Table of Contents

Through DFU mode

The most time consuming way to update iPhone is to install the system via DFU mode. DFU (or Device Firmware Update) is a specialized emergency mode for fixing problems with the operating system of a device. It is used for devices with jailbreak (jailbreaking the device to be able to bypass Apple’s prohibitions on installing third-party software).

To update iPhone via DFU, you need to connect your phone to your computer using a USB cable, and then hold down the power and home button for 15 seconds. After this time, release the power button and wait until iTunes recognizes the device in DFU mode. As a result of these actions, the iTunes window will open, in which it will remain to perform actions similar to the classic flashing.

How to downgrade to a previous version of iOS

If it becomes necessary to return to the old version of the system, this can be done in two ways. either restore the previously saved version, or install the downloaded distribution kit of this version via DFU mode or by flashing the device. In the first case, to restore, you need to use a computer with iTunes installed.

What to do if the system does not see the update

If the iPhone does not see the update, then the following steps should be followed:

  • check the phone’s support for the new version of the system. information about this is posted on the official Apple website;
  • reset settings to factory settings;
  • change the network or reconnect to WI-FI again;
  • reboot device.

The device gets very hot during the process, this is normal?

Installing a system update is an energy-consuming procedure for iPhone, so the device may become warm during the process. There is no need to worry about this, because after the end of the work the phone will return to the usual mode. To reduce the load on the cooling system, it is recommended to leave the device in a place open for cool air circulation during the update.

Activation requires an update what to do

To activate the device, the system may require an update. in this case, you need to install a new official version of the system in a convenient way (for example, via iTunes).

How to remove a downloaded package

To remove the previously downloaded version of the system update, you need to go to the device settings and select the “iPhone storage” item. In the list that opens, find the required package and remove it.

Why update iOS on iPhone?

We are unlikely to open America to you if we say that updates should be regular, regardless of the type of OS and phone model. Updates are additions to the firmware that fix all sorts of bugs and add new features. They also increase security, applications start to work more stable and faster.

Of course, there are situations when after an update the device’s performance deteriorates. But this is already a defect of specialists. As a rule, it is quickly corrected as soon as possible.

Update for iOS 10 and earlier

On the tenth and earlier versions of iOS, you can update applications and the system using a clever feature. This is how it works:

  • Disable wireless module, activate mobile internet.
  • Go to the App Store and try downloading an app larger than 150 MB.
  • An error message should appear. Like, the size of the content is too large, try to connect via Wi-Fi.
  • We connect to an available point, activate the “Airplane” mode and reboot.
  • When the iPhone turns on, turn off airplane mode. The download will go on its own, but through mobile traffic.

Note that users who know how to update iOS and applications without wi-fi have used this method up to version 10.3.3. Until Apple closed the hole in the operating system by prohibiting the free download and updating of applications.

Change of date

  • Open the App Store and select software to update / download that is larger than the 150 MB limit. You will see a warning that the download is not possible.
  • Go to system settings and select “Date and time”. Disable the “Auto-sync” option, delete the current date value and replace it with a new one a couple of days in advance. For example, if today is October 1, we put the fifth or tenth October.
  • We exit the system parameters and try to boot again. It should turn out!

Remember to reset the settings (date and time) to their original state when the download process is complete.

How to update iOS without wi-fi?

update, iphone, wi-fi

Is it possible to update the iOS operating system at all without connecting to wi-fi? It turns out, yes. We have prepared detailed instructions for those who regularly monitor the release of fresh updates, but do not have the opportunity to connect to high-speed Internet.

How to update iOS on iPhone without wi-fi

Downloading an update via a Macbook or laptop

The procedure requires a personal computer and iTunes utility. The process through Windows follows the standard scheme:

  • On the device, turn on the modem mode and connect the laptop to the tablet with a data cable. As a last resort, connect two devices via a wireless network.
  • Launch iTunes and select the iPhone shortcut on the screen. From it go to “Review” and “Update”.
  • If the traffic is unlimited, then the firmware will be successfully reinstalled.

If a MacBook is available, the algorithm changes slightly:

  • Connect devices via cable.
  • On the smartphone, activate the modem mode and select “USB only”.
  • After that, on the laptop, start the “System Settings” subsection and select “Shared Access”.
  • In the main menu, click on “Shared Internet”, move to the “Connection” block, and in the “iPhone USB” subsection, select “Wi-Fi”.
  • In the window that appears on the display, press the “Enable Wi-Fi” button.

