How To Rescan Channels On A Samsung TV

How to Change Country on Samsung TV?

to change the region, the sequence of keystrokes is as follows: MUTE. RETURN. VOL. CH. MUTE (MUTE. mute / unmute the sound. press the “VOL” button, RETURN. arrow). Note: for different series of Samsung TVs, the code above may differ.

How to unlock Smart Hub on Samsung TV?

To unlock Smart-Hub on Samsung TVs, you need a regular (push-button) remote, because you need to change some settings in the service menu. With the TV turned off, you need to press the following key combination in turn (info, setting, mute, and turning on the TV.

How to change language on Samsung Smart TV?

To do this, while watching the high-definition channel on which you want to change the audio language, press the “Menu” button on the remote control, go to the “Installation” menu, the “Preferences” tab, specify in the “Primary audio language” item the name of the language for soundtrack.

How to Remove Channel Lock on Samsung TV?

Problems and possible solutions to unlock the TV

Press the DISP button on the remote control and hold it for 10 seconds (sometimes it helps). If it does not help, take the remote control and instructions.

How to Change Smart Hub Region for Samsung Smart TV?

To change the Smart Hub region on a Samsung TV, you need to reset the TV. This will reset all installed programs, accounts and TV channel settings. To do this, enter the menu by pressing the button of the same name on the control panel: “MENU”.

Environment

To change the region and unlock the TV, you need:

channels, samsung
  • television,
  • ordinary push-button remote control with an extended set of buttons. If you only have a remote control with a simplified set of buttons, you can try using a smartphone with an infrared port, see the article How to unlock Smart Hub on a Samsung TV using a smartphone.

Procedure

  • Make sure your TV is plugged in.
  • Turn off the TV with the red on / off button on the remote control.
  • Enter the TV service menu. To do this, use one of two methods:

a) press the buttons on the remote in sequence: Info Setting Mute Power (TV on / off button),

b) press the buttons in sequence on the remote control: Mute 1 1 9 OK, then after the menu appears, press the buttons 1 2 3 4 in sequence.

As a result, the service menu should be displayed.

  • Go to the Options section in the service menu.
  • Important: Record or photograph the current settings that are visible on the TV screen. This may be needed to restore them if something goes wrong.
  • Select Local Set and replace EU with EU_RS_AFR.
  • Go to MRT Options.
  • Important: Record or photograph the current settings again.
  • Set the following values:. for the Language Set parameter, set CIS. for the Region parameter, set PANUERO. for the PnP language parameter, set Rus. for the WI-FI Region parameter, set Q.
  • Exit the service menu by pressing the Exit button on the remote control.
  • Turn off the TV with the Power (on / off) button on the remote control.
  • Turn the TV back on.
  • Open Smart-Hub.
  • If Smart TV functions do not work and the notification This TV is not fully functional in this region is still displayed. reset the TV to factory settings, then try launching Smart-Hub again.

    Also, in some cases, it may be necessary to perform IP spoofing, see How to perform IP spoofing on a Samsung TV.

    How to Unlock Smart Hub on Samsung TV with Remote

    What should be done

    Change the region to which the TV is tied to get rid of the This TV is not fully functional in this region notification on Samsung TV and get access to all Smart TV functions (YouTube, Netflix and others).

    For which TVs is this instruction

    This manual applies to all Samsung TVs equipped with Smart TV features that were released between 2015 and 2019.

    Links

    In preparing this article, the following materials were used:

    For which TVs is this instruction

    This manual applies to all Samsung TVs equipped with Smart TV features that were released between 2015 and 2019.

    What should be done

    Change the region to which the TV is tied to get rid of the This TV is not fully functional in this region notification on Samsung TV and get access to all Smart TV functions (YouTube, Netflix and others).

    Environment

    To change the region and unlock the TV, you need:

    • television,
    • any remote control with which you control your TV,
    • smartphone or tablet equipped with an infrared port, running Android OS.

    How to Unlock Smart Hub on Samsung TV Using Smartphone

    Procedure

    • Install the RCoid free application from the Play Store on your smartphone and launch it.
    • Select the Download RCoid-file item in the application menu:

    Click the Yes button in the Opened remote control dialog box:

    Select in sequence: S. Samsung. any TV since 2008:

  • Turn on the TV and bring your smartphone to it so that both devices are in direct line of sight from each other.
  • Press the Info button on the virtual remote control of the application, then press the Factory button:
  • As a result, the service menu should be displayed on the TV screen. Further actions can be performed using your TV remote control.

