How to flash Xiaomi Redmi 4 Pro (Prime, Premium) on Android 10

If you occasionally sew your phone, or have never done this at all, but you want to breathe into the old, but quite working “horse” Xiaomi Redmi 4 Prime/Pro/Premium new life, then this article will help you.

According to this instructions, the author of the article reflash his Xiaomi Redmi 4 Prime phone with the original (factory) firmware (Miui10, Android 6) on a custom, that is, not released by the phone developer, but already built on Android 10. Yes, yes, Android 10. And this is for the phone released back in 2016.

The article shows one of the simplest (but far from the only) ways of lining the phone. To get the best result, it is recommended to save all the data from the phone and completely clean the phone’s memory during the firmware (paragraph 3.2). Of course, you can not do this. But the developers of custom firmware and experienced users recommend complete cleaning to minimize possible bugs after such an installation.

Attention. Everything that you do with your phone, you perform at your own risk. Neither the author of the article, nor the administration of this site, nor the developers of the firmware or other applications are responsible for any development of events. But do not worry. Even if something happens, then the repair master will eliminate almost any problems with your phone.

Links to files in this instructions are intended exclusively for the phone specified in the title of the article. An attempt to flash with these files another phone will entail its inoperability. But this is not scary either, the masters will easily cope with this, of course, for your money.

The procedures not described in this article, as well as a solution to possible failures when firmware can be found on the Internet. But this instruction is so simple that, as a rule, no errors should arise.

Today the firmware of the phone is extremely simple and not at all scary. All that is needed is to perform the following steps in order: Synchronize all your data with Google: Settings. Synchronization. Google. more. synchronize now.

Go to Google Contacts on the computer and check that the number of contacts there coincides with their number in the phone’s notebook. If not (personally I have never coincided), then complain to Google and be sure to complete paragraph 1.4.

In Google photo, make sure all the necessary photos and videos are synchronized with your Google account. To do this, in Google photo click the menu icon. Settings. Synchronization. synchronized folders and mark all the folders you need for synchronization.

After that, click on the profile icon in the upper right corner and make sure that everything is synchronized. If not, then turn on Wi-Fi and wait until the phone synchronizes.

one.2. Write down a separate login and password to your Google account, as well as save logins and passwords to all available applications (mail, messengers, etc. Do not transmit this data to anyone!

update, android, xiaomi, redmi
  • Do not use Google applications (for example, Google Photo, Google Keep, Google Calendar and others.),
  • either use not only these data storage programs,
  • or store the data you need in other applications,

one.4. In paragraph 1, we have already synchronized contacts with Google account. But it will not be superfluous to maintain contacts on the memory card or other reliable place. To do this, open the Play Market and enter in the search for Backup Contacts VCF.

Install any program you like on the phone and make a copy of all your contacts in VCF format in it. Find the resulting file on the phone and copy it to any place (computer, flash drive, etc.P.).

Download files and programs for firmware Download custom firmware (1.1 GB) at the link. (The source of the firmware and its author on Hithabe) and download the custom nucleus (13 MB)

(when installing other firmware, only an archive with firmware is often enough). Write down the downloaded archives on the memory card and insert the card into the phone.

2.3. In the phone settings, select “On the phone” and click 7 times on the “assembly number”. There will be a message that you are a developer. Go to additional settings. for the developer and turn on USB debugging.

2.4. If you have already unlocked the bootloader, or non.original firmware has already been installed, during which the bootloader has been unlocked, then pass this step.

Run the program and unlock the bootloader, following the instructions in the program window. In this case, your computer should be connected to the Internet.

2.4. Download to the computer and unpack the archive from the recovery (TWRP).

We flash the phone Turn off the phone. Connect the phone to the computer cable. Squeeze the VOLUME buttons.”And Power, release the buttons when the phone enters the Fastboot mode (a screen with a hare will appear).

Launch Flash-Twrp.BAT and wait until the recovery is installed.