Note! The procedure helps to activate the distribution of traffic from the PC. You can connect to it through the list of wireless networks. This approach helps to update the smartphone, bypass various restrictions (uploading files weighing more than 150 MB).

Sharing the Internet from another device

The company’s strict policy towards downloads did not affect the connection of smartphones to unlimited cellular traffic. This approach allows you to solve the problem of changing outdated utilities in any environment. To carry out the procedure, you need to find the owner of the gadget running an “apple” OS and with 3G, LTE, 4G (unlimited).

The process follows the standard algorithm:

  • On the second device, turn on the modem mode. It will allow you to distribute traffic over the wireless network.
  • Connect Wi-Fi on their own smartphone and connect to an access point.
  • Go to the main menu, from it to the “Software Updates” section and press the “Download” button. The upload button changes color from gray. The transition allows you to upgrade.

Important! In this way, you can distribute mobile Internet to any device. Before you start downloading a file, you need to make sure that the tariff plan allows the operation. The dispensing device will spend more of it and will require a corresponding payment for use.

READ  How to remember your iPhone phone passcode

How to update iPhone without Wi-Fi over a cellular network

The Apple Company is based on the cost of the Internet in its own country. In this regard, the developers initially introduced a restriction on downloading information through a mobile operator, preference is given to a wireless network. For a long time, Russian owners of prestigious gadgets have been looking for an answer to the question of how to update an iPhone without Wi-Fi over a cellular network. Removing restrictions in the settings of the iOS operating system was impossible until the release of version 13.

How to update a game on iPhone without Wi-Fi

It is possible to update large games and programs on version 11 of the operating system. To complete the procedure, the following steps are taken:

Important! Waiting for the download to complete, the icon cannot be pressed again. If the user does this, he will have to reboot the smartphone again, which will refuse to update.

Updating applications via mobile internet

The method refers to simple techniques that allow you to overcome the 150 MB barrier, due to which it is not possible to update the game or the operating system. You need to download the utility and change the time settings on your smartphone:

  • The program is downloaded until the error message appears on the display.
  • The user must go to the date settings: from the main menu to the “General” section, then move to the “Time and date” block. Replacement is made for any numbers from future days. If today’s date is January 1, then the gadget is set to January 2 or any date until the end of the year.
  • After returning to the main screen, you need to open the utilities that were denied to start. If you follow these recommendations correctly, problems with downloading large files will no longer arise.

Important! While the problematic programs are being downloaded, you cannot change the time to the actual one. Otherwise, an error message will appear on the screen again. In this case, the whole process will have to be repeated, and mobile traffic will be wasted in vain.

How to bypass the app megabyte limit (100 or 150 MB)

To solve the problem with system failure, download programs weighing more than 100 MB, you can use one of the above methods. How can I update my iPhone without Wi-Fi:

  • change of the current date and time. After its completion, you can return all the parameters back;
  • inclusion of airplane mode. The download will start no earlier than 1 minute later. after the end of the manipulation. During this entire period, no button presses are allowed;
  • through device reboot. During the download, you cannot click on the utility shortcut a second time, so as not to provoke a process failure.

Important! Either option easily solves the problem of restrictions imposed by Apple. Exact adherence to the step-by-step algorithm will make it possible not only to update games or programs, but also to make changes in the operating system of the device versions 5, 6, 7 S or SE.

Updating applications via mobile network

Updating iOS without using Wi-Fi is also done in several ways. The user can choose the most convenient for himself.

For iOS 11 and 12

There are two actual methods working now. The first is to translate the date into the “near future”. The second is to reboot the phone. There is no point in using various programs.

How to work around the limitation

The method for the iOS 13 operating system will be relevant and less laborious. In devices working up to the thirteenth version, you will need to contrive through crutches. So, how to update or download big games or apps on iPhone if there is no Wi-Fi hotspot connection?

date change

The solution to the problem by changing the date is described in the following

How to download from the App Store without Wi-Fi and restrictions? IOS 11-12 has a date change loophole that allows you to bypass the Wi-Fi-only download restriction and download heavy games and apps. To bypass the blocking:

  • In the App Store, find the application you need to download and click “Download”.
  • Wait for the download ID to appear, which will be blank. There will also be a notification that the object has exceeded its size. Ignore it and go to the main screen by minimizing the App Store.
  • Then select “Settings”. “General”. “Date and time”.
  • Move the “Automatic” switch to the “Not active” position. Then click on the date (you do not need to press for the time).
  • Move the date any number forward (day, 3 days, week forward).
  • To save your settings, just go to the main screen.
  • Next, click on the icon of the game or application that is waiting to be loaded on the main screen of the smartphone.
  • Downloading via mobile data will start.