  • Go to the Options section in the service menu.
  • Important: Record or photograph the current settings that are visible on the TV screen. This may be needed to restore them if something goes wrong.
  • Select Local Set and replace EU with EU_RS_AFR.
  • Go to MRT Options.
  • Important: Record or photograph the current settings again.
  • Set the following values:. for the Language Set parameter, set CIS. for the Region parameter, set PANUERO. for the PnP language parameter, set Rus. for the WI-FI Region parameter, set Q.
  • Exit the service menu by pressing the Exit button on the remote control.
  • Turn off the TV with the Power (on / off) button on the remote control.
  • Turn the TV back on.
  • Open Smart-Hub.
  • READ  Factory Reset Samsung TV

    If Smart TV functions do not work and the notification This TV is not fully functional in this region is still displayed. reset the TV to factory settings, then try launching Smart-Hub again.

    Also, in some cases, it may be necessary to perform IP spoofing, see How to perform IP spoofing on a Samsung TV.

    Links

    In preparing this article, the following materials were used:

    Method 2 Decode channels using tuner

    Let’s turn on any (preferably not encrypted) channel. 2. Let’s go to the tuner emulator, for which we use the remote control to dial the numbers 9339 or another combination of numbers, for example, 9766, 9976, 9776, etc., depending on the firmware version:

    Let’s enter the BISS list, which can be empty (if no one has added keys) or with a list of added keys. To add a new code, 2 options can be used:

    Let’s add a new key, for which we press the green button on the remote control in the lower block. When editing a used key, you must first select an unused code from the list, and then press the red button on the remote control:

    • frequency. 10806;
    • ID. 5;
    • key. 10 06 10 00 11 07 11 00.

    By pressing the green button, we will see such a window with an image:

    The alphabetic values ​​of the code are entered using the color keys of the remote control, as well as the P- and P keys. After completing the input of all the data, press the OK button:

    To exit the decoding process, press the EXIT button on the remote control:

    Advice If there is no BISS encoding in the list, select any encoding from the list, then you need to enter it and add an “empty key”, while entering CAID 2600. After entering the encoding, press the green key on the remote control, enter the key (see figure below) and click on OK to save.

    Method 1 Decoding using a computer and the necessary software

    • ProgDVB software (frequently updated, free, well working);
    • plugin MD Yankse 1.32.1 TT (allows you to monitor the selection of keys) or similar programs (S2emu, CAPi, EmuNation, vPlug, PSoftcam, Card Server Client (CSC));
    • Softcam Server 1.2.2 utility. designed to download constantly changing decryption algorithms and keys, as well as to generate files on their basis ‘Keys.bin’, ‘Softcam.key’, ‘Easy.Keys’;
    • satellite TV system (antenna with convector).
    • download SoftCam.Key;
    • save by specifying the ProgDVB directory: SoftcamLocation = c: \ ProgDVB;
    • install automatic update every time the program is started: ServerMode = 0;
    • specify ManualMode = 1 to re-save files without confirmation;
    • specify the names of the key files: SoftcamName = Softcam, KeybinName = Keys, KeysfileName = Easy;
    • install the plugin MD Yankse 1.32.1 TT, for which we unzip it into the ProgDVB folder.

    We decrypt the encrypted channels using Yankse (highlighted with red ticks) by clicking on them with the mouse, then wait 5-6 seconds. Yankse settings are changed in the Plugins. Yankse menu. Decryption complete.

    by admin

    Satellite channels for the most part are encrypted, and their legal decoding costs a lot of money. However, there are quite affordable ways to decode paid satellite channels. We will talk about the most common and relatively simple decoding ways further.

    InDevices.ru

    InDevices.ru. the latest developments in the field of devices, robots, an overview of gadgets

    Method 3 Decode the encoded channel in BISS. encoding

    Select from the list the channel that you want to open (in this case, the CTC International channel, which is broadcast from HotBird), and we will see a window with the following data:

    On the remote control, press the red button (on the lower block), after which a window will appear for entering the BISS key:

    Enter the key (in this case, 11 11 11 11 11 11 11 11) and press the OK button on the remote control, saving this code in the tuner’s memory:

    Worth paying attention The information is presented for informational purposes (broadening the horizons of the reader) and is not a guide to action. It should be noted that watching paid channels in free mode is a violation of the Law, this should definitely be taken into account.

