Update via MiFlash in Fastboot mode

A more complex, but safe way to answer the question: how to update Android on Xiaomi, is to install the firmware via the Xiaomi app.

  • create a system image in case you need to rollback;
  • computer;
  • install the MiFlash program on the PC;
  • download a file from the official site like TGZ;
  • USB cable.
  • Run MiFlash utility on the computer.
  • Create folder for extracted files.
  • Unzip data.
  • Turn off smartphone.
  • Hold down the volume down and power key for 10 seconds.
  • Make sure the phone turns on in FastBoot mode.
  • Synchronize a gadget with a PC via a cable.
  • A notification about the new device should appear on the app screen. (if there is no notification, then you should check the USB wire for integrity, check the relevance of the drivers).
  • Select the Select key and specify the path to the previously created folder with files.
  • At the bottom of the window, select the “Clean all” item for the optimal update installation mode without failures.
  • Press the Flash key to start the process. (you can track progress using the built-in indicator in the program).
  • Wait for the notification of the end of the flashing to appear in the results column.
  • Stop pairing PC and smartphone by disconnecting the cable.
  • Press the power button until the company logo appears on the screen.
  • when choosing the method of installing updates, it is recommended to select the “Clean all” mode, as it is safe and completely cleans the smartphone data, replacing them with new ones. Option “SaveUserData”. will save user settings, but does not guarantee failure. The item “Clean all and Lock” will clear the phone’s memory and lock the bootloader. in case of unforeseen problems, the gadget must be restored at the company’s service center;
  • Loading the smartphone after the update takes quite a long time. up to 40 minutes. This is due to the configuration of the system to work with new injections;
  • when following the algorithm, even a “ripped” gadget can be flashed through the utility.

How to update “Android” on Xiaomi

Firmware

  • download the required update from w3bsit3-dns.com or a similar resource.
  • place the archive on the device’s memory card. (it is advisable to create a new folder).
  • Reboot the smartphone in RECOVERY-mode by turning off the gadget and holding down the power volume keys.
  • Format the phone without touching the memory card through the appropriate menu in TWRP.
  • Select “Wipe” and sub-items: Cache, System, Date, Built-in memory, Intermediate dump of the virtual machine.
  • Confirm Action.
  • After cleaning, return to the main engineering menu and select the “Install” section.
  • Specify the path to the file with the archive of the new firmware.
  • Confirm system request.
  • The update installation process will start.
  • Wait for the smartphone to restart.

The gadget will launch with the updated MIUI or Android.

The first start-up of the phone can take up to 90 minutes and this is not a cause for concern.

Important! Before any action with changing the system, you should do BackUp to restore your smartphone in case of unforeseen difficulties.

Please note that unofficial tampering with the phone’s firmware will void the warranty service.

Android update on Xiaomi smartphones

Firmware

  • download the required update from w3bsit3-dns.com or a similar resource.
  • place the archive on the device’s memory card. (it is advisable to create a new folder).
  • Restart the smartphone in RECOVERY-mode by turning off the gadget and holding down the power volume keys.
  • Format the phone without touching the memory card through the appropriate menu in TWRP.
  • Select “Wipe” and sub-items: Cache, System, Date, Built-in memory, Intermediate dump of the virtual machine.
  • Confirm Action.
  • After cleaning, return to the main engineering menu and select the “Install” section.
  • Specify the path to the file with the archive of the new firmware.
  • Confirm system request.
  • The update installation process will start.
  • Wait for the smartphone to restart.

The gadget will launch with the updated MIUI or Android.

The first start-up of the phone can take up to 90 minutes and this is not a cause for concern.

Important! Before any action with changing the system, you should do BackUp to restore your smartphone in case of unforeseen difficulties.

Please note that unofficial tampering with the phone’s firmware will void warranty service.

Updating the smartphone through the Recovery mod

In the case when the phone cannot be updated with system tools, the engineering menu will help.