To keep everything going well, do not change the date until the download is complete. It is important!

After a successful operation, the correct date can be returned. It is noteworthy that the method works not only with all iPhones, but also with iPad and iPad Air.

Method for iOS 10 and earlier

On the tenth version of the iOS system, the owners of Apple mobile devices knew how to update the application without WI-FI using mobile Internet.

  • Disable the wireless module on the device. Activate mobile communication.
  • Go to the AppStore, select an application that exceeds the size limit, and try to download the data.
  • An error message will appear on the screen. It says that the size of the content exceeds the allowed size: “To download, connect to the WI-FI iPhone.”.
  • We connect the phone to an available Wi-Fi point, activate the “Airplane” mode, and then restart the device.
  • After loading the iPhone, disable airplane mode, and the program will continue to load on its own.

Owners of “apple” devices bypassed locks until the release of iOS 10.3.3. The developers have closed this method, preventing users from freely downloading or updating applications.

For iOS 13

Upgrade your gadgets to version 13 of the “apple” operating system. it will be available for iPhone 6s / 6s Plus, iPhone SE, iPhone 7/7 Plus and earlier models. Further:

  • Go to Settings. iTunes & App Stores. App Downloads.
  • Move the checkbox from the option “Ask when downloading applications that are more than 200 MB” to “Always allow”.
  • Done. When downloading a large file, a warning window will appear, but by clicking “Download” you can continue downloading.

How to update the application without wi-fi

Apple is known for quality solutions and service. The vendor takes care of the customers and builds in additional security measures. One of these is the restriction on uploading large files. The article will tell you about how to update the application on an iPhone without WI-FI more than 150 MB.

reboot device

This solution works exactly in the 11 version of the operating system and does not require a date change. But you will have to restart your smartphone at a certain stage. To download large games and applications on iPhone without Wi-Fi, you need:

  • In the App Store, start downloading the app you want and wait for an empty download ID (and restriction notice) to appear.
  • Next, press the power button and restart the device by pulling the shutdown slider to the side of the smartphone.
  • After rebooting, go to the main screen and click on the application icon if the download did not start automatically.
  • Wait for the download to finish without clicking on the icon again. If you do this, you will have to restart the gadget again.

For iOS below version 10.3.3

Prior to iOS 10.3.3, it was possible to bypass protection using airplane mode. To load a game on an iPhone without Wi-Fi, do this:

  • After the restriction window appears, click “OK”.
  • Turn on “Airplane mode” in the settings.
  • Reboot your phone.
  • Turn off “Airplane mode”.
  • Wait for the download to start (it may take more than a minute).

For iOS 11 and 12

There are two actual methods working now. The first is to translate the date into the “near future”. The second is to reboot the phone. There is no point in using various programs.

How to work around the limitation

The method for the iOS 13 operating system will be relevant and less laborious. In devices working up to the thirteenth version, you will need to contrive through crutches. So, how to update or download big games or apps on iPhone if there is no Wi-Fi hotspot connection?

reboot device

This solution works exactly in the 11 version of the operating system and does not require a date change. But you will have to restart your smartphone at a certain stage. To download large games and applications on iPhone without Wi-Fi, you need:

  • In the App Store, start downloading the app you want and wait for an empty download ID (and restriction notification) to appear.
  • Next, press the power button and restart the device by pulling the shutdown slider to the side of the smartphone.
  • After rebooting, go to the main screen and click on the application icon if the download did not start automatically.
  • Wait for the download to finish without clicking on the icon again. If you do this, you will have to restart the gadget again.
READ  Reset iPhone 4 to Factory Settings with Buttons

For iOS 13

Upgrade your gadgets to version 13 of the Apple operating system. it will be available for iPhone 6s / 6s Plus, iPhone SE, iPhone 7/7 Plus and earlier models. Further:

  • Go to Settings. iTunes & App Stores. App Downloads.
  • Move the checkbox from the option “Ask when downloading applications that are more than 200 MB” to “Always allow”.
  • Done. When downloading a large file, a warning window will appear, but by clicking “Download” you can continue downloading.