    Please note that any manipulation of the service menu may lead to malfunctions or problems with the TV.!

    Change region on Samsung TV 2019-2020

    In order to unlock Smart-Hub on Samsung TVs 2015-2017 and 2018-2019, you need a regular (push-button) remote control, since you need to change some settings in the service menu. With the TV turned off, you need to press the following key combination in turn: info, setting, mute, “on” and wait a few seconds. If nothing happens, try the second method: mute, 1,1, 9, OK. After the menu appears, press the buttons 1234, then the service menu will appear.

    If this remote control is not available, you can use a smartphone with an infrared port. To do this, you need to install the “RCoid Free” application from the Play Market on your phone. In the application, add a remote control (S. Samsung. any TV since 2008). Next, turn on the TV, from the phone through “RCoid” press “info” then “factory” to get into the extended service menu, then you can use the usual remote control.

    Before changing the settings, we strongly recommend that you take a photo of the screen of all settings so that you can return everything back.!

    In the service menu, go to the Options section.

    In Options, go to Local Set. Item EU Change to EU_RS_AFR Next, in Options, go to the MRT Options section and set the following parameters:. Language Set. CIS— Region. PANUERO— PnP language. Rus— WI-FI Region. Q— Exit the MRT Option section back to the general menu and do Factory reset.

    Next, turn off and turn on the TV again. Done!

    Sometimes, in addition to changing the settings in the service menu, you need to change the IP address. Here’s how to do it.

    Found Ways to Unlock Samsung TV by Yourself

    As our website reported yesterday, many Samsung Smart TV users began to complain about blocking their TVs when Internet functions are completely disabled, and the inscription appears on the screen: “This TV is not fully functional in this region” this region).

    How To Unlock Keys And Factory Restore Samsung LCD TV

    However, enthusiasts have found a solution to the problem. By pressing a special key combination on the remote control when the TV is off, you can access the service menu. In it, you need to change several settings in order to change the region of the TV. However, this does not work for everyone. Then the problem is solved only by an expensive replacement of the motherboard, which costs about 300.

    READ  How to Unlock Samsung Phone 10

    New guide to unlock Samsung TVs with VPN

    If you find an error, please select a piece of text and press CtrlEnter.

    M, Q and LS series

    After the cable from the room, street or general house antenna is connected, and the TV itself is turned on, you need to do the following:

    • Turn on the general menu using the “Home” button on the remote control.
    • Select the “Source” item. In it you need to specify the option “TV”.
    • Turn on the menu again using the same button, select “Settings”.
    • Go to the line “Broadcast” and select “Auto-tuning”.
    • Click the Start button. A warning will appear on the screen stating that as a result the existing list of TV channels will be deleted.
    • Select a signal source. You can specify “Antenna” (for terrestrial digital TV), “Cable”, “Satellite dish”, etc. depending on which TV you are connecting.
    • Select the type of channels. You can specify “Digital” or “Digital & Analogue”. In the second case, there is no need to further configure the connection of each local analog channel, if they are broadcast.
    • If you are setting up paid channels, the interface will ask you to specify the operator. For cable, select “Others”. Since terrestrial television does not have this parameter, we just move on.
    • Specify the mode in which the search will be carried out. Select the “Full” option. In this case, the system will search for everything that can be caught from the antenna.
    • Start the procedure by clicking the “Scan” button.
    • The found channels will appear on the screen (both TV, separately digital and analog, and radio stations) and an indicator showing which part of the range has already been scanned.
    • After the completion message, press the “Close” button and exit the menu (on the remote control. “Return”).

    Removing unnecessary channels and adjusting the order

    To delete unneeded channels, proceed as follows:

    • Open the menu, go to the settings section and select “Broadcast”.
    • Go to “Change channels“.
    • Using the “Enter” button, tick the boxes that should be deleted.
    • In the side menu, select the “Delete” item.
    • Press the “Yes” button to confirm and switch the TV to normal mode. Immediately after that, you can make sure that unnecessary channels are gone.

    If we are talking about Samsung Smart TV, then removal is easier there:

    • Using the “Smart Hub” button you need to go to the system hub.
    • In the form with the listed channels, you must select the editing section (usually it is on the right in the upper part of the table).
    • Guided by the prompts of the system at each step, you can select all unnecessary TV channels and delete them.