To install the firmware, you will need to install an alternative RECOVERY, due to the fact that the official does not have such an option.

TWRP is considered a reliable program for improving the capabilities of a smartphone, so the method will be described using this utility as an example.

  • the presence of user Root rights;
  • unlocked bootloader.

Informal ways

An unofficial method for installing custom firmware is based on using the Recovery utility, which is installed in the smartphone’s memory. The user then downloads the version of the software they like. The program recognizes files like update.zip, so the user renames the archive with the files. After launching the utility, you must select the Recovery mode and specify the procedure for Install update.zip to System One. After the file transfer is completed correctly, a request is made to restart the smartphone.

The second method is based on Fastboot mode, which is activated on Xiaomi products by simultaneously pressing the power activation and volume down buttons. Key manipulation is performed after the phone is powered off; Before installing the firmware, you need to download and install the MiFlash utility. The firmware files are unpacked into a separate folder, the link to the distribution kit is indicated in the MiFlash program window. After pressing the Flash key, the reprogramming of the smartphone begins, which does not require user intervention.

READ  How to put your phone into Samsung tone mode

The methods allow you to install new firmware on Mi5S phones and other smartphones from Xiaomi. Informal techniques require unlocking the bootloader lock, which protects the operating system kernel. Devices manufactured before the fall of 2015 had an unlocked bootloader, but with subsequent updates, an automatic lock occurred. Removal of protection is made through the filing of an official request. After reprogramming, it is recommended to restore the lock, which increases the safety of the Xiaomi smartphone.

Unlock BootLoader

To install the firmware via third-party software, you must cancel the download ban.

Important! Before starting the action, it is recommended to do a full BackUp of the system.

There are two options to bypass Xiaomi lock:

  • Go to the company’s website in the UnLock section and send a request to cancel the boot block. You will need authorization in the system and an indication of the reason for the need to unlock. The application will be reviewed within 10 business days. After disabling the restrictions, you will need to download the application on PC UnLock MiFlash and follow the user’s instructions.
  • The second option is not official, but it works. You will need to install the ADB program and the recommended drivers for the gadget. Open the utility window and connect the smartphone to the computer in FastBoot mode (turn off and hold down the volume and power keys).

A detailed analysis of blocking bypass is described in the video tutorial:

  • Launch PlayMarket on your phone and find the official app.
  • Download program.
  • In the settings menu, allow superuser access for the utility.
  • Wait for the gadget to be recognized and mark it.
  • Find the previously downloaded archive from the recovery and select the download through the engineering menu.

How to Update Android on Xiaomi Phone

When the update is complete, the smartphone will automatically reboot.

When the update is complete, the smartphone will automatically reboot.

It is suitable for owners of smartphones for which support is discontinued or the transition to a new version of Android is not provided by the developers:

  • Redmi series: all models released before Redmi 4 and its modifications (inclusive);
  • Redmi Note series: all models released before Redmi Note 4 and its modifications (inclusive);
  • Mi series all models up to Mi 4 and its modifications (inclusive).

You can find it using Google or Yandex at a request of the form: phone_model firmware site: w3bsit3-dns.com/forum. The most convenient and easiest way is to reflash a smartphone from TWRP custom recovery.

Download the firmware files only from the official website, as any slightest virus can destroy the system. The exception is custom firmware for experienced users, they can be downloaded from thematic forums.

Official way

The firmware distribution kit is pre-downloaded from the technical support section of the smartphone manufacturer’s website. When selecting, you need to specify the phone model, then a list of firmwares will be displayed on the screen, which indicates the version of the base Android system and the modification of the Miui shell. To save a file to a drive or hard drive, you need to click on the download start button.

The size of the distribution kit is 1.5-2 GB, the download duration is 30-200 minutes (depending on the bandwidth of the communication channel). When downloading, you should select the global firmware. Developer version is used by program developers and testers.