How to download big games and apps on iPhone without Wi-Fi?

The Internet is quite expensive in the USA. For example, Virgin Mobile USA’s monthly subscription is 35 for 5 GB. Apple is aware of this and, in order to protect state residents from accidentally wasting many GB of a mobile operator, they came up with a download limit if the iPhone is not connected to Wi-Fi. There was no clause on the removal of the restriction in the iOS settings until the release of version 13. Why? For many, this remains a mystery.

date change

The solution to the problem by changing the date is described in the following

How to update iPhone without wifi.

How to download from the App Store without Wi-Fi and restrictions? IOS 11-12 has a date change loophole that allows you to bypass the Wi-Fi-only download restriction and download heavy games and apps. To bypass the blocking:

  • In the App Store, find the application you need to download and click “Download”.
  • Wait for the download ID to appear, which will be blank. There will also be a notification that the object has exceeded its size. Ignore it and go to the main screen by minimizing the App Store.
  • Then select “Settings”. “General”. “Date and time”.
  • Move the “Automatic” switch to the “Not active” position. Then click on the date (you do not need to press for the time).
  • Move the date any number forward (day, 3 days, week forward).
  • To save your settings, just go to the main screen.
  • Next, click on the icon of the game or application that is waiting to be loaded on the main screen of the smartphone.
  • Downloading via mobile data will start.

To keep everything going well, do not change the date until the download is complete. It is important!

After a successful operation, the correct date can be returned. It is noteworthy that the method works not only with all iPhones, but also with iPad and iPad Air.

Features of the

In Russia, mobile Internet is the cheapest in the world, so the owners of the “apple” have to contrive to bypass the limitation of the operating system. Regarding the size of the restrictions, we have the following:

  • Before iOS 10, things were really bad.
  • In iOS 10, the limit was 100 MB.
  • IOS 11 raised the bar to 150 MB.
  • IOS 12 raised the upload limit to 200 MB.
  • In iOS 13 (available since September 2019), the 200 MB limit was left, but they made it possible to remove it in the settings.

Based on the version of the operating system, you can answer the question. how to update the game on an iPhone without Wi-Fi.

How to update iOS without WI-FI on iPad and iPod touch

Since the iPad and iPod touch are equipped with similar hardware to the iPhone, downloading and installing updates on these devices occurs in the same order. This means that the above methods are also relevant for iPad and Ipod touch. The exceptions are those models that are not equipped with a SIM module, which means that there is no mobile Internet in them.

Note! Such gadgets (early iPads and iPods) are recommended to be updated using a PC or an auxiliary iPhone that works in tethering mode.

It is worth noting that if the device has a system not older than iOS 11, the problem of size restrictions is not relevant. The developer has removed the restriction, now the user can update directly from the device. If the system is older than version 11, and the WI-FI network is not available, you will have to resort to one of the above methods to bypass the 150 MB barrier.

Connecting via WI-FI is convenient, but there are problems with it. For example, it so happens that the user cannot understand why the iPhone is not connecting to Wi-Fi. It would seem that he entered all the data correctly (meaning the password), chose the network, but it is impossible to access the Internet via a smartphone.

Many people use a wireless (WI-FI) internet connection, and there are many reasons for this. First, Wi-Fi provides more mobility than wired connectivity, obviously. Secondly, in the case of a wireless access point, the user has the opportunity to use several devices at the same time, while you cannot connect, say, a tablet and a smartphone to a cord.

Connecting via WI-FI is convenient, but there are problems with it. For example, it happens that the user cannot understand why the iPhone is not connecting to Wi-Fi. It would seem that he entered all the data correctly (meaning the password), chose the network, but it is impossible to access the Internet via a smartphone.

Read about how to act in such a situation and where to look for a solution to the problem in this article.

Find a second iPhone with mobile internet

After updating iOS, you distribute your mobile Internet to update your friend’s iPhone firmware and everyone is happy.

How to update iOS on iPhone without Wi-Fi!?