    As for the order of the channels, the TV arranges them in two ways:

    • independently in the order in which I could find them during autotuning;
    • using the list sent by the operator (as, for example, when connecting to NTV channels).

    In the second case, sorting is impossible: you cannot reconfigure what the operator has set, you can only delete unnecessary channels. In the first, the sort looks like this:

    • Go to the menu, select “Settings”.
    • Click on “Broadcast” and enter the “Advanced Settings” tab.
    • Select “Change. channel number ”and indicate“ Enable ”if the item is highlighted. If it is inactive, then go to the next step.
    • Select the “Change channel number” item or go to the “Live broadcast” section (depending on the interface option).
    • Here you need to open the “Channel List” tab and go to the “Channel Change” item.
    • The desired TV channel is selected using the “Enter” button on the remote control, next to it the checkmark icon lights up.
    • The item “Change number” is selected and using the arrow keys on the remote control the channel is dragged to a new place.
    • Pressing “Enter” again removes the check mark, the result is fixed.

    If necessary, the procedure is repeated the required number of times.

    When sorting channels on Samsung TVs, you need to take into account one of their peculiarities: if the digital ones in the general list are signed and have names, then the analog ones are only serial numbers. Accordingly, when sorting, the picture will be as follows:

    • Digital channels will move in the list, and one of them will take the position of the other.
    • The list of analogue programs will not change, only another program will be received under the old number.

    H, F, E and J Series

    For models of this series, the setup process will look slightly different:

    • Turn on the TV and use the “Source” button on the remote to select “TV”.
    • Open the menu (by the button of the same name or “Keypad” and by selecting the “Menu” item on the screen).
    • Select “Broadcast” and then “Auto Tuning”.
    • Activate auto-tuning again.
    • In the warning message about changing the settings, click the “Start” button.
    • Select the source from which the signal will come: “Antenna” if you are configuring the reception of free broadcasting of the DVB-T2 standard, or “Cable” if you are connecting cable TV.
    • Specify the type of channels. It is better to select “Digital and Analogue” here, so as not to repeat later a separate setting for the analogue programs remaining on the air.
    • Select the scan type. To catch as many channels as possible, you need to select the “Full” parameter.
    • The “Scan” button is pressed.
    • After the end of the process, click the “Close” button and exit the menu.

    Adding local analogue channels

    If from the very beginning during auto-tuning it was indicated that both digital and analogue broadcasting was being searched, then nothing needs to be added, all TV channels have already been found. You also need to remember that some modern TV models no longer support manual tuning of terrestrial channels, they need to re-scan the entire range in auto-tuning mode.

    • Turn on the menu, open the “Broadcast” tab.
    • Select signal source. In our case, this is an antenna.
    • Go to Manual Configuration Mode.
    • Specify search for analogue channels only.
    • Select “Create”.
    • Searching for analogue broadcasting channels will take a few minutes.

    Therefore, first you need to determine which specific TV receiver we are dealing with.

    • Take a look at the back panel. There should be a factory sticker with basic information about the TV: type of power supply, year of manufacture, etc. At the very top there will be a combination of numbers and Latin letters. this is the model code;
    • Go to the TV menu. Select the item “Support” and the item “Contact Samsung”, information about the equipment will appear, including the desired combination of letters and numbers.
    READ  How to broadcast from Samsung to TV

    Let’s decipher the found number in order to determine the letter denoting the series:

    Reset

    Sometimes the absence of a signal may be due to a change in the settings by the provider, software problems in the firmware. In this case, you need to reset the settings to the factory settings, repeat the search.

    Are all T2 set-top boxes compatible with Samsung TVs

    Set-top boxes are universal, compatible with TVs of different manufacturers and models. It is enough to find the T2 marking on the box. this is a digital standard in which television is broadcast on the territory of Russia.

    The set-top box receives a digital signal from the antenna, converts it, transmitting it to the TV screen. To connect a set-top box, you need a connector. As a rule, it is HDMI, “tulip” or Scart.

    The image quality (priority over HDMI) depends on the connection method you choose. Older CRT models use Tulip or Scart.