The manufacturer has provided the ability to automatically install new software versions. In the update settings menu, select the item that allows automatic download and installation of files. The transfer of program components via a Wi-Fi communication channel or a combined method (via Wi-Fi and a wireless 4G Internet connection) is provided. The user can block the download by checking the box opposite the “do not update” parameter.

To install Android 7 on a Xiaomi Redmi 3 or 3S smartphone, you will need to follow the steps:

For phones Mi A1, Mi A2, Mi A2 Lite and Mi A3 from the Android One lineup, the new OC has already been officially released. You can check the available update file by visiting “Settings” and opening the item “About phone”.

Instructions: how to update Xiaomi to Android 9

Finally, let’s get down to practice. Many users know that the update has already been released for their model, but they are not aware of how to install it correctly. There are several methods. official (using OTA technology) and semi-official (using recovery and Fastboot). Let’s consider each in order.

Three point firmware

If your Xiaomi does not see new versions, you can use the three-point update. The process is similar to the previous one, except that you need to find the firmware file yourself.

Download the firmware files only from the official website, as any slightest virus can destroy the system. The exception is custom firmware for experienced users, they can be downloaded from thematic forums.

To update through the official website, we need a phone with Internet access, or a PC and a USB cable for a smartphone.

Find on the official website the most recent version suitable for your phone and download it.

After downloading the file, place it on the Xiaomi memory card in the downloaded_rom folder, you can do this using a USB cable if you downloaded the file from a PC, or by transferring it if you used a phone.

Next, you need to go to Settings. About phone. System update.

The update process will begin. After its end, the device will automatically reboot into the already updated system.

Install Android 10 On ANY Xiaomi Device (IN DEPTH TUTORIAL)

It is strictly forbidden to migrate from one firmware version to another. That is, if the weekly version is installed on the smartphone, we set the weekly version, if stable. stable. If you select a different version, all files on the phone will be deleted, and the smartphone will return to factory settings.

If a window with an error appears when choosing a firmware, then the versions of the current and the installed system do not match. Also try to transfer the file to the device again, perhaps it was not written correctly.

READ  Call Recorder on Android 9 Samsung

Updates may not come automatically due to server overload, so users from different cities receive notifications at different times. Otherwise, Xiaomi’s servers will simply “collapse” and no one will be able to update. Therefore, if you have not received a notification about the new version, download it on the official website and install through the “three dots”, there is nothing complicated about it.

With the correct choice of the version, all available information will be saved on the phone, and the flashing process will take no more than half an hour.

The size of the distribution kit is 1.5-2 GB, the download duration is 30-200 minutes (depending on the bandwidth of the communication channel). When downloading, you should select the global firmware. Developer version is used by program developers and testers.

How to install Android 11 In Any Xiaomi Devices Without Custom ROM | ANDROID 11 IN MIUI 12

Updating via TWRP

Implementing a new firmware using custom recovery is also a good option, suitable mainly for experienced users. We will need the shell file itself and the official Recovery utility.

Do not forget to make a backup before starting the operation, otherwise you will lose all important data!

Update via MiFlash (Fastboot)

We will briefly describe what needs to be done, detailed instructions on firmware via Fastboot are available in a separate article.

  • Need to unlock bootloader.
  • Download MiFlash program.
  • Select the correct archive with firmware for your model for firmware in Fastboot mode.
  • Follow the instructions from the article (link at the beginning of the paragraph).

Once the update is installed, the smartphone will turn on. Do not turn off or restart the device during the update!

If there is an update, you will see a message about this immediately after connecting to the network (in other cases, only when connected to Wi-Fi) in the notification panel. Just click on the message.

In addition, the number will appear on the Settings icon.

In the updates section, you will see the phrase “Check for Updates”.

Then, if there are updates, the corresponding information will appear. Click on the “Update” button.

After downloading the update, click “Restart”.

Once the update is installed, the smartphone will turn on. Do not turn off or restart the device during the update!

After the update, you will see a corresponding notification.

Clicking on the notification will show you what’s new in the update.