Public in VK: Advertising on the channel: Hello! Recently,

IOS update without WI-FI on different versions of iPhone

In general, all smartphones from Apple are equipped with the same root functionality, they differ only in details. The above update methods are relevant for smartphones such as iPhone 5s, 6 and 6s, 7, 8.

Find a laptop or MacBook

The situation is as follows, we could not find an iPhone nearby to update the firmware, but since there was a working laptop nearby, the idea came to distribute the Internet to it using a USB cable. Then run the iTunes program on the laptop, and use it to update iOS.

  • Turn on iPhone Modem Mode
  • We connect the iPhone and the laptop with a USB cable, if there is no cable, then you can try to connect via Wi-Fi
  • Launch iTunes, click the button with the iPhone image (1), select the Browse section (2) and click the Refresh button (3)

If you have an unlimited mobile internet plan, you can continue and your iPhone’s firmware will be updated.

But at that time, we had about 1 GB of mobile traffic left, and the iTunes program displays the volume of the iOS update. 2.5 GB, I don’t know why there is such a huge difference, because in the iPhone software update, the update size is 306 MB In general, we stopped the process of downloading the firmware in iTunes and decided to look for another solution.

All of today’s instructions can be applied not only to update the iOS firmware, but also to download items larger than 100 or 150 MB. That is, any applications, podcasts, etc.

It turned out that if there is a MacBook nearby, then you can distribute the mobile Internet to it from your iPhone, then turn on the Internet distribution in the MacBook, connect to it using a different communication protocol and update the firmware.

In our case, described below, we will connect the iPhone to the MacBook, distribute the Internet to this Mac, then distribute the Internet from the Mac back to the iPhone, but already via Wi-Fi, and update the firmware, here are the praises:

  • We connect to the MacBook (the operating system at that time. Sierra 10.12.5) iPhone using a native USB cable (if there is no native one, then use certified cables).
  • In the iPhone, turn on the modem mode and select. USB only
  • As soon as the Internet appears in the MacBook (this can be checked in the Safari browser), launch the System Preferences in the lower dock of Mac OS and select the Sharing icon
  • In the general access settings, in services, click on. Shared Internet (1), in the General connection section, select. iPhone USB (2), Ports put a tick Wi-Fi (3)
  • If you are going to often use the described scheme, then you need to go to Wi-Fi Settings, select the WPA2 Personal security protocol and enter the password twice below that will protect the connection. We skip the 5th point, since we will not constantly use this connection.
  • Now you need to check the Shared Internet checkbox (4) and in the window that appears, enable Wi-Fi (5), confirm. Enable.
READ  Save video to iPhone app

That’s it, the distribution of the Internet from the MacBook is turned on, launch the Settings application. Wi-Fi. turn on Wi-Fi and select the MacBook in the list of networks. Now, using such a ring connection, you can go to Settings. General. Software Update. Download and install the new iOS firmware into your iPhone.

This connection can be used not only when updating, but also to bypass the limitation when downloading any files exceeding 150 MB.

The iPhone operating system requires periodic updates, because this is the only way the manufacturer is able to protect the device from viruses. In addition, new applications and games require a system that can read the code in which they are written. A user who neglects iOS updates runs the risk of encountering a refusal of applications from work, besides, the phone will significantly lose in protection from viruses.

How to update IPhones without wifi IOS 14

The best and most economical way to get the latest software version is to download it while your phone is connected to WI-FI. The WI-FI connection works faster and more stable than the mobile Internet, besides, in this case, the issue of traffic consumption disappears.

Why you need to update iOS on iPhone

Application and game development is one of the most dynamic areas in the IT industry. Developers improve their creations on a daily basis, therefore, for the program to work correctly, a system is required that is comparable to the code on which it is written. Even for the old, but modified application to work, a new OS is needed, not to mention fundamentally new developments.

Important! It is not necessary to update the phone, especially if its owner is not keen on new games and applications. The iPhone will work properly on the oldest software versions, but in this case, it is recommended to use the Internet with caution, because in addition to the entertainment function, updates are also created to protect the smartphone from new viruses. Plus, Apple phones are some of the best and most expensive on the market, so it’s better for the owner to get the most out of their Apple device.

Check your router

If you were unable to connect either using a phone or a personal computer (or any other device), then the matter is either in the absence of the Internet, or in the settings of the router. Try to enter the browser from a device connected to this network and go to the modem settings menu. 192.168.0.1 (or another address. depends on the router manufacturer). The connection status will be indicated there. It will make it clear what the cause of the problem may be.

