process to finish. It is best to carry out this procedure in the evening, then the Internet speed is higher and there are fewer people who want to download updates. And by the morning the smartphone will be ready for work.

READ  How to enable tethering on iPhone

As soon as a fresh update appears, iTunes will notify you about it when connecting. If you initiate this process yourself, connect the phone to the PC with a cable (preferably an original one), launch iTunes. Find your iPhone among devices in its menu. In the sync settings and parameters tab. initiate the update.

Everything, further processes will proceed automatically. The main thing is that the connection to the network is stable. After downloading the iOS update package, the installation will start, during which the iPhone may reboot repeatedly. this is normal.

But it happens that on your part all the conditions are met, but the iOS update fails. The error is stubbornly displayed, and there is no way to use the device.

Reasons for not updating

There are three main reasons why updates are not received:

  • The device does not support iOS 11.
  • You were a beta test participant.
  • Jailbreak done

The first step is to check the list of supported devices. It contains all the latest models of smartphones and tablets from Apple. Please note: you can install the latest system update on iPhone 5s, but iPhone 5 and 5c are not in the list. version 11 will not come to these devices.

The next reason is participation in beta testing. If the user has updated the system to the Golden Master version for developers, then nothing else should come to him. GM and the final version of iOS 11 are one and the same, that is, in fact, you already have an up-to-date system.

With the third reason, everything is also clear: if you have jailbroken the previous version of iOS, then you will not be able to update to the next one. Therefore, here you should not ask yourself why the update does not come, but perform recovery in DFU mode, after which you can install a new system.

Force system update to iOS 11

The new version of iOS, numbered 11, became available for installation on September 19. If you still haven’t received the iOS 11 update, there is reason to think about the reasons. enough time has passed for you to get your turn.

Upgrade to iOS 11

In theory, the system itself should offer to update to the latest version, so you just have to agree with the installation of iOS 11. If the firmware update to iOS 11 has not been received on your phone or tablet, then update it manually:

  • Connect the charger. If the device turns off during the update, you will have to restore.
  • Back up your data.
  • Connect to the Internet via Wi-Fi.
  • Open the settings, go to the “General” section. Select “Software Update”.
  • Click Download and Install.
  • If you are prompted to uninstall programs to free up space, select Continue. After the update, iOS will automatically install the uninstalled programs. You can also pause the operation and clear the memory manually.
  • Click “Install” to start the installation process. If you don’t want to install iOS 11 right now, tap Later and choose between Remind Me Later or Install Tonight. When choosing the second option, it is enough to connect the charger in the evening. the update will start automatically.

If you are not satisfied that there is still a registered developer version on your device, delete the profile or update via iTunes. To delete a developer profile:

  • Open the “General” section in the settings and go to the “Profiles” submenu.
  • Select the iOS Beta Software Profile and click Remove.
  • Reboot your device.
  • Go to the “Software update” section, download and install the latest update.

The functionality of the system will not change, but the system information will indicate that the phone / tablet is running iOS 11.

Installing iOS via iTunes

Installing new versions over the air can cause various problems, so the safest way to update is to use iTunes. The method below also helps to get rid of the Golden Master version and go to the final build of iOS 11 without deleting the developer profile.

  • Download the iOS 11 IPSW file for your device.
  • Connect your device to your computer and launch iTunes.
  • Select device.
  • Make a backup before performing the update.
  • Hold down the Shift key and click “Update”.
  • Select the downloaded firmware file.
  • Confirm the start of the installation by clicking “Update”.

Do not disconnect the device from the computer while flashing. After a short wait, the final version of iOS 11 will be installed on it.