It should be remembered that the flagship devices are usually updated first, giving them priority, and then the rest of the devices. Plus, Redmi’s lineup is usually only updated once, so if the device was originally running Android 8.1, it’s likely that you won’t get Android 10.

31c60ffd-bed7-46e1-a870-7cd3de839366.png (198.52 KB, Downloads: 80)

First of all, let’s clarify a couple of things. If someone has not yet received MIUI 11, then do not expect it to arrive immediately from Android 10. I would also like to note that when updating MIUI, the user usually sees changes on the face, and Android updates are mainly internal changes that are hardly noticeable. Therefore, if you upgrade to Android 10, you are unlikely to notice any significant changes.

Now let’s get to the main question of this topic.

When will I receive the update to Android 10?

There are currently no official exact update dates, neither for MIUI devices nor for Android One.

At the moment, we only know that Mi 9 and Mi 9T Pro / Redmi K20 Pro are already receiving their updates to Android 10. If you are the owner of Mi 9 and Mi 9T Pro / Redmi K20 Pro, and you have not received an update to Android 10 yet. you just have to wait. Show some patience. Also, thanks to the posting of the source code that I talked about in this thread. you can be sure that the Mi 8, Mi Mix 2s, Mi Mix 3 and Pocophone F1 models will soon receive an update to Android 10 without knowing the exact date.

Let’s try not to fill the Mi community forum with topics, with questions. “When will the Android 10 update arrive?” etc. Since the update will still NOT arrive earlier. Thanks.

As for the rest of the devices, there is still no official information here either, so it remains only to watch how the Chinese MIUI beta is updated to find out which devices have been updated or will be updated to Android 10, including Mi Max 3, Mi Note 10, Redmi K30, Redmi Note 8 Pro, Mi 9T / Redmi K20, Mi 9 SE.

It should be remembered that the flagship devices are usually updated first, giving them priority, and then the rest of the devices. Plus, Redmi’s lineup is usually only updated once, so if the device was originally running Android 8.1, it’s likely that you won’t get Android 10.

As for Android One, Mi A2, Mi A2 Lite and Mi A3, they will receive an update to Android 10 very soon, probably in the first quarter of 2020.

On the Mi Forums, reports began to appear that the update to Android 10 caused several bugs in Redmi Note 7, the most notable of which concerns the camera. Smartphone displays “Cannot connect to camera” message when user enables Slow Motion mode. Neither clearing application data nor resetting smartphone settings help fix the error.

On the Mi Forums, reports began to appear that the update to Android 10 caused several bugs in Redmi Note 7, the most notable of which concerns the camera. Smartphone displays “Cannot connect to camera” message when user enables Slow Motion mode. Neither clearing application data nor resetting smartphone settings help fix the error.

In addition, users complained about the inability to connect to Wi-Fi, as well as problems with stability and performance.

The update for Redmi Note 7 has the designation V11.0.1.0 QFGEUXM.

Xiaomi‘s stable global firmware contains the words “MIUI Global” or “MIUI Global” in the name and the version number (9, 10). This is followed by a version in the format of 3 or 4 numbers, where the latter is usually 0. It looks like “10.0.1.0” and also contains an alphabetic code. In the middle of this code, the letters “Mi” or “RU” must be present (it also happens).

READ  How to reset the fitness settings of the Xiaomi bracelet

Upgrade over the air (three points)

OTA update is the most comfortable, fastest and easiest option for beginners. We described the full procedure in this article, here we will duplicate the instructions.

First, you need to download the firmware from the official website, which is suitable for your mobile device. Next should indicate which version of the operating system and MIUI the shell is based on.

After we go to the settings menu on the smartphone, we go down to the item “About phone“. Go to “Updates” and download the previously downloaded archive.

How to find out the current Android version on Xiaomi Redmi 6A

It is recommended that you check the current firmware version before installing updates. Your phone may already have up-to-date Android and no update is required.