If everything is fine, then the phone itself will load into the recovery. After that, wait for about one minute during which the phone can automatically restart.

How to update Miui firmware on Xiaomi phone

Below are phased instructions for updating Miui. Using them, you can update your smartphone to the current firmware version.

Automatic update “by air”

This is the easiest and fastest method. If you have a stable global, European or Russian firmware, new assemblies should fly about once a month. You will only need to give permission to download and restart the phone to install a fresh version. Thus, only official (non.custom) firmware can be obtained. The following conditions must also be met:

To find out if there are new updates, you need:

If the update is available, click “Download”. 5. Wait for the end of downloading and click “Reload”. 6. Wait 5-10 minutes while the phone will be updated. At this time, you can not independently restart or turn it off.

You can also enable automatic loading of new versions and installing the update at night when the smartphone is not used. To do this, on the page with updates, click on three points in the upper right corner and select “Settings”. We activate the sliders opposite “download via wi-fi” or “download through mobile Internet”. When choosing the second option, consider that traffic will be spent. A little below we indicate the time during which auto loading is possible.

We also set a check box near “update automatically”. If you want to receive early updates, activate the corresponding line. But be prepared for the fact that some functions or the system itself will work unconditionally due to early updates.

Manual update through “three points”

If we talk about manual installation using OTA, then here the process is a longer. You need to connect the Xiaomi phone to PC, select the right version on your own, download it and transfer it to the memory of a mobile device.

A huge advantage of updating through “three points” is security. The phone is at minimal risk compared to firmware via Fastboot or TWRP Recovery. Therefore, this method is ideal for inexperienced users.

note! You can update only the same versions of miui, namely:

If the phone is installed on the phone, and you will try to put Global through OTA, then the consequences will be sad. In the best case, he will just give a mistake, in the worst. the device is “oxirous”.

As noted above, you can update only the same versions. Therefore, it is important to know the type of its shell.

We open the settings and go to the “On the phone” tab.

We look at the line “version of miui”. If the firmware is global, the letters “Mi”, for example, QcMixm in the name of the assembly. Chinese assembly is designated as “CN”, Russian. “RU”, European. “EU”.

update, android, xiaomi, redmi

one. We go to the global Mi Community forum and open the Rom Downloads tab.

2.Choose your smartphone model.

3.A new window opens, in which the firmware versions are indicated from the side. Click on the desired shell.

5.We are waiting for the end to download the archive.

6.We connect the phone to the computer via USB.cable.

7.We throw a downloaded archive with firmware into the smartphone memory.


Now we begin manual update through the “three points”:

Open the “settings” and go to the “On” phone “section.

Go to the Miui Version tab and press the logo several times. At the bottom of the screen there should be an inscription that additional functions are activated.

Now click on the troetiness in the upper right corner. We need a line “Select the firmware file”.

Indicate the path to the previously downloaded archive using the conductor.

Confirm that you want to restart the smartphone now.

Wait until the device is updated. At this time, do not take any action with a smartphone.

This is how you can update the firmware through the “three points”. Also, the OTA mode allows you to set the full firmware. This is relevant if any functions do not work on the phone, and the bug is associated with the shell.

Firmware via Fastboot and Miflash

This is already an unofficial method that is suitable for experienced users. Fastbut mode will allow you to update the phone to the current version if the assembly “by air” does not fly. Owners of obsolete devices who have ceased to be officially updated often resort to this method.

Standard system update

If you have a smartphone that was created for the international market, then the update process is quite simple.

  • Download the firmware from the official site for your smartphone of the version that you need;
  • Next, copy this file in ZIP format to the root of your smartphone, always placing it in the Downloaded_rom directory;
  • Now in the smartphone settings find the “Update” tab and click on it to run the installer;
  • In the window that opens, you need to click on the tab with three points, and then click on the point “Select the firmware file”;
  • Indicate the path to the archive that you have just thrown into the system and confirm your actions;
  • As soon as the process is completed, the system will automatically reboot, and on the screen you will see an already updated version of the firmware.