However, we will proceed from the assumption that everything is in order with our network, but the point is, in fact, in the phone (more precisely, in the settings).

Find a second iPhone with mobile internet

After updating iOS, you distribute your mobile Internet to update your friend’s iPhone firmware and everyone is happy.

Updating iPhone Firmware Using Mobile Internet

Dear readers, today I will tell you how to have to be perverted in order to bypass the restriction on file downloads set in the iPhone when using the mobile Internet. Prior to iOS 11, you could download a file of no more than 100 MB using cellular data. We told you how to install an application over 100 MB. here, to bypass the new limit of 150 MB. it turned out. like this.

With the release of iOS 11, Apple has changed the restrictions on file uploads over the mobile network, increasing the limit. Now, using the mobile Internet, you can download files no more than 150 MB. But this is not enough even for a modest firmware update.

For example, our test iPhone 7 has firmware 11.0.2, and to update the phone’s iOS to 11.1, you need to download 306 MB, which is exceeding the limit for downloading over a mobile network.

If you try to update the iOS firmware on an iPhone that only has a connection to the mobile Internet (3G or LTE), then in Settings (General. Software Update) the Download and Install button will be grayed out. And below the inscription:

Wi-Fi connection required to download this update.

Since at the time of this writing we are almost in the field, we do not have the opportunity to find a wired unlimited Wi-Fi access point and calmly update the firmware. Therefore, we have found a couple of alternative solutions that may someday be useful to you.

Find a laptop or MacBook

The situation is as follows, we could not find an iPhone nearby to update the firmware, but since there was a working laptop nearby, the idea came to distribute the Internet to it using a USB cable. Then run the iTunes program on the laptop, and use it to update iOS.

  • Turn on iPhone Modem Mode
  • We connect the iPhone and the laptop with a USB cable, if there is no cable, then you can try to connect via Wi-Fi
  • Launch iTunes, click the button with the iPhone image (1), select the Overview section (2) and click the Refresh button (3)

If you have an unlimited mobile internet plan, you can continue and your iPhone’s firmware will be updated.

But at that time, we had about 1 GB of mobile traffic left, and the iTunes program displays the volume of the iOS update. 2.5 GB, I don’t know why there is such a huge difference, because in the iPhone software update, the update size is 306 MB In general, we stopped the process of downloading the firmware in iTunes and decided to look for another solution.

All of today’s instructions can be applied not only to update the iOS firmware, but also to download items larger than 100 or 150 MB. That is, any applications, podcasts, etc.

It turned out that if there is a MacBook nearby, then you can distribute the mobile Internet to it from your iPhone, then turn on the Internet distribution in the MacBook, connect to it using a different communication protocol and update the firmware.

In our case, described below, we will connect the iPhone to the MacBook, distribute the Internet to this Mac, and then distribute the Internet from the Mac back to the iPhone, but via the Wi-Fi network, and update the firmware, here are the praises:

  • We connect to the MacBook (the operating system at that time. Sierra 10.12.5) iPhone using a native USB cable (if there is no native one, then use certified cables).
  • In the iPhone, turn on the modem mode and select. USB only
  • As soon as the Internet appears in the MacBook (this can be checked in the Safari browser), launch the System Preferences in the lower dock of Mac OS and select the Sharing icon
  • In the general access settings, in services, click on. Shared Internet (1), in the General connection section, select. iPhone USB (2), Ports put a checkmark Wi-Fi (3)
  • If you are going to often use the described scheme, then you need to go to Wi-Fi Settings, select the WPA2 Personal security protocol and enter the password twice below that will protect the connection. We skip the 5th point, since we will not constantly use this connection.
  • Now you need to check the Shared Internet checkbox (4) and in the window that appears, enable Wi-Fi (5), confirm. Enable.

That’s it, the distribution of the Internet from the MacBook is turned on, launch the Settings application. Wi-Fi. turn on Wi-Fi and select the MacBook in the list of networks. Now, using such a ring connection, you can go to Settings. General. Software Update. Download and install the new iOS firmware into your iPhone.

This connection can be used not only when updating, but also to bypass the limitation when downloading any files exceeding 150 MB.

BYRGPUB.COM 2021