  • Open smartphone settings.
  • Go to the section “About phone”.
  • Find the item “Android version”.
  • This section will indicate the current firmware version. At the beginning of 2020, the current OS is Android 10, but very soon Google will release another update to Android 11.

    Preparatory stage

    Despite the fact that each subsequent version of the firmware carries a lot of new functions, after the update, some smartphones work unstable. This happens when the user ignores the preparatory phase.

    Before installing updates on Xiaomi Redmi 6A, you need to meet 2 basic requirements:

    • charge your smartphone at least 30%;
    • reset to factory settings.

    And if everything is clear with the first point, then the second one raises many questions for some people. Resetting to factory settings completely deletes files from the smartphone’s memory. This avoids errors when installing updates.

    Of course, no one wants to lose personal data, so you need to create a backup before resetting:

    • Open the settings.
    • Go to the “Memory and backups” section.
    • Click on the heading “Google Drive”.
    • Activate backup.

    Following these steps will result in the backup file being uploaded to the cloud storage. After updating Android, it can be restored.

    If there is not enough space on Google Drive to save all the data, it is recommended to create a backup via the “Copy and Restore” item. The resulting file should be moved to another device (for example, a computer) for the duration of the flashing, and after the process is completed, return it back to the phone’s memory.

    If the backup has been successfully created, you can safely proceed to roll back the phone to the factory settings:

    • Run device settings.
    • Go to the “Recovery and reset” section.
    • Select the item “Reset settings”.
    • Click the “Reset Phone Settings” button.
    • Confirm the operation.

    Now you need to restart your smartphone, and then go directly to the process of installing a new firmware.

    Manually via Recovery Mode

    This option is similar to the previous method due to the fact that the firmware file must first be downloaded to the phone. But the rest of the process will be very different, since for installation you will need to go to the engineering menu (Recovery Mode).

    To go into recovery, you need to turn off the device and hold down the power button and the upper volume rocker for a few seconds. If nothing happened, you should change the combination to the power button and the lower rocker.

    Provided that everything is done correctly, the recovery menu will light up on the screen. It uses the volume buttons to navigate, and confirms the action by pressing the power button.

    You need to select the “Reboot system now” item if you want to perform an over-the-air update. The “Apply update from ADB” parameter is responsible for installing the firmware from the internal storage, and the “Apply update from SD card”. from the memory card. By selecting the appropriate item, it remains to confirm the operation and wait for the end of the process.

    Manually through settings

    This option is suitable for those cases when the smartphone cannot find an update over the air. To install the current firmware version, you first need to download the installation file from the developer’s official website. After placing the zip file in the device memory, you need to do the following:

    • Open phone settings.
    • Go to the system update section.
    • Press the button with three dots, and then click on the heading “Select firmware file”.
    • Specify the folder where the zip file was saved.
    • Confirm installation of updates.

    The further process will not differ from the one that was presented earlier in the updates over the air. That is, the smartphone will reboot, and after installing the firmware it will be ready for use.

    Ways to Update Android on Xiaomi Redmi 6A Phone

    The Android operating system can be updated in a variety of ways. There are both classic and alternative options. It is recommended to consider the update methods in the order in which they are presented in this material.

    By air

    This is the easiest and most common way to update your phone. The main condition, in addition to performing the preparatory procedures, is the presence of an Internet connection.

    To install a new Android, you will need:

    • Go to device settings.
    • Go to the section “About phone“.
    • Select “System Update“.
    • Press the “Update” button.

    Then the phone will automatically search for updates. If they are available for this model, you will be prompted to download the firmware file and click the “Install” button. After that, the device will reboot and be ready for further use.

    Xiaomi Redmi 6A phone update

    For several years since the release, smartphones have continued to be supported by the manufacturer. All this time, the user receives updates that add new functions. To update Android on a Xiaomi Redmi 6A phone, you need not only to follow a few simple steps, but also to prepare for the procedure.

    BYRGPUB.COM 2021