Before the installation, the operating system always checks your version and the correctness of its files, so you can be sure of the stable operation of the device. Just download the firmware from the official site.

Android update if updates no longer go to the phone

If the phone is not updated by air or does not start at all, you can always use the recovery mode or recovery.

On a standard, preinstalled recovery on Xiaomi, there is no way to flashing the system. It will be necessary to install modified Recovery, for example TWRP.

We perform all subsequent actions only after receiving a Root-right. If you are not ready to part with a guarantee for a device, this method is not suitable for you.

First you need to install the TWRP itself and unlock the bootloader. If you have installed a Root-right, then the bootloader is already unlocked. If not, we will figure out how to unlock it.

Blocking Bootloader

Unlocking the bootloader is necessary for flashing through TWRP, but it entails a complete formatting of the device. Before the procedure, make a backup.

There are two ways to unlock: official and unofficial.

  • For the official method, you need to go to the unlock site and apply for unlocking the bootloader there. To do this, you will need to register on the site, in the application to indicate the reason for the unlock and wait for approval. Consideration period. from three to ten days. After you were approved by unlocking, you need to download the Mi Flash Unlock program and follow the instructions in it.
  • An unofficial method implies an ADB installation and drivers for a smartphone, you can find them on the official ADB website. After installing the program, we convert the phone into Fastboot mode (volume and power buttons at the same time) and connect it to the computer. Open the console in the ADB folder through the SHIFT button and introduce Fastboot Oem Unlock. Everything, the butloctor is unlocked, reboot the phone.

Install TWRP

  • Download the Offical Twrp App through Google Play.
  • Provide the ROOT access utility.
  • Choose your device and click the “Download Twrp” button.
  • Then select the downloaded file of the recovery and click “Flash to Recovery”.
  • Everything, after that, the smartphone itself will launch a recovery from which the necessary manipulations will be made.

We sew the phone via Twrp

  • First download the firmware you need. Where and how can this be done, indicated above.
  • Zip.Place the file on the memory card.
  • Reloading into the recovery. turn off the device and simultaneously click the power button and increase the volume button.
  • Now you need to clean all sections, with the exception of the SD card. Previously make a backup, TWRP has such a function.
  • Click the Wipe button and check the points Dalvik Cache, System, Data, Internal Storage, Cache and make a swipe to confirm. The smartphone will be completely cleaned. For the correct installation of the firmware, this item is required.
  • After that, we return back to the recovery menu and move to the Install item.
  • Select the firmware file and again make the swipe to the side.
  • The process renewal process will go. It may not be displayed on the screen in any way, you just need to wait a while and not touch the phone.
  • After the installation is over, Zip Install Complete will appear on the screen.
  • Select Wipe Dalvik Cache and Reboot System.
  • The device will be rebooted into an updated system, three points on the screen will indicate about this. The first launch lasts a long time, do not turn off and do not reboot the phone during this period.

All described above perform at your own peril and risk, preferably after the end of the warranty on the device.

update, android, xiaomi, redmi

Comparison Android 6 and 7

To begin with, let’s look at what new has appeared in Marshmallow and Nougat, and are innovations so extensive that it is worth updated because of them.

Не приходит обновление на Андроид | Как обновить Android | Xiaomi Redmi Note 8 Pro | Решено!

The application literally scans the screen, dwelling, for example, at the address from the message sent to you, and instantly shows the location on the map.

As you can see, both versions have their own huge advantages, but do not forget that Android 7 is spared from many flaws and bugs that users have encountered in six. Therefore, nougat is the most optimal solution. We read further on how to get this version for your device.

The main differences between Android 7 and 8

Oreo received quite significant changes, the most important thing of which is improved performance and speed. The developers assure that with the new operating system the speed of the phone will increase by 20-25%, and the battery will hold the charge much longer.

Of course, we do not forget about the mode “Picture in the picture” (separation of the screen), allowing you to view the video on the main screen and at the same time engage in any other matters on the smartphone. What other innovations affected Android, and whether they are very different from Nougat?