    How to manually set up a Samsung TV

    Manual search allows you to make more precise adjustments, for example, when not all channels were found, or an unclear image is displayed on the screen. To carry out the operation:

    • on the remote control, press the “Menu” button, then go to “Settings”.
    • “Channel” is selected;
    • here “Antenna” is changed to “Cable”;
    • in the sub-item “Country” after entering the PIN-code (by default 0000), “Russia” or the country where the user lives;
    • further, go to the section “Cable search parameters”. In some firmwares, it is hidden in the “Auto-tuning” menu;
    • the frequency of the channel’s broadcasting is indicated here, the list is located on the website rtrs.ru. The frequency may vary depending on the region of residence, which should be taken into account when searching. Check with the service provider for the channel settings of the cable operators;
    • then, after setting the “Full” and “Digital Channels” marks, the search starts;
    • To save the results, click “OK”.

    What to do if digital channels do not appear on your Samsung TV

    There are situations when, after completing the setup, the channels did not appear on the screen, while the TV / set-top box is working properly. In this case, the problem may lie in the peculiarities of signal reception.

    Do I need a digital set-top box for Samsung TV

    You can connect digital channels on a Samsung TV in two ways: directly, with a built-in DVB T2 type digital signal receiver, or using an external set-top box.

    As a rule, the T2 tuner is mandatory in models released after 2012. The digital tuner is definitely available in the LS, M, Q, H, J, K, F, E series. To tune channels on your Samsung TV, just a few simple steps.

    If an entry-level TV was released more than 8 years ago, there is no SmartTV in it, most likely, to watch digital television, you will need to purchase an external set-top box or a special expansion module (relevant for panels where there is a connector for their installation).

    You can find out if it is possible to set up digital television on Samsung TVs without a set-top box by looking at the model code located on the back panel or in the instruction manual. The series is marked with the third letter in combination.

    Digital TV for old Samsung TVs

    If the instructions do not say that the model has a built-in DVB T2 tuner, then a digital set-top box is needed for the Samsung TV. This is the only way to tune channels, enjoy terrestrial television in HD quality.

    Cable defects

    If the antenna is ok, the problem is most likely in the cable. It is necessary to check it for kinks, including where the plug is connected. If a signal appears when connecting another cable, replace the cable.

    Setting up your Samsung TV for digital broadcasting

    If your model has a digital tuner, it will take no more than 15 minutes to tune digital channels to “Samsung”. It is enough to connect an external antenna and follow the instructions.

    Unlocking Smart-Hub on Samsung TVs 2018-2019 after “This TV is not fully functional in this region

    Samsung this year carried out a new action to deactivate TVs imported illegally. In Ukraine, Moldova, Russia and other countries, Samsung TVs from February 22 display the message “This TV is not fully functional in this region” (“This TV is not fully functional in this region”) when you launch any of the applications in Smart-Hub. This applies to YouTube, Netflix, Megogo and any other services provided by applications.

    1) on the TV turned on, press the buttons on the remote control “Mute”, “1”, “1”, “9”, “OK”. 2) in the menu that appears with the first item “Hospitality mode”, press on the remote control “1”, “2”, “3”, “4” 3) in the new menu that opens, set to Local Set. “EU_RS_AFR” 4) go to the menu item “MRT option”, set the following values ​​in it: 5) Language Set. CIS 6) Region. PANEURO 7) PnP language. Rus 8) Wi.Fi region. Q 9) exit “MRT Option” 10) Do Factory reset through first point

    After that, on a computer with a wired connection (this is important), install a VPN from Tunnel Bear (the service gives you a day for free).

    11) In the Tunnel Bear application, select the server of the country in Europe for which the TV was produced (you can find out by the model labeling). A clear match by country is not required; 12) Install the Connectify application (the service also provides a day for free); 13) Create a Connectifi-WI-FI access point and indicate the Tunnel Bear Internet source in it 14) Turn on the TV 15) We loop everything before connecting the Wi-Fi network, select the Connectify-WI-FI network 16) Immediately after that, a window with an agreement should appear SmartHub. If it exists and you need to give an agreement with two checkmarks, then everything worked out. Otherwise, the TV will immediately warn you during the initial setup that Smart Hub is locked by geolocation.

    “Information like this on Samsung TVs indicates that the TV was manufactured for a different region and may not meet the specifications of the region in which it is located. This excludes the manufacturer’s ability to guarantee the availability of all functions in the user’s country of residence and the actual region of use of the device. Please refer to the user manual for information on availability of functions depending on the region. The company recommends buying products only from official retailers in the region in order to be able to use all the functions of the device, as well as the manufacturer’s support, “Комментарии и мнения владельцев in Samsung.

    BYRGPUB.COM 2021