Communication with an assistant is implemented, not only voice, but also text queries are recognized.Now all sections are sorted by categories, which allows the user to quickly and comfortably configure his device.

Android 7.0 Android 8.0
There was an opportunity to answer through notifications without going to the messenger. You can euthanize notifications, add indicators to the labels, the appearance of the panel has changed.
Improved work assistant Google. Standard settings menu, only some new points have been added.
Standard update that makes you spend a huge amount of time waiting for loading. Update files are downloaded imperceptibly, the new version will instantly be installed when the smartphone restarts.
The DOZE mode significantly saves the charge due to the suspension of background processes. “Doze” has become even smarter, improved the system of obtaining important notifications in sleep mode.

Of course, it is almost impossible to list all the minor innovations, but they are always very useful while working with the phone, and it is precisely such “insignificant” options that help create an improved opinion about the operating system.

Updates to Android 9 of the Android One (Mi A) line

For phones Mi A1, Mi A2, Mi A2 Lite and Mi A3 from the line of Android One, the new OC has already officially released. You can check the available update file by visiting the “Settings” and opening the “On the phone” item.

We remind you that smartphones from this series are not based on Miui firmware. Their functionality is “clean”, where only the branded Android functions are present without Xiaomi additions. If you want to independently establish a more fresh version of the OS, a CWM Recovery is ideal.

Fastboot update

The following steps will need a computer with Windows. Make sure your device is completely charged or has enough charge. This manual will help update your device to the latest version of miui. All user data will be deleted in this process. Make a backup copy of your data before continuing.

Step 1

Devices marked with a sign. locked down. If your device is blocked, click here to unlock it first. Devices marked with a sign ☆ are unlocked. If your device is unlocked, just follow the instructions below to complete the firmware process.

Download the Xiaomi Community application to quickly receive news about new products and firmware miui.

Step 2

Select the correct MIUI ROM firmware for your smartphone from the list below and download the appropriate firmware file.

Fastboot loading links will be published in the near future. Thanks for your understanding and patience.

(Check the file resolution ‘.TGZ ‘. If he ‘.GZ ‘, then rename it in’.tgz ‘)

Step 3

Turn off the device. Press the volume and power reduction key simultaneously to go to FASTBOOT mode. Then connect the device to a computer with Windows via Micro-USB/USB Type-C cable

Step 4

Up the archiver by the archiver. The uploaded firmware file on the computer and copy the path to the folder with firmware files.

Step 5

Unfusion of the Miui recharge program, loaded in step 1, and on it for installation (if there is a warning of the security system, accept it). After the installation is completed, start miflash.exe and insert the path to the folder with a firmware file copied in the following step into the address line.

Click on the first button (marked with yellow) to update. and Miflash should automatically recognize the device. Next, click the second button (marked with red) to install the firmware on the device.

Step 6

Wait until the execution indicator in MIFLASH becomes completely green, which means that the firmware has been successfully installed. After that, your device should automatically reboot into a new version of the firmware.

(After installing Mi PC Suite, make sure your smartphone is in Fastboot mode, connect it to the computer and select the desired firmware file.)

How to update the Xiaomi smartphone in Fastboot mode

To switch to this mode, on the smartphone, the power and volume buttons are clamped, after which a rabbit should appear on the screen. It is first recommended to install the MIFLASH application, which will allow you to quickly take all the events.

Firmware for Fastboot is downloaded on a computer and is sure to be stored in a folder, in the name of which there are no Cyrillic characters.

  • Launch MIFLASH, select Browse in its menu and specify the folder containing an opened file;
  • At the bottom of the program screen, you need to select the update mode. Three options are available in total. deleting all data (Flash all), saving information in internal memory and saving programs and data.

Next, the update is launched (Flash button). If everything is done correctly, then a green strip of progress should appear on the screen. It remains only to wait for the completion of the operation and then restart the mobile device.